Four fundamental dimer manipulations can be used to produce a variety of localized and extended defect structures in graphene. Two-dimensional templates result in graphene allotropes, here viewed as extended defects, which can exhibit either metallic or semiconducting electrical character. \emph{Embedded allotropic ribbons}--i.e. thin swaths of the new allotropes--can also be created within graphene. We examine these ribbons and find that they maintain the electrical character of their parent allotrope even when only a few atoms in width. Such extended defects may facilitate the construction of monolithic electronic circuitry.
In this paper we introduce a new structure similar to the graphane which we call it penta graphane. This structure is obtained by adding hydrogen to penta graphene bond. We study the electronic and phononic structure of penta graphane. We firstly use with the generalized gradient approximation to compute the band structure.
In this paper, heat flux in graphene nano ribbons has been studied by using molecular dynamics simulations. It is found that the heat flux runs preferentially along the direction of decreasing width, which demonstrates significant thermal rectification effect in the asymmetric graphene ribbons. The dependence of rectification ratio on the vertex angle and the length are also discussed. Compared to the carbon nanotube based one-dimensional thermal rectifier, graphene nano ribbons have much higher rectification ratio even in large scale. Our results demonstrate that asymmetric graphene ribbon mi…
We have fabricated graphene nano-ribbon field-effect transistor devices and investigated their electrical properties as a function of ribbon width. Our experiments show that the resistivity of a ribbon increases as its width decreases, indicating the impact of edge states. Analysis of temperature dependent measurements suggests a finite quantum confinement gap opening in narrow ribbons. The electrical current noise of the graphene ribbon devices at low frequency is found to be dominated by the 1/f noise.
Zig-zag edge graphene ribbons grown on 6H-SiC facets are ballistic conductors. It has been assumed that zig-zag graphene ribbons grown on 4H-SiC would also be ballistic. However, in this work we show that SiC polytype matters; ballistic graphene ribbons only grow on 6H SiC. 4H and 4H-passivated ribbons are diffusive conductors. Detailed photoemmision and microscopy studies show that 6H-SiC sidewalls zig-zag ribbons are metallic with a pair of n-doped edge states associated with asymmetric edge terminations, In contrast, 4H-SiC zig-zag ribbons are strongly bonded to the SiC; severely distorting…
Graphene nano-ribbons junctions based electronic devices are proposed in this Letter. Non-equilibrium Green function calculations show that nano-ribbon junctions tailored from single layer graphene with different edge shape and width can act as metal-semiconductor junctions and quantum dots can be implemented. In virtue of the possibilities of patterning monolayer graphene down to atomic precision, these structures, quite different from the previously reported two-dimensional bulk graphene or carbon nanotube devices, are expected to be used as the building blocks of the future nano-electronics…
Characterized by zigzag and armchair boundaries, the narrow ribbons display the very different characteristics in Hall conductivities. It is shown that the multi-band-crossings occur in the energy spectrum for armchair ribbons, and the number of them depends on the width of ribbons. Theoretically, it is predicated that the conductivities exhibit drastic sign reversals for narrow ribbons as the Fermi energy sweep over the band-crossings. A new classification of armchair ribbons is suggested based on the emergence of a flat band in the energy spectrum only for odd armchair ribbons. The evolution…
Potentially new, single-atom thick semiconducting 2D-graphene-like material, called Anisotropic-cyclicgraphene, have been generated by the two stage searching strategy linking molecular and ab initio approach. The candidate derived from the evolutionary based algorithm and molecular simulations was then profoundly analysed using first-principles density functional theory from the structural, mechanical, phonon, and electronic properties point of view. The proposed polymorph of graphene (rP16-P1m1) is mechanically, dynamically, and thermally stable and can be semiconducting with a direct band g…
We address the electronic structure and magnetic properties of vacancies and voids both in graphene and graphene ribbons. Using a mean field Hubbard model, we study the appearance of magnetic textures associated to removing a single atom (vacancy) and multiple adjacent atoms (voids) as well as the magnetic interactions between them. A simple set of rules, based upon Lieb theorem, link the atomic structure and the spatial arrangement of the defects to the emerging magnetic order. The total spin $S$ of a given defect depends on its sublattice imbalance, but some defects with S=0 can still have l…
Flat bands form in a 3D Hopf-linked graphene crystal or a 3D carbon allotrope named Hopfene, which qualitatively differ from bands of only graphenes. This paper discusses carbon-hexagon deformation on the level shift of a flat band via density-functional-theoretical (DFT) analysis to set the flat-band level to the Fermi level, viz., to utilize its large density of states for magnetic- and electronic-property researches. Tight-binding (TB) analysis is also performed for a comparison with the DFT analysis; here, a qualitative agreement between TB and DFT bands is obtained. The DFT analysis shows…
It is shown that a graphene ribbon, a ballistic strip of carbon monolayer, may serve as a quantum wire whose electronic properties can be continuously and reversibly controlled by an externally applied transverse voltage. The electron bands of armchair-edge ribbons undergo dramatic transformations: The Fermi surface fractures, Fermi velocity and effective mass change sign, and excitation gaps are reduced by the transverse field. These effects are manifest in the conductance plateaus, van Hove singularities, thermopower, and activated transport. The control over one-dimensional bands may help e…
Since graphene nanoribbons are thin and flimsy, they need support. Support gives firm ground for applications, and adhesion holds ribbons flat, although not necessarily straight: ribbons with high aspect ratio are prone to bend. The effects of bending on ribbons' electronic properties, however, are unknown. Therefore, this article examines the electromechanics of planar and gently bent graphene nanoribbons. Simulations with density-functional tight-binding and revised periodic boundary conditions show that gentle bends in armchair ribbons can cause significant widening or narrowing of energy g…
Graphene nanoribbons (GNRs) with widths down to 16 nm have been characterized for their current-carrying capacity. It is found that GNRs exhibit an impressive breakdown current density, on the order of 10^8 A/cm2. The breakdown current density is found to have a reciprocal relationship to GNR resistivity and the data fit points to Joule heating as the likely mechanism of breakdown. The superior current-carrying capacity of GNRs will be valuable for their application in on-chip electrical interconnects. The thermal conductivity of sub-20 nm graphene ribbons is found to be more than 1000 W/m-K.
We analyze the mechanical deformations that are required to create uniform pseudomagnetic fields in graphene. It is shown that, if a ribbon is bent in-plane into a circular arc, this can lead to fields exceeding 10T, which is sufficient for the observation of pseudo-Landau quantization. The arc geometry is simpler than those suggested previously and, in our opinion, has much better chances to be realized experimentally soon. The effects of a scalar potential induced by dilatation in this geometry is shown to be negligible.
The performance of field effect transistors based on an single graphene ribbon with a constriction and a single back gate are studied with the help of atomistic models. It is shown how this scheme, unlike that of traditional carbon-nanotube-based transistors, reduces the importance of the specifics of the chemical bonding to the metallic electrodes in favor of the carbon-based part of device. The ultimate performance limits are here studied for various constriction and metal-ribbon contact models. In particular we show that, even for poorly contacting metals, properly taylored constrictions ca…
The field screening effect on the electronic and field-emission properties of zigzag graphene nanoribbons (ZGNRs) has been studied using first-principles calculations. We have systematically investigated the effect of inter-ribbon distance and ribbon width on the work function, field enhancement factor, band gap and edge magnetism of zigzag graphene nanoribbons (ZGNRs). It is found that the work function of ZGNRs increases rapidly as the inter-ribbon distance Dx increases, which is caused by the positive dipole at the edge of the ribbon. For a given Dx, the work function of ZGNRs decreases as …
We determine the stability, the geometry, the electronic and magnetic structure of hydrogen-terminated graphene-nanoribbons edges as a function of the hydrogen content of the environment by means of density functional theory. Antiferromagnetic zigzag ribbons are stable only at extremely-low ultra-vacuum pressures. Under more standard conditions, the most stable structures are the mono- and di-hydrogenated armchair edges and a zigzag edge reconstruction with one di- and two mono-hydrogenated sites. At high hydrogen-concentration ``bulk'' graphene is not stable and spontaneously breaks to form r…
Phase change memory (PCM) devices are known to reduce in power consumption as the bit volume and contact area of their electrodes are scaled down. Here, we demonstrate two types of low-power PCM devices with lateral graphene ribbon electrodes: one in which the graphene is patterned into narrow nanoribbons and the other where the phase change material is patterned into nanoribbons. The sharp graphene "edge" contacts enable switching with threshold voltages as low as ~3 V, low programming currents (<1 μA SET, <10 μA RESET) and ON/OFF ratios >100. Large-scale fabrication with graphene grown by ch…
We present Raman spectroscopy measurements of non-etched graphene nanoribbons, with widths ranging from 15 to 160 nm, where the D-line intensity is strongly dependent on the polarization direction of the incident light. The extracted edge disorder correlation length is approximately one order of magnitude larger than on previously reported graphene ribbons fabricated by reactive ion etching techniques. This suggests a more regular crystallographic orientation of the non-etched graphene ribbons here presented. We further report on the ribbons width dependence of the line-width and frequency of …
Interlayer Conductance in the Armchair Nanotube -- Zigzag Graphene Ribbon Parallel Contact: Theoretical Proposal of Detection of Wavefunction Growing from the Edge to the Center in the Graphene Ribbon
A study of the effect of unscreened Coulomb interactions on the quantum spin Hall (QSH) phase of finite-width neutral zigzag graphene ribbons is presented. By solving a tight-binding Hamiltonian that includes the intrinsic spin-orbit interaction (I-SO), exact expressions for band-structures and edge-states wavefunctions are obtained. These analytic results, supported by tight-binding calculations, show that chiral spin-filtered edge states are composed of localized and damped oscillatory wavefunctions, reminiscent of the ones obtained in armchair ribbons. The addition of long-range Coulomb int…
We study the electronic properties of electrons in flat and curved zigzag graphene ribbons using a tight-binding model within the Slater Koster approximation. We find that curvature dramatically enhances the action of spin orbit effects in graphene ribbons and has a strong effect on the spin orientation of the edge states: whereas spins are normal to the surface in the case of flat ribbons, this is no longer the case in the case of curved ribbons. We find that for the edge states, the spin density lies always in the plane perpendicular to the ribbon axis, and deviate strongly from the normal t…
Hydrogenated graphene, graphane, is studied on oxygen-terminated silicon dioxide substrate using ab initio calculations. A structure with hydrogenation only on one side of the graphene layer is found stable and its hydrogen configurations are presented. Additionally, we form zigzag graphene nanoribbons by selectively removing hydrogens from the epitaxial graphane layer. In these ribbons, the spin degeneracy of the freestanding antiferromagnetic zigzag ribbons is broken, and band gaps of different magnitude emerge for the opposite spin species. This degeneracy breaking is due to a charge imbala…
We study the electronic structure of gated graphene sheets. We consider both infinite graphene and finite width ribbons. The effect of Coulomb interactions between the electrically injected carriers and the coupling to the external gate are computed self-consistently in the Hartree approximation. We compute the average density of extra carriers, $n_{2D}$, the number of occupied subbands and the density profiles as a function of the gate potential $V_g$. We discuss quantum corrections to the classical capacitance and we calculate the threshold $V_g$ above which semiconducting armchair ribbons c…
Based on a model of the optical biosensors (Science 311, 508 (2006)) by wrapping a piece of double-stranded DNA around the surface of single-walled carbon nanotubes (SWCNT), we propose a new design model of this sensor, in which the SWCNT is replaced by a semiconductor graphene ribbon (SGR). Using a simple theory of exciton in SGRs, we investigated transition of DNA secondary structure from the native, right-handed B form to the alternate, left-handed Z form. This structural phase transition of DNA is the working principle of this optical biosensor at the sub cellular level from DNA and semico…
The tunneling current between two crossed graphene ribbons is described invoking the empirical pseudopotential approximation and the Bardeen transfer Hamiltonian method. Results indicate that the density of states is the most important factor determining the tunneling current between small (nm) ribbons. The quasi-one dimensional nature of graphene nanoribbons is shown to result in resonant tunneling.
We study by density functional and large scale tight-binding transport calculations the electronic structure, magnetism and transport properties of the recently proposed graphene ribbons with edges rolled to form nanotubes. Edges with armchair nanotubes present magnetic moments localized either in the tube or the ribbon and metallic or half-metallic character, depending on the symmetry of the junction. These properties have potential for spin valve and spin filter devices with advantages over other proposed systems. Edges with zigzag nanotubes are either metallic or semiconducting without affe…
We report on the transport properties of novel carbon nanostructures made of partially unzipped carbon nanotubes, which can be regarded as a seamless junction of a tube and a nanoribbon. We find that graphene nanoribbons act at certain energy ranges as a perfect valley filters for carbon nanotubes, with the maximum possible conductance. Our results show that a partially unzipped carbon nanotube is a magnetoresistive device, with a very large value of the magnetoresistance. We explore the properties of several structures combining nanotubes and graphene nanoribbons, demonstrating that they beha…
We investigate the formation of edge states in graphene ribbons and flakes with proximity induced valley-Zeeman and Rashba spin-orbit couplings in the presence of a perpendicular magnetic field $B$. Two types of edges states appear in the spin-orbit gap at the Fermi level at zero field: strongly localized pseudohelical (intervalley) states and weakly localized intravalley states. We show that if the magnetic field is stronger than a crossover field $B_c$, which is a few mT for realistic systems such as graphene/WSe$_2$, only the pseudohelical edge states remain in zigzag graphene ribbons; the …
MoS$_2$, a member of transition metal dichalcogenides (TMDs), recently emerged as one of the fastest growing two-dimensional materials due to its fascinating mechanical, thermal, electronic and optical properties. Unlike graphene which possesses massless Dirac fermions with ultra-high electron mobility, monolayer MoS$_2$ is a direct band gap semiconductor. An interesting question arises: Can monolayer MoS$_2$ also possess massless Dirac fermions with ultra-high electron mobility? Here, using first-principles calculations, we show that a monolayer MoS$_2$ allotrope, which consists of repeated s…
Based on atomistic simulations, the nonlinear elastic properties of monolayer graphene nanoribbons under quasistatic uniaxial tension are predicted, emphasizing the effect of edge structures (armchair and zigzag, without and with hydrogen passivation). The results of atomistic simulations are interpreted within a theoretical framework of thermodynamics, which enables determination of the nonlinear functions for the strain-dependent edge energy and the hydrogen adsorption energy, for both zigzag and armchair edges. Due to the edge effects, the initial Young's modulus of graphene nanoribbons und…
Electron fully spin-polarized edge states in graphene emerged at the interfaces of a nonuniform magnetic field are studied numerically in a tight-binding model, with both the orbital and Zeeman-splitting effects of magnetic field considered. We show that the fully spin-polarized currents can be manipulated by a gate voltage. In order to make use of the fully spin-polarized currents in the spin related transport, a three-terminal experiment is designed and expected to export the fully spin-polarized currents. This may have important applications in spin based nanodevices.
Bulk modes (BM) are basis solutions to the Schrödinger equation and they are useful in a number of physical problems. In the present work, we establish a complete set of BMs for graphene ribbons at arbitrary energy. We derive analytical expressions for these modes and systematically classify them into propagating or evanescent mode. We also demonstrate their uses in efficient electronic transport simulations of graphene-based electronic devices within both the mode-matching method and the Green's function framework. Explicit constructions of Green's functions for infinite and semi-infinite gra…
Graphene has many advantageous properties, but its lack of an electronic band gap makes this two dimensional material impractical for many nanoelectronic applications, for example field effect transistors. This problem can be circumvented by opening up a confinement induced gap, through the patterning of graphene into ribbons having widths of a few nanometres. The electronic properties of such ribbons depend on their size and the crystallographic orientation of the ribbon edges. Therefore, etching processes that are able to differentiate between the zigzag and armchair type edge terminations o…
Explicit expressions of the band spectrum near the neutrality point for armchair and zigzag graphene ribbons and carbon nanotubes were derived based on a tight-binding macromolecule model of graphene. The obtained dispersion relations are used to determine and compare the conductance ladders of these structures and are beneficial for many other applications. Our results are different in many respects from previously reported data. This new information forms a solid reliable basis for evaluation of the potential of graphene nanoelectronic devices.
As the three-dimensional analogs of graphene, Weyl semimetals display signatures of chiral anomaly which arises from charge pumping between the lowest chiral Landau levels of the Weyl nodes in the presence of parallel electric and magnetic fields. In this work, we study the pseudo chiral anomaly and its transport signatures in graphene ribbon with zigzag edges. Here "pseudo" refers to the case where the inverse of width of zigzag graphene ribbon plays the same role as magnetic field in three-dimensional Weyl semimetals. The valley chiral bands in zigzag graphene ribbons can be introduced by ed…
Zigzag edges of neutral armchair-oriented Graphene Nano-Ribbons show states strongly localized at those edges. They behave as free radicals that can capture electrons during processing, increasing ribbon's stability. Thus, charging and its consequences should be investigated.Total energy calculations of finite ribbons using spin polarized Density Functional Theory (DFT) show that ribbon's charging is feasible. Energies for Pariser-Parr-Pople (PPP) model Hamiltonian are compatible with DFT allowing the study of larger systems. Results for neutral ribbons indicate: i) the fundamental gap of spin…
Quantum spin Hall insulator/metal interfaces are formed in graphene ribbons with intrinsic spin-orbit coupling by selectively doping two regions creating a potential step. For a clean graphene ribbon, the transmission of the topological edge states through a n-n or p-p junction is perfect irrespective of the ribbon termination, width, and potential step parameters due to the orthogonality of incoming and outgoing edge channels. This is shown numerically for an arbitrary crystallographic orientation of the ribbon and proven analytically for zigzag and metallic armchair boundary conditions. In d…
In inhomogeneously strained graphene, low-energy electrons experience a valley-antisymmetric pseudo-magnetic field which leads to the formation of localized states at the edge between the valence and conduction bands, understood in terms of peculiar n=0 pseudo-magnetic Landau levels. Here we show that such states can manifest themselves as an isolated quadruplet of low-energy conductance resonances in a suspended stretched graphene ribbon, where clamping by the metallic contacts results in a strong inhomogeneity of strain near the ribbon ends.
We present numerical studies of conduction in graphene nanoribbons with different types of disorder. We find that even when defect scattering depresses the conductance to values two orders of magnitude lower than 2e^2/h, equally spaced conductance plateaus occur at moderately low temperatures due to enhanced electron backscattering near subband edge energies if bulk vacancies are present in the ribbon. This work accounts quantitatively for the surprising conductance quantization observed by Lin et al. [Phys. Rev. B 78, 161409 (2008)] in ribbons with such low conductances.
We present numerical studies of non-linear conduction in graphene nanoribbons when a bias potential is applied between the source and drain electrodes. We find that the conductance quantization plateaus show asymmetry between the electron and hole branches if the potential in the ribbon equals the source or drain electrode potential and strong electron (hole) scattering occurs. The scattering may be at the ends of a uniform ballistic ribbon connecting wider regions of graphene or may be due to defects in the ribbon. We argue that, in ribbons with strong defect scattering, the ribbon potential …
We theoretically investigate effect of a transverse electric field generated by side gates and a vertical electric field generated by top, back gates on energy bands and transport properties of zigzag bilayer graphene ribbons (Bernal stacking). Using atomistic Tight Binding calculations and Green function formalism we demonstrate that bandgap is opened when either field is applied and even enlarged under simultaneous influence of the two fields. Interestingly, although vertical electric fields are widely used to control bandgap in bilayer graphene, here we show that transverse fields exhibit m…
We study the transport properties of graphene nanoribbons of standardized 30 nm width and varying lengths. We find that the extent of the gap observed in transport as a function of Fermi energy in these ribbons (the "transport gap") does not have a strong dependence on ribbon length, while the extent of the gap as a function of source-drain voltage (the "source-drain gap") increases with increasing ribbon length. We anneal the ribbons to reduce the amplitude of the disorder potential, and find that the transport gap both shrinks and moves closer to zero gate voltage. In contrast, annealing doe…
We investigated the thermal conductivity K of graphene ribbons and graphite slabs as the function of their lateral dimensions. Our theoretical model considered the anharmonic three-phonon processes to the second-order and included the angle-dependent phonon scattering from the ribbon edges. It was found that the long mean free path of the long-wavelength acoustic phonons in graphene can lead to an unusual non-monotonic dependence of the thermal conductivity on the length L of a ribbon. The effect is pronounced for the ribbons with the smooth edges (specularity parameter p>0.5). Our results als…
Atomistic simulations are used to study the bending of rectangular graphene nano ribbons subjected to axial stress both for free boundary and supported boundary conditions. The shape of the deformations of the buckled graphene nano ribbons, for small values of the stress, are sine waves where the number of nodal lines depend on the longitudinal size of the system and the applied boundary condition. The buckling strain for the supported boundary condition is found to be independent of the longitudinal size and estimated to be 0.86$%$. From a calculation of the free energy at finite temperature …
Stone-Wales (SW) defects, analogous to dislocations in crystals, play an important role in mechanical behavior of $sp^2$-bonded carbon based materials. Here, we show using first-principles calculations that a marked anisotropy in the interaction among the SW defects has interesting consequences when such defects are present near the edges of a graphene nano-ribbon: depending on their orientation with respect to edge, they result in compressive or tensile stress, and the former is responsible to depression or warping of the graphene nano-ribbon. Such warping results in delocalization of electro…
We investigate the effects of external electric fields on the electronic properties of bilayer armchair graphene nano-ribbons. Using atomistic simulations with Tight Binding calculations and the Non-equilibrium Green function formalism, we demonstrate that (i) in semi-metallic structures, vertical fields impact more effectively than transverse fields in terms of opening larger bandgap, showing a contrary phenomenon compared to that demonstrated in previous studies in bilayer zigzag graphene nano-ribbons; (ii) in some semiconducting structures, if transverse fields just show usual effects as in…
On the basis of first principles calculations, we report energy estimated to cut a graphene sheet into nanoribbons of armchair and zigzag configurations. Our calculations show that the energy required to cut a graphene sheet into zigzag configuration is higher than that of armchair configuration by an order of 0.174 eV. Thus, a control over the threshold energy might be helpful in designing an experiment for cutting a graphene sheet into smooth edged armchair or zigzag configurations.
It is now possible to produce graphene nanoribbons (GNRs) with atomically defined widths. GNRs offer many opportunities for electronic devices and composites, if it is possible to establish the link between edge structure and functionalisation, and resultant GNR properties. Switching hydrogen edge termination to larger more complex functional groups such as hydroxyls or thiols induces strain at the ribbon edge. However we show that this strain is then relieved via the formation of static out-of-plane ripples. The resultant ribbons have a significantly reduced Young's Modulus which varies as a …
Magnetic graphene-ribbon is a candidate for realizing future ultra high density 100 tera bit/inch2 class data storage media. Multiple spin state analysis was done based on the density function theory. A typical model was a super cell [C80H7] which having bare (radical) carbons on one side zigzag edge, whereas mono hydrogenated on another side. Optimizing atomic configuration, self consistent calculation demonstrated that a total energy of the highest spin state is more stable than that of lower one, which came from exchange coupling between carbons. This analysis suggested a capability of desi…
The list of textbook tunneling formulas is extended by deriving exact expressions for the transmission coefficient in graphene ribbons with armchair edges and the step-like and barrier-like profiles of site energies along the ribbon. These expressions are obtained by matching wave functions at the interfaces between the regions, where quasiparticles have constant but different potential energies. It is shown that for an $U_0$ high barrier and low-energy electrons and holes, the mode transmission of charge carriers in this type of ribbons is described by the textbook formula, where the constant…
Quantum dynamics and kinetics of electrically gated graphene ribbons with lateral n-p and e-n-p junctions under magnetic field are investigated. It is shown that the snake-like states of quasiparticles skipping along the n-p interface do not manifest themselve in the main semiclassical part of the ribbon conductance. Giant oscillations of the conductance of a ribbon with an n-p-n junction are predicted and analytically calculated. Depending on the number of junctions inside the ribbon its magnetoresistance may be controllably changed by 50% - 90% by an extremely small change of the magnetic fi…
We investigate the shot noise of an impurity-free graphene flake as a function of the chemical potential. For large width to length ratios, this noise has been predicted and observed to exhibit universal characteristics at the Dirac point. Furthermore, a sharp decrease of the shot noise with increasing carrier density has been predicted. This decrease has also been observed in experiments, but with much smaller slope than predicted. We reconcile this discrepancy between theory and experiment by including the effects of the contacts to the graphene ribbon.
An active plasmonic switch based on single- and few-layer doped graphene ribbon array operating in the mid-infrared spectrum is investigated with theoretical and numerical calculations. It is shown that significant resonance wavelength shifts and modulation depths can be achieved with a slight variation of the doping concentration of the graphene ribbon. The few-layer graphene ribbon array device outperforms the single-layer one in terms of the achievable modulation depth. Our simulations reveal that, by modulating the Fermi-energy level between 0.2 eV and 0.25 eV, a four-layer graphene ribbon…
We combine density-functional theory and the nonequilibrium Green's function method to study the thermal conductance of graphene nanoribbons with armchair and zigzag edges. Zigzag ribbons have higher thermal conductance than armchair ribbons of comparable widths due to an anisotropy in phonon dispersion for graphene nanoribbons: low-frequency bands in zigzag ribbons are more dispersive than those in armchair ribbons. The edges with and without hydrogen-passivation modify the atomic structure and ultimately influence the phonon thermal transport differently for the two ribbon types.
Two types of graphene nanoribbons: (a) potassium-split graphene nanoribbons (GNRs), and (b) oxidative unzipped and chemically converted graphene nanoribbons (CCGNRs) were investigated for their magnetic properties using the combination of static magnetization and electron spin resonance measurements. The two types of ribbons possess remarkably different magnetic properties. While the low temperature ferromagnet-like feature is observed in both types of ribbons, such room temperature feature persists only in potassium-split ribbons. The GNRs show negative exchange bias, but the CCGNRs exhibit a…
We demonstrate theoretically the feasibility of selective self-excitation of higher-mode flexural vibrations of graphene nano-ribbons and carbon nanotubes by the means of magnetomotive instability. Apart from the mechanical resonator, the device consists only of a constant voltage source, an inductor, a capacitor, a gate electrode and a constant magnetic field. Numerical simluations were performed on both graphene and carbon nanotubes displaying an overall similar behaviour, but with some differences arising mainly due to the non-linear mechanical bending forces. The advantages and disadvantag…
