We present the design of mid-infrared and THz quantum cascade laser cavities formed from planar photonic crystals with a complete in-plane photonic bandgap. The design is based on a honeycomb lattice, and achieves a full in-plane photonic gap for transverse-magnetic polarized light while preserving a connected pattern for efficient electrical injection. Candidate defects modes for lasing are identified. This lattice is then used as a model system to demonstrate a novel effect: under certain conditions - that are typically satisfied in the THz range - a complete photonic gap can be obtained by the sole patterning of the top metal contact. This possibility greatly reduces the required fabrication complexity and avoids potential damage of the semiconductor active region.
We propose and analyze a new type of a resonant high-Q cavity for lasing, sensing or filtering applications, which is based on a surface states of a finite photonic crystal. We demonstrate that such the cavity can have a Q factor comparable with that one of conventional photonic band-gap defect mode cavities. At the same time, the distinguished feature of the surface mode cavity is that it is situated directly at the surface of the photonic crystal. This might open up new possibilities for design of novel photonic devices and integration of photonic circuits.
In this paper we study and design quasi-2D optomechanical crystals, waveguides, and resonant cavities formed from patterned slabs. Two-dimensional periodicity allows for in-plane pseudo-bandgaps in frequency where resonant optical and mechanical excitations localized to the slab are forbidden. By tailoring the unit cell geometry, we show that it is possible to have a slab crystal with simultaneous optical and mechanical pseudo-bandgaps, and for which optical waveguiding is not compromised. We then use these crystals to design optomechanical cavities in which strongly interacting, co-localized …
A silicon-compatible light source is the final missing piece for completing high-speed, low-power on-chip optical interconnects. In this paper, we present a germanium-based light emitter that encompasses all the aspects of potential low-threshold lasers: highly strained germanium gain medium, strain-induced pseudo-heterostructure, and high-Q optical cavity. Our light emitting structure presents greatly enhanced photoluminescence into cavity modes with measured quality factors of up to 2,000. The emission wavelength is tuned over more than 400 nm with a single lithography step. We find increase…
We demonstrate second harmonic generation in photonic crystal cavities in (001) and (111)B oriented GaAs. The fundamental resonance is at 1800 nm, leading to second harmonic below the GaAs bandgap. Below-bandgap operation minimizes absorption of the second harmonic and two photon absorption of the pump. Photonic crystal cavities were fabricated in both orientations at various in-plane rotations of the GaAs substrate. The rotation dependence and farfield patterns of the second harmonic match simulation. We observe similar maximum efficiencies of 1.2 %/W in (001) and (111)B oriented GaAs.
In a recent investigation, we studied two-dimensional point-defected photonic bandgap cavities composed of dielectric rods arranged according to various representative periodic and aperiodic lattices, with special emphasis on possible applications to particle acceleration (along the longitudinal axis). In this paper, we present a new study aimed at highlighting the possible advantages of using hybrid structures based on the above dielectric configurations, but featuring metallic rods in the outermost regions, for the design of extremely-high quality factor, bandgap-based, accelerating resonato…
The majority of sources of coherent optical radiation rely on laser oscillators driven by population inversion. Despite their technological importance in communications, medicine, industry, and other fields, it remains a challenge to access the spectral range of 0.1-10 THz (the "terahertz gap"), a frequency band for applications ranging from spectroscopy to security and high-speed wireless communications. Here, we propose a way to produce coherent radiation spanning the THz gap by efficient second-harmonic generation (SHG) in low-loss dielectric structures, starting from technologically mature…
We propose a radiation source based on a magnetic mirror cavity. Relativistic electrons are simulated entering the cavity and their trajectories and resulting emission spectra are calculated. The uniformity of the particle orbits is found to result in a frequency comb in terahertz range, the precise energies of which are tuneable by varying the electron's $γ$-factor. For very high energy particles radiation friction causes the spectral harmonics to broaden and we suggest this as a possible way to verify competing classical equations of motion.
Electromagnetic resonators, which are based on optical cavities or electronic circuits, are key elements to enhance and control light-matter interaction. In the THz range, current optical cavities exhibit very high-quality factors with $(λ/2)^3$ mode volumes limited by diffraction, whereas resonant electronic circuits show low quality factor but provide strong subwavelength effective volume ($10^{-6} λ^3$). To overcome the limitations of each type of resonator, great efforts are being devoted to improving the performances of current methods or to the emergence of original approaches. Here, we …
Monolayers of transition metal dichalcogenides are semiconducting materials which offer many prospects in optoelectronics. A monolayer of molybdenum disulfide (MoS2) has a direct bandgap of 1.88 eV. Hence, when excited with optical photon energies below its bandgap, no photocarriers are generated and a monolayer of MoS2 is not of much use in either photovoltaics or photodetection. Here, we demonstrate that large size MoS2 monolayer sandwiched between two graphene layers makes this heterostructure optically active well below the band gap of MoS2. An ultrafast optical pump-THz probe experiment r…
We demonstrate high optical quality factors in aluminum nitride (AlN) photonic crystal nanobeam cavities. Suspended AlN photonic crystal nanobeams are fabricated in sputter-deposited AlN-on-insulator substrates using a self-protecting release process. Employing one-dimensional photonic crystal cavities coupled to integrated optical circuits we measure quality factors up to 146,000. By varying the waveguide-cavity coupling gap, extinction ratios in excess of 15 dB are obtained. Our results open the door for integrated photonic bandgap structures made from a low loss, wide-transparency, nonlinea…
A Bragg waveguide-based resonant fluidic sensor operating in THz band is studied. A fused deposition modeling 3D printing technique is employed to fabricate the sensor where the liquid analyte is flowing in the microfluidic channel integrated into the waveguide cladding. The analyte refractive index-dependent resonant defect state supported by the fluidic channel is probed by tracking the resulting absorption dip and phase change of the core-guided mode on waveguide transmission spectra. The proposed fluidic sensor can open new opportunities in applied chemical and biological sensing as it off…
Topological photonic cavities based on dissimilar Bragg gratings
Universidad de Málaga（马拉加大学）；CNRS, Université Paris-Saclay（法国国家科学研究中心，巴黎萨克雷大学）；Adelaide University（阿德莱德大学）；National Research Council Canada（加拿大国家研究委员会）
Cerenkov radiation from cavities have been analyzed by quantum electrodynamic theory. Analytical expressions of some basic radiation properties including Einstein's $A$ and $B$ coefficients are derived and shown to be directly modified by the cavities. Coherent and incoherent radiations are analyzed with the aim of generating THz radiation from the devices.
Compact and low-loss photonic crystal waveguides are critical in integrated terahertz (THz) applications. Compared with pure metal or dielectric photonic crystal waveguides, hybrid (metal-dielectric) integrated waveguides provide a simple way to further improve the field confinement and the propagation loss. In this work, we investigate a hybrid waveguide consisting of metallic photonic crystals and dielectric films in 0.1-1.0 THz. Photonic crystal waveguides based on metal pillar arrays (MPAs) support two resonance modes including the fundamental and high-order transverse magnetic (TM) modes …
In this Letter, we present a study of the confinement properties of point-defect resonators in finite-size photonic-bandgap structures composed of aperiodic arrangements of dielectric rods, with special emphasis on their use for the design of cavities for particle accelerators. Specifically, for representative geometries, we study the properties of the fundamental mode (as a function of the filling fraction, structure size, and losses) via 2-D and 3-D full-wave numerical simulations, as well as microwave measurements at room temperature. Results indicate that, for reduced-size structures, aper…
Gallium phosphide offers an attractive combination of a high refractive index ($n>3$ for vacuum wavelengths up to 4 μm) and a wide electronic bandgap (2.26 eV), enabling optical cavities with small mode volumes and low two-photon absorption at telecommunication wavelengths. Heating due to strongly confined light fields is therefore greatly reduced. Here, we investigate the benefits of these properties for cavity optomechanics. Utilizing a recently developed fabrication scheme based on direct wafer bonding, we realize integrated one-dimensional photonic crystal cavities made of gallium phosphid…
Recent years have witnessed the boom of cavity optomechanics, which exploits the confinement and coupling of optical and mechanical waves at the nanoscale. Amongst their physical implementations, optomechanical (OM) crystals built on semiconductor slabs enable the integration and manipulation of multiple OM elements in a single chip and provide GHz phonons suitable for coherent phonon manipulation. Different demonstrations of coupling of infrared photons and GHz phonons in cavities created by inserting defects on OM crystals have been performed. However, the considered structures do not show a…
Defect cavities in 3D photonic crystal can trap and store light in the smallest volumes allowable in dielectric materials, enhancing non-linearities and cavity QED effects. Here, we study inverse rod-connected diamond (RCD) crystals containing point defect cavities using plane-wave expansion and finite-difference time domain methods. By optimizing the dimensions of the crystal, wide photonic band gaps are obtained. Mid-bandgap resonances can then be engineered by introducing point defects in the crystal. We investigate a variety of single spherical defects at different locations in the unit ce…
Unique optical properties of colloidal semiconductor quantum dots (QDs), arising from quantum mechanical confinement of charge within these structures, present a versatile testbed for the study of how high electric fields affect the electronic structure of nanostructured solids. Earlier studies of quasi-DC electric field modulation of QD properties have been limited by the electrostatic breakdown processes under the high externally applied electric fields, which have restricted the range of modulation of QD properties. In contrast, in the present work we drive CdSe:CdS core:shell QD films with…
We propose a scheme for efficient cavity-enhanced nonlinear THz generation via difference-frequency generation (DFG) processes using a triply resonant system based on photonic crystal cavities. We show that high nonlinear overlap can be achieved by coupling a THz cavity to a doubly-resonant, dual-polarization near-infrared (e.g. telecom band) photonic-crystal nanobeam cavity, allowing the mixing of three mutually orthogonal fundamental cavity modes through a chi(2) nonlinearity. We demonstrate through coupled-mode theory that complete depletion of the pump frequency - i.e., quantum-limited con…
The engineering of localised modes in photonic structures is one of the main targets of modern photonics. An efficient strategy to design these modes is to use the interplay of constructive and destructive interference in periodic photonic lattices. This mechanism is at the origin of defect modes in photonic bandgaps, bound states in the continuum and compact localised states in flat bands. Here we show that in lattices of lossy resonators, the addition of external optical drives with controlled phase enlarges the possibilities of manipulating interference effects and allows designing novel ty…
We report the optimisation of optical properties of single defects in three-dimensional (3D) face-centred-cubic (FCC) woodpile photonic crystal (PC) cavities by using plane-wave expansion (PWE) and finite-difference time-domain (FDTD) methods. By optimising the dimensions of a 3D woodpile PC, wide photonic band gaps (PBG) are created. Optical cavities with resonances in the bandgap arise when point defects are introduced in the crystal. Three types of single defects are investigated in high refractive index contrast (Gallium Phosphide-Air) woodpile structures and Q-factors and mode volumes ($V…
Second harmonic generation in nonlinear materials can be greatly enhanced by realizing doubly-resonant cavities with high quality factors. However, fulfilling such doubly resonant condition in photonic crystal (PhC) cavities is a long-standing challenge, because of the difficulty in engineering photonic bandgaps around both frequencies. Here, by implementing a second-harmonic bound state in the continuum (BIC) and confining it with a heterostructure design, we show the first doubly-resonant PhC slab cavity with $2.4\times10^{-2}$ W$^{-1}$ conversion efficiency under continuous wave excitation.…
When the feature size of photonic structures becomes comparable or even smaller than the wavelength of light, the fabrication imperfections inevitably introduce disorder that may eliminate many functionalities of subwavelength photonic devices. Here we suggest a novel concept to achieve a robust bandgap which can endure disorder beyond 30 as a result of the transition from photonic crystals to Mie-resonant metamaterials. By utilizing Mie-resonant metamaterials with high refractive index, we demonstrate photonic waveguides and cavities with strong robustness to position disorder, thus providing…
The negatively charged silicon monovacancy $V_{Si}^-$ in 4H-silicon carbide (SiC) is a spin-active point defect that has the potential to act as a qubit or quantum memory in solid-state quantum computation applications. Photonic crystal cavities (PCCs) can augment the optical emission of the $V_{Si}^-$, yet fine-tuning the defect-cavity interaction remains challenging. We report on two post-fabrication processes that result in enhancement of the $V_1^{'}$ optical emission from our 1-dimensional PCCs, indicating improved coupling between the ensemble of silicon vacancies and the PCC. One proces…
We present a silicon optomechanical nanobeam design with a dynamically tunable acoustic mode at 10.2 GHz. The resonance frequency can be shifted by 90 kHz/V^2 with an on-chip capacitor that was optimized to exert forces up to 1 $μ$N at 10 V operation voltage. Optical resonance frequencies around 190 THz with Q factors up to $2.2 \times 10^6$ place the structure in the well-resolved sideband regime with vacuum optomechanical coupling rates up to $g_0/2π= 353$ kHz. Tuning can be used, for instance, to overcome variation in the device-to-device acoustic resonance frequency due to fabrication erro…
Confining photons in a finite volume is in high demand in modern photonic devices. This motivated decades ago the invention of photonic crystals, featured with a photonic bandgap forbidding light propagation in all directions. Recently, inspired by the discoveries of topological insulators (TIs), the confinement of photons with topological protection has been demonstrated in two-dimensional (2D) photonic structures known as photonic TIs, with promising applications in topological lasers and robust optical delay lines. However, a fully three-dimensional (3D) topological photonic bandgap has nev…
We first experimentally demonstrated a transverse magnetic (TM) mode laser in a Photonic crystal (PhC) slab structure at room temperature. This study proposes a PhC nanobeam (NB) cavity to support a high-quality-factor (Q-factor) TM mode. For a large and complete photonic bandgap, the PhC NB structures consist of large air holes in a thick dielectric slab. The PhC NB cavity was optimized numerically for a high-Q-factor TM mode of over 1,000,000 by reducing the radii of the air holes quadratically from the center to the edge of the PhC NB. A single TM mode lasing action was observed in an InGaA…
We present analytical and numerical study of photonic lattice with short- and long-range harmonic modulations of the refractive index. Such structures can be prepared experimentally with holographic photolithography. In the spectral region of photonic bandgap of the underlying single-periodic crystal, we observe a series of bands with anomalously small dispersion. The related slow-light effect is attributed to the long-range modulation in the photonic lattice, that leads to formation of an array of evanescently-coupled high-$Q$ cavities. The band structure of the lattice is studied with severa…
Future information technology demands ultimately fast, low-loss quantum control. Intense light fields have facilitated important milestones, such as inducing novel states of matter, accelerating electrons ballistically, or coherently flipping the valley pseudospin. These dynamics leave unique signatures, such as characteristic bandgaps or high-order harmonic radiation. The fastest and least dissipative way of switching the technologically most important quantum attribute - the spin - between two states separated by a potential barrier is to trigger an all-coherent precession. Pioneering experi…
Optically-Induced Modulation and Programming of Diamond Photonic Cavities
Institute of Physics, Swiss Federal Institute of Technology Lausanne (EPFL)（洛桑联邦理工学院物理研究所）；Center of Quantum Science and Engineering, Swiss Federal Institute of Technology Lausanne (EPFL)（洛桑联邦理工学院量子科学与工程中心）；Photonics Research Group, Department of Information Technology (INTEC), Ghent University - IMEC（根特大学信息技朮系光子研究组（与IMEC联合））；University of Stuttgart（斯图加特大学）
Ultrastable lasers: investigations of crystalline mirrors and closed cycle cooling at 124 K
Physikalisch-Technische Bundesanstalt (PTB)（德国联邦物理技术研究院）；JILA, National Institute of Standards and Technology and University of Colorado（美国国家标准与技术研究院与科罗拉多大学联合物理研究所）
The ultrafast scattering dynamics of intersubband polaritons in dispersive cavities embedding GaAs/AlGaAs quantum wells are studied directly within their band structure using a non-collinear pump-probe geometry with phase-stable mid-infrared pulses. Selective excitation of the lower polariton at a frequency of ~25 THz and at a finite in-plane momentum, $k_{||}$, leads to the emergence of a narrowband maximum in the probe reflectivity at $k_{||}=0$. A quantum mechanical model identifies the underlying microscopic process as stimulated coherent polariton-polariton scattering. These results mark …
The concept of the Brillouin zone (BZ) in relation to a photonic crystal fabricated in an optically anisotropic material is explored both experimentally and theoretically. In experiment, we used femtosecond laser pulses to excite THz polaritons and image their propagation in lithium niobate and lithium tantalate photonic crystal (PhC) slabs. We directly measured the dispersion relation inside PhCs and observed that the lowest bandgap expected to form at the BZ boundary forms inside the BZ in the anisotropic lithium niobate PhC. Our analysis shows that in an anisotropic material the BZ - define…
Self-heterodyne fiber interferometers have been shown to be capable of stabilizing lasers to ultra-narrow linewidths and present an excellent alternative to high finesse cavities for frequency stabilization. In addition to suppressing frequency noise, these devices are highly tunable, and can be manipulated to produce high speed frequency sweeps over the entire range of the laser. We present an analytic approach for choosing a delay-line length for both optimal noise suppression and highest in-loop frequency sweep rate. Using this model we have implemented a fiber-based active Michelson interf…
Gallium phosphide (GaP) is an indirect bandgap semiconductor used widely in solid-state lighting. Despite numerous intriguing optical properties---including large $χ^{(2)}$ and $χ^{(3)}$ coefficients, a high refractive index ($>3$), and transparency from visible to long-infrared wavelengths ($0.55-11\,μ$m)---its application as an integrated photonics material has been little studied. Here we introduce GaP-on-insulator as a platform for nonlinear photonics, exploiting a direct wafer bonding approach to realize integrated waveguides with 1.2 dB/cm loss in the telecommunications C-band (on par wi…
