We have investigated the systematic transport properties of the layered 112-type cobaltite LaBaCo2O5.5 by means of electrical resistivity, magnetoresistance, electroresistance and thermoelectric measurements in various conditions. In order to understand the complex conduction mechanism of LaBaCo2O5.5, the transport data have been analyzed using different theoretical models. The system shows semiconductor-semiconductor like transition (TSC) around 326K, corresponding to ferromagnetic transition and in the low temperature region resistivity data follows the Motts variable range hopping model. Interestingly, near and below the room temperature this compound depicts significant change in electro- and magnetoresistance behavior, the latter one is noteworthy near the magnetic phase boundary. The temperature dependence of thermopower, S(T), exhibits p-type polaronic conductivity in the temperature range of 60-320K and reaches a maximum value of 303 uV/K (at 120K). In the low temperature AFM region, the unusual S(T) behavior, generally observed for the cobaltite series LnBaCo2O5.5 (Ln = Rare Earth), is explained by the electron magnon scattering mechanism as previously described for perovskite manganites.
Owing to the energy shortages and various severe adverse effects of traditional fossil fuel power generation mechanisms, photovoltaic and thermoelectric materials are considered as the potential candidates for building non-traditional, efficient, and eco-friendly power generation portfolios. Lead-based perovskites have emerged as highly efficient, abundantly available, and low-cost materials for such applications but there are two major challenges i.e. chemical instability and the danger of toxic lead leaching that can badly affect both the environment and human health. Therefore, in search of…
The layered Bi-chalcogenide compounds have been drawing much attention as a new layered superconductor family since 2012. Due to the rich variation of crystal structure and constituent elements, the development of new physics and chemistry of the layered Bi-chalcogenide family and its applications as functional materials have been expected. Recently, it was revealed that the layered Bi chalcogenides can show a relatively high thermoelectric performance (ZT = 0.36 in LaOBiSSe at ~650 K). Here, we show the crystal structure variation of the Bi-chalcogenide family and their thermoelectric propert…
We have prepared polycrystalline samples of (Sr$_{1-x}$La$_x$)$_2$ErRuO$_6$ and (Sr$_{1-x}$La$_x$)$_2$YRuO$_6$, and have measured the resistivity, Seebeck coefficient, thermal conductivity, susceptibility and x-ray absorption in order to evaluate the electronic states and thermoelectric properties of the doped double-perovskite ruthenates. We have observed a large Seebeck coefficient of -160 $μ$V/K and a low thermal conductivity of 7 mW/cmK for $x$=0.1 at 800 K in air. These two values are suitable for efficient oxide thermoelectrics, although the resistivity is still as high as 1 $Ω$cm. From …
We predict high thermoelectric efficiency in the layered perovskite La$_2$Ti$_2$O$_7$, based on calculations (mostly ab-initio) of the electronic structure, transport coefficients, and thermal conductivity in a wide temperature range. The figure of merit $ZT$ computed with a temperature-dependent relaxation time increases monotonically from just above 1 at room temperature to over 2.5 at 1200 K, at an optimal carrier density of around 10$^{20}$ cm$^{-3}$. The Seebeck thermopower coefficient is between 200 and 300 $μ$V/K at optimal doping, but can reach nearly 1 mV/K at low doping. Much of the …
In spite of intensive studies on the chalcogenides as conventional thermoelectrics, it remains a challenge to find a proper material with high electrical but low thermal conductivities. In this work, we introduced a new class of thermoelectrics, Ge-based inorganic halide perovskites \ce{CsGeX3} (X = I, Br, Cl), which were already known as a promising candidate for photovoltaic applications. By performing the lattice-dynamics calculations and solving the Boltzmann transport equation, we revealed that these perovskites have ultralow thermal conductivities below 0.18 W m$^{-1}$ K$^{-1}$ while ver…
The thermoelectric properties of halide perovskites $\mathrm{CsMI_3}$ (M=Sn and Pb) are investigated from a combination of first-principles calculations and semiclassical Boltzmann transport theory by considering both the electron and phonon transport. The electronic part is performed using a modified Becke and Johnson (mBJ) exchange potential, including spin-orbit coupling (SOC), while the phonon part is computed using generalized gradient approximation (GGA). It is found that SOC has remarkable detrimental effect on n-type power factor, while has a negligible influence in p-type doping, whic…
Perovskite compounds have the potential to harvest solar energy as well as exploit the thermoelectric potential of a number of available materials. Here, we present the electronic, structural, thermoelectric, and optical properties of Cs2AgSbX6 (X = Cl, Br, I) perovskite with the help of the density functional theory (DFT). The WC-GGA approximation was used to calculate the structural parameters. All these compounds crystalize in a cubic unit cell with lattice constant increasing from 10.65 Å (Cl) to 11.14 Å (Br) to 11.86 Å (I). The mBJ-functional shows a semiconducting nature for these compou…
In-plane thermal conductivity of the thermoelectric layered cobalt oxides has been measured using the Harman method, in which thermal conductivity is obtained from temperature gradient induced by applied current. We have found that the charge reservoir block (the block other than the CoO$_2$ block) dominates the thermal conduction, where a nano-block integration concept is effective for material design. We have further found that the thermal conductivity shows a small but finite in-plane anisotropy between $a$ and $b$ axes, which can be ascribed to the misfit structure.
Distorted polyhedral architecture enabled high thermoelectric performance of columnar double halide perovskites Cs2AgPdCl5 and Cs2AgPtCl5
Jamia Millia Islamia（贾米阿米利娅伊斯兰大学）；Govt Naveen College（政府纳文学院）；Indian Institute of Technology, Jodhpur（印度理工学院乔德普尔分校）；University of Ulsan（蔚山大学）；Mody University of Science and Technology（莫迪科学与技术大学）
Oxygen octahedral distortions including tilts/rotations, deformations and off-centering in (layered) perovskites play the key role in their numerous functional properties. At the polar-centrosymmetric phase boundary in bi-layered perovskite Ca3-xSrxTi2O7 with x~1, we found the presence of abundant topological Z8 vortex-antivortex pairs, associated with four oxygen octahedral tilts at domains and another four different oxygen octahedral tilts at domain boundaries. Our discovery opens a new revenue to unveil topological defects associated with various types of oxygen octahedral distortions.
Inspired by the recent first-principles calculations showing the high thermoelectric performance of layered pnictogen chalcogenides, we experimentally characterise the crystal structure and high-temperature transport properties of the layered antimony selenides REOSbSe2 (RE = La, Ce). The crystal structure of REOSbSe2 was the tetragonal P4/nmm space group, consisting of alternate stacks of SbSe2 and REO layers. These two compounds were n-type semiconductors. The optical band gaps of LaOSbSe2 and CeOSbSe2 were evaluated to be 1.0 and 0.6 eV, respectively. The room-temperature thermal conductivi…
Layered-antiferromagnetic compound CuCrS2 has been prepared by different methods. The analysis of X-ray diffraction patterns of different samples gave significant amount of vacancy-disorder of Cr-atoms within the layers. Extended period of sintering above 9000C increases the transfer of Cr-atoms to the interstitial sites between the layers. This disorder has marginal effect on the Antiferromagnetic properties. The electrical conductivity is increased and the thermoelectric power remains positive and quite high between 150-400\muV/K in the paramagnetic state around room temperature with increas…
Researchers have addressed the non-traditional power generation schemes as alternatives to the traditional fossil-fuel methods enormously since the scientific community has serious concerns about shortages of energy on our planet for future generations. In this scenario, the innovative materials for photovoltaic and thermoelectric device applications are required by addressing current issues of instability and efficiency. Perovskites are very popular in this regard particularly having higher power conversion efficiency of 25.2% in the case of solar cells. In the current article, we investigate…
Thermoelectric power generation has been recognized as one of the most important technologies, and high-performance thermoelectric materials have long been pursued. However, because of the large number of candidate materials, this quest is extremely challenging, and it has become clear that a firm theoretical concept from the viewpoint of band-structure engineering is needed. In this study, we theoretically demonstrate that pnictogen-dichalcogenide layered compounds, which originally attracted attention as a family of superconductors and have recently been investigated as thermoelectric materi…
Although SbSe2-based layered compounds have been predicted to be high-performance thermoelectric materials and topological materials, most of these compounds obtained experimentally have been insulators so far. Here, we present the effect of Bi substitution on the thermoelectric properties of SbSe2-based layered compounds NdO0.8F0.2Sb1-xBixSe2 (x = 0-0.4). The room temperature electrical resistivity is decreased to 8.0 * 10^-5 ohmm for x = 0.4. The electrical power factor is calculated to be 1.4 * 10^-4 W/mK^2 at 660 K, which is in reasonable agreement with combined Jonker and Ioffe analysis. …
The single phase polycrystalline Ba1/4Sr3/4MnO3 layered perovskite manganite has been synthesized by combustion method having various crystallite sizes. The room temperature X-ray diffraction patterns reveal that Ba1/4Sr3/4MnO3 crystallizes into hexagonal crystal structure with space group P63/mmc as confirmed by Rietveld refinement. The scanning electron micrographs of Ba1/4Sr3/4MnO3 reveal uniform crystallite size of the samples. Effect of crystallite size on lattice strain and crystal structure has been studied using Rietveld refinement and Williamson-Hall plot, respectively. The structural…
We report the synthesis and thermoelectric transport properties of As-doped layered pnictogen oxyselenides NdO0.8F0.2Sb1-xAsxSe2 (x < 0.7), which are predicted to show high-performance thermoelectric properties based on first-principles calculation. The crystal structure of these compounds belongs to the tetragonal P4/nmm space group (No. 129) at room temperature. The lattice parameter c decreases with increasing x, while a remains almost unchanged among the samples. Despite isovalent substitution of As for Sb, electrical resistivity significantly rises with increasing x. Very low thermal cond…
Asceding interest of the scientific community in layered hybrid halide perovskites (LHHPs) as materials for innovative photovoltaic and optoelectronic applications led to unprecedented expansion of this family of compounds, reaching now several hundred refined structures. Despite the unique structural diversity of LHHPs, traditional approaches of describing their structures, such as dividing into Dion-Jacobson (DJ) or Ruddlesden-Popper (RP) phases for mostt structures are ambiguous and unquantifiable. Here, we introduced a quantitative layer shift factor (LSF) for a univocal classification and…
Nanostructured materials have emerged as an alternative to enhance the figure of merit (ZT) of thermoelectric (TE) devices. Graphene exhibits a high electrical conductivity (in-plane) that is necessary for a high ZT; however, this effect is countered by its impressive thermal conductivity. In this work TE layered devices composed of electrochemically exfoliated graphene (EEG) and a phonon blocking material such as poly (3,4-ethylenedioxythiophene)polystyrene sulfonate (PEDOT:PSS), polyaniline (PANI) and gold nanoparticles (AuNPs) at the interface were prepared. The figure of merit, ZT, of each…
The hybrid halide perovskites, the very performant compounds in photovoltaic applications, possess large Seebeck coefficient and low thermal conductivity making them potentially interesting high figure of merit ($ZT$) materials. For this purpose one needs to tune the electrical conductivity of these semiconductors to higher values. We have studied the CH$_3$NH$_3$MI$_3$ (M=Pb,Sn) samples in pristine form showing very low $ZT$ values for both materials; however, photoinduced doping (in M=Pb) and chemical doping (in M=Sn) indicate that, by further doping optimization, $ZT$ can be enhanced toward…
First-Principles Study of Novel Lead-Free Double Perovskite \b{eta}2SnGeX6 (\b{eta} = K, Rb; X = Cl, Br, I) for thermomechanical, optoelectronic and outstanding thermoelectric applications
Transition metal perovskite chalcogenides, a class of materials with rich tunability in functionalities, are gaining increased attention as candidate materials for renewable energy applications. Perovskite oxides are considered excellent n-type thermoelectric materials. Compared to oxide counterparts, we expect the chalcogenides to possess more favorable thermoelectric properties such as lower lattice thermal conductivity and smaller band gap, making them promising material candidates for high temperature thermoelectrics. Thus, it is necessary to study the thermal properties of these materials…
The possibility to segregate cobalt and iron in a single perovskite, at a nanoscale in the form of layers has been investigated, using sol gel technic synthesis. Quite remarkably, it is shown that such a nanoscale ordering, which can only be detected by a combined HAADF-STEM and EELS study, has a significant impact upon the magnetic properties of this SmFe0.5Co0.5O3 oxide. This suggests that careful nanoscale characterization of oxides will be necessary in the future before proceeding to a viable interpretation of their physical properties, at least in the field of magnetism.
Doping ferroelectrics with carriers is often detrimental to polarization. This makes the design and discovery of metals that undergo a ferroelectric-like transition challenging. In this letter, we show from first principles that the oxygen octahedral rotations in perovskites are often enhanced by electron doping, and this can be used as a means to strengthen the structural polarization in certain hybrid-improper ferroelectrics -- compounds in which the polarization is not stabilized by the long range Coulomb interactions but is instead induced by a trilinear coupling to octahedral rotations. W…
Extensive studies have been performed on layered compounds, ranging from layered cuprates to van der Waals materials with critical issues of intergrowths and stacking faults. However, such structures have been studied less because of experimental difficulty. We present characteristic defect structures of intergrowths in the Ruddlesden-Popper Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$, which is known to exhibit hybrid improper ferroelectricity. Transmission electron microscopy reveals that numerous intergrowths composed of 7 and 15 layers are introduced in the ferroelectric domains. Elemental maps demon…
We analyze the anisotropic electrical and thermal transport measurements in single crystals of In2Te5 belonging to monoclinic space group C12 c1 with the temperature gradient applied parallel and perpendicular to the crystallographic c-axis of the crystals. The thermal conductivity along the c-axis thermal conductivity parallel was found to smaller by a factor of 2 compared to the thermal conductivity along the direction perpendicular to the c-axis over the entire temperature range. In contrast, the Seebeck coefficient along the c-axis parallel was found to be higher than its value along the d…
The layered perovskite YBaCuFeO5 (YBCFO) is able to adopt chiral magnetic order up to unexpectedly high temperatures, paving the way to strong magnetoelectric coupling at room temperature. In this perovskite A-site cations are fully ordered whereas the occupancy of the B-sites strongly depend on the preparation process. Though the structure is not geometrically frustrated, the presence of partial Fe3+/Cu2+ disorder at the B-sites produces magnetic frustration. In an effort to increase the spin-orbit coupling in the system, we have synthesized and studied YBaCuFe0.95Mn0.05O5 in single crystal f…
In this study, we determined the different physical characteristics of nanoscale layered mixed Fe-Co layers of orthoferrite SmFe0.5Co0.5O3 based on magnetic and dielectric measurements.Magnetization analyzes showed that the system was antiferromagnetic with a magnetic transition around 310 K and two spin-reorientation transitions at around 192 K and 22 K.In this phase, the antisymmetric exchange interaction induced weak ferromagnetism due to canting of the magnetic spins in a similar manner to the Ln-Fe-Co system. Importantly, this nanoscale layered perovskite also exhibited a positive magneto…
Organic-inorganic hybrid halide perovskites, in which the A cations of an ABX$_3$ perovskite are replaced by organic cations, may be used for photovoltaic and solar thermoelectric applications. In this contribution, we systematically study three lead-free hybrid perovskites, i.e., methylammonium tin iodide CH$_3$NH$_3$SnI$_3$, ammonium tin iodide NH$_4$SnI$_3$, and formamidnium tin iodide HC(NH$_2$)$_2$SnI$_3$, by first-principles calculations. We find that in addition to the commonly known motif in which the corner-shared SnI$_6$ octahedra form a three-dimensional network, these materials may…
We present a first-principles investigation of ferroelectricity in layered perovskite oxide La2Ti2O7 (LTO), one of the compounds with highest Curie temperature known (1770 K). Our calculations reveal that LTO's ferroelectric transition results from the condensation of two soft modes that have the same symmetry and are strongly coupled anharmonically. Further, the leading instability mode essentially consists of rotations of the oxygen octahedra that are the basic building block of the perovskite structure; remarkably, because of the particular topology of the lattice, such O6 rotations give ra…
Polycrystalline sample of the new layered superconductor Bi4O4S3 is successfully synthesized by solid-state reaction method by using Bi, S and Bi2O3 powders with one step reaction. The superconducting transition temperature (Tconset=4.5 K), the zero resistance transition temperature (Tc0=4.07 K) and the diamagnetic transition temperature (4.02 K at H=10 Oe) were confirmed by electrical transport and magnetic measurements. Also, our results indicate a typical type II-superconductor behavior. In addition, a large thermoelectric effect was observed with a dimensionless thermoelectric figure of me…
For a class of 2D hybrid organic-inorganic perovskite semiconductors based on $π$-conjugated organic cations, we predict quantitatively how varying the organic and inorganic component allows control over the nature, energy and localization of carrier states in a quantum-well-like fashion. Our first-principles predictions, based on large-scale hybrid density-functional theory with spin-orbit coupling, show that the interface between the organic and inorganic parts within a single hybrid can be modulated systematically, enabling us to select between different type-I and type-II energy level alig…
Doubling the perovskite cell (double perovskite) has been found to open new possibilities for engineering functional materials, magnetic materials in particular. This route should be applicable to the antiperovskite (aPV) class. In the pnictide based double aPV (2aPV) class introduced here magnetism is very rare, and we address them as new topological materials, possibly with thermoelectric interest. We have found that the 2aPV supercell provides a systematically larger band gap that can serve to inhibit bulk conductivity, and also large spin-orbit coupling (SOC) for band inversion. We present…
Dielectric study on Ca3Mn2O7 features relaxor-like segmented dynamics below the antiferromagnetic ordering. Dipolar relaxations of different origin are spectrally resolved exhibiting distinct H-field alterations. This identifies their allegiance to different magnetic sub-phases and establishes dual coupling of electrical, magnetic, and structural degrees of freedom. Further, strong spin-lattice coupling has been affirmed with Raman spectroscopy across the magnetic ordering. Short-range electrical correlations collaterally cause measurable harmonic dielectric response in the system. The \c{hi}_…
Recently, layered hybrid perovskites have been attracting huge interest due to a wide range of possible chemical compositions and the resulting tunability of the materials properties. In this study, we investigate the effect of the chain length of the organic ligands on the optical properties of stacks of two dimensional perovskite layers consisting of alkylammonium lead iodide (CnH2n+1NH3)2PbI4 with n=4-18. Photoluminescence and absorption spectroscopy reveal a blueshift with increasing chain length n including a jump of 110 meV between the n=10 and n=12 ligands due to a change in octahedral …
While the tetragonal antiferro-electrically distorted (AFD) phase with space group $I4/mcm$ is well known for SrTiO$_3$ to occur below 105 K, there are also some hints in literature of an orthorhombic phase, either at lower temperature at high pressure. A previously proposed orthorhombic layered structure of SrTiO$_3$, known as the post-perovskite or CaIrO$_3$ structure with space group $Cmcm$ is shown to have significantly higher energy than the cubic or tetragonal phase and to have its minimum volume at larger volume than cubic perovskite. It thus cannot correspond to a high-pressure phase o…
We have investigated the thermoelectric properties of the novel layered bismuth chalcogenides LaOBiS2-xSex. The partial substitution of S by Se produced the enhancement of electrical conductivity (metallic characteristics) in LaOBiS2-xSex. The power factor largely increased with increasing Se concentration. The highest power factor was 4.5 uW/cmK2 at around 470 deg. C for LaOBiS1.2Se0.8. The obtained dimensionless figure-of-merit (ZT) was 0.17 at around 470 deg. C in LaOBiS1.2Se0.8.
Layered halide perovskites are solution-processed natural heterostructures where quantum and dielectric confinement effects down to the nanoscale strongly influence the optical properties, leading to stabilization of bound excitons. Achieving a detailed understanding of the exciton properties is crucial to boost the exploitation of these materials in energy conversion and light emission applications, with current on-going debate related to the energy order of the four components of the most stable exciton. To provide theoretical feedback and solve among contrasting literature reports, we perfo…
Small cations such as guanidinium and cesium can act as templating cations to form low dimensional phases (2D, 1D, 0D) in the case of excess of organic halides. However, such phases with the widely used formamidinium (FA+) cation have not been reported so far. In this study, we discovered two novel low dimensional phases with a composition of FA2PbBr4 and investigated the prerequisites of their formation upon crystallization of FABr-excessive solutions of FAPbBr3. We found that both phases have the structure of (110) layered perovskite but are represented by two different polymorphs with eclip…
Materials combining the optoelectronic functionalities of semiconductors with control of the spin degree of freedom are highly sought after for the advancement of quantum technology devices. Here, we report the paramagnetic Ruddlesden-Popper hybrid perovskite Mn:(PEA)2PbI4 (PEA = phenethylammonium) in which the interaction of isolated Mn2+ ions with magnetically brightened excitons leads to circularly polarized photoluminescence. Using a combination of superconducting quantum interference device (SQUID) magnetometry and magneto-optical experiments, we find that the Brillouin-shaped polarizatio…
Crystallography and dielectric properties in Dion-Jacobson layered perovskites, CsNdNb$_2$O$_7$ and RbNdNb$_2$O$_7$, have been examined in dense polycrystalline samples, and polarization hysteresis loops that substantiate ferroelectricity have been observed at room temperature. The theoretical mechanism for the spontaneous polarization, "hybrid improper ferroelectric mechanism,'' induced by a combination of two types of non-polar octahedral rotations, is confirmed in these two phases. Our samples show remanent polarizations of 2-3 $μ$C/cm$^2$, which are much larger than those obtained in polyc…
2D layered hybrid organic-inorganic perovskites (HOIPs) have demonstrated improved stability and promising photovoltaic performance. The mechanical properties of such functional materials are both fundamentally and practically important to achieve both high performance and mechanical stable (flexible) devices. Here we report the mechanical properties of a series of 2D layered lead iodide HOIPs and investigate the role of structural sub-units (e.g., variation of the length of the organic spacer molecules -R and the number of inorganic layer -n) on the mechanical properties. While 2D HOIPs have …
Two-dimensional (2D) perovskite materials have recently re-attracted intense research interest for applications in photovoltaics and optoelectronics. As a consequence of the dielectric and quantum confinement effect, they show strongly bound and stable excitons at room temperature. In this report, the band-edge exciton fine structure and in particular its exciton and biexciton dynamics in high quality crystals of (PEA)2PbI4 are investigated. A comparison of bulk and surface exciton lifetimes yields a room temperature surface recombination velocity of 2x10^3cm/s and an intrinsic lifetime of 185…
Stacking-dependent thermoelectric transport in layered Sc_2Si_2Te_6 from first principles
Key Laboratory of Advanced Materials and Devices for Post-Moore Chips, Ministry of Education, University of Science and Technology Beijing（教育部先进后摩尔芯片器件重点实验室，北京科技大学）；School of Mathematics and Physics, University of Science and Technology Beijing（北京科技大学数理学院）
