In this paper, we classify the rotational surfaces with constant skew curvature in $3$-space forms. We also give a variational characterization of the profile curves of these surfaces as critical points of a curvature energy involving the exponential of the curvature of the curve. Finally, we provide a converse process to produce all rotational surfaces with constant skew curvature based on the evolution of a critical curve under the flow of its binormal vector field with prescribed velocity.
We classify the connected pseudo-Riemannian manifolds of signature $(p,q)$ with $q\ge5$ so that at each point of $M$ the skew-symmetric curvature operator has constant rank 2 and constant Jordan normal form on the set of spacelike 2 planes and so that the skew-symmetric curvature operator is not nilpotent for at least one point of $M$.
We construct almost complex algebraic curvature tensors for pseudo Hermitian inner products whose skew-symmetric curvature operator has constant Jordan normal form on the set of non-degenerate complex lines.
The Skew Mean Curvature Flow(SMCF) is a Schrödinger-type geometric flow canonically defined on a co-dimension two submanifold, which generalizes the famous vortex filament equation in fluid dynamics. In this paper, we prove the local existence and uniqueness of general dimensional SMCF in Euclidean spaces.
Let R be an algebraic curvature tensor for a non-degenerate inner product of signature(p,q) where q>4. If $π$ is a spacelike 2 plane, let $R(π)$ be the associated skew-symmetric curvature operator. We classify the algebraic curvature tensors so R(-) has constant rank 2 and show these are geometrically realizable by hypersurfaces in flat spaces. We also classify the Ivanov-Petrova algebraic curvature tensors of rank 2; these are the algebraic curvature tensors of constant rank 2 such that the complex Jordan normal form of R(-) is constant.
There is considered a connection with skew symmetric torsion on a quasi-Kähler manifold with Norden metric. Some necessary and sufficient conditions are derived for the corresponding curvature tensor to be Kählerian. In the case when this tensor is Kählerian, some relations are obtained between its scalar curvature and the scalar curvature of other curvature tensors. Conditions are given for the considered manifolds to be isotropic-Kähler.
A Riemannian manifold is called IP, if the eigenvalues of its skew-symmetric curvature operator are pointwise constant. It was previously shown that for all n\ge 4, except n=7, any IP manifold either has constant curvature, or is a warped product, with some specific function, of a line and a space of constant curvature. We extend this result to the case n = 7, and also study 3-dimensional IP manifolds.
The skew mean curvature flow (SMCF) is a natural generalization of the famous vortex filament equation. In this note, we show that the Gauss map of the SMCF satisfies a Schrödinger flow equation. In this regard, we explore the geometry of the oriented Grassmannian manifold explicitly by embedding it into the exterior product space.
We consider a 4-dimensional Riemannian manifold M endowed with a right skew-circulant tensor structure S, which is an isometry with respect to the metric g and the fourth power of S is minus identity. We determine a class of manifolds (M, g, S), whose curvature tensors are invariant under S. For such manifolds we obtain properties of the Ricci tensor. Also we get expressions of the sectional curvatures of some special 2-planes in a tangent space of (M, g, S).
We show that any smooth solution to the mean curvature flow equations coming out of a rotationally symmetric double cone is also rotationally symmetric.
A natural connection with totally skew-symmetric torsion on almost contact manifolds with B-metric is constructed. The class of these manifolds, where the considered connection exists, is determined. Some curvature properties for this connection, when the corresponding curvature tensor has the properties of the curvature tensor for the Levi-Civita connection and the torsion tensor is parallel, are obtained.
In this work, we study a class of rotational surfaces in the pseudo-Euclidean space $\mathbb{E}_2^4$ whose profile curves lie in two-dimensional planes. We solve the differential equation that characterizes the rotational surfaces with zero mean curvature to determine the profile curves of such rotational surfaces. Then, we give some explicit parametrization of maximal rotational surfaces and the timelike surfaces with zero mean curvature in $\mathbb{E}_2^4$.
We study rotational hypersurfaces with constant Gauss-Kronecker curvature. We solve the ODE for the generating curves of such hypersurfaces and analyze several geometric properties of such hypersurfaces. In particular, we discover a class of non-compact rotational hypersurfaces with constant and negative Gauss-Kronecker curvature and finite volume, which can be seen as the higher-dimensional generalization of the pseudo-sphere. Finally we investigate other types of rotational hypersurfaces with similar curvature constraints, including those with prescribed Gauss-Kronecker curvature.
We show that any complete, immersed self-expander to the inverse mean curvature flow, which has one end asymptotic to a cylinder, or has two ends asymptotic to two coaxial cylinders, must be rotationally symmetric.
We study rotational surfaces in Euclidean 3-space whose Gauss curvature is given as a prescribed function of its Gauss map. By means of a phase plane analysis and under mild assumptions on the prescribed function, we generalize the classification of rotational surfaces of constant Gauss curvature; exhibit examples that cannot exist in the constant Gauss curvature case; and analyze the asymptotic behavior of strictly convex graphs. We also prove the existence of singular radial solutions intersecting orthogonally the axis of rotation.
A necessary condition for a connection in a vector bundle to be locally metric is for its curvature matrix, which consists of $2$ forms, to be skew symmetric with respect to some local frame. In this paper we give a simple algorithm that can be used to decide when a matrix of $2$ forms is equivalent to a skew symmetric matrix. We apply this algorithm to verify whether a "{\it full rank}" curvature connection is locally metric.
We flow a hypersurface in Euclidean space by mean curvature flow with a Neumann boundary condition, where the boundary manifold is any torus of revolution. If we impose the conditions that the initial manifold is compatible and does not contain the rotational vector field in its tangent space, then mean curvature flow exists for all time and converges to a flat cross-section as $t \rightarrow \infty$.
In this work we classify the stable regions (second order minima of perimeter under an area constraint) in tori of revolution with piecewise continuous decreasing Gauss curvature from the longest parallel and with a horizontal symmetry. Some applications to isoperimetric problems are also given.
In this paper, we generalize a previous result to higher dimension. We prove that uniformly 3-convex translating solitons of mean curvature flow in $\mathbb{R}^{n+1}$ which arise as blow up limit of embedded, mean convex mean curvature flow must have $SO(n-1)$ symmetry.
In this work, we investigate the problem of finding surfaces in the Lorentz-Minkowski 3-space with prescribed skew ($S$) and mean ($H$) curvatures, which are defined through the discriminant of the characteristic polynomial of the shape operator and its trace, respectively. After showing that $H$ and $S$ can be interpreted in terms of the expected value and standard deviation of the normal curvature seen as a random variable, we address the problem of prescribed curvatures for surfaces of revolution. For surfaces with a non-lightlike axis and prescribed $H$, the strategy consists in rewriting …
We give a full classification of complete rotationally invariant surfaces with constant Gauss curvature in Berger spheres: they are either Clifford tori, which are flat, or spheres of Gauss curvature $K \geq K_0$ for a positive constant $K_0$, which we determine explicitly and depends on the geometry of the ambient Berger sphere. For values of $K_0 \leq K \leq K_P$, for a specific constant $K_P$, it was not known until now whether complete constant Gauss curvature $K$ surfaces existed in Berger spheres, so our classification provides the first examples. For $K > K_P$, we prove that the rotatio…
We give the classification of constant mean curvature rotational surfaces of elliptic, hyperbolic, and parabolic type in the four-dimensional pseudo-Euclidean space with neutral metric.
If a piece of the contour of a picture is missing to the eye vision, then the brain tends to complete it using some kind of sub-Riemannian geodesics of the unit tangent bundle of the plane, R2xS1. These geodesics can be obtained by lifting extremal curves of a total curvature type energy in the plane. We completely solve this variational problem, geometrically. Moreover, we also show a way of constructing rotational surfaces of constant negative curvature in R3 by evolving these extremal curves under their associated binormal flow with prescribed velocity. Finally, we prove that, locally, all …
We prove that any piece of a rotational hypersurface with prescribed mean curvature function in a Euclidean space can be uniquely extended infinitely, which generalizes the results by Euler and Delaunay for surfaces of revolution with constant mean curvautre. Next, we prove the same kind of theorem for generalized rotational hypersurfaces of O(l+1) x O(m+1)-type. The key lemmas in this paper show the existence of solutions for singular initial value problems which arise from the analysis of ordinary differential equations of generating curves of those hypersurfaces.
The skew mean curvature flow(SMCF), which origins from the study of fluid dynamics, describes the evolution of a codimension two submanifold along its binormal direction. We study the basic properties of the SMCF and prove the existence of a short-time solution to the initial value problem of the SMCF of compact surfaces in Euclidean space $\mathbb{R}^4$. A Sobolev-type embedding theorem for the second fundamental forms of two dimensional surfaces is also proved, which might be of independent interest.
For each $n\geq 2$ we construct a new closed embedded mean curvature self-shrinking hypersurface in $\mathbb{R}^{2n}$. These self-shrinkers are diffeomorphic to $S^{n-1}\times S^{n-1}\times S^1$ and are $SO(n)\times SO(n)$ invariant. The method is inspired by constructions of Hsiang and these surfaces generalize self-shrinking "tori" diffeomorphic to $S^{n-1}\times S^1$ constructed by Angenent.
We classify all rotational surfaces in Euclidean space whose principal curvatures $κ_1$ and $κ_2$ satisfy the linear relation $κ_1=aκ_2+b$, where $a$ and $b$ are two constants. We give a variational characterization of these surfaces in terms of its generating curve. As a consequence of our classification, we find closed (embedded and not embedded) surfaces and periodic (embedded and not embedded) surfaces with a geometric behaviour similar to Delaunay surfaces.
We classify constant mean curvature surfaces invariant by a 1-parameter group of isometries in the Berger spheres and in the special linear group Sl(2, R). In particular, all constant mean curvature spheres in those spaces are described explicitly, proving that they are not always embedded. Besides new examples of Delaunay-type surfaces are obtained. Finally the relation between the area and volume of these spheres in the Berger spheres is studied, showing that, in some cases, they are not solution to the isoperimetric problem.
We show that any integral Brakke flow coming out of a rotationally symmetric double cone with entropy at most two must stay rotationally symmetric for all time, provided the flow is smooth for a short time. We also show the existence of a non-self-similar flow coming out of a double cone with entropy at most two, and give an example of such a flow with a finite time singularity.
In this paper, we study the rotational surfaces in the isotropic 3-space I^3. satisfying Weingarten conditions in terms of the relative curvature K (analogue of the Gaussian curvature) and the isotropic mean curvature H. In particular, we classify such surfaces of linear Weingarten type in I^3.
A pseudo-Riemannian manifold is said to be spacelike Jordan IP if the Jordan normal form of the skew-symmetric curvature operator depends upon the point of the manifold, but not upon the particular spacelike 2-plane in the tangent bundle at that point. We use methods of algebraic topology to classify connected spacelike Jordan IP pseudo-Riemannian manifolds of signature $(p,q)$, where $q\ge 11$, $p\le \frac{q-6}{4}$ and where the set $\{q, . . ., q+p\}$ does not contain a power of 2.
In this paper, we study curve shortening flows on rotational surfaces in $\mathbb{R}^3$. We assume that the surfaces have negative Gauss curvatures and that some condition related to the Gauss curvature and the curvature of embedded curve holds on them. Under these assumptions, we prove that the curve remains a graph over the parallels of the rotational surface along the flow. Also, we prove the comparison principle and the long-time existence of the flow.
A skew loop is a closed curve without parallel tangent lines. We prove: The only complete surfaces in euclidean 3-space with a point of positive curvature and no skew loops are the quadrics. In particular, ellipsoids are the only closed surfaces without skew loops. We also prove results about skew loops on cylinders and positively curved surfaces.
Weingarten surfaces are those whose principal curvatures satisfy a functional relation, whose set of solutions is called the curvature diagram or the W-diagram of the surface. Making use of the notion of geometric linear momentum of a plane curve, we propose a new approach to the study of rotational Weingarten surfaces in Euclidean 3-space. Our contribution consists of reducing any type of Weingarten condition on a rotational surface to a first order differential equation on the momentum of the generatrix curve. In this line, we provide two new classification results involving a cubic and an h…
Let (M,g) be a steady gradient Ricci soliton of dimension n \geq 4 which has positive sectional curvature and is asymptotically cylindrical. Under these assumptions, we show that (M,g) is rotationally symmetric. In particular, our result applies to steady gradient Ricci solitons in dimension 4 which are κ-noncollapsed and have positive isotropic curvature.
We introduce fourth fundamental form $IV,$ and $i$-th curvature formulas of hypersurfaces in the four dimensional Euclidean geometry ${\mathbb{E}}^{4}$. Defining fourth fundamental form and $i$-th curvatures for hypersurfaces, we calculate them on rotational hypersurface. In addition we study rotational hypersurface satisfying $Δ^{IV}\mathbf{x=Ax}$ for some $4\times 4$ matrix $\mathbf{A.}$
We construct a special class of Lorentz surfaces in the pseudo-Euclidean 4-space with neutral metric which are one-parameter systems of meridians of rotational hypersurfaces with lightlike axis and call them meridian surfaces. We give the complete classification of the meridian surfaces with constant Gauss curvature and prove that there are no meridian surfaces with parallel mean curvature vector field other than CMC surfaces lying in a hyperplane. We also classify the meridian surfaces with parallel normalized mean curvature vector field. We show that in the family of the meridian surfaces th…
In this article, we examine complete, mean-convex self-expanders for the mean curvature flow whose ends have decaying principal curvatures. We prove a Liouville-type theorem associated to this class of self-expanders. As an application, we show that mean-convex self-expanders which are asymptotic to $O(n)$-invariant cones are rotationally symmetric.
A spacelike surface in Minkowski space $\mathbb{R}_1^3$ is called a $K^α$-translator of the flow by the powers of Gauss curvature if satisfies $K^α= \langle N,\vec{v}\rangle$, $α\neq 0$, where $K$ is the Gauss curvature, $N$ is the unit normal vector field and $\vec{v}$ is a direction of $\mathbb{R}_1^3$. In this paper, we classify all rotational $K^α$-translators. This classification will depend on the causal character of the rotation axis. Although the theory of the $K^α$-flow holds for spacelike surfaces, the equation describing $K^α$-translators is still valid for timelike surfaces. So we …
In this paper we finish the classification of rotational special Weingarten surfaces in S^2 x R and H^2 x R; i.e. rotational surfaces in S^2 x R and H^2 x R whose mean curvature h and extrinsic curvature K_e satisfy h=f(h^2-K_e), for some function f in C^1([0,+infty)) such that 4x(f'(x))^2<1 for any x>=0.
In this paper we study rotational surfaces in the space $\mathbb{H}^2\times\mathbb{R}$ whose mean curvature is given as a prescribed function of their angle function. These surfaces generalize, among others, the ones of constant mean curvature and the translating solitons of the mean curvature flow. Using a phase plane analysis we construct entire rotational graphs, catenoid-type surfaces, and exhibit a classification result when the prescribed function is linear.
In the previous paper, it has been proved that the generalized rotational hypersurfaces of O(n-1)-type and O (l+1) x O(m+1)-type, for which the mean curvature is any prescribed continuous function. This paper is a sequel, and a similar existence result is shown for any type.
In an ambient space with rotational symmetry around an axis (which include the Hyperbolic and Euclidean spaces), we study the evolution under the volume-preserving mean curvature flow of a revolution hypersurface M generated by a graph over the axis of revolution and with boundary in two totally geodesic hypersurfaces (tgh for short). Requiring that, for each time t, the evolving hypersurface M_t meets such tgh ortogonally, we prove that: a) the flow exists while M_t does not touch the axis of rotation; b) throughout the time interval of existence, b1) the generating curve of M_t remains a gra…
We consider the unique Hermitian connection with totally skew-symmetric torsion on a Hermitian manifold. We prove that if the torsion is parallel and the holonomy is Sp(n)U(1), considered as a subgroup of U(2n) x U(1), then the manifold is locally isomorphic to the twistor space of a quaternionic Kaehler manifold with positive scalar curvature. If the manifold is complete, then it is globally isomorphic to such a twistor space.
A surface in a Riemannian space is called of constant astigmatism if the difference between the principal radii of curvatures at each point is a constant function. In this paper we give a classification of all rotational surfaces of constant astigmatism in space forms. We also prove that the generating curves of such surfaces are critical points of a variational problem for a curvature energy. Using the description of these curves, we locally construct all rotational surfaces of constant astigmatism as the associated binormal evolution surfaces from the generating curves.
In this article, we study spacelike and timelike rotational surfaces in a 3--dimensional de Sitter space $\mathbb{S}^3_1$ which are the orbit of a regular curve under the action of the orthogonal transformation of 4--dimensional Minkowski space $\mathbb{E}^4_1$ leaving a spacelike, a timelike or a degenerate plane pointwise fixed. We determine the profile curve of such Weingarten rotational surfaces parameterized by the principal curvature. Then, we classify spacelike and timelike Weingarten rotational surface in $\mathbb{S}^3_1$ with the principal curvatures $κ$ and $λ$ satisfying $κ=aλ+b$ or…
We obtain a classification result for rotational surfaces in the Heisenberg space and the universal cover of the special linear group, whose mean curvature is given as a prescribed $C^1$ function depending on their angle function. We show that these surfaces behave like the Delaunay surfaces of constant mean curvature, under some assumptions on the prescribed function. In contrast with the constant mean curvature case, we exhibit the existence of rotational, embedded tori, providing counterexamples of the Alexandrov problem for this class of immersed surfaces.
We use a phase space analysis to give some classification results for rotational hypersurfaces in $\mathbb{R}^{n+1}$ whose mean curvature is given as a prescribed function of its Gauss map. For the case where the prescribed function is an even function in $\mathbb{S}^n$, we show that a Delaunay-type classification holds for this class of hypersurfaces. We also exhibit examples showing that the behavior of rotational hypersurfaces of prescribed (non-constant) mean curvature is much richer than in the constant mean curvature case.
We study surfaces of constant mean curvature which are invariant by oneparameter group of either rotational isometries or parabolic isometries, immersed into the homogeneous manifold PSL2(R,tau). Also, we give some applications.
We study rotational surfaces with constant Minkowski Gaussian curvature and rotational surfaces with constant Minkowski mean curvature in a $3$-dimensional normed space with rotationally symmetric norm. We have a generalization of the catenoid, pseudo-sphere and Delaunay surfaces.
We study a class of Riemannian manifolds with respect to the covariant derivative of their curvature tensors. We introduce geometrically the class of directed Riemannian manifolds of pointwise constant relative sectional curvature and give a tensor characterization for such manifolds. We prove that all rotational hypersurfaces are directed and find the rotational hypersurfaces of pointwise constant relative sectional curvature. For the class of directed Riemannian manifolds of pointwise constant relative sectional curvature having a totally umbilical scalar distribution we prove a structural t…
