Small manufacturing-tolerant photonic crystal cavities are systematically designed using topology optimization to enhance the ratio between quality factor and mode volume, Q/V. For relaxed manufacturing tolerance, a cavity with bow-tie shape is obtained which confines light beyond the diffraction limit into a deep-subwavelength volume. Imposition of a small manufacturing tolerance still results in efficient designs, however, with diffraction-limited confinement. Inspired by numerical results, an elliptic ring grating cavity concept is extracted via geometric fitting. Numerical evaluations demonstrate that for small sizes, topology-optimized cavities enhance the Q/V-ratio by up to two orders of magnitude relative to standard L1 cavities and more than one order of magnitude relative to shape-optimized L1 cavities. An increase in cavity size can enhance the Q/V-ratio by an increase of the Q-factor without significant increase of V. Comparison between optimized and reference cavities illustrates that significant reduction of V requires big topological changes in the cavity.
We present design guidelines for realizing side-coupled photonic crystal nanobeam (PCN) cavities with efficient coupling to low order resonances through adjusting the overlap of the PCN cavity mode and a feeding bus waveguide in both physical and k-space. We show that optimal side-coupled configurations function at a non-zero k-vector offset between the bus waveguide and PCN cavity modes. The straightforward design of side-coupled PCNs with high contrast resonances opens the door to their practical implementation in multiplexed, on-chip photonic devices.
Crystal-symmetry-protected photonic topological edge states (PTESs) based on air rods in conventional dielectric materials are designed as photonic topological waveguides (PTWs) coupled with side optical cavities. We demonstrate that the cavity coupled with the PTW can change the reflection-free transport of the PTESs, where the cavities with single mode and twofold degenerate modes are taken as examples. The single-mode cavities are able to perfectly reflect the PTESs at their resonant frequencies, forming a dip in the transmission spectra. The dip full width at half depth depends on the coup…
Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, mainly consisting of metallic bow-tie antennas, the plasmonic gap sizes defined by lithography in a repeatable way are limited to minimum values \approx 10 nm. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as gaps smaller than 1 nm can be created. Here, we design a hybrid…
We reveal a triangular-lattice planar photonic crystal supports Bloch modes with radially and azimuthally symmetric electric field distributions at the top band-edge of the first photonic band. Bifurcated from the corresponding Bloch modes, two cylindrical vector resonant modes are achieved by simply enlarging the central air-hole of the planar photonic crystal, which have high quality factors around 3,000 and small mode volume. The far-field radiations of the two resonant modes present high-quality cylindrical vector beam profiles. The resonant modes could be optimized by modifying the six ne…
Inverse-Designed High-Q and Small-Mode-Volume Silicon Nitride Photonic Crystal Cavities for Second- and Third-Harmonic Generation
NTT Nanophotonics Center, NTT, Inc.（NTT公司纳米光子学中心）；Basic Research Laboratories, NTT, Inc.（NTT公司基础研究实验室）；International Center for Elementary Particle Physics, University of Tokyo（东京大学国际基本粒子物理中心）；Device Technology Laboratories, NTT, Inc.（NTT公司器件技术实验室）；Institute of Science Tokyo（东京科学大学）
The realization of topological edge states (TESs) in photonic systems has provided unprecedented opportunities for manipulating light in novel manners. The Su-Schrieffer-Heeger (SSH) model has recently gained significant attention and has been exploited in a wide range of photonic platforms to create TESs. We develop a photonic topological insulator strategy based on SSH photonic crystal nanobeam cavities. In contrast to the conventional photonic SSH schemes which are based on alternately tuned coupling strength in one-dimensional lattice, our proposal provides higher flexibility and allows ta…
We report on nonlinear frequency conversion from the telecom range via second harmonic generation (SHG) and third harmonic generation (THG) in suspended gallium nitride slab photonic crystal (PhC) cavities on silicon, under continuous-wave resonant excitation. Optimized two-dimensional PhC cavities with augmented far-field coupling have been characterized with quality factors as high as 4.4$\times10^{4}$, approaching the computed theoretical values. The strong enhancement in light confinement has enabled efficient SHG, achieving normalized conversion efficiency of 2.4$\times10^{-3}$ $W^{-1}$, …
In this paper, by cascading several bichromatic photonic crystals we demonstrate that the quality factor can be much larger compared with that in an isolated cavity without increasing the total size of the device. We take lithium niobate photonic crystal as an example to illustrate that the simulated quality factor of the cascaded cavity can attain 10^5 with a 70° slant angle, which is an order of magnitude larger than that in isolated cavity. The device can be fabricated easily by current etching technique for lithium niobate. We have fabricated the proposed device experimentally including ho…
We present a novel differential refractive index sensor based on arrays of photonic molecules (PM) of dielectric cylinders and two structural defect cavities. The transmission spectrum of the photonic proposed structure as sensor shows a wide photonic stop band with two localized states. One of them, the reference state, is bound to a decagonal ring of cylinders and the other, the sensing state, to the defect cavities of the lattice. It is shown that defect mode is very sensitive to the presence of materials with dielectric permittivity different from that of the surrounding cylinders while th…
Unveiling spin-orbital angular momentum locking in photonic Dirac vortex cavities
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；University of Science and Technology of China（中国科学技术大学）；Suzhou Institute for Advanced Research, University of Science and Technology of China（中国科学技术大学苏州高等研究院）；Soochow University（苏州大学）；The University of Hong Kong（香港大学）；Taiyuan University of Technology（太原理工大学）
Topological photonic cavities based on dissimilar Bragg gratings
Universidad de Málaga（马拉加大学）；CNRS, Université Paris-Saclay（法国国家科学研究中心，巴黎萨克雷大学）；Adelaide University（阿德莱德大学）；National Research Council Canada（加拿大国家研究委员会）
Effective cavities can be optically-induced in atomic media and employed to strengthen optical nonlinearities. Here we study the integration of induced cavities with a photonic quantum gate based on Rydberg blockade. Accounting for loss in the atomic medium, we calculate the corresponding finesse and gate infidelity. Our analysis shows that the conventional limits imposed by the blockade optical depth are mitigated by the induced cavity in long media, thus establishing the total optical depth of the medium as a complementary resource.
Building reliable 3D photonic integrated circuits and cavities at the wafer scale
Department of Electrical and Computer Engineering and State Key Laboratory of Optical Quantum Materials, The University of Hong Kong（香港大学电气与计算机工程系及光学量子材料国家重点实验室）
