Prediction of the High Thermoelectric Performance of Pnictogen Dichalcogenide Layered Compounds with Quasi-One-Dimensional Gapped Dirac-like Band Dispersion
Thermoelectric power generation has been recognized as one of the most important technologies, and high-performance thermoelectric materials have long been pursued. However, because of the large number of candidate materials, this quest is extremely challenging, and it has become clear that a firm theoretical concept from the viewpoint of band-structure engineering is needed. In this study, we theoretically demonstrate that pnictogen-dichalcogenide layered compounds, which originally attracted attention as a family of superconductors and have recently been investigated as thermoelectric materials, can exhibit very high thermoelectric performance with elemental substitution. In particular, we clarify a promising guiding principle for materials design and find that LaOAsSe$_2$, a material that has yet to be synthesized, has a powerfactor that is six times as large as that of the known compound LaOBiS$_2$ and can exhibit a very large $ZT$ under some plausible assumptions. This large enhancement of the thermoelectric performance originates from the quasi-one-dimensional gapped Dirac-like band dispersion, which is realized by the square-lattice network. Our study offers one ideal limit of the band structure for thermoelectric materials. Because our target materials have high controllability of constituent elements and feasibility of carrier doping, experimental studies along this line are strongly awaited.
We report the synthesis and thermoelectric transport properties of As-doped layered pnictogen oxyselenides NdO0.8F0.2Sb1-xAsxSe2 (x < 0.7), which are predicted to show high-performance thermoelectric properties based on first-principles calculation. The crystal structure of these compounds belongs to the tetragonal P4/nmm space group (No. 129) at room temperature. The lattice parameter c decreases with increasing x, while a remains almost unchanged among the samples. Despite isovalent substitution of As for Sb, electrical resistivity significantly rises with increasing x. Very low thermal cond…
Ternary chalcogenides have been of recent investigation for applications in photovoltaic and thermoelectric devices. We study the structural, electronic, optical, and thermoelectric properties of nine ternary chalcogenides, NaAX$_{2}$, where A represents pnictogens (As, Sb, and Te) and X represents chalcogens (S, Se, and Te). Calculations based on density functional theory yield the following results: (i) phonon dispersion curves predict three of the compounds, NaAsS$_{2}$, NaSbS$_{2}$, and NaSbSe$_{2}$, to be dynamically stable in the monoclinic, C2/c, structure, (ii) the layered atomistic co…
First principles calculations are used to investigate electronic band structure and vibrational spectra of pnictogen substituted ternary skutterudites. We compare the results with the prototypical binary composition CoSb$_3$ to identify the effects of substitutions on the Sb site, and evaluate the potential of ternary skutterudites for thermoelectric applications. Electronic transport coefficients are computed within the Boltzmann transport formalism assuming a constant relaxation time, using a new methodology based on maximally localized Wannier function interpolation. Our results point to a …
LaOBiPbS$_3$ is a kind of pnictogen-dichalcogenide layered compounds, which have recently been experimentally investigated as thermoelectric materials owing to their low thermal conductivity and high controllability of constituent elements. However, thermoelectric performance of LaOBiPbS$_3$ is at present not very high and that of its analogous compounds remains to be unknown. In this study, we theoretically investigate thermoelectric properties of 24 possible variations of the constituent elements in LaOBiPbS$_3$ from the viewpoint of the electronic structure. We find that some compounds can …
Two-dimensional group IV transition-metal dichalcogenides have encouraging thermoelectric applications since their electronic and lattice properties can be manipulated with strain. In this paper, we report the thermoelectric parameters such as electrical conductivity, Seebeck coefficients, electrical relaxation times, and the mode dependent contributions to the lattice thermal conductivity of ZrX$_2$ (X = S, Se, Te) from first principles methods. Our calculations indicate that due to tensile strain, the powerfactor increases while simultaneously decreasing the lattice thermal conductivity thus…
Motivated by the possibility of further improving the thermoelectric properties of skutterudites we investigate charge transfer and bonding in this class of materials using density functional calculations. Results for the CoP3, CoSb3, LaFe4P12 and the hypothetical FeP3 compounds are presented using the procrystal as the non-binding reference. Spherical integration and Bader analysis are performed to illustrate charge transfer differences between these compounds. The results are in good qualitative agreement with simple electronegativity considerations. The calculations confirm that the transit…
The experimental studies about monolayer transition metal dichalcogenides in the recent year reveal this kind of compounds have many metastable phases with unique physical properties, not just 1H phases. Here, we focus on the 1T'' phase and systematically investigate the electronic structures and transport properties of MX2 (M=Mo, W; X=S, Se, Te) using the first-principles calculations with Boltzmann transport theory. And among them, only three molybdenum compounds has small direct bandgap at K point, which derive from the distortion of octahedral-coordination [MoS6]. For these three cases, ho…
Doubling the perovskite cell (double perovskite) has been found to open new possibilities for engineering functional materials, magnetic materials in particular. This route should be applicable to the antiperovskite (aPV) class. In the pnictide based double aPV (2aPV) class introduced here magnetism is very rare, and we address them as new topological materials, possibly with thermoelectric interest. We have found that the 2aPV supercell provides a systematically larger band gap that can serve to inhibit bulk conductivity, and also large spin-orbit coupling (SOC) for band inversion. We present…
Inspired by the recent first-principles calculations showing the high thermoelectric performance of layered pnictogen chalcogenides, we experimentally characterise the crystal structure and high-temperature transport properties of the layered antimony selenides REOSbSe2 (RE = La, Ce). The crystal structure of REOSbSe2 was the tetragonal P4/nmm space group, consisting of alternate stacks of SbSe2 and REO layers. These two compounds were n-type semiconductors. The optical band gaps of LaOSbSe2 and CeOSbSe2 were evaluated to be 1.0 and 0.6 eV, respectively. The room-temperature thermal conductivi…
The electronic and thermoelectric properties of one to four monolayers of MoS$_{2}$, MoSe$_{2}$, WS$_{2}$, and WSe$_{2}$ are calculated. For few layer thicknesses,the near degeneracies of the conduction band $K$ and $Σ$ valleys and the valence band $Γ$ and $K$ valleys enhance the n-type and p-type thermoelectric performance. The interlayer hybridization and energy level splitting determine how the number of modes within $k_BT$ of a valley minimum changes with layer thickness. In all cases, the maximum ZT coincides with the greatest near-degeneracy within $k_BT$ of the band edge that results in…
The thermoelectric properties of the three pyrite-type IIB-VIA2 dichalcogenides (ZnS2, CdS2 and CdSe2) are systematically investigated and compared with those of the prototype ZnSe2 in order to optimize their thermoelectric properties. Using the phonon Boltzmann transport equation, we find that they all have ultralow lattice thermal conductivities. By analyzing their vibrational properties, these are attributed to soft phonon modes derived from the loosely bound rattling-like metal atoms and to strong anharmonicities caused by the vibrations of all atoms perpendicular to the strongly bound non…
We present a study on the modification of the electronic structure and hole-doping effect for the layered dichalcogenide WSe_2 with a multi-valley band structure, where Ta is doped on the W site along with a partial substitution of Te for its lighter counterpart Se. By means of band-structure calculations and specific-heat measurements, the introduction of Te is theoretically and experimentally found to change the electronic states in WSe_2. While in WSe_2 the valence-band maximum is located at the Gamma point, the introduction of Te raises the bands at the K point with respect to the Gamma po…
The presence of lone pair (LP) electrons is strongly associated with the disruption of lattice heat transport, which is a critical component of strategies to achieve efficient thermoelectric energy conversion. By exploiting an empirical relationship between lattice thermal conductivity $κ_L$ and the bond angles of pnictogen group LP cation coordination environments, we develop an inverse design strategy based on a materials database screening to identify chalcogenide materials with ultralow $κ_L$ for thermoelectrics. Screening the $\sim$ 635,000 real and hypothetical inorganic crystals of the …
The electronic structures and thermoelectric properties of semiconducting transition-metal dichalcogenide monolayers $\mathrm{MX_2}$ (M=Zr, Hf, Mo, W and Pt; X=S, Se and Te) are investigated by combining first-principles and Boltzmann transport theory, including spin-orbital coupling (SOC). It is found that the gap decrease increases from S to Te in each cation group, when the SOC is opened. The spin-orbital splitting has the same trend with gap reducing. Calculated results show that SOC has noteworthy detrimental effect on p-type power factor, while has a negligible influence in n-type doping…
Interest in the application of thermoelectric devices for renewable energy has risen over the past decade. In this paper, we calculate the transport properties of various configurations of the transition metal dichalcogenide (TMD) MSe$_2$ (M = Hf, Zr, Ti) in search of promising thermoelectric materials at low/high temperatures. We explore the properties of the pure monolayer at discrete levels of biaxial tensile strain (epsilon = 0%, 2%, 4%, 8%), as well as those of the van der Waals heterobilayers MSe$_2$/MSe$_2$ using first-principles calculations combined with semi-classical Boltzmann trans…
We systematically study the effect of high pressure on the structure, electronic structure and transport properties of 2H-MoS$_2$, based on first-principles density functional calculations and the Boltzmann transport theory. Our calculation shows a vanishing anisotropy in the rate of structural change at around 25 GPa, in agreement with the experimental data. A conversion from van der Waals(vdW) to covalent-like bonding is seen. Concurrently, a transition from semiconductor to metal occurs at 25 GPa from band structure calculation. Our transport calculations also find pressure-enhanced electri…
The search for thermoelectrics with higher figures of merit (ZT) will never stop due to the demand of heat harvesting. Single layer transition metal dichalcogenides (TMD), namely MX2 (where M is a transition metal and X is a chalcogen) that have electronic band gaps are among the new materials that have been the focus of such research. Here, we investigate the thermoelectric transport properties of hybrid armchair-edged TMDs nanoribbons, by using the nonequilibrium Green's function technique combined with the first principles and molecular dynamics methods. We find a ZT as high as 7.4 in hybri…
Dielectric screening plays an important role in reducing the strength of carrier scattering and trapping by point defects for many semiconductors such as the halide perovskite solar materials. However, it was rarely considered as a screen to find new electronic semiconductors. We performed a material search study using the dielectric properties as a screen to identify potential electronic materials in the class of metal-pnictide ternary sulfosalts, containing Bi or Sb. These salts are basically ionic due to the electronegativity difference between the S and both the metal and pnictogen element…
Strain engineering is a very effective method to tune electronic, optical, topological and thermoelectric properties of materials. In this work, we systematically study biaxial strain dependence of electronic structures and thermoelectric properties (both electron and phonon parts) of monolayer $\mathrm{PtSe_2}$ with generalized gradient approximation (GGA) plus spin-orbit coupling (SOC) for electron part and GGA for phonon part. Calculated results show that compressive or tensile strain can induce conduction band minimum (CBM) or valence band maximum (VBM) transition, which produces important…
A high power factor and low lattice thermal conductivity are two essential ingredients of highly efficient thermoelectric materials. Although monolayers of transition metal dichalcogenides possess high power factors, high lattice thermal conductivities significantly impede their practical applications. Our first-principles calculations show that these two ingredients are well fulfilled in the recently synthesized Pd$_{2}$Se$_{3}$ monolayer, whose crystal structure is composed of [Se$_{2}$]$^{2-}$ dimers, Se$^{2-}$ anions, and Pd$^{2+}$ cations coordinated in a square planar manner. Our detaile…
Monolayer semiconductors of group-VA elements (As, Sb, Bi) with graphenelike buckled structure offer a potential to achieve nanoscale electronic, optoelectronic and thermoelectric devices. Motivated by recently-fabricated Sb monolayer, we systematically investigate the thermoelectric properties of $β$-As, Sb and Bi monolayers by combining the first-principles calculations and semiclassical Boltzmann transport theory. The generalized gradient approximation (GGA) plus spin-orbit coupling (SOC) is adopted for the electron part, and GGA is employed for the phonon part. It is found that SOC has imp…
Lots of two-dimensional (2D) materials have been predicted theoretically, and further confirmed in experiment, which have wide applications in nanoscale electronic, optoelectronic and thermoelectric devices. Here, the thermoelectric properties of ATeI (A=Sb and Bi) monolayers are systematically investigated, based on semiclassical Boltzmann transport theory. It is found that spin-orbit coupling (SOC) has important effects on electronic transport coefficients in p-type doping, but neglectful influences on n-type ones. The room-temperature sheet thermal conductance is 14.2 $\mathrm{W K^{-1}}$ fo…
We report a configuration strategy for improving the thermoelectric (TE) performance of two-dimensional (2D) transition metal dichalcogenide (TMDC) WS2 based on the experimentally prepared WS2/WSe2 lateral superlattice (LS) crystal. On the basis of density function theory combined with Boltzmann transport equation, we show that the TE figure of merit zT of monolayer WS2 is remarkably enhanced when forming into a WS2/WSe2 LS crystal. This is primarily ascribed to the almost halved lattice thermal conductivity due to the enhanced anharmonic processes. Electronic transport properties parallel (xx…
Two-dimensional transition metal dichalcogenides show great potential as promising thermoelectric materials due to their lower dimensionality, the unique density of states and quantum confinement of carriers. The effect of mechanical strain on the thermoelectric performances of monolayer WS 2 has been investigated using density functional theory associated with semiclassical Boltzmann transport theory. The variation of Seebeck coefficient and band gap with applied strain has followed the same type of trend. For n-type material the relaxation time scaled power factor(S 2 σ/τ) increases by the a…
The quest for high-efficiency heat-to-electricity conversion has been one of the major driving forces towards renewable energy production for the future. Efficient thermoelectric devices require high voltage generation from a temperature gradient and a large electrical conductivity, while maintaining a low thermal conductivity. For a given thermal conductivity and temperature, the thermoelectric powerfactor is determined by the electronic structure of the material. Low dimensionality (1D and 2D) opens new routes to high powerfactor due to the unique density of states (DOS) of confined electron…
Monolayer transition metal dichalcogenides in the distorted octahedral 1T$^\prime$ phase exhibit a large bulk bandgap and gapless boundary states, which is an asset in the ongoing quest for topological electronics. In single-layer tungsten diselenide (WSe$_2$), the boundary states have been observed at well ordered interfaces between 1T$^\prime$ and semiconducting (1H) phases. This paper proposes an effective 4-band theory for the boundary states in single-layer WSe$_2$,describing a Kramers pair of in-gap states as well as the behaviour at the spectrum termination points on the conduction and …
Since the discovery of graphene, a tremendous amount of two dimensional (2D) materials have surfaced. Their electronic properties can usually be well understood without considering correlations between electrons. On the other hand, strong electronic correlations are known to give rise to a variety of exotic properties and new quantum phases, for instance, high temperature superconductivity, heavy fermions and quantum spin liquids. The study of these phenomena has been one of the main focuses of condensed matter physics. There is a strong incentive to introduce electronic correlations into 2D m…
In this review article, we discuss the synthesis, properties, and novel device applications of low-symmetry 2D materials, including black phosphorus and its arsenic alloys, compounds with black-phosphorus like structure such as the monochalcogenides of group IV elements like Ge and Sn, as well as the class of low-symmetry transition metal dichalcogenide (TMDC) materials such as rhenium disulfide (ReS2) and rhenium diselenide (ReSe2). Their unique physical properties resulting from the low symmetry in-plane crystal structure and the prospects of their application in nanoelectronics and nanophot…
One novel family of two-dimensional IV-V compounds have been proposed, whose dynamical stabilities and electronic properties have been systematically investigated using the density functional theory. Extending from our previous work, two phases of carbon phosphorus bilayers α- and β-C$_{2}$P$_{2}$ have been proposed. Both of them are dynamically stable and thermally stable at 300K. They possess intrinsic HSE gaps of 2.70 eV and 2.67 eV, respectively. Similar α- and β-C$_{2}$Y$_{2}$ (Y= As, Sb, and Bi) can be obtained if the phosphorus atoms in the α- and β-C$_{2}$P$_{2}$ replaced by other pnic…
