We demonstrate THz generation using the tilted pulse front method in Lithium Niobate, driven at unprecedented high average power of more than 100 W and at 13.3 MHz repetition rate, provided by a compact amplifier-free modelocked thin-disk oscillator. The conversion efficiency was optimized with respect to pump spot size and pump pulse duration, enabling us to generate a maximum THz average power of 66 mW, which is the highest reported to date from a laser-driven, few-cycle THz source. Furthermore, we identify beam walk-off as the main obstacle that currently limits the conversion efficiency in this excitation regime (with moderate pulse energies and small spot sizes). Further upscaling to the watt level and beyond is within reach, paving the way for linear and nonlinear high-average power THz spectroscopy experiments with exceptional signal-to-noise ratio at MHz repetition rates.
A high repetition rate, picosecond THz parametric amplifier (TPA) with a LiNbO3 (LN) crystal has been demonstrated in this work. At 10 kHz repetition rate, a peak power of 200 W and an average power of 12 μW have been obtained over a wide range around 2 THz; at 100 kHz repetition rate, a maximum peak power of 18 W and average power of 10.8 μW have been obtained. The parametric gain of the LN crystal was also investigated and a modified Schwarz-Maier model was introduced to interpret the experimental results.
We demonstrate a 13.3 MHz repetition rate, broadband THz source with milliwatt-average power, obtained by collinear optical rectification of a high-power Yb-doped thin-disk laser in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline). Our source reaches a maximum THz average power of 0.95 mW with an optical-to-THz efficiency of 4e-4 and a spectral bandwidth spanning up to 6 THz at -50 dB, driven by 2.4 W average power (after an optical chopper with duty cycle of 10%), 85 fs-pulses. This high average power excitation was possible without damaging the crystal by using a diamond-heatsinked…
Manipulating the atomic and electronic structure of matter with strong terahertz (THz) fields while probing the response with ultrafast pulses at x-ray free electron lasers (FELs) has offered unique insights into a multitude of physical phenomena in solid state and atomic physics. Recent upgrades of x-ray FEL facilities are pushing to much higher repetition rates, enabling unprecedented signal to noise for pump probe experiments. This requires the development of suitable THz pump sources that are able to deliver intense pulses at compatible repetition rates. Here we present a high power laser-…
We have used injection locking to multiply the repetition rate of a passively mode-locked femtosecond fiber laser from 40 MHz to 1 GHz while preserving optical phase coherence between the master laser and the slave output. The system is implemented almost completely in fiber and incorporates gain and passive saturable absorption. The slave repetition rate is set to a rational harmonic of the master repetition rate, inducing pulse formation at the least common multiple of the master and slave repetition rates.
We present on THz generation in the two-color gas plasma scheme driven by a high-power, ultrafast fiber laser system. The applied scheme is a promising approach for scaling the THz average power but it has been limited so far by the driving lasers to repetition rates up to 1 kHz. Here, we demonstrate recent results of THz generation operating at a two orders of magnitude higher repetition rate. This results in a unprecedented THz average power of 50 mW. The development of compact, table-top THz sources with high repetition rate and high field strength is crucial for studying nonlinear response…
We combine soliton dynamics in gas-filled hollow-core photonic crystal fibers with a state-of-the-art fiber laser to realize a turn-key system producing few-fs pulses at 8 MHz repetition rate at pump energies as low as 220 nJ. Furthermore, by exploiting the soliton self-frequency shift in a second hydrogen-filled hollow-core fiber, we efficiently generate pulses as short as 22 fs, continuously tunable from 1100 nm to 1474 nm.
Nanoscale pulsed light is highly desirable in nano-integrated optics. In this letter, we obtained femtosecond pulses with THz repetition frequency via the strong coupling between quantum emitters (QEs) and plasmonic resonators. Our structure consists of a V-groove (VG) plasmonic resonator and a nanowire embedded with two-level QEs. The influences of the incident light intensity and QE number density on the transmission response for this hybrid system are investigated through semi-classical theory and simulation. It is found that the transmission response can be modulated to the pulse form. The…
Although ultraviolet (UV) light is important in many areas of science and technology, there are very few if any lasers capable of delivering wavelength-tunable ultrashort UV pulses at MHz repetition rates. Here we report the generation of deep-UV laser pulses at MHz repetition rates and μJ-energies by means of dispersive wave (DW) emission from self-compressed solitons in gas-filled single-ring hollow-core photonic crystal fiber (SR-PCF). Pulses from an ytterbium fiber laser (~300 fs) are first compressed to ~25 fs in a SR-PCF-based nonlinear compression stage, and subsequently used to pump a …
Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W at 400 kHz repetition rate, temporally compressed to a pulse d…
We report the coherent generation and detection of terahertz (THz) pulses covering the bandwidth of 0.1-9 THz in a high repetition rate, low pulse energy laser system. In this work we demonstrate the application and evaluation of solid-state biased coherent detection in combination with a spintronic emitter. This combination was used to generate and detect THz pulses in a time-domain spectroscopy (TDS) setup and tested on bulk nonlinear crystals. These results establish a new promising candidate to extend the possibilities for compact, broadband THz TDS systems driven by high repetition rate l…
Vectorial nature of dissipative solitons (DSs) with high repetition rates is studied for the first time in a normal-dispersion fiber laser. Despite the fact that the formed DSs are strongly chirped and the repetition rate is greater than 100 MHz, polarization locked and polarization rotating group velocity locked vector DSs can be formed under 129.3 MHz fundamental mode-locking and 258.6 MHz harmonic mode-locking of the fiber laser, respectively. The two orthogonally polarized components of these vector DSs possess distinctly different central wavelengths and travel together at the same group …
Here, we demonstrate all-fiber direct amplification of 11 picosecond pulses from a gain-switched laser diode at 1063nm. The diode was driven at a repetition rate of 40MHz and delivered 13$μ$W of fiber-coupled average output power. For the low output pulse energy of 0.33pJ we have designed a multi-stage core pumped preamplifier based on single clad Yb-doped fibers in order to keep the contribution of undesired amplified spontaneous emission as low as possible and to minimize temporal and spectral broadening. After the preamplifier we reduced the 40MHz repetition rate to 1MHz using a fiber coupl…
We report the synthesis of arbitrary optical waveforms by manipulating the spectral phases of Raman sidebands with a wide frequency spacing line-by-line. Trains of rectangular and triangular pulses are stably produced at an ultrahigh repetition rate of 10.6229 THz, reminiscent of an ultrafast function generator.
We demonstrate the operation of an ultra low repetition rate, high peak power, picosecond diode pumped Nd:YVO4 passively mode locked laser oscillator. Repetition rates even below 1 MHz were achieved with the use of a new design multiple-pass cavity and a semiconductor saturable absorber. Long term stable operation at 1.2 MHz, pulse duration of 16.3 ps and average output power of 470 mW corresponding to 24 KW peak power pulses is reported. This is, to our knowledge, the lowest repetition rate high peak power pulses ever generated directly from a picosecond laser resonator without cavity dumping…
Over the past years, ultrafast lasers with average powers in the 100 W range have become a mature technology, with a multitude of applications in science and technology. Nonlinear temporal compression of these lasers to few- or even single-cycle duration is often essential, yet still hard to achieve, in particular at high repetition rates. Here we report a two-stage system for compressing pulses from a 1030 nm ytterbium fiber laser to single-cycle durations with 5 $μ$J output pulse energy at 9.6 MHz repetition rate. In the first stage, the laser pulses are compressed from 340 to 25 fs by spect…
A compact pulsed Nd:LuAG laser at 1064 nm based on the self-Q-switching technique is reported, having the output power as high as 6.61 W at the incident pump power of 21.32 W, corresponding to the optical conversion efficiency of ~31 %. The temporal width of the pulse was in the range from 532.2 ns to 652.6 ns, and the repetition rate varied between 488.6 kHz and 551.9 kHz. To the best of our knowledge, this is the first report on the self-Q-switching Nd:LuAG laser. Possible reasons for the self-Q-switching of Nd:LuAG were also provided, and the factor leading to the high repetition rate was a…
Dual-comb generation from a single laser cavity provides a simple and high-performance solution to time sampling applications. We demonstrate a compact single-cavity dual-comb laser operating at gigahertz repetition rates and high repetition rate differences up to more than 100 kHz with sub-100 fs pulse duration. The single cavity approach leads to passive common noise suppression resulting in ultra-low relative timing jitter and fully resolvable comb lines in free-running operation. We showcase the laser performance with two application demonstrations: (a) time-domain spectroscopy of acetylen…
The dynamics of dissipative solitons (DSs) are explored in a high repetition rate normal-dispersion erbium-doped fiber laser for the first time. Despite of the high fundamental repetition rate of 129 MHz and thus the low pulse energy, a DS train with a dechirped pulse width of 418 fs, period-doubling of single and dual DSs, as well as 258 MHz 2nd-order harmonic mode-locking of DSs can be observed in the fiber laser with increasing pump power and appropriate settings. A transmitted semiconductor saturable absorber and a wavelength division multiplexer/isolator/tap hybrid module are employed to …
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic modulator and a piezo-transducer, the repetition rate can be stabilized with high servo bandwidth in a range of 3 kHz, enabling long-term repetition rate phase-locking. The in-loop frequency stability of repetition rate is about 1.6E-13 at 1 second integration time, limited by the measurement system; and it is inversely proportional to integration time in short …
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation and opto-electronic frequency conversion. The THz comb lines are characterized to be < 10 MHz by resolving the pressure dependent collisional broadening of an ammonia molecule rotational mode.
Vacuum ultraviolet (VUV) light is critical for the study of molecules and materials, but the generation of femtosecond pulses in the VUV region at high repetition rates has proven difficult. Here, we demonstrate the efficient generation of VUV light at MHz repetition rates using highly cascaded four-wave mixing processes in a negative-curvature hollow-core fiber. Both even and odd order harmonics are generated up to the 15th harmonic (69 nm, 18.0 eV), with high energy resolution of ~40 meV. In contrast to direct high harmonic generation, this highly cascaded harmonic generation process require…
We demonstrate repetition-rate downsampling of optical frequency combs by way of pulse gating. The reduced repetition rate enables increased pulse energy, facilitating efficient spectral broadening and f-2f interferometry. To explore the technique, we downsample a 250 MHz repetition-rate comb to 25 MHz and detect the carrier-envelope offset frequency of the downsampled pulse train. We investigate the effects of pulse gating on the noise properties of the pulse train and the limitations of the technique by characterizing the phase-noise spectrum of the downsampled comb and deliberately imposing…
Ultra-short pulses with high repetition frequency have great application prospects in the field of nano-optics. Here, in the case of continuous wave incidence, the femtosecond pulses with THz repetition frequency are achieved in the transmission system consisting of a rectangular cavity, a V-groove (VG) cavity and a nanowire embedded with quantum emitters (QEs). The generation mechanism of the ultra-short pulses with high repetition frequency is elucidated by semi-classical Dicke model. Attribute to the presence of the two-level QEs, the field amplitude in plasmonic resonator is oscillating wi…
Here, to the best of our knowledge, for the first time we report the in-depth experimental study of high ultrafast laser ablation efficiency for processing of copper and steel with single-pulses, MHz-, GHz- and burst in the burst (biburst) regime. The comparison of burst, biburst, and single-pulse ablation efficiencies was performed for beam-size-optimised regimes, showing the real advantages and disadvantages of milling and drilling processing approaches. Highly-efficient ultrashort pulse laser processing was achieved for ~1 um optical wavelength: 8.8 um3/uJ for copper drilling, 5.6 um3/uJ fo…
We show that a 1.13-GHz repetition rate optical pulse train with 0.70 fs high-frequency timing jitter (integration bandwidth of 17.5 kHz - 10 MHz, where the measurement instrument-limited noise floor contributes 0.41 fs in 10 MHz bandwidth) can be directly generated from a free-running, single-mode diode-pumped Yb:KYW laser mode-locked by single-walled carbon nanotube (SWCNT)-coated mirrors. To our knowledge, this is the lowest timing jitter optical pulse train with the GHz repetition rate ever measured. If this pulse train is used for direct sampling of 565-MHz signals (Nyquist frequency of t…
The coherent temporal soliton in optical microresonators has attracted great attention recently. Here, we demonstrate the dissipative Kerr soliton generation in a microrod resonator, by utilizing an auxiliary-laser-assisted thermal response control. By external stress tuning, the repetition rate of the soliton has been controlled over a large range of 30 MHz. Our platform promises precise tuning and locking of the repetition frequency of coherent mode-locked comb in the microresonator, and holds great potential for applications in spectroscopy and precision measurements.
Low loss, optical channel waveguides have been successfully produced by high repetition rate, femtosecond laser inscription in a Li-Zn fluoroborate glass (64.9B2O3 + 25Li2O + 10ZnF2 + 0.1Er2O3). High quality waveguides were produced at 500 kHz, 1 MHz and 2 MHz laser repetition rates, showing a refractive index contrast in the range of 3-6 x 10-3 depending on various fluences. Dependence of experimental parameters such as average laser power, pulse repetition rate and writing speed on the properties of fabricated waveguides has been discussed. The comparison of optical and compositional charact…
We present a high-power source of broadband terahertz radiation covering the whole THz spectral region (0.1-30 THz). The two-color gas plasma generation process is driven by a state-of-the-art Ytterbium fiber chirped pulse amplification system based on coherent combination of 16 rod-type amplifiers. Prior to the THz generation, the pulses are spectrally broadened in a multi-pass-cell and compressed to 37 fs with a pulse-energy of 1.3 mJ at a repetition rate of 500 kHz. A gas-jet scheme has been employed for the THz generation, increasing the efficiency of the process to 0.1%. The air-biased-co…
Graded-index multimode fibers can handle high average powers and feature unique nonlinear dynamics due to spatio-temporal evolution of the light inside. We report on generation of octave-spanning spectrally flat supercontinua in graded-index multimode fibers using a compact, ytterbium-doped all-fiber laser system. Supercontinua with output powers as high as $\sim$4 W and 2 MHz repetition rate obtained with more than 1 $μ$m spectral bandwidth. Evolution of supercontinuum is investigated by studying the effect of launch power, repetition rate, fiber length and core size. Numerical simulations ar…
Optical injection locking is implemented to faithfully transfer the phase noise of a dissipative Kerr microresonator soliton comb in addition to the amplification of the Kerr comb. Unlike Er-doped fiber and semiconductor optical amplifiers, the optical injection locking amplifies the comb mode without degrading the optical signal-to-noise ratio. In addition, we show that the residual phase noise of the optical injection locking is sufficiently small to transfer the relative phase noise of comb modes (equivalent to the repetition frequency) of low phase noise Kerr combs, concluding that the opt…
Selective enhancement of coherent optical phonons in Bi-Sb mixed crystals has been performed using terahertz (THz) rate pulse trains generated by spatial phase modulation of femtosecond pulse with a liquid-crystal spatial light modulator. The profile of the shaped pulse train has a flat-toped shape. The Bi-Bi, Bi-Sb, and Sb-Sb vibrations can be enhanced and canceled selectively for pulse trains with a suitable repetition rate.
Octave-wide frequency combs in microresonators are essential for self-referencing. However, it is difficult for the small-size and high-repetition-rate microresonators to achieve perfect soliton modelocking over the broad frequency range due to the detrimental impact of dispersion. Here we examine the stability of the soliton states consisting of one hundred modes in silicon-nitride microresonators with the one-THz free spectral range. We report the coexistence of fast and slow solitons in a narrow detuning range, which is surrounded on either side by the breather states. We decompose the brea…
