We present, to the best of our knowledge, the highest average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the titled pulse-front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk Yb-amplifier. We study repetition rate dependent effects in our setup at 100 kHz and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and is thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times. The presented result is a first benchmark for high average power THz time domain spectroscopy systems for nonlinear spectroscopy, driven by very high average power ultrafast Yb lasers.
We present a study on THz generation in lithium niobate pumped by a powerful and versatile Yb:CaF2 laser. The unique laser system delivers transform-limited pulses of variable duration (0.38-0.65 ps) with pulse energy of up to 15 mJ at a center wavelength of 1030 nm. From theoretical investigations it is expected that those laser parameters are ideally suited for efficient THz generation. Here we present experimental results on both the conversion efficiency and the THz spectral shape for variable pump pulse durations and for different crystal temperatures down to 25 K. We experimentally verif…
We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also find that the effective interaction length for optimal terahertz conversion is fundamentally limited by terahertz absorption, laser pulse stretching by material dispersion, and terahertz-induced nonlinea…
We obtained an optical-to-terahertz (THz) energy conversion efficiency of 0.5% using the tilted-pulse-front technique in lithium niobate at a cryogenically cooled temperature of 100 K pumped by amplified Ti:sapphire laser pulses with ~150 fs pulse duration at 800 nm wavelength. Compared with the optimized conversion efficiency of 0.18% achieved at room temperature, we achieved more than 2.5 times enhancement in conversion efficiency upon cryogenically cooling the crystal due to reduction of THz absorption. Further improvements to the conversion efficiency can be made by optimizing the out-coup…
We experimentally investigate the limits to 800 nm-to-terahertz (THz) energy conversion in lithium niobate at room temperature driven by amplified Ti:Sapphire laser pulses with tilted-pulse-front. The influence of the pump central wavelength, pulse duration, and fluence on THz generation is studied. We achieved a high peak efficiency of 0.12% using transform limited 150 fs pulses and observed saturation of the optical to THz conversion efficiency at a fluence of 15 mJ/cm2. We experimentally identify two main limitations for the scaling of optical-to-THz conversion efficiencies: (i) the large s…
Free-space super-strong terahertz (THz) electromagnetic fields offer multifaceted capabilities for reaching extreme nonlinear THz optics, accelerating and manipulating charged particles, and realizing other fascinating applications. However, the lack of powerful solid-state THz sources with single pulse energy >1 mJ is impeding the proliferation of extreme THz applications. The fundamental challenge lies in hard to achieve high efficiency due to high intensity pumping caused crystal damage, linear absorption and nonlinear distortion induced short effective interaction length, and so on. Here, …
Using an affordable ytterbium laser with sub-mJ of energy combined with a novel pulse compression technique, we demonstrate an extremely competitive state-of-the-art terahertz (THz) source with 53 mW of average power and 310 kV/cm at focus from the tilted-pulse front pumping scheme in lithium niobate at room temperature. Key points of this demonstration include the use of a pump pulse duration of 280 fs in combination with an echelon mirror. Our results present unmatched combined characteristics and are highly competitive with the existing THz sources pumped at the mJ range. This demonstration…
Terahertz (THz) generation by optical rectification (OR) using tilted-pulse-fronts is studied. One-dimensional (1-D) and 2-D spatial models, which simultaneously account for (i) the nonlinear coupled interaction of the THz and optical radiation, (ii) angular and material dispersion, (iii) absorption, iv) self-phase modulation and (v) stimulated Raman scattering are presented. We numerically show that the large experimentally observed cascaded frequency down-shift and spectral broadening (cascading effects) of the optical pump pulse is a direct consequence of THz generation. In the presence of …
A model for THz generation by optical rectification using tilted-pulse-fronts is developed. It simultaneously accounts for (i) the spatio-temporal distortions of the optical pump pulse, (ii) the nonlinear coupled interaction of THz and optical radiation in two spatial dimensions (2-D), (iii) self-phase modulation and (iv) stimulated Raman scattering. The model is validated by quantitative agreement with experiments and analytic calculations. We show that the optical pump beam is significantly broadened in the transverse-momentum (kx) domain as a consequence of the spectral broadening caused by…
Bridging the "terahertz (THz) gap" relies upon synthesizing arbitrary waveforms in the THz domain enabling applications that require both narrow band sources for sensing and few-cycle drives for classical and quantum objects. However, realization of custom-tailored waveforms needed for these applications is currently hindered due to limited flexibility for optical rectification of femtosecond pulses in bulk crystals. Here, we experimentally demonstrate that thin-film lithium niobate (TFLN) circuits provide a versatile solution for such waveform synthesis through combining the merits of complex…
A new type of tilted-pulse-front pumped terahertz (THz) source has been demonstrated, which is based on a lithium niobate plane-parallel slab with an echelon structure on its input surface. Single-cycle pulses of 1 microjoule energy and 0.30 THz central frequency have been generated with 0.05% efficiency from such a source. One order-of-magnitude increase in efficiency is expected by pumping a cryogenically cooled echelon of increased size and thickness with a Ti:sapphire laser. The use of a plane-parallel nonlinear optical crystal slab enables straightforward scaling to high THz pulse energie…
Using the tilted-pulse-intensity-front scheme, we generate single-cycle terahertz (THz) pulses by optical rectification of femtosecond laser pulses in LiNbO3. In the THz generation setup, the condition that the image of the grating coincides with the tilted-optical-pulse front is fulfilled to obtain optimal THz beam characteristics and pump-to-THz conversion efficiency. The designed focusing geometry enables tight focus of the collimated THz beam with a spot size close to the diffraction limit, and the maximum THz electric field of 1.2 MV/cm is obtained.
High-power multicycle THz radiation is highly sought after with applications in medicine, imaging, spectroscopy, characterization and manipulation of condensed matter, and could support the development of next-generation compact laser-based accelerators with applications in electron microscopy, ultrafast X-ray sources and sub-femtosecond longitudinal diagnostics. Multicycle THz-radiation can be generated by shooting an appropriate laser through a periodically poled nonlinear crystal, e.g. lithium niobate (PPLN). Unfortunately, the manufacturing processes of PPLNs require substantially strong e…
A high-resolution broad-spectral-bandwidth spectrometer on a chip would create new opportunities for gas-phase molecular fingerprinting, especially in environmental sensing. A resolution high enough to observe transitions at atmospheric pressure and the simultaneous sensitive detection of multiple atoms or molecules are the key challenges. Here, an electro-optic microring-based dual-comb interferometer, fabricated on a low-loss lithium-niobate-on-insulator nanophotonic platform, demonstrates significant progress towards such an achievement. Spectra spanning 1.6 THz (53 cm-1) at a resolution of…
Extraordinarily transmitting arrays are promising candidates for quasi-optical (QO) components due to their high frequency selectivity and beam scanning capabilities owing to the leaky-wave mechanism involved. We show here how by breaking certain unit cell and lattice symmetries, one can achieve a rich family of transmission resonances associated with the leaky-wave dispersion along the surface of the array. By combining 2-D and 1-D periodic method of moments (MoM) calculations with QO terahertz (THz) time-domain measurements, we provide physical insights, numerical, and experimental demonstra…
We demonstrate THz generation using the tilted pulse front method in Lithium Niobate, driven at unprecedented high average power of more than 100 W and at 13.3 MHz repetition rate, provided by a compact amplifier-free modelocked thin-disk oscillator. The conversion efficiency was optimized with respect to pump spot size and pump pulse duration, enabling us to generate a maximum THz average power of 66 mW, which is the highest reported to date from a laser-driven, few-cycle THz source. Furthermore, we identify beam walk-off as the main obstacle that currently limits the conversion efficiency in…
The goal of this report is to study the conditions for efficient THz generation using Frequency Difference Generation principle. In particular, two CW IR beams are used together with a periodically poled lithium niobate crystal in order to generate a continuous THz wave. As a source of the IR pump beams we consider a 30W (CW) IPG Er-doped fiber-amplifier which currently is the most powerful commercial amplifier on the market. The work is motivated by application of CW sources of THz waves in high bit wireless communication applications. The amplifier will allow to mix two optically modulated I…
We present a novel method for THz generation in lithium niobate using a reflective stair-step echelon structure. The echelon produces a discretely tilted pulse front with less angular dispersion compared to a high groove-density grating. The THz output was characterized using both a 1-lens and 3-lens imaging system to set the tilt angle at room and cryogenic temperatures. Using broadband 800 nm pulses with a pulse energy of 0.95 mJ and a pulse duration of 70 fs (24 nm FWHM bandwidth, 39 fs transform limited width), we produced THz pulses with field strengths as high as 500 kV/cm and pulse ener…
Microresonator frequency combs based on the $χ^{(3)}$ nonlinearity are nowadays well understood and making their way into different applications. Recently, microresonator frequency combs based on the $χ^{(2)}$ nonlinearity are receiving increasing attention, as they promise certain benefits, but still require further study. Here, we demonstrate the generation of a $χ^{(2)}$ frequency comb, initiated via optical parametric oscillation (OPO) in a lithium niobate mm-sized microresonator. By pumping at 532 nm with 30 $μ$W of power, we observe 1-THz-wide comb spectra around 1064 nm with degenerate …
We demonstrate a compact two-chip terahertz-emitting vertical-external-cavity surface-emitting laser (TECSEL) source, which provides 1-THz output based on intracavity frequency conversion of dual-wavelength emission in a periodically-poled lithium niobate crystal. The type-I frequency conversion scheme at room temperature highly benefits from the power-scaling possibilities in a multichip cavity with intracavity powers in excess of 500 W.
Integrated optics provides a platform for the experimental implementation of highly complex and compact circuits for practical applications as well as for advances in the fundamental science of quantum optics. The lithium niobate (LN) waveguide is an important candidate for the construction of integrated optical circuits. Based on the bound state in the continuum (BIC) in a LN waveguide, we propose an efficient way to produce polarization-entangled photon pairs. The implementation of this method is simple and does not require the polarization process needed for periodically poled LN. The gener…
Optical rectification of ultrashort laser pulses in LiNbO3 by tilted-pulse-front excitation is a powerful way to generate near single-cycle terahertz (THz) pulses. Motivated by various applications, calculations were carried out to optimize the THz peak electric field strength. The results predict THz output with peak electric field strength on the MV/cm level in the 0.3-1.5 THz frequency range by using optimal pump pulse duration of about 500 fs, optimal crystal length, and cryogenic temperatures for reducing THz absorption in LiNbO3. The THz electric field strength can be increased further t…
Deriving single or few cycle terahertz pulse (THz) by intense femtosecond laser through cascaded optical rectification in electro-optic crystals is a crucial technique in cutting-edge time-resolved spectroscopy to characterize micro-scale structures and ultrafast dynamics. In the past decade, lithium niobate (LN) crystal implementation of wave-front tilt scheme has been prevalently used, while painstaking efforts have been invested in order to achieve higher THz conversion efficiency. In this research we developed a brand new type of LN crystal possessing dual-face-cut and Brewster coupling, a…
We report on the global temporal pulse characteristics of individual harmonics in an attosecond pulse train by means of photo-electron streaking in a strong low-frequency transient. The scheme allows direct retrieval of pulse durations and first order chirp of individual harmonics without the need of temporal scanning. The measurements were performed using an intense THz field generated by tilted phase front technique in LiNbO_3 . Pulse properties for harmonics of order 23, 25 and 27 show that the individual pulse durations and linear chirp are decreasing by the harmonic order.
Electrically driven acousto-optic devices that provide beam deflection and optical frequency shifting have broad applications from pulse synthesis to heterodyne detection. Commercially available acousto-optic modulators are based on bulk materials and consume Watts of radio frequency power. Here, we demonstrate an integrated 3-GHz acousto-optic frequency shifter on thin-film lithium niobate, featuring a carrier suppression over 30 dB. Further, we demonstrate a gigahertz-spaced optical frequency comb featuring more than 200 lines over a 0.6-THz optical bandwidth by recirculating the light in an…
We report multicycle, narrowband, terahertz radiation at 14.8 THz produced by phase-matched optical rectification of femtosecond laser pulses in bulk lithium niobate (LiNbO$_3$) crystals. Our experiment and simulation show that the output terahertz energy greatly enhances when the input laser pulse is highly chirped, contrary to a common optical rectification process. We find this abnormal behavior is attributed to a linear electro-optic (or Pockels) effect, in which the laser pulse propagating in LiNbO$_3$ is modulated by the terahertz field it produces, and this in turn drives optical rectif…
Squeezed light is a key quantum resource that enables quantum advantages for sensing, networking, and computing applications. The scalable generation and manipulation of squeezed light with integrated platforms are highly desired for the development of quantum technology with continuous variables. In this letter, we demonstrate squeezed light generation with thin-film lithium niobate integrated photonics. Para-metric down-conversion is realized with quasi-phase matching using ferroelectric domain engineering. With sub-wavelength mode confinement, efficient nonlinear processes can be observed w…
The 1-10 terahertz (THz) spectral window is emerging as a key region for plenty of applications, requiring not yet available continuous-wave room-temperature THz spectrometers with high spectral purity and ultra-broad tunability. In this regard, the spectral features of stabilized telecom sources can actually be transferred to the THz range by difference frequency generation, considering that the width of the accessible THz spectrum generally scales with the area involved in the nonlinear interaction. For this reason, in this paper we extensively discuss the role of Lithium Niobate (LN) channe…
Chip-integrated nonlinear photonics holds the key for advanced optical information processing with superior performance and novel functionalities. Here, we present an optimally mode-matched, periodically poled lithium niobate nanowaveguide for efficient parametric frequency conversions on chip. Using a 4-mm nanowaveguide with subwavelength mode confinement, we demonstrate second harmonic generation with efficiency over $2200\%~W^{-1}cm^{-2}$, and broadband difference frequency generation with similar efficiency over a 4.5-THz spectral span. These allow us to generate correlated photon pairs ov…
The use of laser pulse sequences to drive the cascaded difference frequency generation of high energy, high peak-power and multi-cycle terahertz pulses in cryogenically cooled periodically poled lithium niobate is proposed. Detailed simulations considering the coupled nonlinear interaction of terahertz and optical waves show that unprecedented optical-to-terahertz energy conversion efficiencies > 5%, peak electric fields of hundred(s) of Mega volts/meter at terahertz pulse durations of hundred(s) of picoseconds can be achieved. The proposed methods are shown to circumvent laser-induced damage …
By combining a tilted-pulse-intensity-front scheme using a LiNbO3 crystal and a chirped-pulse-beating method, we generated a narrowband intense terahertz (THz) pulse, which had a maximum electric field of more than 10 kV/cm at around 2 THz, a bandwidth of about 50 GHz,and frequency tunability from 0.5 to 2 THz. By performing THz-pump and near-infrared-probe experiments on GaAs quantum wells, we observed that the resonant excitation of the intraexcitonic 1s-2p transition induces a clear and large Autler-Townes splitting. Our time-resolved measurements show that the splitting energy observed in …
The intense terahertz (THz) pulses facilitate the observation of various nonlinear optical effects and manipulation of material properties. In this work, we report a convenient approach that can produce strong broadband terahertz pulses with center frequency tunable between 2-4 THz. The coherent THz light source with pulse energy of 1.2 microjoule can be generated from a low-cost crystalline quartz pumped by an ultrashort tilted wave-front pulse. Thanks to the wide transparent spectral window and high damage threshold, our theoretical analysis and experiment show that the optical rectification…
We refine the method towards extraction of sub-cycle transients in the 0.1-1 THz frequency (mm-wavelength) range from optical rectification in lithium niobate using tilted pulse fronts. Our scheme exploits previously unexplored spatio-temporal shaping of the pump pulses, resulting in highly efficient and near diffraction-limited sub-THz transients reaching 0.2 GV/m electric field strengths in free-space using only mJ-level optical ps-pulses. We address experimentally and theoretically the means to producing above-GV/m relativistic sub-THz transients with proper beam confinement and under moder…
The organic terahertz (THz) generation crystal BNA has recently gained traction as a valuable source to produce broadband THz pulses. Even when pumped with 800-nm light, thin BNA crystals can produce relatively high electric fields with frequency components out to 5 THz. However, the THz output when pumped with 800-nm light is limited by the damage threshold of the organic crystal. Here we report that the damage threshold of BNA can be significantly improved by physically bonding BNA to a high-thermal conductivity sapphire window. When pumped with 800-nm light from an amplified Ti:sapphire las…
Manipulating the atomic and electronic structure of matter with strong terahertz (THz) fields while probing the response with ultrafast pulses at x-ray free electron lasers (FELs) has offered unique insights into a multitude of physical phenomena in solid state and atomic physics. Recent upgrades of x-ray FEL facilities are pushing to much higher repetition rates, enabling unprecedented signal to noise for pump probe experiments. This requires the development of suitable THz pump sources that are able to deliver intense pulses at compatible repetition rates. Here we present a high power laser-…
Terahertz (THz) waves have been significantly developed in the last fifteen years because of their great potential for applications in industrial and scientific communities1,2. The unique properties of THz waves as transparency for numerous materials and strong absorption for water-based materials are expected to broadly impact biosensing3 such as medical imaging4, chemical identifications5, and DNA recognition6. In particular, for accessing information within a scale comparable to the cell size where interactions between cell membrane and other organelle structures occur, micron size spatial …
We report on an attempt to generate highly stable continuous terahertz (THz) wave by using optical frequency comb (OFC). About 10-nm wide OFC has been generated through a deep phase modulation of a 852 nm laser line in lithium niobate crystal cavity. The multiple optical modes (side bands) of the OFC, which are equally separated from each other by the modulation frequency (=6 GHz) are taken as the frequency reference. When another semiconductor laser is frequency locked, the stability of the difference frequency between the master laser and the second laser is improved on the same order of the…
