Electromagnetic properties of polycrystalline diamond from 35K to room temperature and microwave to terahertz frequencies
Jean-Michel Le Floch, Romain Bara, John G. Hartnett, Michael E. Tobar, David Mouneyrac, Damien Passerieux, Dominique Cros, Jerzy Krupka, Philippe Goy, Sylvain Caroopen
备注：
6 pages, 7 figures, 1 table, journal article
发表信息：
JOURNAL OF APPLIED PHYSICS Volume: 109 Issue: 9 Article Number: 094103 Published: MAY 1 2011
Dielectric resonators are key components for many microwave and millimetre wave applications, including high-Q filters and frequency-determining elements for precision frequency synthesis. These often depend on the quality of the dielectric material. The commonly used material for building the best cryogenic microwave oscillators is sapphire. However sapphire is becoming a limiting factor for higher frequencies design. It is then important to find new candidates that can fulfil the requirements for millimetre wave low noise oscillators at room and cryogenic temperatures. These clocks are used as a reference in many fields, like modern telecommunication systems, radio astronomy (VLBI), and precision measurements at the quantum limit. High-resolution measurements were made of the temperature-dependence of the electromagnetic properties of a polycrystalline diamond disk at temperatures between 35 K and 330 K at microwave to sub-millimetre wave frequencies. The cryogenic measurements were made using a TE01δ dielectric mode resonator placed inside a vacuum chamber connected to a single-stage pulse-tube cryocooler. The high frequency characterization was performed at room temperature using a combination of a quasi-optical two-lens transmission setup, a Fabry-Perot cavity and a whispering gallery mode resonator excited with waveguides. Our CVD diamond sample exhibits a decreasing loss tangent with increasing frequencies. We compare the results with well known crystals. This comparison makes clear that polycrystalline diamond could be an important material to generate stable frequencies at millimetre waves.
The letter introduces a diagram that rationalizes tunneling atomic force microscopy (TUNA) observations of electron emission from polycrystalline diamonds as described in recent publications. The direct observations of electron emission from grain boundary sites by TUNA could indeed be evidence of electrons originating from grain boundaries under external electric fields. At the same time, from the diagram it follows that TUNA and field emission schemes are complimentary rather than equivalent for results interpretation. It is further proposed that TUNA could provide better insights into emiss…
Polycrystalline diamond films with systematic change in microstructure that varies from microcrystalline to nanocrystalline structure are synthesized on Si by hot filament chemical vapor deposition. The morphology and structural properties of the grown diamond films are analyzed using field emission scanning electron microscope (FESEM), atomic force microscope (AFM), X-ray diffraction and Raman spectroscopy. The average roughness and grain size of the diamond films decrease with increase in CH4 to H2 ratio from 0.5 to 3 %. Also, structural disorder in these diamond films increases with decreas…
We report on wide-field optically detected magnetic resonance imaging of nitrogen-vacancy centers (NVs) in type IIa polycrystalline diamond. These studies reveal a heterogeneous crystalline environment that produces a varied density of NV centers, including preferential orientation within some individual crystal grains, but preserves long spin coherence times. Using the native NVs as nanoscale sensors, we introduce a 3-dimensional strain imaging technique with high sensitivity ( $< 10^{-5}$ Hz$^{-1/2}$) and diffraction-limited resolution across a wide field of view.
The surface topography of diamond coatings strongly affects surface properties such as adhesion, friction, wear, and biocompatibility. However, the understanding of multi-scale topography, and its effect on properties, has been hindered by conventional measurement methods, which capture only a single length scale. Here, four different polycrystalline diamond coatings are characterized using transmission electron microscopy to assess the roughness down to the sub-nanometer scale. Then these measurements are combined, using the power spectral density (PSD), with conventional methods (stylus prof…
In this paper, we describe the modification of Nanoscale Impedance Microscopy (NIM), namely, a combination of contact-mode atomic force microscopy with local impedance measurements. The postulated approach is based on the application of multifrequency voltage perturbation instead of standard frequency-by-frequency analysis, which among others offers more time-efficient and accurate determination of the resultant impedance spectra with high spatial resolution. Based on the impedance spectra analysis with an appropriate electric equivalent circuit, it was possible to map surface resistance and c…
This study investigates the effect of ZrB$_2$ additions on the microstructure, thermal stability, and thermo-mechanical wear behaviour of polycrystalline diamond. Following high-pressure high-temperature (HPHT) sintering, the ZrB$_2$-PCD material showed a full conversion of the binder phase to cobalt-boride (Co2B and Co$_{23}$B$_6$) phases. In-situ PXRD and TEM vacuum annealing experiments observed that the onset of bulk graphitisation occurred above $1000^{\circ}C$ for the ZrB$_2$-PCD material, compared to $850^{\circ}C$ for the STD-PCD material. The ZrB$_2$-PCD tools showed excellent thermo-…
The chemical vapor deposition of polycrystalline diamond (PCD) films is typically done on substrates seeded with diamond nanoparticles. Specular laser reflectance and a continuous film model have been used to monitor the thickness of these films during their deposition. However, most seeds are isolated during the early stages of the deposition, which questions the utility of applying such a continuous film model for monitoring deposition before film formation. In this work, we present a model based on the Rayleigh theory of scattering for laser reflectance at substrates with growing nanodiamon…
Revealing sub-μm inhomogeneities and μm-scale texture in H2O ice at Megabar pressures via sound velocity measurements by time-domain Brillouin scattering
Polycrystalline diamond coatings have been grown on cemented carbide substrates with different aspect ratios by a microwave plasma CVD in methane-hydrogen gas mixtures. To protect the edges of the substrates from non-uniform heating due to the plasma edge effect, a special plateholder with pockets for group growth has been used. The difference in heights of the substrates and plateholder, and its influence on the diamond film mean grain size, growth rate, phase composition and stress was investigated. The substrate temperature range, within which uniform diamond films are produced with good ad…
Nano-polycrystalline diamond (NPD) and nanotwinned diamond (NtD) were successfully synthesized in multi-anvil high pressure apparatus at high pressure and high temperature (HPHT) conditions using precursors of onion carbons. We found that the choices of distinct onion carbons with hollow or multi-cored microstructures lead to the synthesis of different diamond products of NPD or NtD ones. High quality NtD with an average twin size of 6.8 nm has been synthesized whose Vickers hardness reaches as high as 180 GPa as measured by indentation hardness experiment. The existence of stacking faults oth…
A microwave plasma model of a chemical vapour deposition (CVD) reactor is presented for understanding spatial heteroepitaxial growth of polycrystalline diamond on Si. This work is based on the TM0(n>1)p clamshell style reactor (Seki Diamond/ASTEX SDS 6K, Carat CTS6U, ARDIS-100 style) whereby a simplified H_2 plasma model is used to show the radial variation in growth rate over small samples with different sample holders. The model uses several steps: an electromagnetic (EM) eigenfrequency solution, a frequency-transient EM/plasma fluid solution and transient a heat transfer solution at low and…
Radio-Frequency Gasket for Studies of Superconductivity in Diamond Anvil Cells
Center for High Pressure Science & Technology Advanced Research（高压科学前沿技术先进研究中心）；Shanghai Key Laboratory of Material Frontiers Research in Extreme Environments (MFree)（极端环境下材料前沿研究上海市重点实验室（MFree））；Shanghai Advanced Research in Physical Sciences (SHARPS)（上海物理科学先进研究中心（SHARPS））
Ultra-wide bandgap and the absence of shallow dopants are the major challenges in realizing diamond based electronics. However, the surface functionalization offers an excellent alternative to tune electronic structure of diamonds. Herein, we report on tuning the surface electronic properties of hydrogenated polycrystalline diamond films through oxygen functionalization. The hydrogenated diamond (HD) surface transforms from hydrophobic to hydrophilic nature and the sheet resistance increases from ~ 8 kohms/sq. to over 10 Gohms/sq. with progressive ozonation. The conductive atomic force microsc…
We present the frequency-dependant (dynamic) dielectric response of a group of topical polycrystalline zeolitic imidazolate-based metal-organic framework (MOF) materials in the extended infrared spectral region. Using synchrotron-based FTIR spectroscopy in specular reflectance, in conjunction with density functional theory (DFT) calculations, we have revealed detailed structure-property trends linking the THz region dielectric response to framework porosity and structural density. The work demonstrates that MOFs are promising candidate materials not only for low-\k{appa} electronics applicatio…
The maximum output power of GaN-based high-electron mobility transistors is limited by high channel temperature induced by localized self-heating which degrades device performance and reliability. With generated heat fluxes within these devices reaching magnitude close to ten times of that at the sun surface, chemical vapor deposition (CVD) diamond is an attractive candidate to aid in the extraction of this heat in order to keep the operating temperatures of these high power electronics as low as possible. Due to the observed inhomogeneous structure, CVD diamond membranes exhibit a 3D anisotro…
