Perovskite compounds have the potential to harvest solar energy as well as exploit the thermoelectric potential of a number of available materials. Here, we present the electronic, structural, thermoelectric, and optical properties of Cs2AgSbX6 (X = Cl, Br, I) perovskite with the help of the density functional theory (DFT). The WC-GGA approximation was used to calculate the structural parameters. All these compounds crystalize in a cubic unit cell with lattice constant increasing from 10.65 Å (Cl) to 11.14 Å (Br) to 11.86 Å (I). The mBJ-functional shows a semiconducting nature for these compounds with an indirect band gap lying at the L-X symmetry points. The optical conductivity and absorption coefficient show their peaks in the ultraviolet region, moving towards a lower energy range by inserting large size anion. The band gap of these compounds (2.08, 1.37, 0.64 eV) indicates their potential in single and multijunction solar cells. The value of refractive index at zero energy was evaluated to be 3.1, 2.2, and 1.97 for Cs2AgSbCl6, Cs2AgSbBr6 and Cs2AgSbI6. Effective mass of electrons is smaller than those of holes resulting in higher carrier mobility for electrons. The Seebeck coefficient, power factor, and the figure of merit were computed using the BoltzTrap code. The negative temperature coefficient of resistivity also supports the semiconductor nature of these compounds. The high electrical, small thermal conductivity, positive Seebeck coefficient, and the optimum figure of merit make these compounds suitable for thermoelectric applications.
Two-dimensional (2D) metal halides have received more attention because of their electronic and optoelectronic properties. Recently, researchers are interested to investigate the thermoelectric properties of metal halide monolayers because of their ultralow lattice conductivity, high Seebeck coefficient and figure of merit. Here, we have investigated thermoelectric and optoelectronic properties of XI$_2$ (X=Sn and Si) monolayers with the help of density functional theory and Boltzmann transport equation. The structural parameters have been optimized with relaxation of atomic positions. Excelle…
We predict the structural, electronic and optic properties of the inorganic Ge-based halide perovskites AGeX3 (A = Cs, Rb; X = I, Br, Cl) by using first-principles method. In particular, absolute electronic energy band levels are calculated using two different surface terminations of each compound, reproducing the experimental band alignment.
Methylammonium lead iodide perovskite has attracted intensive interest for its diverse optoelectronic applications. However, most studies to date have been limited to bulk thin films that are difficult to implement for integrated device arrays because of their incompatibility with typical lithography processes. We report the first patterned growth of regular arrays of perovskite microplate crystals for functional electronics and optoelectronics. We show that large arrays of lead iodide microplates can be grown from an aqueous solution through a seeded growth process and can be further intercal…
Lead (Pb) halide perovskites have achieved great success in recent years due to their excellent optoelectronic properties, which is largely attributed to the lone-pair s orbital-derived antibonding states at the valence band edge. Guided by the key band-edge orbital character, a series of ns2-containing (i.e., Sn2+, Sb3+, Bi3+) Pb-free perovskite alternatives have been explored as potential photovoltaic candidates. On the other hand, based on the band-edge orbital components (i.e., M2+ s and p/X- p orbitals), a series of strategies have been proposed to optimize their optoelectronic properties…
Chalcogenide perovskites have emerged as non-toxic and stable photovoltaic materials, acting as an alternative to lead halide hybrid perovskites having similar optoelectronic properties. In the present work, we report the electronic and optical properties of chalcogenide perovskites AZrS$_3$ (A=Ca, Sr, Ba) by using the density functional theory (DFT) and many-body perturbation theory (MBPT viz. G$_0$W$_0$ and BSE). This study includes excitonic analysis for the aforementioned systems. The exciton binding energy (E$_\textrm{B}$) is found to be larger than that of the halide perovskites, as the …
Inorganic metal-halide cubic perovskite semiconductors have become more popular in industrial applications of photovoltaic and optoelectronic devices. Among various perovskites, lead-free materials are currently most explored due to their non-toxic effect on the environment. In this study, the structural, electronic, optical, and mechanical properties of lead-free cubic perovskite materials FrBX3 (B = Ge, Sn; X = Cl, Br, I) are investigated through first-principles density-functional theory (DFT) calculations. These materials are found to exhibit semiconducting behavior with direct bandgap ene…
In scaling of transistor dimensions with low source-to-drain currents, 1D semiconductors with certain electronic properties are highly desired. We discover three new 1D materials, SbSeI, SbSI and SbSBr with high stability and novel electronic properties based on first principles calculations. Both dynamical and thermal stability of these 1D materials are examined. The bulk-to-1D transition results in dramatic changes in band gap, effective mass and static dielectric constant due to quantum confinement, making 1D SbSeI a highly promising channel material for transistors with gate length shorter…
Owing to the energy shortages and various severe adverse effects of traditional fossil fuel power generation mechanisms, photovoltaic and thermoelectric materials are considered as the potential candidates for building non-traditional, efficient, and eco-friendly power generation portfolios. Lead-based perovskites have emerged as highly efficient, abundantly available, and low-cost materials for such applications but there are two major challenges i.e. chemical instability and the danger of toxic lead leaching that can badly affect both the environment and human health. Therefore, in search of…
We have investigated the optoelectronic and thermoelectric properties of hexagonal antiperovskites Ba$_3$DN (D = Sb, Bi) using DFT calculations. The calculated equilibrium lattice parameters of both compounds are in good agreement with the available data. The calculated electronic structures indicate that they are direct bandgap semiconductors and the values of bandgaps are 1.35 and 1.33 eV for Ba3SbN and Ba3BiN, respectively. The inclusion of the spin-orbit effect split the conduction bands and the band gap of Ba$_3$BiN is much reduced. These two compounds have a high absorption coefficient, …
We have explored the mechanical, electronic, optical and thermoelectric properties of p-type half-Heusler compound BaAgP for the first time using density functional theory based calculations. The mechanical and dynamical stability of this compound is confirmed by studying the Born stability criteria and phonon dispersion curve, respectively. It is soft, ductile and elastically anisotropic. The atomic bonding along a-axis is stronger than that along c-axis. The calculated electronic structure reveals that the studied compound is an indirect band gap semiconductor. The analysis of charge density…
The electronic orbital characteristics at the band edges plays an important role in determining the electrical, optical and defect properties of perovskite photovoltaic materials. It is highly desirable to establish the relationship between the underlying atomic orbitals and the optoelectronic properties as a guide to maximize the photovoltaic performance. Here, using first-principles calculations and taking anion ordered Ruddlesden-Popper (RP) phase halide perovskites Cs$_{n+1}$Ge$_n$I$_{n+1}$Cl$_{2n}$ as an example, we demonstrate how to rationally optimize the optoelectronic properties (e.g…
We have prepared polycrystalline samples of (Sr$_{1-x}$La$_x$)$_2$ErRuO$_6$ and (Sr$_{1-x}$La$_x$)$_2$YRuO$_6$, and have measured the resistivity, Seebeck coefficient, thermal conductivity, susceptibility and x-ray absorption in order to evaluate the electronic states and thermoelectric properties of the doped double-perovskite ruthenates. We have observed a large Seebeck coefficient of -160 $μ$V/K and a low thermal conductivity of 7 mW/cmK for $x$=0.1 at 800 K in air. These two values are suitable for efficient oxide thermoelectrics, although the resistivity is still as high as 1 $Ω$cm. From …
In recent years, organic-inorganic hybrid perovskites have attracted wide attention due to their excellent optoelectronic properties in the application of optoelectronic devices. In the manufacturing process of perovskite solar cells, perovskite films inevitably have residual stress caused by non-stoichiometry components and the external load. However, their effects on the structural stability and photovoltaic performance of perovskite solar cells are still not clear. In this work, we investigated the effects of external strain on the structural stability and optoelectronic properties of tetra…
We predict high thermoelectric efficiency in the layered perovskite La$_2$Ti$_2$O$_7$, based on calculations (mostly ab-initio) of the electronic structure, transport coefficients, and thermal conductivity in a wide temperature range. The figure of merit $ZT$ computed with a temperature-dependent relaxation time increases monotonically from just above 1 at room temperature to over 2.5 at 1200 K, at an optimal carrier density of around 10$^{20}$ cm$^{-3}$. The Seebeck thermopower coefficient is between 200 and 300 $μ$V/K at optimal doping, but can reach nearly 1 mV/K at low doping. Much of the …
In spite of intensive studies on the chalcogenides as conventional thermoelectrics, it remains a challenge to find a proper material with high electrical but low thermal conductivities. In this work, we introduced a new class of thermoelectrics, Ge-based inorganic halide perovskites \ce{CsGeX3} (X = I, Br, Cl), which were already known as a promising candidate for photovoltaic applications. By performing the lattice-dynamics calculations and solving the Boltzmann transport equation, we revealed that these perovskites have ultralow thermal conductivities below 0.18 W m$^{-1}$ K$^{-1}$ while ver…
We report the structural, mechanical, electronic, optical, thermoelectric properties and spectroscopic limited maximum efficiency (SLME) of oxide double perovskite structure Ba2SbNbO6 and Ba2SbTaO6 compounds. All the investigations were performed through the first-principles density functional theory (DFT). The obtained values for the elastic constants reveal the mechanical stability of the studied compounds. The calculated data of bulk modulus (B), shear modulus (G), and Young's modulus (E) for Ba2SbTaO6 are found to be greater than those of Ba2SbNbO6. The ratio of Bulk to shear ratio (B/G) s…
Chalcogenide perovskites have received considerable interest in photovoltaic research community owing to their stability (thermal and aqueous), non-toxicity and lead free composition. However, to date a theoretical study mainly focusing on the excitonic and polaronic properties are not explored rigorously, due to its huge computational demand. Herein, we capture the excitonic and polaronic effects in a series of chalcogenide perovskites ABS$_3$ where A=Ba, Ca, Sr, and B=Hf, Sn by employing state-of-the art hybrid density functional theory and many body perturbative approaches viz. GW and BSE. …
The thermoelectric properties of halide perovskites $\mathrm{CsMI_3}$ (M=Sn and Pb) are investigated from a combination of first-principles calculations and semiclassical Boltzmann transport theory by considering both the electron and phonon transport. The electronic part is performed using a modified Becke and Johnson (mBJ) exchange potential, including spin-orbit coupling (SOC), while the phonon part is computed using generalized gradient approximation (GGA). It is found that SOC has remarkable detrimental effect on n-type power factor, while has a negligible influence in p-type doping, whic…
Owing to its superior visible light absorption and high chemical stability, chalcogenide perovskite barium zirconium sulfide has attracted significant attention in the past few years as a potential alternative to hybrid halide perovskites for optoelectronics. However, the high processing temperatures of BaZrS3 thin films at above 1000 C severely limits their potential for device applications. Herein, we report the synthesis of BaZrS3 thin films at temperatures as low as 500 C, by changing the chemical reaction pathway. The single phase BaZrS3 thin film was confirmed by X-ray diffraction and Ra…
Tailoring the Optoelectronic, Photocatalytic, Thermoelectric and Thermodynamic Properties of Halides Li2InBiX6 (X = Cl, Br, I) for Energy Conversion: A DFT Study
Princess Nourah Bint Abdulrahman University（公主诺拉·宾特·阿卜杜勒拉赫曼大学）；University of West Bohemia（西波希米亚大学）；University of Sargodha（萨尔戈达大学）；King Saud University（沙特国王大学）；Gachon University（迦南大学）
Surface states are ubiquitous to semiconductors and significantly impact the physical properties and consequently the performance of optoelectronic devices. Moreover, surface effects are strongly amplified in lower dimensional systems such as quantum wells and nanostructures. Layered halide perovskites (LHPs) are 2D solution-processed natural quantum wells, where optoelectronic properties can be tuned by varying the perovskite layer thickness. They are efficient semiconductors with technologically relevant stability. Here, a generic elastic model and electronic structure modelling are applied …
Interfacial effect on the optoelectronic and piezoelectric properties of Ge-Sn terminated Halide Perovskite heterostructure from first-principles study
Optoelectronic and Thermoelectric Properties of High-Performance AlSb Semiconductors
S.U. Umarov Physical-Technical Institute of NAST（S.U. 乌马罗夫物理技术研究所 (NAST)）；School of Optoelectronic Engineering & CQUPT-BUL Innovation Institute, Chongqing University of Posts and Telecommunications（重庆邮电大学光电工程学院及CQUPT-BUL创新学院）；Tajik National University（塔吉克斯坦国立大学）
We have investigated the systematic transport properties of the layered 112-type cobaltite LaBaCo2O5.5 by means of electrical resistivity, magnetoresistance, electroresistance and thermoelectric measurements in various conditions. In order to understand the complex conduction mechanism of LaBaCo2O5.5, the transport data have been analyzed using different theoretical models. The system shows semiconductor-semiconductor like transition (TSC) around 326K, corresponding to ferromagnetic transition and in the low temperature region resistivity data follows the Motts variable range hopping model. In…
Distorted polyhedral architecture enabled high thermoelectric performance of columnar double halide perovskites Cs2AgPdCl5 and Cs2AgPtCl5
Jamia Millia Islamia（贾米阿米利娅伊斯兰大学）；Govt Naveen College（政府纳文学院）；Indian Institute of Technology, Jodhpur（印度理工学院乔德普尔分校）；University of Ulsan（蔚山大学）；Mody University of Science and Technology（莫迪科学与技术大学）
Understanding the intrinsic charge transport in organolead halide perovskites is essential for the development of high-efficiency photovoltaics and other optoelectronic devices. Despite the rapid advancement of the organolead halide perovskite in photovoltaic and optoelectronic applications, the intrinsic charge carrier transport in these materials remains elusive partly due to the difficulty of fabricating electrical devices and obtaining good electrical contact. Here, we report the fabrication of organolead halide perovskite microplates with monolayer graphene as low barrier electrical conta…
Electronic and stability properties of quasi-2D alkylammonium perovskites are investigated using density functional theory (DFT) calculations and validated experimentally on selected classes of compounds. Our analysis is focused on perovskite structures of formula (A)$_2$(A$'$)$_{n-1}$Pb$_n$X$_{3n+1}$, with large cations A = butyl-, pentyl-, hexylammonium (BA, PA, HXA), small cations A$'$ = methylammonium, formamidinium, ethylammonium, guanidinium (MA,FA,EA,GA) and halogens X = I, Br, Cl. The role of the halogen ions is outlined for the band structure, stability and defect formation energies. …
Non-toxicity and stability make two-dimensional (2D) bismuth halide perovskites better alternatives to lead-based ones for optoelectronic applications and catalysis. In this work, we synthesize sub-micron size colloidal quasi-2D Cs3Bi2I9 perovskite nanosheets and study their generation and relaxation of charge carriers. Steady-state absorption spectroscopy reveals an indirect bandgap of 2.07 eV, which is supported by the density functional theory calculated band structure. The nanosheets do not show detectable photoluminescence at room temperature at band-edge excitation which is attributed to…
Halide perovskites are promising materials for light-emitting and light-harvesting applications. In this context, two-dimensional perovskites such as nanoplatelets or Ruddlesden-Popper and Dion-Jacobson layered structures are important because of their structural flexibility, electronic confinement, and better stability. This review article brings forth an extensive overview of the recent developments of two-dimensional halide perovskites both in the colloidal and non-colloidal forms. We outline the strategy to synthesize and control the shape and discuss different crystalline phases and optoe…
Recently, direct bandgap double perovskites are becoming more popular among photovoltaic research community owing to their potential to address issues of lead (Pb) toxicity and structural instability inherent in lead halide (simple) perovskites. In this study, In-Ag based direct bandgap double perovskite, Cs2AgInCl6 (CAIC), is treated with transition metal doping to improve the optoelectronic properties of the material. Investigations of structural and optoelectronic properties of Cu-doped CAIC, Cs2Ag(1-x)CuxInCl6, are done using ab-initio calculations with density functional theory (DFT) and …
Halide perovskites are promising semiconductors for inexpensive, high-performance optoelectronics. Despite a remarkable defect tolerance compared to conventional semiconductors, perovskite thin films still show substantial microscale heterogeneity in key properties such as luminescence efficiency and device performance. This behavior has been attributed to spatial fluctuations in the population of sub-bandgap electronic states that act as trap-mediated non-radiative recombination sites. However, the origin of the variations, trap states and extent of the defect tolerance remains a topic of deb…
Researchers have addressed the non-traditional power generation schemes as alternatives to the traditional fossil-fuel methods enormously since the scientific community has serious concerns about shortages of energy on our planet for future generations. In this scenario, the innovative materials for photovoltaic and thermoelectric device applications are required by addressing current issues of instability and efficiency. Perovskites are very popular in this regard particularly having higher power conversion efficiency of 25.2% in the case of solar cells. In the current article, we investigate…
Despite their puzzling vibrational characteristics that include strong signatures of anharmonicity and thermal disorder already around room temperature, halide perovskites exhibit favorable optoelectronic properties for applications in photovoltaics and beyond. Whether these vibrational properties are advantageous or detrimental to their optoelectronic properties remains, however, an important open question. Here, this issue is addressed by investigation of the {finite-temperature optoelectronic properties} in the prototypical cubic CsPbBr$_3$, using first-principles molecular dynamics based o…
Lead-free halide double perovskites with the formula of quaternary A$_2^+$B'B'$^{3+}$X$_6^-$ have recently attracted intense interest as alternatives to lead-halide-perovskite-based optoelectronic materials for their non-toxicity and enhanced chemical and thermodynamic stability. However, the understanding of intrinsic defect properties and their effects on carrier transport and Fermi level tuning is still limited. In this paper, we show that, by exploring the phase diagram of a halide double perovskite, one can control the effects of intrinsic defects on carrier trapping and Fermi level pinni…
In the present study, the structural, electronic, optical and thermoelectric properties of two isostructural chalcogenide materials, NaInS2 and NaInSe2 with hexagonal symmetry (R-3m) have been studied using the first principles method. A very good agreement has been found between our results with the available experimental and theoretical ones. The studied materials are semiconducting in nature as confirmed from the electronic band structure and optical properties.The strong hybridizations among s orbitals of Na, In and Se atoms push the bottom of the conduction band downward resulting in a na…
A Universal Polybromide Melt Strategy for the Direct Conversion of Metals into Optoelectronic-Grade Bromide Perovskites
Ben Gurion University of the Negev（本-古里安大学）；Ilse Katz Institute for Nanoscale Science and Technology, Ben-Gurion University of the Negev（本-古里安大学伊尔斯·卡茨纳米科学与技术研究所）
The hybrid halide perovskites, the very performant compounds in photovoltaic applications, possess large Seebeck coefficient and low thermal conductivity making them potentially interesting high figure of merit ($ZT$) materials. For this purpose one needs to tune the electrical conductivity of these semiconductors to higher values. We have studied the CH$_3$NH$_3$MI$_3$ (M=Pb,Sn) samples in pristine form showing very low $ZT$ values for both materials; however, photoinduced doping (in M=Pb) and chemical doping (in M=Sn) indicate that, by further doping optimization, $ZT$ can be enhanced toward…
Entirely inorganic perovskites have attracted enormous attention of late owing to their outstanding applications in optoelectronics including highly stable perovskite solar cells. In-depth understanding of the optoelectronic and transport properties of such materials are vital for practical implementation of the same. The carrier transport properties of the electronic devices based on perovskite materials significantly depend on the effective mass of the respective charge carriers. Here, we have performed first principle calculations with FP-LAPW method for the orthorhombic rubidium lead halid…
First-Principles Study of Novel Lead-Free Double Perovskite \b{eta}2SnGeX6 (\b{eta} = K, Rb; X = Cl, Br, I) for thermomechanical, optoelectronic and outstanding thermoelectric applications
Transition metal perovskite chalcogenides, a class of materials with rich tunability in functionalities, are gaining increased attention as candidate materials for renewable energy applications. Perovskite oxides are considered excellent n-type thermoelectric materials. Compared to oxide counterparts, we expect the chalcogenides to possess more favorable thermoelectric properties such as lower lattice thermal conductivity and smaller band gap, making them promising material candidates for high temperature thermoelectrics. Thus, it is necessary to study the thermal properties of these materials…
Tuning the optoelectronic properties of wide bandgap perovskites: Data-driven insights from combinatorial synthesis and high-throughput experimentation
Empa–Swiss Federal Laboratories for Materials Science and Technology（瑞士联邦材料科学与技术研究院）
Studying optoelectronic properties in FAPb$_{1-x}$Sn$_x$I$_3$ perovskites as a function of the lead:tin content, Parrott et al. observed the broadest luminescence linewidth and the largest luminescence Stokes shift in mixed compositions with Sn $ < 25$% and with $> 0.85$%. Since the largest effects of alloy disorder were expected for the 50:50 composition, it was concluded that the revealed disorder effects might arise from extrinsic factors that can be eliminated upon further crystal growth optimization. This comment shows that the largest effects of alloy disorder for perfectly random fluctu…
The observation of low energy edge photoluminescence and its beneficial effect on the solar cell efficiency of Ruddlesden-Popper perovskites has unleashed an intensive research effort to reveal its origin. This effort, however, has been met with more challenges as the underlying material structure has still not been identified; new modellings and observations also do not seem to converge. Using 2D (BA)2(MA)2Pb3Br10 as an example, we show that 3D MAPbBr3 is formed due to the loss of BA on the edge. This self-formed MAPbBr3 can explain the reported edge emission under various conditions, while t…
