We report on growth-mode transitions in the growth of SrRuO3 thin films on atomically flat Ti4+ single-terminated SrTiO3 (111) substrates, investigated by reflection high-energy electron diffraction and atomic force microscopy. Over the first ~9 unit cells, the dominant growth mode changes from island to layer-by-layer for the growth rate of 0.074 unit cells/sec and the growth temperature of 700 C. Moreover, in the course of growing SrRuO3 films, the governing growth mode of interest can be manipulated by changing the growth temperature and the growth rate, which change allows for the selection of the desired layer-by-layer mode. The present study thus paves the way for integrations of SrRuO3 thin layers into (111)-orientated oxide heterostructures, and hence multi-functional devices, requiring control of the sharp atomic-level interfaces and the layer-by-layer growth mode.
We employ spin-polarized (SP) STM to study the spin-dependent tunneling between a magnetite (111) sample and an antiferromagnetic tip through a vacuum barrier at room temperature. Atomic scale STM images show significant magnetic contrast corresponding to variations in the local surface states induced by oxygen vacancies. The estimated variations in tunneling magnetoresistance (TMR) of 250% suggest that the spin-transport properties are significantly altered locally by the presence of surface defects.
To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chem…
The surface termination of (100)-oriented LaAlO3 (LAO) single crystals was examined by atomic force microscopy and optimized to produce a single-terminated atomically flat surface by annealing. Then the atomically flat STO film was achieved on a single-terminated LAO substrate, which is expected to be similar to the n-type interface of two-dimensional electron gas (2DEG), i.e., (LaO)-(TiO2). Particularly, that can serve as a mirror structure for the typical 2DEG heterostructure to further clarify the origin of 2DEG. This newly developed interface was determined to be highly insulating. Additio…
We demonstrate high-quality epitaxial germanium (Ge) films on a metallic silicide, Fe3Si, grown directly on a Ge(111) substrate. Using molecular beam epitaxy techniques, we can obtain an artificially controlled arrangement of silicon (Si) or iron (Fe) atoms at the surface on Fe3Si(111). The Si-terminated Fe3Si(111) surface enables us to grow two-dimensional epitaxial Ge films, whereas the Fe-terminated one causes the three-dimensional epitaxial growth of Ge films. The high-quality Ge grown on the Si-terminated surface has almost no strain, meaning that the Ge films are not grown on the low-tem…
We report that a deionized water etching and thermal annealing technique can be effective for preparing atomically-flat and singly-terminated surfaces of single crystalline SrTiO3 substrates. After a two-step thermal-annealing and deionized-water etching procedure, topography measured by atomic force microscopy shows the evolution of substrates from a rough to step-terraced surface structure. Lateral force microscopy confirms that the atomically-flat surfaces are singly-terminated. Moreover, this technique can be used to remove excessive strontium oxide or hydroxide composites segregated on th…
Rh-terminated FeRh(001) film is known to be stable in a ferromagnetic (FM) state different from a G-type antiferromagnetic (G-AFM) bulk ground state, while an Fe-terminated FeRh(001) film has the same ground state as the bulk. In this paper, we investigate the magnetic properties of asymmetrically terminated FeRh(001) films: one surface is Fe-terminated and the other is Rh-terminated. Rh surface only ] (RhSO) FM state in asymmetrically terminated FeRh(001) film is identified to exhibit 40% increased perpendicular MCA energy as compare to that of the whole-layer (WL) FM state. This increased MC…
The initial homoepitaxial growth of SrTiO3 on a (\surd13\times\surd13) - R33.7°SrTiO3(001) substrate surface, which can be prepared under oxide growth conditions, is atomically resolved by scanning tunneling microscopy. The identical (\surd13\times\surd13) atomic structure is clearly visualized on the deposited SrTiO3 film surface as well as on the substrate. This result indicates the transfer of the topmost Ti-rich (\surd13\times\surd13) structure to the film surface and atomic-scale coherent epitaxy at the film/substrate interface. Such atomically ordered SrTiO3 substrates can be applied to …
Topological crystalline insulators have been recently predicted and observed in rock-salt structure SnSe $\{111\}$ thin films. Previous studies have suggested that the Se-terminated surface of this thin film with hydrogen passivation, has a reduced surface energy and is thus a preferred configuration. In this paper, synchrotron-based angle-resolved photoemission spectroscopy, along with density functional theory calculations, are used to demonstrate conclusively that a rock-salt SnSe $\{111\}$ thin film epitaxially-grown on \ce{Bi2Se3} has a stable Sn-terminated surface. These observations are…
Atomically-abrupt interfaces in transition metal oxide (TMO) heterostructures could host a variety of exotic condensed matter phases that may not be found in the bulk materials at equilibrium. A critical step in the development of such atomically-sharp interfaces is the deposition of atomically-smooth TMO thin films. Optimized deposition conditions exist for the growth of perovskite oxides. However, the deposition of rutile oxides, such as VO$_2$, with atomic-layer precision has been challenging. In this work, we used pulsed laser deposition (PLD) to grow atomically-smooth VO$_2$ thin films on…
Atomically thin PtSe2 films have attracted extensive research interests for potential applications in high-speed electronics, spintronics and photodetectors. Obtaining high quality, single crystalline thin films with large size is critical. Here we report the first successful layer-by-layer growth of high quality PtSe2 films by molecular beam epitaxy. Atomically thin films from 1 ML to 22 ML have been grown and characterized by low-energy electron diffraction, Raman spectroscopy and X-ray photoemission spectroscopy. Moreover, a systematic thickness dependent study of the electronic structure i…
The impact of surface vacancies and single adatoms on the magnetic properties of tetragonal {\bf{L1}$_{0}$} CoPt thin films is investigated from first principles. We consider Co and Fe single adatoms deposited on a Pt-terminated thin film while a Pt adatom is assumed to be supported by a Co-terminated film. The vacancy is injected in the top-surface layer of the films with both types of termination. After finding the most stable location of the defects, we discuss their magnetic properties tight to those of the substrate and investigate the magnetic crystalline anisotropy energy (MAE). Previou…
Remote epitaxy is a promising approach for synthesizing exfoliatable crystalline membranes and enabling epitaxy of materials with large lattice mismatch. However, the atomic scale mechanisms for remote epitaxy remain unclear. Here we experimentally demonstrate that GaSb films grow on graphene-terminated GaSb (001) via a seeded lateral epitaxy mechanism, in which pinhole defects in the graphene serve as selective nucleation sites, followed by lateral epitaxy and coalescence into a continuous film. Remote interactions are not necessary in order to explain the growth. Importantly, the small size …
The availability of low-index rutile TiO2 single crystal substrates with atomically flat surfaces is essential for enabling epitaxial growth of rutile transition metal oxide films. The high surface energy of the rutile (001) surface often leads to surface faceting, which precludes the sputter and annealing treatment commonly used for the preparation of clean and atomically flat TiO2(110) substrate surfaces. In this work, we reveal that stable and atomically flat rutile TiO2(001) surfaces can be prepared with an atomically ordered reconstructed surface already during a furnace annealing treatme…
Atomically sharp epitaxial growth of Bi2Se3 films is achieved on Si (111) substrate with MBE (Molecular Beam Epitaxy). Two-step growth process is found to be a key to achieve interfacial-layer-free epitaxial Bi2Se3 films on Si substrates. With a single-step high temperature growth, second phase clusters are formed at an early stage. On the other hand, with low temperature growth, the film tends to be disordered even in the absence of a second phase. With a low temperature initial growth followed by a high temperature growth, second-phase-free atomically sharp interface is obtained between Bi2S…
Perovskite oxides attract increasing attention due to their broad potential in many applications. Understanding their surfaces is challenging, though, because the ternary composition of the bulk allows for multiple stable surface terminations. We demonstrate a simple procedure for preparing the bulk-terminated (001) surface of SrTiO3, a prototypical cubic perovskite. Controlled application of strain on a SrTiO3 single crystal results in a flat cleavage with micrometer-size domains of SrO and TiO2. Distribution of these two terminations is dictated by ferroelectric domains induced by strain dur…
The impact of reduced dimensionality on the magnetic properties of the tetragonal L1$_{0}$ CoPt alloy is investigated from ab-initio considering several kinds of surface defects. By exploring the dependence of the magnetocrystalline anisotropy energy (MAE) on the thickness of CoPt thin films, we demonstrate the crucial role of the chemical nature of the surface. For instance, Pt-terminated thin films exhibit huge MAEs which can be 1000% larger than those of Co-terminated films. Besides the perfect thin films, we scrutinize the effect of defective surfaces such as stacking faults or anti-sites …
Hexagonal boron nitride (h-BN) is a layered two-dimensional material with properties that make it promising as a dielectric in various applications. We report the growth of h-BN films on Ni foils from elemental B and N using molecular beam epitaxy. The presence of crystalline h-BN over the entire substrate is confirmed by Raman spectroscopy. Atomic force microscopy is used to examine the morphology and continuity of the synthesized films. A scanning electron microscopy study of films obtained using shorter depositions offers insight into the nucleation and growth behavior of h-BN on the Ni sub…
In a recent work by Ji Seop Oh et al., BaBiO3(001) thin films were grown on SrTiO3 by Pulsed Laser Deposition. It was argued that the films are BiO2-terminated from the modelling of angle-resolved photoemission spectroscopy experiments. The authors claim, in opposition to previous theoretical predictions, that there are no metallic surface states on their films. In this short comment we question that the authors have enough evidence to make such a claim, as we consider that the large mismatch between SrTiO3 and BaBiO3 and the lack of control of their fabrication process with reflection high en…
Metal-Insulator-Metal tunnel junctions (MIMTJ) are common throughout the microelectronics industry. The industry standard AlOx tunnel barrier, formed through oxygen diffusion into an Al wetting layer, is plagued by internal defects and pinholes which prevent the realization of atomically-thin barriers demanded for enhanced quantum coherence. In this work, we employed in situ scanning tunneling spectroscopy (STS) along with molecular dynamics simulations to understand and control the growth of atomically thin Al2O3 tunnel barriers using atomic layer deposition (ALD). We found that a carefully t…
The surface structure of SrTiO3(001) thin films homoepitaxially grown by PLD in step-flow mode was characterized using low temperature STM. It was found that one-dimensional (1D) TiOx-based nanostructures were formed on the thin film surface and their density increased with increasing thin film thickness. Most of the 1D nanostructures disappeared after a post-deposition annealing, indicating that this structure is metastable due to the nonequilibrium growth mode. The resulting surface after annealing exhibited similar features to that of a thinner film, having a domain structure with (2x1) and…
Ba7Ir3O13+δ in thin film form is discovered. These films are characterized by colossal permittivity (CP) ~104 at room temperature, attributable to the colossal internal barrier layer capacitance effect at atomically thin domain boundaries. These findings suggest a new route to seeking novel CP materials through designing atomically thin domain boundaries.
Transition metal dichalcogenides (TMDCs), together with other two-dimensional (2D) materials have attracted great interest due to the unique optical and electrical properties of atomically thin layers. In order to fulfill their potential, developing large-area growth and understanding the properties of TMDCs have become crucial. Here, we used molecular beam epitaxy (MBE) to grow atomically thin MoSe$_2$ on GaAs(111)B. No intermediate compounds were detected at the interface of as-grown films. Careful optimization of the growth temperature can result in the growth of highly aligned films with o…
We have realized a two-dimensional hole system (2DHS), in which the 2DHS is induced at an atomically flat hydrogen-terminated Si(111) surface by a negative gate voltage applied across a vacuum cavity. Hole densities up to $7.5\times10^{11}$ cm$^{-2}$ are obtained, and the peak hole mobility is about $10^4$ cm$^2$/Vs at 70 mK. The quantum Hall effect is observed. Shubnikov-de Haas oscillations show a beating pattern due to the spin-orbit effects, and the inferred zero-field spin splitting can be tuned by the gate voltage.
To date, the generic polarization of Bernardini, Fiorentini and Vanderbilt (PBFV) has been widely used to address the issue of polarity in III-V nitride semiconductors, but improvements in nitride materials and the performance of optoelectronic devices have been limited. The current first-principles calculation for the electronic structures of nm-scale [0001] GaN films show that the internal electric fields and the band tilt of these films are in opposite direction to those predicted by PBFV. Additionally, it is determined that an intrinsic self-regulated charge transfer across the film limits…
In this paper we demonstrate atomic-scale lithography on hydrogen terminated Ge(001. The lithographic patterns were obtained by selectively desorbing hydrogen atoms from a H resist layer adsorbed on a clean, atomically flat Ge(001) surface with a scanning tunneling microscope tip operating in ultra-high vacuum. The influence of the tip-to-sample bias on the lithographic process have been investigated. Lithographic patterns with feature-sizes from 200 nm to 1.8 nm have been achieved by varying the tip-to-sample bias. These results open up the possibility of a scanning-probe lithography approach…
We report a naturally-occurring two-dimensional material (graphene that can be viewed as a gigantic flat fullerene molecule, describe its electronic properties and demonstrate all-metallic field-effect transistor, which uniquely exhibits ballistic transport at submicron distances even at room temperature.
Comparison between single- and the poly-crystalline structures provides essential information on the role of long-range translational symmetry and grain boundaries. In particular, by comparing single- and poly-crystalline transition metal oxides (TMOs), one can study intriguing physical phenomena such as electronic and ionic conduction at the grain boundaries, phonon propagation, and various domain properties. In order to make an accurate comparison, however, both single- and poly-crystalline samples should have the same quality, e.g., stoichiometry, crystallinity, thickness, etc. Here, by stu…
A route to break molecular nitrogen (N2) under mild conditions is demonstrated by N2 gas cracking on, and incorporation into, lanthanide films. Successful growth of lanthanide nitride thin films, made by evaporation of lanthanides in a partial N2 atmosphere at room temperature and pressure as low as 10-4 Torr, is confirmed using X-ray diffraction. In-situ conductance measurements of pure lanthanide thin films exposed to N2 gas show an immediate surface reaction and a slower bulk reaction. Finally, we report partial reversal of the nitrogen incorporation in a lanthanide nitride by cycling vacuu…
Atomically flat, epitaxial, and stoichiometric thin films of the electronically phase separated compound (La$_{0.5}$Pr$_{0.5}$)$_{0.67}$Ca$_{0.33}$MnO$_{3}$ were grown on as-received and treated NdGaO$_{3}$ substrates by fine tuning of oxygen pressure during deposition. Optimal thin films with step flow growth mode show superior physical properties compared to thin films grown in off-optimal oxygen pressures, {\em viz.} the highest maximum temperature coefficient of resistance, the highest peak-resistivity temperature, and reduced coercive fields. Transport, magnetization, and x-ray diffractio…
The optical and vibrational properties of nanocrystalline thin films of MoS2, comprised of a mixture of edge terminated vertically aligned (ETVA) and (001)-oriented regions, on large insulating substrates are reported. From high resolution transmission electron microscopy (HRTEM), the average size of ETVA nanocrystals were ~5 nm and each nanocrystal consisted of only 3 to 5 monolayers of MoS2. The films were highly transparent (~80%) but the percent of transmittance decreased as the energy of the incident light approached to the band gap. Additionally, weak excitonic peaks were observed both i…
We compare STM investigations on two hexaboride compounds, SmB$_6$ and EuB$_6$, in an effort to provide a comprehensive picture of their surface structural properties. The latter is of particular importance for studying the nature of the surface states in SmB$_6$ by surface-sensitive tools. Beyond the often encountered atomically rough surface topographies of {\it in situ}, low-temperature cleaved samples, differently reconstructed as well as B-terminated and, more rarely, rare-earth terminated areas could be found. With all the different surface topographies observed on both hexaborides, a re…
Aurivillius ferroelectric $Bi_2WO_6$ (BWO) encompasses a broad range of functionalities, including robust fatigue-free ferroelectricity, high photocatalytic activity, and ionic conductivity. Despite these promising characteristics, an in-depth study on the growth of BWO thin films and ferroelectric characterization, especially at the atomic scale, is still lacking. Here, we report pulsed laser deposition (PLD) of BWO thin films on (001) $SrTiO_3$ substrates and characterization of ferroelectricity using the scanning transmission electron microscopy (STEM) and piezoresponse force microscopy (PF…
The magnetic anisotropy in MgO-capped MnPt films and its voltage control are studied using first-principles calculations. Sharp variation of the magnetic anisotropy with film thickness, especially in the Pt-terminated film, suggests that it may be widely tuned by adjusting the film thickness. In thick films the linear voltage control coefficient is as large as 1.5 and $-0.6$ pJ/Vm for Pt-terminated and Mn-terminated interfaces, respectively. The combination of a widely tunable magnetic anisotropy energy and a large voltage-control coefficient suggest that MgO-capped MnPt films can serve as a v…
Measurement of zeta potential of Ga and N-face gallium nitride has been carried out as function of pH. Both the faces show negative zeta potential in the pH range 5.5-9. The Ga face has an isoelectric point at pH 5.5. The N-face shows higher negative zeta potential due to larger concentration of adsorbed oxygen. Zeta potential data clearly showed that H-terminated diamond seed solution at pH 8 will be optimal for the self assembly of a monolayer of diamond nanoparticles on the GaN surface. Subsequent growth of thin diamond films on GaN seeded with H-terminated diamond seeds produced fully coal…
The van der Waals epitaxy of single crystalline Bi2Se3 film was achieved on hydrogen passivated Si(111) (H:Si) substrate by physical vapor deposition. Valence band structures of Bi2Se3/H:Si heterojunction were investigated by X-ray Photoemission Spectroscopy and Ultraviolet Photoemission Spectroscopy. The measured Schottky barrier height at the Bi2Se3-H:Si interface was 0.31 eV. The findings pave the way for economically preparing heterojunctions and multilayers of layered compound families of topological insulators.
We report on graphene-like exfoliation of the large-area crystalline films and ribbons of bismuth telluride with the thicknesses of a few atoms. It is demonstrated that bismuth telluride, the most important material for thermoelectric industry, can be mechanically separated into its building blocks -[Te-Bi-Te-Bi-Te]- atomic five-folds with the thickness of ~1 nm and even further - to subunits with smaller thicknesses. The atomically-thin crystals can be structured into suspended crystalline ribbons providing quantum confinement in two dimensions. The quasi two-dimensional (2-D) crystals of bis…
We have investigated electronic and magnetic properties of ultrathin SrRuO$_{3}$ (SRO) film grown on (111) SrTiO$_{3}$ substrate using the {\it ab initio} electronic structure calculations. Ru-terminated SRO (111) film suffers from strong surface atomic relaxations, while SrO$_{3}$-terminated one preserves the surface structure of ideal perovskites. Both Ru- and SrO$_{3}$-terminated SRO (111) film show unexpected interlayer antiferromagnetic (AFM) structure at the surface, but with different characters and mechanisms. The AFM structure for the former results from the large surface atomic relax…
We systematically measure the dielectric function of atomically thin MoS2 films with different layer numbers and demonstrate that excitonic effects play a dominant role in the dielectric function when the films are less than 5-7 layers thick. The dielectric function shows an anomalous dependence on the layer number. It decreases with the layer number increasing when the films are less than 5-7 layers thick but turns to increase with the layer number for thicker films. We show that this is because the excitonic effect is very strong in the thin MoS2 films and its contribution to the dielectric …
Since its fundamental inception from soap bubbles, Plateau law has sparked extensive research in equilibrated states. However, most studies primarily relied on liquids, foams or cellular structures, whereas its applicability has yet to be explored in nano-scale solid films. Here, we observed a variant Plateau law in networks of atomically thin domes made of solid two-dimensional (2D) transition metal dichalcogenides (TMDs). Discrete layer-dependent van der Waals (vdWs) interaction energies were experimentally and theoretically obtained for domes protruding in different TMD layers. Significant …
This paper reports the synthesis and detailed characterization of graphite thin films produced by thermal decomposition of the (0001) face of a 6H-SiC wafer, demonstrating the successful growth of single crystalline films down to approximately one graphene layer. The growth and characterization were carried out in ultrahigh vacuum (UHV) conditions. The growth process and sample quality were monitored by low-energy electron diffraction, and the thickness of the sample was determined by core level x-ray photoelectron spectroscopy. High-resolution angle-resolved photoemission spectroscopy shows c…
High-quality and impurity-free magnetite surfaces with (sqrt2xsqrt2)R45o reconstruction have been obtained for the Fe3O4(001) epitaxial films deposited on Fe(001). Based on atomically resolved STM images for both negative and positive sample polarity and Density Functional Theory calculations, a model of the magnetite (001) surface terminated with Fe ions forming dimers on the reconstructed (sqrt2xsqrt2)R45o octahedral iron layer is proposed.
CrSb is a layered antiferromagnet (AFM) with perpendicular magnetic anisotropy, a high Néel temperature, and large spin-orbit coupling (SOC), which makes it interesting for AFM spintronic applications. To elucidate the various mechanisms of Néel vector control, the effects of strain, band filling, and electric field on the magnetic anisotropy energy (MAE) of bulk and thin-film CrSb are determined and analysed using density functional theory. The MAE of the bulk crystal is large (1.2 meV per unit cell). Due to the significant ionic nature of the Cr-Sb bond, finite slabs are strongly affected by…
Atomically sharp oxide heterostructures often exhibit unusual physical properties that are absent in the constituent bulk materials. The interplay between electrostatic boundary conditions, strain and dimensionality in ultrathin epitaxial films can result in monolayer-scale transitions in electronic or magnetic properties. Here we report an atomically sharp antiferromagnetic-to-ferromagnetic phase transition when atomically growing polar antiferromagnetic LaMnO3 (001) films on SrTiO3 substrates. For a thickness of five unit cells or less, the films are antiferromagnetic, but for six unit cells…
Group-V elemental monolayers including phosphorene are emerging as promising 2D materials with semiconducting electronic properties. Here, we present the results of first principles calculations on stability, mechanical and electronic properties of 2D antimony (Sb), antimonene. Our calculations show that free-standing α and \b{eta} allotropes of antimonene are stable and semiconducting. The α-Sb has a puckered structure with two atomic sub-layers and \b{eta}-Sb has a buckled hexagonal lattice. The calculated Raman spectra and STM images have distinct features thus facilitating characterization…
Epitaxial growth of single crystalline noble metals on dielectric substrates has received tremendous attention recently due to their technological potentials as low loss plasmonic materials. Currently there are two different growth approaches, each with its strengths and weaknesses. One adopts a sophisticated molecular beam epitaxial procedure to grow atomically smooth epitaxial Ag films. However, the procedure is rather slow and becomes impractical to grow films with thickness > 50 nm. Another approach adopts a growth process using rapid e-beam deposition which is capable of growing single cr…
Atomically resolved intrinsic superconducting gap in (La,Pr)3Ni2O7 films
Southern University of Science and Technology（南方科技大学）；Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area（粤港澳大湾区量子科学中心）；Shanghai Jiao Tong University（上海交通大学）；Tsinghua University（清华大学）
The structure of thin terminated Bi(1 1 1) films of approximately 1 nm thickness is investigated from first principles. Our density functional theory calculations show that covalent bonds to the surface can change the orientation of the films completely. For thicker films, the effect is limited to the surface only. Based on these observations, we further present a simple model structure for the native oxide and chemically similar oxides, which form a protective capping layer, leaving the orientation of the films unchanged. The advantages of this energetically favorable layered termination are …
We study the ferroelectric stability and surface structural properties of an oxygen-terminated hexagonal YMnO$_3$ ultra-thin film using density functional theory. Under an open circuit boundary condition, the ferroelectric state with the spontaneous polarization normal to the (0001) surface, is found to be metastable in a single domain state despite the presence of a depolarizing field. We establish a connection between the result and the role of improper ferroelectric transition. Our results imply that improper ferroelectric ultrathin films can have rather unique properties that are distincti…
Large-area two-dimensional (2D) materials for technical applications can now be produced by chemical vapor deposition (CVD). Unfortunately, grain boundaries (GBs) are ubiquitously introduced as a result of the coalescence of grains with different crystallographic orientations. It is well known that the properties of materials largely depend on GB structures. Here, we carried out a systematic study on the GB structures in CVD-grown polycrystalline h-BN monolayer films by transmission electron microscope. Interestingly, most of these GBs are revealed to be formed via overlapping between neighbor…
A first-principles-based scheme is developed to simulate properties of (001) PbO-terminated Pb(Zr$_{1-x}$Ti$_{x}$)O$_3$ thin films that are under stress-free and open-circuit boundary conditions. Their low-temperature spontaneous polarization never vanishes down to the minimal thickness, and continuously rotates between the in-plane <010> and <110> directions when varying the Ti composition around x=0.50. Such rotation dramatically enhances piezoelectricity and dielectricity. Furthermore, the order of some phase transitions changes when going from bulk to thin films.
There is a great interest in the scientific community to perform calorimetry on samples having mass in the nanogram range. A detailed knowledge of the energy (heat) exchange in the fast growing family of micro- and nano-systems could provide valuable information about the chemistry and physics at the nano-scale. The possibility to have an atomically flat thermal probe represents an added value, because it provides the unique opportunity to perform Scanning Probe Microscopy (SPM) together with calorimetry. Here we report the fabrication, characterization, and calibration of atomically flat, sin…
