Transistors operating at high frequencies are the basic building blocks of millimeter-wave communication and sensor systems. The high velocity and mobility of carriers in graphene can open way for ultra-fast group IV transistors with similar or even better performance than can be achieved with III-V based semiconductors. However, the progress of high-speed graphene transistors has been hampered due to fabrication issues, influence of adjacent materials, and self-heating effects. Here, we report a graphene field-effect transistor (FET) on a diamond substrate, with a $f_{max}$ up to 54 GHz for a gate length of 500 nm. The high thermal conductivity of diamond provides an efficient heat-sink, and its relatively high optical-phonon energy improves saturation velocity of carriers in the graphene channel. Moreover, we show that graphene FETs on diamond, with different gate lengths, exhibit excellent scaling behavior. These results indicate that graphene FETs on diamond technology can reach sub-terahertz frequency performance.
An analogue of the Datta-Das spin FET is investigated, which is all-graphene and based on the valley degree of freedom of electrons / holes. The "valley FET" envisioned consists of a quantum wire of gapped graphene (channel) sandwiched between two armchair graphene nanoribbons (source and drain), with the following correspondence to the spin FET: valley (K and K') \leftrightarrow spin (up and down), armchair graphene nanoribbons \leftrightarrow ferromagnetic electrodes, graphene quantum wire \leftrightarrow semiconductor quantum wire, valley-orbit interaction \leftrightarrow Rashba spin-orbit …
We describe a simple and scalable method for the transfer of CVD graphene for the fabrication of field effect transistors. This is a dry process that uses a modified RCA cleaning step to improve the surface quality. In contrast to conventional fabrication routes where lithographic steps are performed after the transfer, here graphene is transferred to a pre-patterned substrate. The resulting FET devices display nearly zero Dirac voltage, and the contact resistance between the graphene and metal contacts is on the order of 910 +- 340 Ohm-micrometer. This approach enables formation of conducting…
We explore the device potential of tunable-gap bilayer graphene FET exploiting the possibility of opening a bandgap in bilayer graphene by applying a vertical electric field via independent gate operation. We evaluate device behavior using atomistic simulations based on the self-consistent solution of the Poisson and Schroedinger equations within the NEGF formalism. We show that the concept works, but bandgap opening is not strong enough to suppress band-to-band tunneling in order to obtain a sufficiently large Ion/Ioff ratio for CMOS device operation.
This letter reports the impact of surface morphology on the carrier transport and RF performance of graphene FETs formed on epitaxial graphene films synthesized on SiC substrates. Such graphene exhibits long terrace structures with widths between 3-5 μm and steps of 10\pm2 nm in height. While a carrier mobility above 3000 cm2/Vs at a carrier density of 1e12 cm-2 is obtained in a single graphene terrace domain at room temperature, the step edges can result in a vicinal step resistance of ~21 kΩ.μm. By orienting the transistor layout so that the entire channel lies within a single graphene terra…
A dual-gate graphene field-effect transistors is presented, which shows improved RF performance by reducing the access resistance using electrostatic doping. With a carrier mobility of 2700 cm2/Vs, a cutoff frequency of 50 GHz is demonstrated in a 350-nm gate length device. This fT value is the highest frequency reported to date for any graphene transistor, and it also exceeds that of Si MOSFETs at the same gate length, illustrating the potential of graphene for RF applications.
Through self-consistent quantum transport simulations, we evaluate the RF performance of monolayer graphene FETs in the bias region of negative output differential resistance. We show that, compared to the region of quasi-saturation, a voltage gain larger than 10 can be obtained, at the cost of a decrease in the maximum oscillation frequency of about a factor of 1.5--3 and the need for a careful circuit stabilization.
Diamond field-effect transistors (FETs) have potential applications in power electronics and high-output high-frequency amplifications. In such applications, high charge-carrier mobility is desirable for a reduced loss and high-speed operation. We have recently fabricated diamond FETs with a hexagonal-boron-nitride gate dielectric and observed a high mobility above 300 cm$^{2}$V$^{-1}$s$^{-1}$. In this study, we examine which scattering mechanism limits the mobility of our FETs through theoretical calculations. Our calculations reveal that the dominant carrier scattering is caused by surface c…
A tunneling field effect transistor based on armchair graphene nanoribbons is studied using ballistic quantum transport simulation based on 3D real space nonequilibrium Green's function formalism. By introducing a pocket doping region near the source, the performance of GNRs TFET is improved in terms of larger on current and steeper subthreshold swings compared to conventional tunneling FET. It is also found that pocket region introduces two interesting features. By increasing the pocket length the ambipolar can be effectively suppressed. Furthermore, there is negative trans-conductance at neg…
In this work, a modified, lumped element graphene field effect device model is presented. The model is based on the "Top-of-the-barrier" approach which is usually valid only for ballistic graphene nanotransistors. Proper modifications are introduced to extend the model's validity so that it accurately describes both ballistic and diffusive graphene devices. The model is compared to data already presented in the literature. It is shown that a good agreement is obtained for both nano-sized and large area graphene based channels. Accurate prediction of drain current and transconductance for both …
Phase- and angle-sensitive terahertz hot-electron bolometric plasmonic detectors based on FETs with graphene channel and composite h-BN/black-P/h-BN gate layer
A heterojunction tunneling field effect transistor based on armchair graphene nanoribbons is proposed and studied using ballistic quantum transport simulation based on 3D real space nonequilibrium Green's function formalism. By using low band gap nanoribbons as the source/drain material, the hetero- structure shows better performance including higher on current, lower off current, and improved steep subthreshold swings compared with homostructure. It is also found the device performance greatly depends on the source/drain dopping density. High doping density leads to fewer density states in th…
We evaluate the proposed resonant terahertz (THz) detectors on the base of field-effect transistors (FETs) with split gates, electrically induced lateral p-n junctions, uniform graphene layer (GL) or perforated (in the p-n junction depletion region) graphene layer (PGL) channel. The perforated depletion region forms an array of the nanoconstions or nanoribbons creating the barriers for the holes and electrons. The operation of the GL-FET- and PGL-FET detectors is associated with the rectification of the ac current across the lateral p-n junction enhanced by the excitation of bound plasmonic os…
In this work, we clarify the physical mechanism for the phenomenon of negative output differential resistance (NDR) in short-channel graphene FETs (GFETs) through non-equilibrium Green's function (NEGF) simulations and a simpler semianalytical ballistic model that captures the essential physics. This NDR phenomenon is due to a transport mode bottleneck effect induced by the graphene Dirac point in the different device regions, including the contacts. NDR is found to occur only when the gate biasing produces an n-p-n or p-n-p polarity configuration along the channel, for both positive and negat…
As conventional silicon technology is approaching its fundamental material and physical limits with continuous scaling, there is a growing push to look for new platform to design memory circuits for nanoelectronic applications. In this paper we explore new design concept of nonvolatile memory based on graphene nanotechnology. The investigation focuses on two forms of graphene based field effect transistor (FET) carbon nanotube FET (CNTFET) and graphene nanoribbon FET (GNRFET). The analysis reveals that GNRFET with a high trapping capable oxide layer is suitable for ultra high ensity nonvolatil…
This paper reviews the current status of graphene transistors as potential supplement to silicon CMOS technology. A short overview of graphene manufacturing and metrology methods is followed by an introduction of macroscopic graphene field effect transistors (FETs). The absence of an energy band gap is shown to result in severe shortcomings for logic applications. Possibilities to engineer a band gap in graphene FETs including quantum confinement in graphene Nanoribbons (GNRs) and electrically or substrate induced asymmetry in double and multi layer graphene are discussed. Graphene FETs are sh…
Liquid-based applications of biomolecule-decorated field-effect transistors (FETs) range from biosensors to in vivo implants. A critical scientific challenge is to develop a quantitative understanding of the gating effect of charged biomolecules in ionic solution and how this influences the readout of the FETs. To address this issue, we fabricated protein-decorated graphene FETs and measured their electrical properties, specifically the shift in Dirac voltage, in solutions of varying ionic strength. We found excellent quantitative agreement with a model that accounts for both the graphene pola…
In-Substrate Imaging of Diamond hBN FET Current via Widefield Quantum Diamond Microscopy
Indian Institute of Technology Bombay（印度理工学院孟买分校）；Indian Institute of Science（印度科学学院）；Tata Consultancy Services（塔塔咨询服务公司）；National Institute for Materials Science（国立材料研究所）
A graphene channel field-effect biosensor is demonstrated for detecting the binding of double-stranded DNA and poly-l-lysine. Sensors consist of CVD graphene transferred using a clean, etchant-free transfer method. The presence of DNA and poly-l-lysine are detected by the conductance change of the graphene transistor. A readily measured shift in the Dirac Voltage (the voltage at which the graphenes resistance peaks) is observed after the graphene channel is exposed to solutions containing DNA or poly-l-lysine. The Dirac voltage shift is attributed to the binding/unbinding of charged molecules …
A bilayer graphene based electrostatically doped tunnel field-effect transistor (BED-TFET) is proposed in this work. Unlike graphene nanoribbon TFETs in which the edge states deteriorate the OFF-state performance, BED-TFETs operate based on different bandgaps induced by vertical electric fields in the source, channel, and drain regions without any chemical doping. The performance of the transistor is evaluated by self-consistent quantum transport simulations. This device has several advantages: 1) ultra-low power (VDD=0.1V), 2) high performance (ION/IOFF>104), 3) steep subthreshold swing (SS<1…
In this work, we propose the Bilayer Graphene Tunnel Field Effect Transistor (BG-TFET) as a device suitable for fabrication and circuit integration with present-day technology. It provides high Ion/Ioff ratio at ultra-low supply voltage, without the limitations in terms of prohibitive lithography and patterning requirements for circuit integration of graphene nanoribbons. Our investigation is based on the solution of the coupled Poisson and Schroedinger equations in three dimensions, within the Non-Equilibrium Green (NEGF) formalism on a Tight Binding Hamiltonian. We show that the small achiev…
A graphene field-effect-transistor (GFET) model calibrated with extracted device parameters and a commercial 65 nm silicon MOSFET model are compared with respect to their radio frequency behavior. GFETs slightly lag behind CMOS in terms of speed despite their higher mobility. This is counterintuitive, but can be explained by the effect of a strongly nonlinear voltage-dependent gate capacitance. GFETs achieve their maximum performance only for narrow ranges of VDS and IDS, which must be carefully considered for circuit design. For our parameter set, GFETs require at least μ = 3000 cm2 V-1 s-1 t…
Negative differential resistance (NDR) with room temperature peak-valley-ratio of 8 has been observed in a ballistic field-effect-transistor (FET) based on graphene, having an oblique top gate. Graphene FETs with a top gate inclination angle of 45 degrees and a drain-source distance of 400 nm were fabricated on a chip cut from a 4 inch graphene wafer grown by CVD. From the 60 measured devices, NDR was observed only in the regions where the CVD graphene displays the Raman signature of defectless monolayers. In other specific positions on the wafer, where graphene quality was not high enough and…
Hysteresis and commonly observed p-doping of graphene based field effect transistors (FET) was already discussed in reports over last few years. However, the interpretation of experimental works differs; and the mechanism behind the appearance of the hysteresis and the role of charge transfer between graphene and its environment are not clarified yet. We analyze the relation between electrochemical and electronic properties of graphene FET in moist environment extracted from the standard back gate dependence of the graphene resistance. We argue that graphene based FET on a regular SiO2 substra…
Inelastic phonon scattering in graphene field-effect transistors (FETs) is studied by numerically solving the Boltzmann transport equation in three dimensional real and phase spaces (x, kx, ky). A kink behavior due to ambipolar transport agreeing with experiments is observed. While low field behavior has previously been mostly attributed to elastic impurity scattering in earlier studies, it is found in the study that even low field mobility is affected by inelastic phonon scattering in recent graphene FET experiments reporting high mobilities . As the FET is biased in the saturation regime, th…
We propose an analytical device model for a graphene nanoribbon field-effect transistor (GNR-FET). The GNR-FET under consideration is based on a heterostructure which consists of an array of nanoribbons clad between the highly conducting substrate (the back gate) and the top gate controlling the dc and ac source-drain currents. Using the model developed, we derive explicit analytical formulas for the GNR-FET transconductance as a function of the signal frequency, collision frequency of electrons, and the top gate length. The transition from the ballistic and to strongly collisional electron tr…
We present an atomistic three-dimensional simulation of graphene nanoribbon field effect transistors (GNR-FETs), based on the self-consistent solution of the 3D Poisson and Schroedinger equation with open boundary conditions within the non-equilibrium Green's Function formalism and a tight-binding hamiltonian. With respect to carbon nanotube FETs, GNR-FETs exhibit comparable performance, reduced sensitivity on the variability of channel chirality, and similar leakage problems due to band-to-band tunneling. Acceptable transistor performance requires effective nanoribbon width of 1-2 nm, that co…
Graphene is a promising candidate for the development of detectors of Terahertz (THz) radiation. A well-known detection scheme due to Dyakonov and Shur exploits the confinement of plasma waves in a field-effect transistor (FET), whereby a dc photovoltage is generated in response to a THz field. This scheme has already been experimentally studied in a graphene FET [L. Vicarelli et al., Nature Mat. 11, 865 (2012)]. In the quest for devices with a better signal-to-noise ratio, we theoretically investigate a plasma-wave photodetector in which a dc photocurrent is generated in a graphene FET. The r…
We develop an analytical device model for graphene bilayer field-effect transistors (GBL-FETs) with the back and top gates. The model is based on the Boltzmann equation for the electron transport and the Poisson equation in the weak nonlocality approximation for the potential in the GBL-FET channel. The potential distributions in the GBL-FET channel are found analytically. The source-drain current in GBL-FETs and their transconductance are expressed in terms of the geometrical parameters and applied voltages by analytical formulas in the most important limiting cases. These formulas explicitly…
Vertical tunneling field-effect-transistor (FET) based on graphene heterojunctions with layers of hBN is simulated by self-consistent quantum transport simulations. It is found that the asymmetric p-type and n-type conduction is due to work function deference between the graphene contact and the tunneling channel material. Modulation of the bottom-graphene-contact plays an important role in determining the switching characteristic of the device. Due to the electrostatic short-channel-effects stemming from the vertical-FET structure, the output I-V characteristics do not saturate. The scaling b…
The electronic states at graphene-SiO$_2$ interface and their inhomogeneity was investigated using the back-gate-voltage dependence of local tunnel spectra acquired with a scanning tunneling microscope. The conductance spectra show two, or occasionally three, minima that evolve along the bias-voltage axis with the back gate voltage. This evolution is modeled using tip-gating and interface states. The energy dependent interface states' density, $D_{it}(E)$, required to model the back-gate evolution of the minima, is found to have significant inhomogeneity in its energy-width. A broad $D_{it}(E)…
By means of numerical simulation, we study in this work the effects of uniaxial strain on transport properties of strained graphene heterojunctions and explore the possibility to achieve good performance of graphene transistors using these hetero-channels. It is shown that a finite conduction-gap can open in the strain junctions due to the strain-induced deformation of graphene bandstructure. These hetero-channels are then demonstrated to improve significantly the operation of graphene field-effect-transistors (FETs). In particular, ON/OFF current ratio can reach a value of over 10$^5$. In gra…
This letter investigates the bias-dependent low frequency noise of single layer graphene field-effect transistors. Noise measurements have been conducted with electrolyte-gated graphene transistors covering a wide range of gate and drain bias conditions for different channel lengths. A new analytical model that accounts for the propagation of the local noise sources in the channel to the terminal currents and voltages is proposed in this paper to investigate the noise bias dependence. Carrier number and mobility fluctuations are considered as the main causes of low frequency noise and the way …
The performance limits of the multilayer graphene nanoribbon (GNR) field-effect transistor (FET) are assessed and compared to those of monolayer GNR FET and carbon nanotube (CNT) FET. The results show that with a thin high-k gate insulator and reduced interlayer coupling, multilayer GNR FET can significantly outperform its CNT counterpart with a similar gate and bandgap in terms of the ballistic on-current. In the presence of optical phonon scattering, which has a short mean free path in the graphene-derived nanostructures, the advantage of the multilayer GNRFET is even more significant. The s…
We propose an explicit small-signal graphene field-effect transistor (GFET) parameter extraction procedure based on a charge-based quasi-static model. The dependence of the small-signal parameters on both gate voltage and frequency is precisely validated by high-frequency (up to 18 GHz) on-wafer measurements from a 300 nm device. These parameters are studied simultaneously, in contrast to other works which focus exclusively on few. Efficient procedures have been applied to GFETs for the first time to remove contact and gate resistances from the Y-parameters. The use of these methods yields str…
Electron-electron interactions in graphene are sufficiently strong to induce a correlated and momentum-conserving flow such that charge carriers behave similarly to the Hagen-Poiseuille flow of a classical fluid. In the current work, we investigate the electronic signatures of such a viscous charge flow in high-mobility graphene FETs. In two complementary measurement schemes, we monitor differential resistance of graphene for different channel widths and for different effective electron temperatures. By combining both approaches, the presence of viscous effects is verified in a temperature ran…
We present an analytical device model for a field-effect transistor based on a heterostructure which consists of an array of nanoribbons clad between the highly conducting substrate (the back gate) and the top gate controlling the source-drain current. The equations of the model of a graphene nanoribbon field-effect transistor (GNR-FET) include the Poisson equation in the weak nonlocality approximation. Using this model, we find explicit analytical formulas for the spatial distributions of the electric potential along the channel and for the GNR-FET current-voltage characteristics (the depende…
We demonstrate high yield fabrication of field effect transistors (FET) using chemically reduced graphene oxide (RGO) sheets suspended in water assembled via dielectrophoresis. The two terminal resistances of the devices were improved by an order of magnitude upon mild annealing at 200 0C in Ar/H2 environment for 1 hour. With the application of a backgate voltage, all of the devices showed FET behavior with maximum hole and electron mobilities of 4.0 and 1.5 cm2/Vs respectively. This study shows promise for scaled up fabrication of graphene based nanoelectronic devices.
We consider the effect of terahertz (THz) radiation on the conductivity of the ungated and gated graphene (G)-phosphorene (P) hybrid structures and propose and evaluated the hot-carrier uncooled bolometric photodetectors based on the GP-lateral diodes (GP-LDs) and GP-field-effect transistors (GP-FETs) with the GP channel. The operation of the GP-LDs and GP-FET photodetectors is associated with the carrier heating by the incident radiation absorbed in the G-layer due to the intraband transitions. The carrier heating leads to the relocation of a significant fraction of the carriers into the P-la…
In this article, the bias-dependence of intrinsic channel thermal noise of single-layer graphene field-effect transistors (GFETs) is thoroughly investigated by experimental observations and compact modeling. The findings indicate an increase of the specific noise as drain current increases whereas a saturation trend is observed at very high carrier density regime. Besides, short-channel effects like velocity saturation also result in an increment of noise at higher electric fields. The main goal of this work is to propose a physics-based compact model that accounts for and accurately predicts …
There is a tunable band gap in ABC-stacked few-layer graphene (FLG) via applying a vertical electric field, but the operation of FLG-based field effect transistor (FET) requires two gates to create a band gap and tune channel's conductance individually. Using first principle calculations, we propose an alternative scheme to open a band gap in ABC-stacked FLG namely via single-side adsorption. The band gap is generally proportional to the charge transfer density. The capability to open a band gap of metal adsorption decreases in this order: K/Al > Cu/Ag/Au > Pt. Moreover, we find that even the …
Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show drain-current modulation of approximately 10 at 300 K, increasing to nearly 106 at 4 K. The strong temperature dependence of the minimum current indicates the opening of a bandgap for CVD-grown GNR-FETs. The extracted bandgap is estimated to be around 0.1 eV by differential conductance methods. This work highlights the development of CVD-grown large-area graphene …
We show by means of molecular dynamics simulations that graphene is an excellent coating for diamond. The transformation of diamond to amorphous carbon while sliding under pressure can be prevented by having at least two graphene layers between the diamond slabs, making this combination of materials suitable for new coatings and micro- and nanoelectromechanical devices. Grain boundaries, vacancies and adatoms on the diamond surface do not change this picture whereas reactive adsorbates between the graphene layers may have detrimental effects. Our findings can be explained by the properties of …
Graphene is considered to be a promising candidate for future nano-electronics due to its exceptional electronic properties. Unfortunately, the graphene field-effect-transistors (FETs) cannot be turned off effectively due to the absence of a bandgap, leading to an on/off current ratio typically around 5 in top-gated graphene FETs. On the other hand, theoretical investigations and optical measurements suggest that a bandgap up to a few hundred meV can be created by the perpendicular E-field in bi-layer graphenes. Although previous carrier transport measurements in bi-layer graphene transistors …
A fitting model is developed for accounting the asymmetric ambipolarities in the I-V characteristics of graphene field-effect transistors (G-FETs) with doped channels, originating from the thermionic emission and interband tunneling at the junctions between the gated and access regions. Using the model, the gate-voltage-dependent intrinsic mobility as well as other intrinsic and extrinsic device parameters can be extracted. We apply it to a top-gated G-FET with a graphene channel grown on a SiC substrate and with SiN gate dielectric that we reported previously, and we demonstrate that it can e…
Straightforward contact resistance extraction methods based on electrical device characteristics are described and applied here to graphene field-effect transistors from different technologies. The methods are an educated adaptation of extraction procedures originally developed for conventional transistors by exploiting the drift-diffusion-like transport in graphene devices under certain bias conditions. In contrast to other available approaches for contact resistance extraction of graphene transistors, the practical methods used here do not require either the fabrication of dedicated test str…
We used broad-band diamond-shape antennas, whose bandwidth could cover the frequency range between the pump laser and the scattered modes, in conjunction with uniformly deposited graphene test films.
Sub-10nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10^6 and on-state current density as high as ~2000uA/um. We estimated carrier mobility ~200cm2/Vs and scattering mean free path ~10nm in sub-10nm GNRs. Scattering mechanisms by edges, acoustic phonon and defects are discussed. The sub-10nm GNRFETs are comparable to small diameter (d<=~1.2nm) carbon nanotube FETs with Pd contacts in on-state current density and Ion/Ioff ratio, but have the advantage of produc…
In view of the appreciable semiconducting gap of 0.26 eV observed in recent experiments, epitaxial graphene on a SiC substrate seems a promising channel material for FETs. Indeed, it is two-dimensional - and therefore does not require prohibitive lithography - and exhibits a wider gap than other alternative options, such as bilayer graphene. Here we propose a model and assess the achievable performance of a nanoscale FET based on epitaxial graphene on SiC, conducting an exploration of the design parameter space. We show that the current can be modulated by 4 orders of magnitude; for digital ap…
We report on Coulomb blockade and Coulomb diamond measurements on an etched, tunable single-layer graphene quantum dot. The device consisting of a graphene island connected via two narrow graphene constrictions is fully tunable by three lateral graphene gates. Coulomb blockade resonances are observed and from Coulomb diamond measurements a charging energy of ~3.5 meV is extracted. For increasing temperatures we detect a peak broadening and a transmission increase of the nanostructured graphene barriers.
Nearly two-dimensional diamond, or diamane, is coveted as ultrathin $sp^3$-carbon film with unique mechanics and electro-optics. The very thinness ($~h$) makes it possible for the surface chemistry, e.g. adsorbed atoms, to shift the bulk phase thermodynamics in favor of diamond, from multilayer graphene. Thermodynamic theory coupled with atomistic first principles computations predicts not only the reduction of required pressure ($p/p_{\infty}>1-h_0/h$), but also the nucleation barriers, definitive for the kinetic feasibility of diamane formation. Moreover, the optimal adsorbent chair-pattern …
A general solution for the electrostatic potential in an atomic-thin-body (ATB) field-effect transistor geometry is presented. The effective electrostatic scaling length, λeff, is extracted from the analytical model, which cannot be approximated by the lowest order eigenmode as traditionally done in SOI-MOSFETs. An empirical equation for the scaling length that depends on the geometry parameters is proposed. It is shown that even for a thick SiO2 back oxide λeff can be improved efficiently by thinner top oxide thickness, and to some extent, with high-k dielectrics. The model is then applied to…
High frequency performance limits of graphene field-effect transistors (FETs) down to a channel length of 20nm are examined by using self-consistent quantum simulations. The results indicate that although Klein band-to-band tunneling is significant for sub-100nm graphene FET, it is possible to achieve a good transconductance and ballistic on-off ratio larger than 3 even at a channel length of 20nm. At a channel length of 20nm, the intrinsic cut-off frequency remains at a couple of THz for various gate insulator thickness values, but a thin gate insulator is necessary for a good transconductanc…
Atomically precise graphene nanoribbons (GNRs) are increasingly attracting interest due to their largely modifiable electronic properties, which can be tailored by controlling their width and edge structure during chemical synthesis. In recent years, the exploitation of GNR properties for electronic devices has focused on GNR integration into field-effect-transistor (FET) geometries. However, such FET devices have limited electrostatic tunability due to the presence of a single gate. Here, we report on the device integration of 9-atom wide armchair graphene nanoribbons (9-AGNRs) into a multi-g…
Graphene is considered as a promising platform for detectors of high-frequency radiation up to the terahertz (THz) range due to graphene$'$s superior electron mobility. Previously it has been shown that graphene field effect transistors (FETs) exhibit room temperature broadband photoresponse to incoming THz radiation thanks to the thermoelectric and/or plasma wave rectification. Both effects exhibit similar functional dependences on the gate voltage and therefore it was found to be difficult to disentangle these contributions in the previous studies. In this letter, we report on combined exper…
