Ryunosuke Ozawa, Yohei Sakurai, Taiki Yamada
In a previous work, the authors have introduced a Lin-Lu-Yau type Ricci curvature for directed graphs, and obtained a diameter comparison of Bonnet-Myers type. In this paper, we investigate rigidity properties for the equality case, and conclude a maximal diameter theorem of Cheng type.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
It is shown that the diameter of a compact shrinking Ricci soliton has a universal lower bound. This is proved by extending universal estimates for the first non-zero eigenvalue of Laplacian on compact Riemannian manifolds with lower Ricci curvature bound to a twisted Laplacian on compact shrinking Ricci solitons.
In this note we discuss the fundamental groups and diameters of positively Ricci curved $n$-manifolds. We use a method combining the results about equivarient Hausdorff convergence developed by Fukaya and Yamaguchi with the Ricci version of splitting theorem by Cheeger and Colding to give new information on the topology of compact manifolds with positive Ricci curvature. Moreover, we also obtain a weak Margulis's lemma for manifolds under a lower Ricci curvature bound.
For Riemannian manifolds with a smooth measure $(M, g, e^{-f}dv_{g})$, we prove a generalized Myers compactness theorem when Bakry--Emery Ricci tensor is bounded from below and $f$ is bounded.
We give a sharp upper diameter bound for a compact shrinking Ricci soliton in terms of its scalar curvature integral and the Perelman's entropy functional. The sharp cases could occur at round spheres. The proof mainly relies on a sharp logarithmic Sobolev inequality of gradient shrinking Ricci solitons and a Vitali-type covering argument.
In this article, stimulated by Fernandez-Lopez and Garcia-Rio, we shall give an upper diameter bound for compact Ricci solitons in terms of the range of the scalar curvature. As an application, we shall provide some sufficient conditions for four-dimensional compact Ricci solitons to satisfy the Hitchin-Thorpe inequality.
In this paper, we shall give a new upper diameter estimate for complete Riemannian manifolds in the case that the Bakry-Émery Ricci curvature has a positive lower bound and the norm of the potential function has an upper bound. Our diameter estimate improves previous ones obtained by Wei and Wylie (J. Differential Geom. 83, 377--405, 2009) and Limoncu (Math. Z. 271, 715--722, 2012). As an application, we shall give an upper diameter bound for compact Ricci solitons in terms of the maximum value of the scalar curvature. By using such a diameter bound, we shall provide some new sufficient condit…
We obtain a lower bound for the diameter of a solution to the Ricci flow on a compact manifold with nonvanishing first real cohomology. A consequence of our result is an affirmative answer to Hamilton's conjecture that a product metric on $(S^{1}\times S^{n-1}$ cannot arise as a final time limit flow.
In this paper, we shall give a lower diameter bound for compact domain manifolds of shrinking Ricci-harmonic solitons. Our result may be regarded as a generalization to Ricci-harmonic geometry of the recent works by Fernández-López and García-Río (Q. J. Math. 61, 319--327, 2010), Futaki and Sano (Asian J. Math. 17, 17--32, 2013), and Futaki \textit{et al} (Ann. Global Anal. Geom. 44, 105--114, 2013).
A new proof of Perelman's scalar curvature and diameter estimates for the Kähler-Ricci flow on Fano manifolds
本文为Fano流形上Kähler-Ricci流的Perelman标量曲率和直径估计提供新证明，基于时空函数族的新Harnack估计，并推广至一般有限时间解。
We prove a lower bound estimate for the first non-zero eigenvalue of the Witten-Laplacian on compact Riemannian manifolds. As an application, we derive a lower bound estimate for the diameter of compact gradient shrinking Ricci solitons. Our results improve some previous estimates which were obtained by the first author and Y. Sano in [12], and by B. Andrews and L. Ni in [1]. Moreover, we extend the diameter estimate to compact self-similar shrinkers of mean curvature flow.
In 1968, Milnor conjectured that a complete noncompact manifold with nonnegative Ricci curvature has a finitely generated fundamental group. The author applies the Excess Theorem of Abresch and Gromoll (1990), to prove two theorems. The first states that if such a manifold has small linear diameter growth then its fundamental group is finitely generated. The second states that if such a manifold has an infinitely generated fundamental group then it has a tangent cone at infinity which is not polar. A corollary of either theorem is the fact that if such a manifold has linear volume growth, then…
We show that, given an immortal solution to the Ricci flow on a closed manifold with uniformly bounded curvature and diameter, the Ricci tensor goes to zero as t goes to infinity. We also show that if there exists an immortal solution on a closed 3-dimensional manifold such that the product of the square of the diameter with the norm of the curvature tensor is uniformly bounded, then the solution must be of type III.
Quantitative Maximal Diameter Rigidity of Positive Ricci Curvature
本文证明在正 Ricci 曲率下，若流形直径接近最大直径且局部万有覆盖满足 Riefenberg 条件，则其与单位球面微分同胚且双 Hölder 接近，从而将 Cheng 刚性定理定量化。
Weak transcendental base-point freeness and diameter lower bounds for the Kähler-Ricci flow
该研究在紧致Kähler流形上证明了弱超越基点无关性，并据此推导了非Fano初始数据的Kähler-Ricci流有限时间奇点的直径下界。
Discrete time random walks on a finite set naturally translate via a one-to-one correspondence to discrete Laplace operators. Typically, Ollivier curvature has been investigated via random walks. We first extend the definition of Ollivier curvature to general weighted graphs and then give a strikingly simple representation of Ollivier curvature using the graph Laplacian. Using the Laplacian as a generator of a continuous time Markov chain, we connect Ollivier curvature with the heat equation which is strongly related to continuous time random walks. In particular, we prove that a lower bound o…
In this note, we prove that positive scalar curvature can pass to three dimensional Ricci limit spaces of non-negative Ricci curvature when it splits off a line. As a corollary, we obtain an optimal Bonnet-Myers type upper bound. Moreover, we obtain a similar statement in all dimensions for Alexandrov spaces of non-negative curvature.
A goal in network science is the geometrical characterization of complex networks. In this direction, we have recently introduced Forman's discretization of Ricci curvature to the realm of undirected networks. Investigation of this edge-centric network measure, Forman-Ricci curvature, in diverse model and real-world undirected networks revealed that the curvature measure captures several aspects of the organization of undirected complex networks. However, many important real-world networks are inherently directed in nature, and the definition of the Forman-Ricci curvature for undirected networ…
Diameter bounds in 3d Type I Ricci flows
本文证明三维紧致Ricci流遇到Type I奇点时直径一致有界，肯定回答Perelman猜想；通过引入颈部区域并证明填充测度的Ahlfors正则性实现。
For an immortal Ricci flow on an $m$-dimensional $(m\ge 3)$ closed manifold, we show the following convergence results: (1) if the curvature and diameter are uniformly bounded, then any unbounded sequence of time slices sub-converges to a Riemannian orbifold; (2) if the flow is type-III with diameter growth controlled by $t^{\frac{1}{2}}$, then any blowdown limit is an $m$-dimensional negative Einstein manifold, provided that Feldman-Ilmanen-Ni's $\boldsymbolμ_+$-functional satisfies $\lim_{t\to \infty} t\boldsymbolμ_+'(t)=0$.
It is well known that the Kähler-Ricci flow on a Kähler manifold $X$ admits a long-time solution if and only if $X$ is a minimal model, i.e., the canonical line bundle $K_X$ is nef. The abundance conjecture in algebraic geometry predicts that $K_X$ must be semi-ample when $X$ is a projective minimal model. We prove that if $K_X$ is semi-ample, then the diameter is uniformly bounded for long-time solutions of the normalized Kähler-Ricci flow. Our diameter estimate combined with the scalar curvature estimate in [34] for long-time solutions of the Kähler-Ricci flow are natural extensions of Perel…
In a previous work, the authors introduced a Lin-Lu-Yau type Ricci curvature for directed graphs referring to the formulation of the Chung Laplacian. The aim of this note is to provide a von Renesse-Sturm type characterization of our lower Ricci curvature bound via a gradient estimate for the heat semigroup, and a transportation inequality along the heat flow. As an application, we will conclude a concentration of measure inequality for directed graphs of positive Ricci curvature.
For undirected graphs, the Ricci curvature introduced by Lin-Lu-Yau has been widely studied from various perspectives, especially geometric analysis. In the present paper, we discuss generalization problem of their Ricci curvature for directed graphs. We introduce a new generalization by using the mean transition probability kernel which appears in the formulation of the Chung Laplacian. We conclude several geometric and spectral properties of directed graphs under a lower Ricci curvature bound extending previous results in the undirected case.
An equivalent definition of entropic Ricci curvature on discrete spaces was given in terms of the global gradient estimate. With a particular choice of the density function $ρ$, we obtain a localized gradient estimate, which in turns allow us to derive a Bonnet-Myers type diameter bound for graphs with positive entropic Ricci curvature. However, the case of the hypercubes indicates that the bound may be not optimal (where $θ$ is chosen to be logarithmic mean by default). If $θ$ is arithmetic mean, the Bakry-Émery criterion can be recovered and the diameter bound is optimal as it can be attaine…
If g(t) is a three-dimensional Ricci flow solution, with sectional curvatures that decay like the inverse of t and diameter that increases at most like the square root of t, then the pullback Ricci flow solution on the universal cover approaches a homogeneous expanding soliton.
A question about Ricci flow is when the diameters of the manifold under the evolving metrics stay finite and bounded away from 0. Topping \cite{T:1} addresses the question with an upper bound that depends on the $L^{(n-1)/2}$ bound of the scalar curvature, volume and a local version of Perelman's $ν$ invariant. Here $n$ is the dimension. His result is sharp when Perelman's F entropy is positive. In this note, we give a direct proof that for all compact manifolds, the diameter bound depends just on the $L^{(n-1)/2}$ bound of the scalar curvature, volume and the Sobolev constants (or positive Ya…
The standard Bonnet-Myers theorem says that if the Ricci scalar of a Riemannian manifold is bounded below by a positive number, then the manifold is compact. Moreover, a bound of its diameter is pointed out. The theorem was extended to Finsler manifolds. In this paper we prove that if a certain condition on the average of the Ricci scalar holds, then the Finsler manifold M is compact if the Ricci scalar is bounded above by the same positive number. An upper bound of the diameter is also found. With no condition on Ricci scalar itself but with a different one on its average, we find that the Fi…
In this survey article, we discuss some topics on self-similar solutions to the Ricci flow and the mean curvature flow. Self-similar solutions to the Ricci flow are known as Ricci solitons. In the first part of this paper we discuss a lower diameter bound for compact manifolds with shrinking Ricci solitons. Such a bound can be obtained from an eigenvalue estimate for a twisted Laplacian, called the Witten-Laplacian. In the second part we discuss self-similar solutions to the mean curvature flow on cone manifolds. Many results have been obtained for solutions in $\bfR^n$ or $\bfC^n$. We see tha…
Spectral comparison results for the $N$-Bakry-Emery Ricci tensor
本文研究了 $N$-Bakry-Emery Ricci 张量在谱意义下具有正下界时的几何比较问题，建立了直径和全局加权体积比较结果。
In this paper we give bounds for the first eigenvalue of the conformal Laplacian and the Yamabe invariant of a compact Riemannian manifold, by using conditions on the Ricci curvature and the diameter and deduce certain conditions on the manifold to be conformal to a sphere.
We prove a parametrized compactness theorem on manifolds of bounded Ricci curvature, upper bounded diameter and lower bounded injectivity radius.
Ricci Flow on Weighted Digraphs with Balancing Factor
针对有向图上Ricci流研究不足的问题，本文提出带节点级平衡因子的加权有向图Ricci流公式，证明解的存在唯一性并设计离散算法，数值实验验证其能揭示结构不对称性和动态演化。
We survey some recent developments in the study of collapsing Riemannian manifolds with Ricci curvature bounded below, especially the locally bounded Ricci covering geometry and the Ricci flow smoothing techniques. We then prove that if a Calabi-Yau manifold is sufficiently volume collapsed with bounded diameter and sectional curvature, then it admits a Ricci-flat Kähler metrictogether with a compatible pure nilpotent Killing structure: this is related to an open question of Cheeger, Fukaya and Gromov.
On the long time behavior of ancient homogeneous Ricci flows
本文研究古老均匀里奇流的长时间行为，证明了其通过缩小序列收敛到梯度缩小里奇溶子的性质。
In this paper we give a diameter bound for Sasaki manifolds with positive transverse Ricci curvature. As an application, we obtain the uniqueness of Sasaki-Einstein metrics on compact Sasaki manifolds modulo the action of the identity component of the automorphism group for the transverse holomorphic structure.
In this paper, we prove the compactness theorem for gradient Ricci solitons. Let $(M_α, g_α)$ be a sequence of compact gradient Ricci solitons of dimension $n\geq 4$, whose curvatures have uniformly bounded $L^{\frac{n}{2}}$ norms, whose Ricci curvatures are uniformly bounded from below with uniformly lower bounded volume and with uniformly upper bounded diameter, then there must exists a subsequence $(M_α, g_α)$ converging to a compact orbifold $(M_{\infty}, g_{\infty})$ with finitly many isolated singularities, where $g_{\infty}$ is a gradient Ricci soliton metric in an orbifold sense.
Notes on scalar curvature lower bounds of steady gradient Ricci solitons
本文研究了稳态梯度瑞奇流的标量曲率衰减估计及流形直径上界，利用Gromov引入的μ-气泡方法进行证明。
We investigate analytic and geometric implications of non-constant Ricci curvature bounds. We prove a Lichnerowicz eigenvalue estimate and finiteness of the fundamental group assuming that $L+2 Ric$ is a positive operator where $L$ is the graph Laplacian. Assuming that the negative part of the Ricci curvature is small in Kato sense, we prove diameter bounds, elliptic Harnack inequality and Buser inequality. This article seems to be the first one establishing these results while allowing for some negative curvature.
Ollivier-Ricci Curvature of Riemannian Manifolds and Directed Graphs with Applications to Graph Neural Networks
本文探讨了奥利维耶-里茨奇曲率与黎曼流形经典里茨奇曲率的联系，扩展了Bonnet-Myers等理论，并应用于图神经网络和网络科学算法。
For a fat sub-Riemannian structure, we introduce three canonical Ricci curvatures in the sense of Agrachev-Zelenko-Li. Under appropriate bounds we prove comparison theorems for conjugate lengths, Bonnet-Myers type results and Laplacian comparison theorems for the intrinsic sub-Laplacian. As an application, we consider the sub-Riemannian structure of $3$-Sasakian manifolds, for which we provide explicit curvature formulas. We prove that any complete $3$-Sasakian structure of dimension $4d+3$, with $d>1$, has sub-Riemannian diameter bounded by $π$. When $d=1$, a similar statement holds under add…
In this paper we prove a new Myers' type diameter estimate on a complete connected Reimannian manifold which admits a bounded vector field such that the Bakry-Émery Ricci tensor has a positive lower bound. The result is sharper than previous Myers' type results. The proof uses the generalized mean curvature comparison applied to the excess function instead of the classical second variation of geodesics.
We consider the Kähler Ricci flow on a smooth minimal model of general type, we show that if the Ricci curvature is uniformly bounded below along the Kähler-Ricci flow, then the diameter is uniformly bounded. As a corollary we show that under the Ricci curvature lower bound assumption, the Gromov-Hausdorff limit of the flow is homeomorphic to the canonical model. Moreover, we can give a purely analytic proof of a recent result of Tosatti-Zhang (\cite{TZ}) that if the canonical line bundle $K_X$ is big and nef, but not ample, then the flow is of Type IIb.
In this note we consider versions of both Ricci and sectional curvature pinching for Riemannian manifold with density. In the Ricci curvature case the main result implies a diameter estimate that is new even for compact shrinking Ricci solitons. In the case of sectional curvature we prove a new sphere theorem.
Local Topology of Riemannian Manifolds with Lower Intermediate Ricci Curvature Bounds
本文证明了在体积、直径和中间里奇曲率下界条件下，闭流形局部贝蒂数的消失定理，并推广至开流形的全局贝蒂数。
On closed Riemannian manifolds with Bakry-Émery Ricci curvature bounded from below and bounded gradient of the potential function, we obtain lower bounds for all positive eigenvalues of the Beltrami-Laplacian instead of the drifted Laplacian. The lower bound of the $k$th eigenvalue depends on $k$, Bakry-Émery Ricci curvature lower bound, the gradient bound of the potential function, and the dimension and diameter upper bound of the manifold, but the volume of the manifold is not involved. Especially, these results apply to closed manifolds with Ricci curvature bounded from below.
In this paper, we classify graphs with nonnegative Lin-Lu-Yau-Ollivier Ricci curvature, maximum degree at most 3 and diameter at least 6.
We show that Perelman's W-functional can be generalized to Sasaki-Ricci flow. When the basic first Chern class is positive, we prove a uniform bound on the scalar curvature, the diameter and a uniform $C^1$ bound for the transverse Ricci potential along the Sasaki-Ricci flow, which generalizes Perelman's results Kahler-Ricci flow to the Sasakian setting. We also show that the positivity of transverse of holomorphic bisectional curvature is preserved along the flow, using the methods and the results proved by Bando and Mok in Kahler setting. In particular, we show that the Sasaki-Ricci flow wou…
For collapsing sequences of Riemannian manifolds which satisfy a uniform lower Ricci curvature bound it is shown that there is a sequence of scales such that for a set of good base points of large measure the pointed rescaled manifolds subconverge to a product of a Euclidean and a compact space. All Euclidean factors have the same dimension, all possible compact factors satisfy the same diameter bounds and their dimension does not depend on the choice of the base point (along a fixed subsequence).
We survey all results concerning the topology of complete noncompact Riemannian manifolds with nonnegative Ricci curvature that have no additional conditions other than restrictions to the dimension, volume growth or diameter growth of the manifold. We will also present relevant examples and list open problems.
The optimal diameter estimate for positive Yamabe metrics
本文证明了连通闭流形上正 Yamabe 度量的最优直径估计，是 Myers 和 Cheng 直径定理的标量曲率版本。
We prove precompactness in an orbifold Cheeger-Gromov sense of complete gradient Ricci shrinkers with a lower bound on their entropy and a local integral Riemann bound. We do not need any pointwise curvature assumptions, volume or diameter bounds. In dimension four, under a technical assumption, we can replace the local integral Riemann bound by an upper bound for the Euler characteristic. The proof relies on a Gauss-Bonnet with cutoff argument.
Lu-Minguzzi-Ohta have introduced the notion of a lower $N$-weighted Ricci curvature bound with $\varepsilon$-range, and derived several comparison geometric estimates from a Laplacian comparison theorem for weighted Laplacian. The aim of this paper is to investigate various rigidity phenomena for the equality case of their comparison geometric results. We will obtain rigidity results concerning the Laplacian comparison theorem, diameter comparisons, and volume comparisons. We also generalize their works for non-symmetric Laplacian induced from vector field potential.
In this paper, we introduce a new notion for lower bounds of Ricci curvature on Alexandrov spaces, and extend Cheeger-Gromoll splitting theorem and Cheng's maximal diameter theorem to Alexandrov spaces under this Ricci curvature condition.
We define the orthogonal Bakry-Émery tensor as a generalization of the orthogonal Ricci curvature, and then study diameter theorems on Kähler and quaternionic Kähler manifolds under positivity assumption on the orthogonal Bakry-Émery tensor. Moreover, under such assumptions on the orthogonal Bakry-Émery tensor and the holomorphic or quaternionic sectional curvature on a Kähler manifold or a quaternionic Kähler manifold respectively, the Bonnet-Myers type diameter bounds are sharper than in the Riemannian case.
We prove diameter bounds for graphs having positive Ricci-curvature bound in Bakry-Emery sense. One result using only curvature and maximal vertex degree is sharp in case of hypercubes. The other result depends on an additional dimension bound, but is independent of the vertex degree. In particular, the second result is the first Bonnet-Myers type theorem for unbounded graph Laplacians. Moreover, our results improve diameter bounds from [6] and [10].
Comparison Theorems and the Intermediate Ricci Curvature Assumption
本文进一步研究了 m-中间 Ricci 曲率假设，证明了在非负 m-中间 Ricci 曲率及稳定加权切片条件下，最后一切片在谱意义下几乎非负，并给出了此类流形中切片直径与内径界的比较定理。
We give an estimate on the lower bound of the first non-zero eigenvalue of the Laplacian for a closed Riemannian manifold with positive Ricci curvature in terms of the in-diameter and the lower bound of the Ricci curvature.
We show that for a noncollapsing sequence of closed, connected, oriented Riemannian manifolds with Ricci curvature uniformly bounded from below and diameter uniformly bounded above, Gromov-Hausdorff convergence essentially agrees with intrinsic flat convergence.
Our aim in this article is to give a lower bound of the diameter of a compact gradient $ρ$-Einstein soliton satisfying some given conditions. We have also deduced some conditions of the gradient $ρ$-Einstein soliton with bounded Ricci curvature to become non-shrinking and non-expanding. Further, we have proved that a complete non-compact gradient shrinking or expanding Schouten soliton with non-constant potential and a boundedness condition on scalar curvature must be non-parabolic.
We give new estimates on the lower bounds for the first closed or Neumann eigenvalue for a compact manifold with positive Ricci curvature in terms of the diameter and the lower bound of Ricci curvature. The results improve the previous estimates.
Kummer-type constructions of almost Ricci-flat 5-manifolds
本文利用Kummer型方法构造了一个单连通的光滑闭几乎Ricci平坦非自旋5-流形，并证明了其最小体积为零且在截面曲率有界时发生坍缩。
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。