We construct eternal mean curvature flows of tori in perturbations of the standard unit sphere $\Bbb{S}^3$. This has applications to the study of the Morse homologies of area functionals over the space of embedded tori in $\Bbb{S}^3$.
For all positive integers n we construct a 1-parameter family of conformal tori of revolution in the 3-sphere with n bulges. These tori arise by Darboux transformations of constant mean curvature tori but do not have constant mean curvature in the 3-sphere.
We consider proper-biharmonic flat tori with constant mean curvature (CMC) in spheres and find necessary and sufficient conditions for certain rectangular tori and square tori to admit full CMC proper-biharmonic immersions in $\mathbb{S}^n$, as well as the explicit expressions of some of these immersions.
We characterize Willmore tori in the 4-sphere with nontrivial normal bundle as Twistor projections of elliptic curves in complex projective space or as inverted minimal tori (with planar ends) in Euclidean 4-space.
We use bifurcation theory to show the existence of infinite sequences isometric embeddings of tori with constant mean curvature (CMC) in Euclidean spheres that are not isometrically congruent to the CMC Clifford tori, and accumulating at some CMC Clifford torus.
We present a deformation for constant mean curvature tori in the 3-sphere. We show that the moduli space of equivariant constant mean curvature tori in the 3-sphere is connected, and we classify the minimal, the embedded, and the Alexandrov embedded tori therein. We conclude with an instability result.
We show that the extrinsic diameter of immersed flat tori in the 3-sphere is $π$ under a certain topological condition for the projection of their asymptotic curves with respect to the Hopf fibration.
We compute lower bounds for the Morse index and nullity of constant mean curvature tori of revolution in the three-dimensional unit sphere. In particular, all such tori have index at least five, with index growing at least linearly with respect to the number of the surfaces' bulges, and the index of such tori can be arbitrarily large.
In this paper we study equivariant constrained Willmore tori in the 3-sphere. These tori admit a 1-parameter group of Möbius symmetries and are critical points of the Willmore energy under conformal variations. We show that the associated spectral curve of an equivariant torus is given by a double covering of $\mathbb C$ and classify equivariant constrained Willmore tori by the genus g of their spectral curve. In this case the spectral genus satisfies $g \leq 3.$
We prove that a constrained Willmore immersion of a 2-torus into the conformal 4-sphere is either of "finite type", that is, has a spectral curve of finite genus, or is of "holomorphic type" which means that it is super conformal or Euclidean minimal with planar ends. This implies that all constrained Willmore tori in the 4-sphere can be constructed rather explicitly by methods of complex algebraic geometry. The proof uses quaternionic holomorphic geometry in combination with integrable systems methods similar to those of Hitchin's approach to the study of harmonic tori in the 3-sphere.
We prove that any constant mean curvature embedded torus in the three dimensional sphere is axially symmetric, and use this to give a complete classification of such surfaces for any given value of the mean curvature.
We introduce the moduli space of spectral curves of constant mean curvature (\cmc\hspace{-5pt}) cylinders of finite type in the round unit 3-sphere. The subset of spectral curves of mean-convex Alexandrov embedded cylinders is explicitly determined using a combination of integrable systems and geometric analysis techniques. We prove that these cylinders are surfaces of revolution. As a consequence all mean-convex Alexandrov embedded {\sc{cmc}} tori in the 3-sphere are surfaces of revolution.
Constrained Willmore surfaces are critical points of the Willmore functional under conformal variations. As shown in [5] one can associate to any conformally immersed constrained Willmore torus f a compact Riemann surface Σ, such that f can be reconstructed in terms of algebraic data on Σ. Particularly interesting examples of constrained Willmore tori are the tori with constant mean curvature (CMC) in a 3-dimensional space form. It is shown in [14] and in [16] that the spectral curves of these tori are hyperelliptic. In this paper we show under mild conditions that a constrained Willmore torus…
The Clifford torus is a torus in a three-dimensional sphere. Homogeneous tori are simple generalization of the Clifford torus which still in a three-dimensional sphere. There is a way to construct tori in a three-dimensional sphere using the Hopf fibration. In this paper, all Hamiltonian stationary Lagrangian tori which is contained in a hypersphere in the complex Euclidean plane are constructed explicitly. Then it is shown that they are homogeneous tori. For the construction, flat quaternionic connections of Hamiltonian stationary Lagrangian tori are considered and a spectral curve of an asso…
In this article we study eternal solutions to the Allen-Cahn equation in the 3-sphere, in view of the connection between the gradient flow of the associated energy functional, and the mean curvature flow. We construct eternal integral Brakke flows that connect Clifford tori to equatorial spheres, and study a family of such flows, in particular their symmetry properties. Our approach is based on the realization of Brakke's motion by mean curvature as a singular limit of Allen-Cahn gradient flows, as studied by Ilmanen, and Tonegawa, and it uses the classification of ancient gradient flows in sp…
The normalized eigenvalues $Λ_i(M,g)$ of the Laplace-Beltrami operator can be considered as functionals on the space of all Riemannian metrics $g$ on a fixed surface $M$. In recent papers several explicit examples of extremal metrics were provided. These metrics are induced by minimal immersions of surfaces in $\mathbb{S}^3$ or $\mathbb{S}^4$. In the present paper a family of extremal metrics induced by minimal immersions in $\mathbb{S}^5$ is provided.
Biharmonic maps are generalizations of harmonic maps. A well-known result of Eells and Wood on harmonic maps between surfaces shows that there exists no harmonic map from a torus into a sphere (whatever the metrics chosen) in the homotopy class of maps of Brower degree $\pm 1$. It would be interesting to know if there exists any biharmonic map in that homotopy class of maps. In this paper, we obtain some classifications on biharmonic maps from a torus into a sphere, where the torus is provided with a flat or a class of non-flat metrics whilst the sphere is provided with the standard metric. Ou…
Extending work of Kapouleas and Yang, for any integers $N \geq 2$, $k, \ell \geq 1$, and $m$ sufficiently large, we apply gluing methods to construct in the round $3$-sphere a closed embedded minimal surface that has genus $k\ell m^2(N-1)+1$ and is invariant under a $D_{km} \times D_{\ell m}$ subgroup of $O(4)$, where $D_n$ is the dihedral group of order $2n$. Each such surface resembles the union of $N$ nested topological tori, all small perturbations of a single Clifford torus $\mathbb{T}$, that have been connected by $k\ell m^2 (N-1)$ small catenoidal tunnels, with $k \ell m^2$ tunnels join…
In this paper we give an explicit parametrisation of the moduli space of equivariant harmonic maps from a 2-torus to the 3-sphere. As Hitchin proved, a harmonic map of a 2-torus is described by its spectral data, which consists of a hyperelliptic curve together with a pair of differentials and a line bundle. The space of spectral data is naturally a fibre bundle over the space of spectral curves. For homogeneous tori the space of spectral curves is a disc and the bundle is trivial. For tori with a one-dimensional invariance group, we enumerate the path connected components of the space of spec…
For each integer $k \geq 2$, we apply gluing methods to construct sequences of minimal surfaces embedded in the round $3$-sphere. We produce two types of sequences, all desingularizing collections of intersecting Clifford tori. Sequences of the first type converge to a collection of $k$ Clifford tori intersecting with maximal symmetry along these two circles. Near each of the circles, after rescaling, the sequences converge smoothly on compact subsets to a Karcher-Scherk tower of order $k$. Sequences of the second type desingularize a collection of the same $k$ Clifford tori supplemented by an…
We consider generalized Hodge-Laplace operators $αd δ+ βδd$ for $α, β> 0$ on $p$-forms on compact Riemannian manifolds. In the case of flat tori and round spheres of different radii, we explicitly calculate the spectrum of these operators. Furthermore, we investigate under which circumstances they are isospectral.
This paper is devoted to the study of minimal immersions of flat $n$-tori into spheres, especially those immersed by the first eigenfunctions (such immersion is called $λ_1$-minimal immersion), which also play important roles in spectral geometry. It is known that there are only two non-congruent $λ_1$-minimal $2$-tori in spheres, which are both flat. For higher dimensional case, the Clifford $n$-torus in $\mathbb{S}^{2n-1}$ might be the only known example in the literature. In this paper, by discussing the general construction of homogeneous minimal flat $n$-tori in spheres, we construct many…
We show a non-existence result for some class of equivariant maps between sphere bundles over tori. The notion of equivariant KO-degree is used in the proof. As an application to Seiberg-Witten theory, for a connected closed oriented spin 4-manifold with indefinite intersection form, we have a new bound of the second Betti number by the signature and a non-negative integer determined by the quadruple cup product on the first cohomology group and some maps in KO-theory induced from the Albanese map.
Special class of surfaces in five-dimensional sphere in $C^3$ is considered. Immersion equations for minimal tori of that class are shown to be reducible to the equation $u_{z\bar z}=e^u-e^{-2u}$ which is integrable by means of inverse scattering method. Finite-gap minimal tori are constructed.
The Clifford tori in the 3-sphere are a one-parameter family of flat, two-dimensional, constant mean curvature (CMC) surfaces. This paper demonstrates that new, topologically non-trivial CMC surfaces resembling a pair of neighbouring Clifford tori connected at a sub-lattice consisting of at least two points by small catenoidal bridges can be constructed by perturbative PDE methods. That is, one can create an approximate solution by gluing a rescaled catenoid into the neighbourhood of each sub-lattice point; and then one can show that a perturbation of this approximate submanifold exists which …
In this work we give a new lower bound on the Morse index for constant mean curvature tori of revolution immersed in the three-sphere $\mathbb{S}^3$, by computing some explicit negative eigenvalues for the corresponding Jacobi operator.
In this paper we consider two special classes of constrained Willmore tori in the 3-sphere. The first class is given by the rotation of closed elastic curves in the upper half plane - viewed as the hyperbolic plane - around the x-axis. The second is given as the preimage of closed constrained elastic curves, i.e., elastic curve with enclosed area constraint, in the round 2-sphere under the Hopf fibration. We show that all conformal types can be isometrically immersed into S^3 as constrained Willmore (Hopf) tori and write down all constrained elastic curves in H^2 and S^2 in terms of the Weiers…
The study of minimal surfaces has a long history, due to the important applications. Given a fixed boundary, one wants to minimise the surface area: this can be used, for example, to minimise the area of the roof of a building. Similarly, looking for constant mean curvature (CMC) provides us with many interesting applications in physics: one of the easiest examples are soap bubbles. In this work however we occupy ourselves with minimal and constant mean curvature surfaces in the three-dimensional sphere $S^3$ and its dual space $Σ^3$. In Chapter 1 we give a brief overview of the tools of Riema…
Let (M,g) be a compact, connected riemannian manifold that is homogeneous, i.e. each pair of points p,q in M have isometric neighborhoods. This paper is a first step towards an understanding of the extent to which it is true that for each "generic" initial condition f0, the solution to the Heat Equation is such that for sufficiently large t, f(.,t) is a minimal Morse function, i.e., a Morse function whose total number of critical points is the minimal possible on M. In this paper we show that this is true for flat tori and round spheres in all dimensions.
For each integer m>1 and l>0 we construct a pair of compact embedded minimal surfaces of genus 1+4m(m-1)l. These surfaces desingularize the m Clifford tori meeting each other along a great circle at the angle of π/m. They are invariant under a finite group of screw motions and have no reflection symmetry across a great sphere.
We show that one-sided Alexandrov embedded constant mean curvature cylinders of finite type in the 3-sphere are surfaces of revolution. This confirms a conjecture by Pinkall and Sterling that the only embedded constant mean curvature tori in the 3-sphere are rotational.
There are not so many kinds of surface of revolution whose cut locus structure have been determined, although the cut locus structures of very familiar surfaces of revolution (in Euclidean space) such as ellipsoids, 2-sheeted hyperboloids, paraboloids, and tori are now known. Except for tori, the known cut locus structures are very simple, i.e., a single point or an arc. In this article, a new family {M_n}_n of 2-spheres of revolution with simple cut locus structure is introduced. This family is also new in the sense that the number of points on each meridian which assume a local minimum or ma…
Using Takahashi theorem we propose an approach to extend known families of minimal tori in spheres. As an example, the well-known two-parametric family of Lawson tau-surfaces including tori and Klein bottles is extended to a three-parametric family of tori and Klein bottles minimally immersed in spheres. Extremal spectral properties of the metrics on these surfaces are investigated. These metrics include i) both metrics extremal for the first non-trivial eigenvalue on the torus, i.e. the metric on the Clifford torus and the metric on the equilateral torus and ii) the metric maximal for the fir…
The quaternionic KP hierarchy is the integrable hierarchy of p.d.e obtained by replacing the complex numbers with the quaternions, mutatis mutandis, in the standard construction of the KP hierarchy equations and solutions; it is equivalent to what is often called the Davey-Stewartson II hierarchy. This article studies its relationship with the theory of quaternionic holomorphic 2-tori in HP^1 (which are equivalent to conformally immersed 2-tori in S^4). After describing how the Sato-Segal-Wilson construction of KP solutions (particularly solutions of finite type) carries over to this quaternio…
CMC surfaces in spheres are investigated under the extra condition of biharmonicity. From the work of Miyata, especially in the flat case, we give a complete description of such immersions and show that for any $h\in (0,1)$ there exist CMC proper-biharmonic planes and cylinders in $\sn^5$ with $|H|=h$, while a necessary and sufficient condition on $h$ is found for the existence of CMC proper-biharmonic tori in $\sn^5$.
A well known result of Da Rios and Levi-Civita says that a closed planar curve is elastic if and only if it is stationary under the localized induction (or smoke ring) equation, where stationary means that the evolution under the localized induction equation is by rigid motions. We prove an analogous result for surfaces: an immersion of a torus into the conformal 3-sphere has constant mean curvature with respect to a space form subgeometry if and only if it is stationary under the Davey-Stewartson flow.
We give a full classification of complete rotationally invariant surfaces with constant Gauss curvature in Berger spheres: they are either Clifford tori, which are flat, or spheres of Gauss curvature $K \geq K_0$ for a positive constant $K_0$, which we determine explicitly and depends on the geometry of the ambient Berger sphere. For values of $K_0 \leq K \leq K_P$, for a specific constant $K_P$, it was not known until now whether complete constant Gauss curvature $K$ surfaces existed in Berger spheres, so our classification provides the first examples. For $K > K_P$, we prove that the rotatio…
Minimal tori that are linearly full in the 3-sphere possess a natural invariant g called their spectral genus, which was introduced by Hitchin. We show that for each g>0, there are countably many real g-dimensional families of minimally immersed tori with spectral genus g (two of these dimensions are just reparametrisations of the torus). Each family maps from a fixed torus of rectangular conformal type.
A family of embedded rotationally symmetric tori in the Euclidean 3-space consisting of two opposite signed constant mean curvature surfaces that converge as varifolds to a double round sphere is constructed. Using complete elliptic integrals, it is shown that their Willmore energy lies strictly below $8π$. Combining such a strict inequality with previous works by Keller-Mondino-Rivière and Mondino-Scharrer allows to conclude that for every isoperimetric ratio there exists a smoothly embedded torus minimising the Willmore functional under isoperimetric constraint, thus completing the solution …
Four constructions of constant mean curvature (CMC) hypersurfaces in the (n+1)-sphere are given, which should be considered analogues of `classical' constructions that are possible for CMC hypersurfaces in Euclidean space. First, Delaunay-like hypersurfaces, consisting roughly of a chain of hyperspheres winding multiple times around an equator, are shown to exist for all values of the mean curvature. Second, a hypersurface is constructed which consists of two chains of spheres winding around a pair of orthogonal equators, showing that Delaunay-like hypersurfaces can be fused together in a symm…
This is the second in a series of papers studying the relationship between Rohlin's theorem and gauge theory. We discuss an invariant of a homology S^1 cross S^3 defined by Furuta and Ohta as an analogue of Casson's invariant for homology 3-spheres. Our main result is a calculation of the Furuta-Ohta invariant for the mapping torus of a finite-order diffeomorphism of a homology sphere. The answer is the equivariant Casson invariant (Collin-Saveliev 2001) if the action has fixed points, and a version of the Boyer-Nicas (1990) invariant if the action is free. We deduce, for finite-order mapping …