The full realization of spin qubits for quantum technologies relies on the ability to control and design the formation processes of spin defects in semiconductors and insulators. We present a computational protocol to investigate the synthesis of point-defects at the atomistic level, and we apply it to the study of a promising spin-qubit in silicon carbide, the divacancy (VV). Our strategy combines electronic structure calculations based on density functional theory and enhanced sampling techniques coupled with first principles molecular dynamics. We predict the optimal annealing temperatures for the formation of VVs at high temperature and show how to engineer the Fermi level of the material to optimize the defect's yield for several polytypes of silicon carbide. Our results are in excellent agreement with available experimental data and provide novel atomistic insights into point defect formation and annihilation processes as a function of temperature.
Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are considered a key materials class to scale microelectronics to the ultimate atomic level. The robust quantum properties in TMDs also enable new device concepts that promise to push quantum technologies beyond cryogenic environments. Mission-critical capabilities towards realizing these goals are the mitigation of accidental lattice imperfections and the deterministic generation of desirable defects. In this perspective, the authors review some of their recent results on engineering and probing atomic point defects i…
We present a new way of nano-engineering graphene using defect domains. These regions have ring structures that depart from the usual honeycomb lattice, though each carbon atom still has three nearest neighbors. A set of stable domain structures is identified using density functional theory (DFT), including blisters, ridges, ribbons, and metacrystals. All such structures are made solely out of carbon; the smallest encompasses just 16 atoms. Blisters, ridges and metacrystals rise up out of the sheet, while ribbons remain flat. In the vicinity of vacancies, the reaction barriers to formation are…
Charged defects in 2D materials have emerging applications in quantum technologies such as quantum emitters and quantum computation. Advancement of these technologies requires rational design of ideal defect centers, demanding reliable computation methods for quantitatively accurate prediction of defect properties. We present an accurate, parameter-free and efficient procedure to evaluate quasiparticle defect states and thermodynamic charge transition levels of defects in 2D materials. Importantly, we solve critical issues that stem from the strongly anisotropic screening in 2D materials, that…
We report on a strong photoluminescence (PL) enhancement of monolayer MoS2 through defect engineering and oxygen bonding. Micro- PL and Raman images clearly reveal that the PL enhancement occurs at cracks/defects formed during high temperature vacuum annealing. The PL enhancement at crack/defect sites could be as high as thousands of times after considering the laser spot size. The main reasons of such huge PL enhancement include: (1) the oxygen chemical adsorption induced heavy p doping and the conversion from trion to exciton; (2) the suppression of non-radiative recombination of excitons at…
Transport measurements have revealed several exotic electronic properties of graphene. The possibility to influence the electronic structure and hence control the conductivity by adsorption or doping with adatoms is crucial in view of electronics applications. Here, we show that in contrast to expectation, the conductivity of graphene increases with increasing concentration of vacancy defects, by more than one order of magnitude. We obtain a pronounced enhancement of the conductivity after insertion of defects by both quantum mechanical transport calculations as well as experimental studies of…
Engineering oxygen octahedra rotation patterns in $ABO_3$ perovskites is a powerful route to design functional materials. Here we propose a strategy that exploits point defects that create local electric dipoles and couple to the oxygen sublattice, enabling direct actuation on the rotational degrees of freedom. This approach, which relies on substituting an $A$ site with a smaller ion, paves a way to couple dynamically octahedra rotations to external electric fields. A common antisite defect, $\mathrm{Al_{La}}$ in rhombohedral LaAlO$_3$ is taken as a prototype to validate the idea, with atomis…
We investigate graphene superlattices of nitrogen and boron substitutional defects and by using symmetry arguments and electronic structure calculations we show how such superlattices can be used to modify graphene band structure. Specifically, depending on the superlattice symmetry, the structures considered here can either preserve the Dirac cones (D_{6h} superlattices) or open a band gap (D_{3h}). Relevant band parameters (carriers effective masses, group velocities and gaps, when present) are found to depend on the superlattice constant n as 1/n^{p} where p is in the range 1-2, depending o…
The combination of two-dimensional (2D) materials into heterostructures enabled the formation of atomically thin devices with designed properties. To achieve a high density, bottom-up integration, the growth of these 2D heterostructures via van der Waals epitaxy (vdWE) is an attractive alternative to the currently mostly employed mechanical transfer, which is still problematic in terms of scaling and reproducibility. However, controlling the location of the nuclei formation remains a key challenge in vdWE. Here, we use a focused He ion beam for a deterministic placement of defects in graphene …
MnBi2Te4 and MnBi4Te7 are intrinsic antiferromagnetic topological insulators, offering a promising materials platform for realizing exotic topological quantum states. However, high densities of intrinsic defects in these materials not only cause bulk metallic conductivity, preventing the measurement of quantum transport in surface states, but may also affect magnetism and topological properties. In this paper, we show by density functional theory calculations that the strain induced by the internal heterostructure promotes the formation of large-size-mismatched antisite defect BiMn in MnBi2Te4…
The efforts in the optimization of the physical and chemical properties related to the photocatalytic efficiency of TiO2 nanoparticles relies mainly on defect engineering strategies, been the structural and the doping the most common ones. The doping of the anatase TiO2 structure with lanthanides elements potentially can turns the TiO2 optical absorption into the visible range increasing drastically its photocatalytic efficiency. Here we show that the processing of TiO2 nanoparticles in oxygen atmosphere and the La doping stabilizes the anatase phase. The La incorporation takes place mainly in…
The topological Hall effect (THE) has been discovered in ultrathin SrRuO3 (SRO) films, where the interface between the SRO layer and another oxide layer breaks the inversion symmetry resulting in the appearance of THE. Thus, THE only occurs in ultra-thin SRO films of several unit cells. In addition to employing a heterostructure, the inversion symmetry can be broken intrinsically in bulk SRO by introducing defects. In this study THE is observed in 60 nm thick SRO films, in which defects and lattice distortions are introduced by helium ion irradiation. The irradiated SRO films exhibit a pronoun…
Atomistic defect engineering through the pulsed laser epitaxy of perovskite transition metal oxides offers facile control of their emergent opto-electromagnetic and energy properties. Among the various perovskite oxides, EuTiO3 exhibits a strong coupling between the lattice, electronic, and magnetic degrees of freedom. This coupling is highly susceptible to atomistic defects. In this study, we investigated the magnetic phase of EuTiO$_3$ epitaxial thin films via systematic defect engineering. A magnetic phase transition from an antiferromagnet to a ferromagnet was observed when the unit cell v…
Among the class of strongly-correlated oxides, La1-xSrxMnO3 $-$ a half metallic ferromagnet with a Curie temperature above room temperature $-$ has sparked a huge interest as a functional building block for memory storage and spintronic applications. In this respect, defect engineering has been in the focus of a long-standing quest for fabricating LSMO thin films with highest quality in terms of both structural and magnetic properties. Here, we discuss the correlation between structural defects, such as oxygen vacancies and impurity islands, and magnetism in La0.74Sr0.26MnO3/SrTiO3 (LSMO/STO) …
The engineering of defects in diamond, particularly nitrogen-vacancy (NV) centers, is important for many applications in quantum science. A materials science approach based on chemical vapor deposition (CVD) growth of diamond and in-situ nitrogen doping is a promising path toward tuning and optimizing the desired properties of the embedded defects. Herein, with the coherence of the embedded defects in mind, we explore the effects of substrate miscut on the diamond growth rate, nitrogen density, and hillock defect density, and we report an optimal angle range between 0.66° < θ < 1.16° for the p…
We report on the possibility for a spin valve effect driven by edge defect engineering of zigzag graphene nanoribbons. Based on a mean-field spin unrestricted Hubbard model, electronic band structures and conductance profiles are derived, using a self-consistent scheme to include gate-induced charge density. The use of an external gate is found to trigger a semiconductor-metal transition in clean zigzag graphene nanoribbons, whereas it yields a closure of the spin-split bandgap in the presence of Klein edge defects. These features could be exploited to make novel charge and spin based switches…
In this report we present a systematic study on the preparation of Co:ZnO ceramics via standard solid-state route from different Co precursors (Co3O4, CoO and metallic Co) and atmospheres (O2 and Ar). Particular emphasis was done on the defect chemistry engineering and on the sintering growth kinetics. First-principles calculations based on density functional theory were employed to determine the formation energy of the main point defects in ZnO and Co:ZnO systems. Based on the theoretical results a set of chemical reactions was proposed. A detailed microstructural characterization was perform…
Two-dimensional (2D) molybdenum disulfide (MoS2) holds great promise in electronic and optoelectronic applications owing to its unique structure and intriguing properties. The intrinsic defects such as sulfur vacancies (SVs) of MoS2 nanosheets are found to be detrimental to the device efficiency. To mitigate this problem, functionalization of 2D MoS2 using thiols has emerged as one of the key strategies for engineering defects. Herein, we demonstrate an approach to controllably engineer the SVs of chemically exfoliated MoS2 nanosheets using a series of substituted thiophenols in solution. The …
Three-dimensional topological semimetals host a range of interesting quantum phenomena related to band crossing that give rise to Dirac or Weyl fermions, and can be potentially engineered into novel quantum devices. Harvesting the full potential of these materials will depend on our ability to position the Fermi level near the symmetry-protected band crossings so that their exotic spin and charge transport properties become prominent in the devices. Recent experiments on bulk and thin films of topological half-Heuslers show that the Fermi level is far from the symmetry-protected crossings, lea…
We present results of an extensive set of first-principles density functional theory calculations of point defect formation, binding and clustering energies in austenitic Fe with dilute concentrations of Cr and Ni solutes.
We report first-principles density-functional theory studies of native point defects and defect complexes in olivine-type LiFePO4, a promising candidate for rechargeable Li-ion battery electrodes. The defects are characterized by their formation energies which are calculated within the GGA+U framework. We find that native point defects are charged, and each defect is stable in one charge state only. Removing electrons from the stable defects always generates defect complexes containing small hole polarons. Defect formation energies, hence concentrations, and defect energy landscapes are all se…
Understanding of charge transport mechanisms in nanoscale structures is essential for the development of molecular electronic devices. Charge transport through 1D molecular systems connected between two contacts is influenced by several parameters such as the electronic structure of the molecule and the presence of disorder and defects. In this work, we have modeled 1D molecular wires connected between electrodes and systematically investigated the influence of both soliton formation and the presence of defects on properties such as the conductance and the density of states. Our numerical calc…
We report first-principles calculations that reveal the atomic forms, stability, and energy levels of carbon-related defects in SiC (0001)/SiO$_{\rm 2}$ systems. We clarify the stable position (SiC side, SiO$_{\rm 2}$ side, or just at the SiC/SiO$_{\rm 2}$ interface) of defects depending on the oxidation environment. Under an O-rich condition, the di-carbon antisite ((C$_{\rm 2}$)$_{\rm Si}$) in the SiC side is stable and critical for $n$-channel MOSFETs, whereas the di-carbon defect (Si-C-C-Si) at the interface becomes critical under an O-poor condition. Our results suggest that the oxidation…
Wake-up effect is still an obstacle in the commercialization of hafnia-based ferroelectric thin films. In this work, we investigate the effect of defects, controlled by ozone dosage, on the field cycling behavior of the atomic layer deposited Hf0.5Zr0.5O2 (HZO) films. A nearly wake-up free device was achieved after reduction of carbon contamination and oxygen defects by increasing the ozone dosage. The sample which was grown at 30 sec ozone pulse duration shows about 98% of the woken-up Pr at the pristine state while those grown below 5 sec ozone pulse time show a pinched hysteresis loop, unde…
Understanding and predicting the thermodynamic properties of point defects in semiconductors and insulators would greatly aid in the design of novel materials and allow tuning the properties of existing ones. As a matter of fact, first-principles calculations based on density functional theory (DFT) and the supercell approach have become a standard tool for the study of point defects in solids. However, in the dilute limit, of most interest for the design of novel semiconductor materials, the raw DFT calculations require an extensive post-processing. Spinney is an open-source Python package de…
We have studied intrinsic defect complexes in In$_2$O$_3$ using ab initio random structure searching (AIRSS). Our first-principles density-functional-theory calculations predict the thermodynamic stability of several novel defect structures. We combine the static lattice energy and harmonic vibrational energy with the often-neglected configurational entropy to construct the free energy, which is minimised to predict defect abundances at finite temperatures. We predict that some of our new defect structures - in particular our {In,2V$_\mathrm{O}$} and {2In,3V$_\mathrm{O}$} defects - can exist i…
First-principles calculations have been performed to study the formation of defect complexes in Ti doped alpha-Al2O3 crystals. The formation energies of isolated Ti3+ and Ti4+ defects, pairs, triples and quadruples of Ti ions and Al vacancies are computed under different equilibrium conditions of Al-Ti-O related phases. Taking into account charge neutrality of the whole system we determine the equilibrium concentrations of simple and complex defects as well as the total equilibrium concentration of Ti in an alpha-Al2O3 crystal. It is shown that the equilibrium concentration of complex defects …
Zinc tin nitride (ZnSnN2) is attracting growing interest as a non-toxic and earth-abundant photoabsorber for thin-film photovoltaics. Carrier transport in ZnSnN2 and consequently cell performance are strongly affected by point defects with deep levels acting as carrier recombination centers. In this study, the point defects in ZnSnN2 are revisited by careful first-principles modeling based on recent experimental and theoretical findings. It is shown that ZnSnN2 does not have low-energy defects with deep levels, in contrast to previously reported results. Therefore, ZnSnN2 is more promising as …
Since the notion of topological insulator (TI) was envisioned in late 2000s, topology has become a new paradigm in condensed matter physics. Realization of topology as a generic property of materials has led to numerous predictions of topological effects. Although most of the classical topological effects, directly resulting from the presence of the spin-momentum-locked topological surface states (TSS), were experimentally confirmed soon after the theoretical prediction of TIs, many topological quantum effects remained elusive for a long while. It turns out that native defects, particularly in…
By using first-principles calculations, we investigated the monolayer $ReS_2$ with vacancies under strain engineering, specifically focusing on its energy of formation, band gap, electron density of states, effective mass and optical properties. The calculated results disclose that S4 defect is more likely to form than other kinds of vacancies. Asymmetric deformation induced by strain makes its band structure transformation from direct band gap to indirect band gap. The analysis of the partial density of states indicates that the Re-d, Re-p and S-d orbitals are the major components of the defe…
Calcium fluoride has been widely used for light up-/down-conversion luminescence by accommodating lanthanide ions as sensitizers or activators. Especially, Yb-doped \ce{CaF2} exhibits unique defect physics, causing various effects on the luminescence. This makes it vital for high efficiency of devices to control the defect-clustering, but theoretically principal guidelines for this are rarely provided. Here we perform the first-principles study on defect physics in Yb-doped \ce{CaF2} to reveal the thermodynamic transition levels and formation energies of possible defects. We suggest that the f…
Erbium (Er) doped GaN has been studied extensively for optoelectronic applications, yet its defect physics is still not well understood. In this work, we report a first-principles hybrid density functional study of the structure, energetics, and thermodynamic transition levels of Er-related defect complexes in GaN. We discover for the first time that Er$_{\rm Ga}$-C$_{\rm N}$-$V_{\rm N}$, a defect complex of Er, a C impurity, and an N vacancy, and Er$_{\rm Ga}$-O$_{\rm N}$-$V_{\rm N}$, a complex of Er, an O impurity, and an N vacancy, form defect levels at 0.18 and 0.46 eV below the conduction…
We study by means of first-principles pseudopotential method the coordination defects in a-Si and a-Si:H, also in their formation and their evolution upon hydrogen interaction. An accurate analysis of the valence charge distribution and of the ``electron localization function'' (ELF) allows to resolve possible ambiguities in the bonding configuration, and in particular to identify clearly three-fold (T_3) and five-fold (T_5) coordinated defects. We found that electronic states in the gap can be associated to both kind of defects, and that in both cases the interaction with hydrogen can reduce …
The electronic transport through Au-(Cu$_{2}$O)$_n$-Au junctions is investigated using first-principles calculations and the nonequilibrium Green's function method. The effect of varying the thickness (i.e., $n$) is studied as well as that of point defects and anion substitution. For all Cu$_{2}$O thicknesses the conductance is more enhanced by bulk-like (in contrast to near-interface) defects, with the exception of O vacancies and Cl substitutional defects. A similar transmission behavior results from Cu deficiency and N substitution, as well as from Cl substitution and N interstitials for th…
Study and design of magneto-optically active single point defects in semiconductors are rapidly growing fields due to their potential in quantum bit and single photon emitter applications. Detailed understanding of the properties of candidate defects is essential for these applications, and requires the identification of the defects microscopic configuration and electronic structure. Multi-component semiconductors often host two or more non-equivalent configurations of point defects. These configurations generally exhibit similar electronic structure and basic functionalities, however, they di…
The thermal conductance in graphene nanoribbon with a vacancy or silicon point defect (substitution of C by Si atom) is investigated by non-equilibrium Green's function (NEGF) formalism combined with first-principle calculations density-functional theory with local density approximation. An efficient correction to the force constant matrix is presented to solve the conflict between the long-range character of the {\it ab initio} approach and the first-nearest-neighboring character of the NEGF scheme. In nanoribbon with a vacancy defect, the thermal conductance is very sensitive to the position…
Deep level transient spectroscopy (DLTS) is used extensively to study defects in semiconductors. We demonstrate that great care should be exercised in interpreting activation energies extracted from DLTS as ionization energies. We show how first-principles calculations of thermodynamic transition levels, temperature effects of ionization energies, and nonradiative capture coefficients can be used to accurately determine actual activation energies that can be directly compared with DLTS. Our analysis is illustrated with hybrid functional calculations for two important defects in GaN that have s…
Defect induced trap states are essential in determining the performance of semiconductor photodetectors. The de-trap time of carriers from a deep trap could be prolonged by several orders of magnitude as compared to shallow trap, resulting in additional decay/response time of the device. Here, we demonstrate that the trap states in two-dimensional ReS2 could be efficiently modulated by defect engineering through molecule decoration. The deep traps that greatly prolong the response time could be mostly filled by Protoporphyrin (H2PP) molecules. At the same time, carrier recombination and shallo…
Geometric optimization and electronic properties of Stone-Wales defective antimonene nanotubes are calculated by the method of first -principle calculations based on density functional theory. Various nanotubes are investigated according to the possible orientations of zigzag/armchair nanostructures when Stone-Wales defects are formed. The band structures, partial density of states and atomic orbitals are calculated to reveal the mechanism of influence of Stone-Wales defects on antimonene nanotubes. When the structure of antimonene changes from monolayer to tube, the indirect gap semiconductor…
We present a theoretical study of broadening of defect luminescence bands due to vibronic coupling. Numerical proof is provided for the commonly used assumption that a multi-dimensional vibrational problem can be mapped onto an effective one-dimensional configuration coordinate diagram. Our approach is implemented based on density functional theory with a hybrid functional, resulting in luminescence lineshapes for important defects in GaN and ZnO that show unprecedented agreement with experiment. We find clear trends concerning effective parameters that characterize luminescence bands of donor…
Lattice defects affect the long-term stability of halide perovskite solar cells. Whereas simple point defects, i.e., atomic interstitials and vacancies, have been studied in great detail, here we focus on compound defects that are more likely to form under crystal growth conditions, such as compound vacancies or interstitials, and antisites. We identify the most prominent defects in the archetype inorganic perovskite CsPbI$_3$, through first-principles density functional theory (DFT) calculations. We find that under equilibrium conditions at room temperature, the antisite of Pb substituting Cs…
Modeling semicoherent metal-metal interfaces has so far been performed using atomistic simulations based on semiempirical interatomic potentials. We demonstrate through more precise ab-initio calculations that key conclusions drawn from previous studies do not conform with the new results which show that single point defects do not delocalize near the interfacial plane, but remain compact. We give a simple qualitative explanation for the difference in predicted results that can be traced back to shortcomings in potential fitting.
We theoretically investigate defect formation energies in LaO$X$S$_2$ ($X=$Sb, Bi) using first-principles calculation. We find that the oxygen vacancy is relatively stable, where its formation energy is higher in $X=$ Sb than in $X=$ Bi. An interesting feature of $X=$ Sb is that the vacancy of the in-plane sulfur atom becomes more stable than in $X=$ Bi, caused by the formation of an Sb$_2$ dimer and the electron occupation of the impurity energy levels. The formation energies of cation defects and anion-cation antisite defects are positive for the chemical equilibrium condition used in this s…
The structural and electronic properties of amorphous silicon ($a$-Si) are investigated by first-principles calculations based on the density-functional theory (DFT), focusing on the intrinsic structural defects. By simulated melting and quenching of a crystalline silicon model through the Car-Parrinello molecular dynamics (CPMD), we generate several different $a$-Si samples, in which three-fold ($T_3$), five-fold ($T_5$), and anomalous four-fold ($T_{4a}$) defects are contained. Using the samples, we clarify how the disordered structure of $a$-Si affects the characters of its density of state…
