A class of doubly-generalized low-density parity-check (D-GLDPC) codes, where single parity-check (SPC) codes are used as variable nodes (VNs), is investigated. An expression for the growth rate of the weight distribution of any D-GLDPC ensemble with a uniform check node (CN) set is presented at first, together with an analytical technique for its efficient evaluation. These tools are then used for detailed analysis of a case study, namely, a rate-1/2 D-GLDPC ensemble where all the CNs are (7,4) Hamming codes and all the VNs are length-7 SPC codes. It is illustrated how the VN representations can heavily affect the code properties and how different VN representations can be combined within the same graph to enhance some of the code parameters. The analysis is conducted over the binary erasure channel. Interesting features of the new codes include the capability of achieving a good compromise between waterfall and error floor performance while preserving graphical regularity, and values of threshold outperforming LDPC counterparts.
The growth rate of the weight distribution of irregular doubly-generalized LDPC (D-GLDPC) codes is developed and in the process, a new efficient numerical technique for its evaluation is presented. The solution involves simultaneous solution of a 4 x 4 system of polynomial equations. This represents the first efficient numerical technique for exact evaluation of the growth rate, even for LDPC codes. The technique is applied to two example D-GLDPC code ensembles.
In this paper, an expression for the asymptotic growth rate of the number of small linear-weight codewords of irregular doubly-generalized LDPC (D-GLDPC) codes is derived. The expression is compact and generalizes existing results for LDPC and generalized LDPC (GLDPC) codes. Assuming that there exist check and variable nodes with minimum distance 2, it is shown that the growth rate depends only on these nodes. An important connection between this new result and the stability condition of D-GLDPC codes over the BEC is highlighted. Such a connection, previously observed for LDPC and GLDPC codes,…
In this paper, the stability condition for low-density parity-check (LDPC) codes on the binary erasure channel (BEC) is extended to generalized LDPC (GLDPC) codes and doublygeneralized LDPC (D-GLDPC) codes. It is proved that, in both cases, the stability condition only involves the component codes with minimum distance 2. The stability condition for GLDPC codes is always expressed as an upper bound to the decoding threshold. This is not possible for D-GLDPC codes, unless all the generalized variable nodes have minimum distance at least 3. Furthermore, a condition called derivative matching is …
This paper analyzes the asymptotic exponent of the weight spectrum for irregular doubly-generalized LDPC (D-GLDPC) codes. In the process, an efficient numerical technique for its evaluation is presented, involving the solution of a 4 x 4 system of polynomial equations. The expression is consistent with previous results, including the case where the normalized weight or stopping set size tends to zero. The spectral shape is shown to admit a particularly simple form in the special case where all variable nodes are repetition codes of the same degree, a case which includes Tanner codes; for this …
The iterative decoding threshold of low-density parity-check (LDPC) codes over the binary erasure channel (BEC) fulfills an upper bound depending only on the variable and check nodes with minimum distance 2. This bound is a consequence of the stability condition, and is here referred to as stability bound. In this paper, a stability bound over the BEC is developed for doubly-generalized LDPC codes, where the variable and the check nodes can be generic linear block codes, assuming maximum a posteriori erasure correction at each node. It is proved that in this generalized context as well the bou…
In this paper, an expression for the asymptotic growth rate of the number of small linear-weight codewords of irregular doubly-generalized LDPC (D-GLDPC) codes is derived. The expression is compact and generalizes existing results for LDPC and generalized LDPC (GLDPC) codes. Ensembles with check or variable node minimum distance greater than 2 are shown to be have good growth rate behavior, while for other ensembles a fundamental parameter is identified which discriminates between an asymptotically small and an asymptotically large expected number of small linear-weight codewords. Also, in the…
Using the EXIT chart approach, a necessary and sufficient condition is developed for the local stability of iterative decoding of multi-edge type (MET) doubly-generalized low-density parity-check (D-GLDPC) code ensembles. In such code ensembles, the use of arbitrary linear block codes as component codes is combined with the further design of local Tanner graph connectivity through the use of multiple edge types. The stability condition for these code ensembles is shown to be succinctly described in terms of the value of the spectral radius of an appropriately defined polynomial matrix.
An algorithm for constructing parity-check matrices of non-binary quasi-cyclic low-density parity-check (NB QC-LDPC) codes is proposed. The algorithm finds short cycles in the base matrix and tries to eliminate them by selecting the circulants and the elements of GF(q). Firstly the algorithm tries to eliminate the cycles with the smallest number edges going outside the cycle. The efficiency of the algorithm is demonstrated by means of simulations. In particular, it was shown that NB QC-LDPC codes constructed with use of our algorithm loose less that 0.1 dB in comparison to the best NB LDPC cod…
Irregular repeat-accumulate Root-Check LDPC codes based on Progressive Edge Growth (PEG) techniques for block-fading channels are proposed. The proposed Root-Check LDPC codes are {both suitable for channels under $F = 2, 3$ independent fadings per codeword and} for fast fading channels. An IRA(A) Root-Check structure is devised for $F = 2, 3$ independent fadings. The performance of the new codes is investigated in terms of the Frame Error Rate (FER). Numerical results show that the IRAA LDPC codes constructed by the proposed algorithm {outperform by about 1dB the existing} IRA Root-Check LDPC …
For improving coarsely quantized decoding of LDPC codes, we propose a check node aware design of the variable node update. In contrast to previous works, we optimize the variable node to explicitly maximize the mutual information preserved in the check-to-variable instead of the variable-to-check node messages. The extended optimization leads to a significantly different solution for the compression operation at the variable node. Simulation results for regular LDPC codes confirm that the check node aware design, especially for very coarse quantization with 2- or 3-bit messages, achieves perfo…
This paper basically expresses the core fundamentals and brief overview of the research of R. G. GALLAGER [1] on Low-Density Parity-Check (LDPC) codes and various parameters related to LDPC codes like, encoding and decoding of LDPC codes, code rate, parity check matrix, tanner graph. We also discuss advantages and applications as well as the usage of LDPC codes in 5G technology. We have simulated encoding and decoding of LDPC codes and have acquired results in terms of BER vs SNR graph in MATLAB software. This report was submitted as an assignment in Nirma University
This paper is concerned with construction and structural analysis of both cyclic and quasi-cyclic codes, particularly LDPC codes. It consists of three parts. The first part shows that a cyclic code given by a parity-check matrix in circulant form can be decomposed into descendant cyclic and quasi-cyclic codes of various lengths and rates. Some fundamental structural properties of these descendant codes are developed, including the characterizations of the roots of the generator polynomial of a cyclic descendant code. The second part of the paper shows that cyclic and quasi-cyclic descendant LD…
Low decoding latency and complexity are two important requirements of channel codes used in many applications, like machine-to-machine communications. In this paper, we show how these requirements can be fulfilled by using some special quasi-cyclic low-density parity-check block codes and spatially coupled low-density parity-check convolutional codes that we denote as compact. They are defined by parity-check matrices designed according to a recent approach based on sequentially multiplied columns. This method allows obtaining codes with girth up to 12. Many numerical examples of practical cod…
This paper presents a design technique for obtaining regular time-invariant low-density parity-check convolutional (RTI-LDPCC) codes with low complexity and good performance. We start from previous approaches which unwrap a low-density parity-check (LDPC) block code into an RTI-LDPCC code, and we obtain a new method to design RTI-LDPCC codes with better performance and shorter constraint length. Differently from previous techniques, we start the design from an array LDPC block code. We show that, for codes with high rate, a performance gain and a reduction in the constraint length are achieved…
The peeling decoding for spatially coupled low-density parity-check (SC-LDPC) codes is analyzed for a binary erasure channel. An analytical calculation of the mean evolution of degree-one check nodes of protograph-based SC-LDPC codes is given and an estimate for the covariance evolution of degree-one check nodes is proposed in the stable decoding phase where the decoding wave propagates along the chain of coupled codes. Both results are verified numerically. Protograph-based SC-LDPC codes turn out to have a more robust behavior than unstructured random SC-LDPC codes. Using the analytically cal…
LDPC codes based on multiple-edge protographs potentially have larger minimum distances compared to their counterparts, single-edge protographs. However, considering different features of their Tanner graph, such as short cycles, girth and other graphical structures, is harder than for Tanner graphs from single-edge protographs. In this paper, we provide a novel approach to construct the parity-check matrix of an LDPC code which is based on trades obtained from block designs. We employ our method to construct two important categories of LDPC codes; quasi-cyclic (QC) LDPC and spatially-coupled …
Partial decoding has the potential to achieve a larger capacity region than full decoding in two-way relay (TWR) channels. Existing partial decoding realizations are however designed for Gaussian channels and with a static physical layer network coding (PLNC). In this paper, we propose a new solution for joint network coding and channel decoding at the relay, called pairwise check decoding (PCD), for low-density parity-check (LDPC) coded TWR system over block fading channels. The main idea is to form a check relationship table (check-relation-tab) for the superimposed LDPC coded packet pair in…
Protograph low-density-parity-check (LDPC) are considered to design near-capacity low-rate codes over the binary erasure channel (BEC) and binary additive white Gaussian noise (BIAWGN) channel. For protographs with degree-one variable nodes and doubly-generalized LDPC (DGLDPC) codes, conditions are derived to ensure equality of bit-error threshold and block-error threshold. Using this condition, low-rate codes with block-error threshold close to capacity are designed and shown to have better error rate performance than other existing codes.
We propose a low-complexity method to find quasi-cyclic low-density parity-check block codes with girth 10 or 12 and shorter length than those designed through classical approaches. The method is extended to time-invariant spatially coupled low-density parity-check convolutional codes, permitting to achieve small syndrome former constraint lengths. Several numerical examples are given to show its effectiveness.
A novel method guaranteeing nondecreasing girth is presented for constructing longer low-density parity-check (LDPC) codes from shorter ones. The parity-check matrix of a shorter base code is decomposed into N (N>=2) non-overlapping components with the same size. Then, these components are combined together to form the parity-check matrix of a longer code, according to a given N*N Latin square. To illustrate this method, longer quasi-cyclic (QC) LDPC codes are obtained with girth at least eight and satisfactory performance, via shorter QC-LDPC codes with girth eight but poor performance. The p…
In this paper, we deal with time-invariant spatially coupled low-density parity-check convolutional codes (SC-LDPC-CCs). Classic design approaches usually start from quasi-cyclic low-density parity-check (QC-LDPC) block codes and exploit suitable unwrapping procedures to obtain SC-LDPC-CCs. We show that the direct design of the SC-LDPC-CCs syndrome former matrix or, equivalently, the symbolic parity-check matrix, leads to codes with smaller syndrome former constraint lengths with respect to the best solutions available in the literature. We provide theoretical lower bounds on the syndrome form…
The connections between variable nodes and check nodes have a great influence on the performance of low-density parity-check (LDPC) codes. Inspired by the unique structure of polar code's generator matrix, we proposed a new method of constructing LDPC codes that achieves a polarization effect. The new code, named as polarized LDPC codes, is shown to achieve lower or no error floor in the binary symmetric channel (BSC)
In this letter, we propose a reliability-based windowed decoding scheme for spatially-coupled (SC) low-density parity-check (LDPC) codes. To mitigate the error propagation along the sliding windowed decoder of the SC LDPC codes, a partial message reservation (PMR) method is proposed where only the reliable messages generated in the previous decoding window are reserved for the next decoding window. We also propose a partial syndrome check (PSC) stopping rule for each decoding window, in which only the complete VNs are checked. Simulation results show that our proposed scheme significantly impr…
In this paper we propose the construction of Spatially Coupled Low-Density Parity-Check (SC-LDPC) codes using a periodic time-variant Quasi-Cyclic (QC) algorithm. The QC based approach is optimized to obtain memory efficiency in storing the parity-check matrix in the decoders. A hardware model of the parity-check storage units has been designed for Xilinx FPGA to compare the logic and memory requirements for various approaches. It is shown that the proposed QC SC-LDPC code (with optimization) can be stored with reasonable logic resources and without the need of block memory in the FPGA. In add…
We present a method for estimating the undetected error rate when a cyclic redundancy check (CRC) is performed on the output of the decoder of short low-density parity-check (LDPC) codes. This system is of interest for telecommand links, where new LDPC codes have been designed for updating the current standard. We show that these new LDPC codes combined with CRC are adequate for complying with the stringent requirements of this kind of transmissions in terms of error detection.
For a high-rate case, it is difficult to randomly construct good low-density parity-check (LDPC) codes of short and moderate lengths because their Tanner graphs are prone to making short cycles. Also, the existing high-rate quasi-cyclic (QC) LDPC codes can be constructed only for very restricted code parameters. In this paper, a new construction method of high-rate regular QC LDPC codes with parity-check matrices consisting of a single row of circulants with the column-weight 3 or 4 is proposed based on special classes of cyclic difference families. The proposed QC LDPC codes can be constructe…
The concept and existence of sphere-bound-achieving and capacity-achieving lattices has been explained on AWGN channels by Forney. LDPC lattices, introduced by Sadeghi, perform very well under iterative decoding algorithm. In this work, we focus on an ensemble of regular LDPC lattices. We produce and investigate an ensemble of LDPC lattices with known properties. It is shown that these lattices are sphere-bound-achieving and capacity-achieving. As byproducts we find the minimum distance, coding gain, kissing number and an upper bound for probability of error for this special ensemble of regula…
The main goal of coding theory is to devise efficient systems to exploit the full capacity of a communication channel, thus achieving an arbitrarily small error probability. Low Density Parity Check (LDPC) codes are a family of block codes--characterised by admitting a sparse parity check matrix--with good correction capabilities. In the present paper the orbits of subspaces of a finite projective space under the action of a Singer cycle are investigated.
Low-density parity-check (LDPC) codes are one of the most promising families of codes to replace the Goppa codes originally used in the McEliece cryptosystem. In fact, it has been shown that by using quasi-cyclic low-density parity-check (QC-LDPC) codes in this system, drastic reductions in the public key size can be achieved, while maintaining fixed security levels. Recently, some proposals have appeared in the literature using codes with denser parity-check matrices, named moderate-density parity-check (MDPC) codes. However, the density of the parity-check matrices to be used in QC-LDPC code…
The relation between parity-check matrices of quasi-cyclic (QC) low-density parity-check (LDPC) codes and biadjacency matrices of bipartite graphs supports searching for powerful LDPC block codes. Using the principle of tailbiting, compact representations of bipartite graphs based on convolutional codes can be found. Bounds on the girth and the minimum distance of LDPC block codes constructed in such a way are discussed. Algorithms for searching iteratively for LDPC block codes with large girth and for determining their minimum distance are presented. Constructions based on all-ones matrices, …
In this paper, we focus on decoding nonbinary low-density parity-check (LDPC) codes in Galois fields of characteristic two via the proximal alternating direction method of multipliers (proximal-ADMM). By exploiting Flanagan/Constant-Weighting embedding techniques and the decomposition technique based on three-variables parity-check equations, two efficient proximal-ADMM decoders for nonbinary LDPC codes are proposed. We show that both of them are theoretically guaranteed convergent to some stationary point of the decoding model and either of their computational complexities in each proximal-AD…
We derive a new fast convergent Density Evolution algorithm for finding optimal rate Low-Density Parity-Check (LDPC) codes used over the binary erasure channel (BEC). The fast convergence property comes from the modified Density Evolution (DE), a numerical method for analyzing the behavior of iterative decoding convergence of a LDPC code. We have used the method of [16] for designing of a LDPC code with optimal rate. This has been done for a given parity check node degree distribution, erasure probability and specified DE constraint. The fast behavior of DE and found optimal rate with this met…
Density evolution (DE) is one of the most powerful analytical tools for low-density parity-check (LDPC) codes on memoryless binary-input/symmetric-output channels. The case of non-symmetric channels is tackled either by the LDPC coset code ensemble (a channel symmetrizing argument) or by the generalized DE for linear codes on non-symmetric channels. Existing simulations show that the bit error rate performances of these two different approaches are nearly identical. This paper explains this phenomenon by proving that as the minimum check node degree $d_c$ becomes sufficiently large, the perfor…
In his thesis, Wiberg showed the existence of thresholds for families of regular low-density parity-check codes under min-sum algorithm decoding. He also derived analytic bounds on these thresholds. In this paper, we formulate similar results for linear programming decoding of regular low-density parity-check codes.
Low-density parity-check (LDPC) codes on symmetric memoryless channels have been analyzed using statistical physics by several authors. In this paper, statistical mechanical analysis of LDPC codes is performed for asymmetric memoryless channels and general Markov channels. It is shown that the saddle point equations of the replica symmetric solution for a Markov channel is equivalent to the density evolution of the belief propagation on the factor graph representing LDPC codes on the Markov channel. The derivation uses the method of types for Markov chain.
This paper presents a scheme named code hopping (CodeHop) for gaussian wiretap channels based on nonsystematic low-density parity-check (LDPC) codes. Different from traditional communications, in the CodeHop scheme, the legitimate receiver (Bob) rapidly switches the parity-check matrix upon each correctly received source message block. Given an authenticated public feedback channel, the transmitter's (Alice) parity-check matrix can also be synchronized with the receiver's. As a result, once an eavesdropper (Eve) erroneously decodes a message block, she may not be able to follow the update of s…
In this paper, we consider how to partition the parity-check matrices (PCMs) to reduce the hardware complexity and computation delay for the row layered decoding of quasi-cyclic low-density parity-check (QC-LDPC) codes. First, we formulate the PCM partitioning as an optimization problem, which targets to minimize the maximum column weight of each layer while maintaining a block cyclic shift property among different layers. As a result, we derive all the feasible solutions for the problem and propose a tight lower bound $ω_{LB}$ on the minimum possible maximum column weight to evaluate a soluti…
An irregular LDGM-LDPC code is studied as a sub-code of an LDPC code with some randomly \emph{punctured} output-bits. It is shown that the LDGM-LDPC codes achieve rates arbitrarily close to the channel-capacity of the binary-input symmetric-output memoryless (BISOM) channel with bounded \emph{complexity}. The measure of complexity is the average-degree (per information-bit) of the check-nodes for the factor-graph of the code. A lower-bound on the average degree of the check-nodes of the irregular LDGM-LDPC codes is obtained. The bound does not depend on the decoder used at the receiver. The st…
We face the following dilemma for designing low-density parity-check codes (LDPC) for quantum error correction. 1) The row weights of parity-check should be large: The minimum distances are bounded above by the minimum row weights of parity-check matrices of constituent classical codes. Small minimum distance tends to result in poor decoding performance at the error-floor region. 2) The row weights of parity-check matrices should not be large: The sum-product decoding performance at the water-fall region is degraded as the row weight increases. Recently, Kudekar et al. showed spatially-coupled…
We derive bounds on the asymptotic density of parity-check matrices and the achievable rates of binary linear block codes transmitted over memoryless binary-input output-symmetric (MBIOS) channels. The lower bounds on the density of arbitrary parity-check matrices are expressed in terms of the gap between the rate of these codes for which reliable communication is achievable and the channel capacity, and the bounds are valid for every sequence of binary linear block codes. These bounds address the question, previously considered by Sason and Urbanke, of how sparse can parity-check matrices of …
In this paper, a simple, general-purpose and effective tool for the design of low-density parity-check (LDPC) codes for iterative correction of bursts of erasures is presented. The design method consists in starting from the parity-check matrix of an LDPC code and developing an optimized parity-check matrix, with the same performance on the memory-less erasure channel, and suitable also for the iterative correction of single bursts of erasures. The parity-check matrix optimization is performed by an algorithm called pivot searching and swapping (PSS) algorithm, which executes permutations of c…
A generalized low-density parity-check (GLDPC) code is a class of codes, where single parity check nodes in a conventional low-density parity-check (LDPC) code are replaced by linear codes with higher parity check constraints. In this paper, we introduce a new method of constructing GLDPC codes by inserting the generalized check nodes for partial doping. While the conventional protograph GLDPC code dopes the protograph check nodes by replacing them with the generalized check nodes, a new GLDPC code is constructed by adding the generalized check nodes and partially doping the selected variable …
The paper introduces new bounds on the asymptotic density of parity-check matrices and the achievable rates under ML decoding of binary linear block codes transmitted over memoryless binary-input output-symmetric channels. The lower bounds on the parity-check density are expressed in terms of the gap between the channel capacity and the rate of the codes for which reliable communication is achievable, and are valid for every sequence of binary linear block codes. The bounds address the question, previously considered by Sason and Urbanke, of how sparse can parity-check matrices of binary linea…
In this paper, a family of low-density parity-check (LDPC) degree distributions, whose decoding threshold on the binary erasure channel (BEC) admits a simple closed form, is presented. These degree distributions are a subset of the check regular distributions (i.e. all the check nodes have the same degree), and are referred to as $p$-positive distributions. It is given proof that the threshold for a $p$-positive distribution is simply expressed by $[λ'(0)ρ'(1)]^{-1}$. Besides this closed form threshold expression, the $p$-positive distributions exhibit three additional properties. First, for g…
Recent works showed how low-density parity-check (LDPC) erasure correcting codes, under maximum likelihood (ML) decoding, are capable of tightly approaching the performance of an ideal maximum-distance-separable code on the binary erasure channel. Such result is achievable down to low error rates, even for small and moderate block sizes, while keeping the decoding complexity low, thanks to a class of decoding algorithms which exploits the sparseness of the parity-check matrix to reduce the complexity of Gaussian elimination (GE). In this paper the main concepts underlying ML decoding of LDPC c…
This work shows how non-binary low-density parity-check codes over GF($2^p$) can be combined with probabilistic amplitude shaping (PAS) (Böcherer, et al., 2015), which combines forward-error correction with non-uniform signaling for power-efficient communication. Ultra-sparse low-density parity-check codes over GF(64) and GF(256) gain 0.6 dB in power efficiency over state-of-the-art binary LDPC codes at a spectral efficiency of 1.5 bits per channel use and a blocklength of 576 bits. The simulation results are compared to finite length coding bounds and complemented by density evolution analysi…
In this letter, we develop an efficient linear programming (LP) decoding algorithm for low-density parity-check (LDPC) codes. We first relax the maximum likelihood (ML) decoding problem to a LP problem by using check-node decomposition. Then, to solve the resulting LP problem, we propose an efficient iterative algorithm based on the alternating direction method of multipliers (ADMM) technique. In addition, the feasibility analysis of the proposed algorithm is presented. Furthermore, through exploiting the sparsity and orthogonality structures of the LP problem, the computational complexity of …
We introduce new reliability definitions for bit and check nodes. Maximizing global reliability, which is the sum reliability of all bit nodes, is shown to be equivalent to minimizing a decoding metric which is closely related to the maximum likelihood decoding metric. We then propose novel bit-flipping (BF) decoding algorithms that take into account the check node reliability. Both hard-decision (HD) and soft-decision (SD) versions are considered. The former performs better than the conventional BF algorithm and, in most cases, suffers less than 1 dB performance loss when compared with some w…
The error correction performance of low-density parity-check (LDPC) codes under iterative message-passing decoding is degraded by the presence of certain harmful objects existing in their Tanner graph representation. Depending on the context, such harmful objects are known as stopping sets, trapping sets, absorbing sets, or pseudocodewords. In this paper, we propose a general procedure based on edge spreading that enables the design of quasi-cyclic (QC) spatially coupled low-density parity-check codes (SC-LDPCCs) that are derived from QC-LDPC block codes and possess a significantly reduced mul…
This paper considers density evolution for lowdensity parity-check (LDPC) and multi-edge type low-density parity-check (MET-LDPC) codes over the binary input additive white Gaussian noise channel. We first analyze three singleparameter Gaussian approximations for density evolution and discuss their accuracy under several conditions, namely at low rates, with punctured and degree-one variable nodes. We observe that the assumption of symmetric Gaussian distribution for the density-evolution messages is not accurate in the early decoding iterations, particularly at low rates and with punctured va…
Feldman et al.(2005) asked whether the performance of the LP decoder can be improved by adding redundant parity checks to tighten the LP relaxation. We prove that for LDPC codes, even if we include all redundant checks, asymptotically there is no gain in the LP decoder threshold on the BSC under certain conditions on the base Tanner graph. First, we show that if the graph has bounded check-degree and satisfies a condition which we call asymptotic strength, then including high degree redundant checks in the LP does not significantly improve the threshold in the following sense: for each constan…
Let H(D) be the parity-check matrix of an LDPC convolutional code corresponding to the parity-check matrix H of a QC code obtained using the method of Tanner et al. We see that the entries in H(D) are all monomials and several rows (columns) have monomial factors. Let us cyclically shift the rows of H. Then the parity-check matrix H'(D) corresponding to the modified matrix H' defines another convolutional code. However, its free distance is lower-bounded by the minimum distance of the original QC code. Also, each row (column) of H'(D) has a factor different from the one in H(D). We show that t…
Linear Programming (LP) decoding is emerging as an attractive alternative to decode Low-Density Parity-Check (LDPC) codes. However, the earliest LP decoders proposed for binary and nonbinary LDPC codes are not suitable for use at moderate and large code lengths. To overcome this problem, Vontobel et al. developed an iterative Low-Complexity LP (LCLP) decoding algorithm for binary LDPC codes. The variable and check node calculations of binary LCLP decoding algorithm are related to those of binary Belief Propagation (BP). The present authors generalized this work to derive an iterative LCLP deco…
We present a general approach to designing capacity-approaching high-girth low-density parity-check (LDPC) codes that are friendly to hardware implementation. Our methodology starts by defining a new class of "hierarchical" quasi-cyclic (HQC) LDPC codes that generalizes the structure of quasi-cyclic (QC) LDPC codes. Whereas the parity check matrices of QC LDPC codes are composed of circulant sub-matrices, those of HQC LDPC codes are composed of a hierarchy of circulant sub-matrices that are in turn constructed from circulant sub-matrices, and so on, through some number of levels. We show how t…
Two upper bounds on the minimum distance of type-1 quasi-cyclic low-density parity-check (QC LDPC) codes are derived. The necessary condition is given for the minimum code distance of such codes to grow linearly with the code length.
This paper introduces a class of structured lowdensity parity-check (LDPC) codes whose parity check matrices are arrays of permutation matrices. The permutation matrices are obtained from Latin squares and form a finite field under some matrix operations. They are chosen so that the Tanner graphs do not contain subgraphs harmful to iterative decoding algorithms. The construction of column-weight-three codes is presented. Although the codes are optimized for the Gallager A/B algorithm over the binary symmetric channel (BSC), their error performance is very good on the additive white Gaussian no…
