We study the ferroelectric stability and surface structural properties of an oxygen-terminated hexagonal YMnO$_3$ ultra-thin film using density functional theory. Under an open circuit boundary condition, the ferroelectric state with the spontaneous polarization normal to the (0001) surface, is found to be metastable in a single domain state despite the presence of a depolarizing field. We establish a connection between the result and the role of improper ferroelectric transition. Our results imply that improper ferroelectric ultrathin films can have rather unique properties that are distinctive from those of very thin films of ordinary ferroelectrics.
We performed first principles calculations for epitaxially strained orthorhombic CaTiO$_3$. The computational results reveal the existence of a metastable ferroelectric phase at compressive strain with unexpected in-plane polarization. Symmetry analysis indicates that two distortion modes at the X point combine to induce the polarization, leading to characterization as a hybrid improper ferroelectric. Our work demonstrates a mechanism for improper ferroelectricity in simple perovskites without the need for symmetry lowering by layering or cation ordering.
Integration of ferroelectric materials into novel technological applications requires low coercive field materials, and consequently, design strategies to reduce the ferroelectric switching barriers. In this first principles study, we show that biaxial strain, which has a strong effect on the ferroelectric ground states, can also be used to tune the switching barrier of hybrid improper ferroelectric Ruddlesden-Popper oxides. We identify the region of the strain -- tolerance factor phase diagram where this intrinsic barrier is suppressed, and show that it can be explained in relation to strain …
In this contribution to the special issue on magnetoelectrics and their applications, we focus on some single phase multiferroics theoretically predicted and/or experimentally discovered by the authors in recent years. In these materials, iron is the common core element. However, these materials are conceptually different from the mostly-studied BiFeO$_3$, since their ferroelectricity is improper. Our reviewed materials are not simply repeating one magnetoelectric mechanism, but cover multiple branches of improper ferroelectricity, including the magnetism-driven ferroelectrics, geometric ferro…
Improper ferroelectrics are described by two order parameters: a primary one, driving a transition to long-range distortive, magnetic or otherwise non-electric order, and the electric polarization, which is induced by the primary order parameter as a secondary, complementary effect. Using low-temperature scanning probe microscopy, we show that improper ferroelectric domains in YMnO$_3$ can be locally switched by electric field poling. However, subsequent temperature changes restore the as-grown domain structure as determined by the primary lattice distortion. The backswitching is explained by …
Cornell University（康奈尔大学）；University of Nebraska, Lincoln（内布拉斯加大学林肯分校）；Leibniz-Institut für Kristallzüchtung（莱布尼茨晶体生长研究所）；Pacific Northwest National Laboratory（太平洋西北国家实验室）；The Pennsylvania State University（宾夕法尼亚州立大学）；University of California, Berkeley（加州大学伯克利分校）；Rice University（莱斯大学）；Kavli Institute at Cornell for Nanoscale Science（康奈尔卡弗里纳米科学研究所）；Princeton University（普林斯顿大学）
Li et al. (Science Advances, 29 January, p. eabe3068) claim the discovery of two improper ferroelectrics, dabcoHClO4 and dabcoHBF4 (dabco = 1,4-diazabicyclo[2.2.2]octane), and that these materials exhibit superior pyroelectric figures of merit. This information is misleading due to the fundamental methodological errors and false conclusions, not to mention that these ferroelectrics were reported over 20 years ago. They are proper ferroelectrics, for which the spontaneous polarization is the macroscopic order parameter. We show that the useful pyroelectric coefficients of these materials are ab…
The successful theoretical prediction and experimental demonstration of hybrid improper ferroelectricity (HIF) provides a new pathway to couple octahedral rotations, ferroelectricity, and magnetism in complex materials. To enable technological applications, a HIF with a small coercive field is desirable. We successfully grow Sr3Sn2O7 single crystals, and discover that they exhibit the smallest electric coercive field at room temperature among all known HIFs. Furthermore, we demonstate that a small external stress can repeatedly erase and re-generate ferroelastic domains. In addition, using in-…
Time-dependent polarization relaxation behaviors induced by a depolarization field $E_{d}$ were investigated on high-quality ultrathin SrRuO$_{3}$/BaTiO$_{3}$/SrRuO$_{3}$ capacitors. The $E_d$ values were determined experimentally from an applied external field to stop the net polarization relaxation. These values agree with those from the electrostatic calculations, demonstrating that a large $E_{d}$ inside the ultrathin ferroelectric layer could cause severe polarization relaxation. For numerous ferroelectric devices of capacitor configuration, this effect will set a stricter size limit than…
Gadolinium molybdate is a classical example of an improper ferroelectric and ferroelastic material. It is established that the spontaneous polarization arises as a secondary effect, induced by a structural instability in the paraelectric phase, which leads to a unit cell doubling and the formation of a polar axis. However, previous X-ray diffraction studies on gadolinium molybdate have been restricted by the limited ability to include the entire 2θ range in the analysis, and thus, at atomic scale, much remains to be explored. By applying temperature dependent X-ray diffraction, we observe the …
Charged polar interfaces such as charged ferroelectric domain walls or heterostructured interfaces of ZnO/(Zn,Mg)O and LaAlO3/SrTiO3, across which the normal component of electric polarization changes suddenly, can host large two-dimensional conduction. Charged ferroelectric walls, which are energetically unfavorable in general, were found to be mysteriously abundant in hybrid improper ferroelectric (Ca,Sr)3Ti2O7 crystals. From the exploration of antiphase boundaries in bilayer-perovskites, we discover that each of four polarization-direction states is degenerated with two antiphase domains, a…
X-ray photoelectron diffraction is used to directly probe the intra-cell polar atomic distortion and tetragonality associated with ferroelectricity in ultrathin epitaxial PbTiO3 films. Our measurements, combined with ab-initio calculations, unambiguously demonstrate non-centro-symmetry in films a few unit cells thick, imply that films as thin as 3 unit cells still preserve a ferroelectric polar distortion, and also show that there is no thick paraelectric dead layer at the surface.
The ground-state polarization of PbTiO3 thin films is studied using a microscopic effective Hamiltonian with parameters obtained from first-principles calculations. Under short-circuit electrical boundary conditions, (001) films with thickness as low as three unit cells are found to have a perpendicularly polarized ferroelectric ground state with significant enhancement of the polarization at the surface.
We report on multiple fundamental qualitative improvements in the growth of improper ferroelectric hexagonal YMnO$_3$ (YMO) thin films and heterostructures by pulsed laser deposition (PLD). By a combination of pre-growth substrate annealing and low-energy-fluence PLD, we obtain a two-dimensional growth mode of the YMO films on yttria-stabilized zirconia (YSZ) with ultralow roughness and devoid of misoriented nanocrystalline inclusions. By inserting a sacrificial manganite layer capped with conducting indium-tin oxide between the substrate and the final film, the latter is grown in a fully latt…
Interface effects on the ferroelectric behavior of PbTiO$_3$ ultrathin films deposited on SrTiO$_3$ substrate are investigated using an interatomic potential approach with parameters fitted to first-principles calculations. We find that the correlation of atomic displacements across the film/substrate interface is crucial for the stabilization of the ferroelectric state in films a few unit-cells thick. We show that the minimum film thickness for the appearance of a spontaneous polarized domain state is not an intrinsic property of the ferroelectric film but depends on the polarizability of the…
Ferroelectric domain walls are attracting broad attention as atomic-scale switches, diodes and mobile wires for next-generation nanoelectronics. Charged domain walls in improper ferroelectrics are particularly interesting as they offer multifunctional properties and an inherent stability not found in proper ferroelectrics. Here we study the energetics and structure of charged walls in improper ferroelectric YMnO$_3$, InMnO$_3$ and YGaO$_3$ by first principles calculations and phenomenological modeling. Positively and negatively charged walls are asymmetric in terms of local structure and width…
Hybrid improper ferroelectrics (HIFs) have been intensely studied over the last few years to gain understanding of their temperature induced phase transitions and ferroelectric switching pathways. Here we report a switching from first- to second-order phase transition pathway for topical HIFs $Ca_{3-x}Sr_xTi_2O_7$, which is driven by the differing entropies of the phases that we identify as being associated with the dynamic motion of octahedral tilts and rotations. A greater understanding of the transition pathways in this class of layered perovskites, which host many physical properties that …
A first-principles-derived approach is developed to study the effects of uncompensated depolarizing electric fields on the properties of Pb(Zr,Ti)O$_3$ ultrathin films for different mechanical boundary conditions. A rich variety of ferroelectric phases and polarization patterns is found, depending on the interplay between strain and amount of screening of surface charges. Examples include triclinic phases, monoclinic states with in-plane and/or out-of-plane components of the polarization, homogeneous and inhomogeneous tetragonal states, as well as, peculiar laminar nanodomains.
The presence of a switchable spontaneous electric polarization makes ferroelectrics ideal candidates for the use in many applications such as memory and sensors devices. Since known ferroelectrics are rather limited, finding new ferroelectric (FE) materials has become a flourishing field. One promising route is to design the so-called hybrid improper ferroelectricity. However, the previous approach based on the Landau theory is not easily adopted to the systems that are unrelated to the Pbnm perovskite structure. To this end, we develop a general design rule that is applicable to any systems. …
The instability of ferroelectric ordering in ultra-thin films is one of the most important fundamental issues pertaining realization of a number of electronic devices with enhanced functionality, such as ferroelectric and multiferroic tunnel junctions or ferroelectric field effect transistors. In this paper, we investigate the polarization state of archetypal ultrathin (several nanometres) ferroelectric heterostructures: epitaxial single-crystalline BaTiO$_3$ films sandwiched between the most habitual perovskite electrodes, SrRuO$_3$, on top of the most used perovskite substrate, SrTiO$_3$. We…
Functional devices with ultrathin ferroelectric layers have been attracted as a promising candidate for next-generation memory and logic device applications. Using the ultrathin ferroelectric layers, particularly approaching the two-dimensional limit, however, it is still challenging to control ferroelectric switching and to observe ferroelectricity by spectroscopic tools. In particular, conventional methods such as electrical measurements and piezoelectric response force microscopy are very limited due to leakage currents and the smallness of the ferroelectric signals. Here, we show that the …
We study the interplay of structural and polar distortions in hexagonal YMnO3 and short-period PbTiO3/SrTiO3 superlattices by means of first-principles calculations at constrained electric displacement field D. We find that in YMnO3 the tilts of the oxygen polyhedra produce a robustly polar ground state, which persists at any choice of the electrical boundary conditions. Conversely, in PTO/STO the antiferrodistortive instabilities alone do not break inversion symmetry, and open-circuit bundary conditions restore a non-polar state. We suggest that this qualitative difference naturally provides …
The improper ferroelectricity in YMnO$_3$ and other related multiferroic hexagonal manganites are known to cause topologically protected ferroelectric domains that give rise to rich and diverse physical phenomena. The local structure and structural coherence across the ferroelectric transition, however, were previously not well understood. Here we reveal the evolution of the local structure with temperature in YMnO$_3$ using neutron total scattering techniques, and interpret them with the help of first-principles calculations. The results show that, at room temperature, the local and average s…
Switching kinetics in ultrathin epitaxial BaTiO3 films confirms the existence of the homogeneous switching (without domains) in ultrathin ferroelectric films. We suppose that the homogeneous switching in ultrathin films is a common phenomenon for all ferroelectric materials.
Structural studies on ultrathin SrRuO3/BaTiO3/SrRuO3 capacitors, with BaTiO3 thicknesses of between 5 nm and 30 nm, show well-defined interfaces between ferroelectric BaTiO3 and electrode SrRuO3 layers. In these capacitors, we cannot observe any extrinsic electrical effects due to either the formation of an insulating interfacial passive layer or passive-layer-induced charge injection. Such high quality interfaces result in very good fatigue endurance, even for the 5 nm thick BaTiO3 capacitor.
Recent experiments on layered α-In2Se3 have confirmed its room-temperature ferroelectricity under ambient condition. This observation renders α-In2Se3 an excellent platform for developing two-dimensional (2D) layered-material based electronics with nonvolatile functionality. In this letter, we demonstrate non-volatile memory effect in a hybrid 2D ferroelectric field effect transistor (FeFET) made of ultrathin α-In2Se3 and graphene. The resistance of graphene channel in the FeFET is tunable and retentive due to the electrostatic doping, which stems from the electric polarization of the ferroele…
We report the dielectric properties of improper ferroelectric h-ErMnO$_3$. From the bulk characterisation we observe a temperature and frequency range with two distinct relaxation-like features, leading to high and even 'colossal' values for the dielectric permittivity. One feature trivially originates from the formation of a Schottky barrier at the electrode-sample interface, whereas the second one relates to an internal barrier layer capacitance (BLC). The calculated volume fraction of the internal BLC (of 8 %) is in good agreement with the observed volume fraction of insulating domain walls…
Charged domain walls and boundaries in ferroelectric materials display distinct phenomena, such as an increased conductivity due to the accumulation of bound charges. Here, we report the electron microscopy observations of atomic-scale arrangements at charged domain boundaries in the hybrid improper ferroelectric Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$. Like in the prototype improper ferroelectric YMnO$_3$, we find that charged domain boundaries in Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$ correspond to out-of-phase boundaries, which separate adjacent domains with a fractional translational shift of the uni…
In hybrid improper ferroelectric systems, polarization arises from the onset of successive nonpolar lattice modes. In this work, measurements and modeling were performed to determine the spatial symmetries of the phases involved in the transitions to these modes. Structural and optical measurements reveal that the tilt and rotation distortions of the MnO6 or TiO6 polyhedra relative to the high symmetry phases driving ferroelectricity in the hybrid improper Ca3X2O7 system (X=Mn and Ti) condense at different temperatures. The tilt angle vanishes abruptly at T$_T$ ~ 400 K for Ca3Mn2O7 (and contin…
Standing on successful first principles predictions for new functional ferroelectric materials, a number of new ferroelectrics have been experimentally discovered. Utilizing trilinear coupling of two types of octahedron rotations, hybrid improper ferroelectricity has been theoretically predicted in ordered perovskites and the Ruddlesden-Popper compounds (Ca$_{3}$Ti$_{2}$O$_{7}$, Ca$_{3}$Mn$_{2}$O$_{7}$, and (Ca/Sr/Ba)$_{3}$(Sn/Zr/Ge)$_{2}$O$_{7}$). However, the ferroelectricity of these compounds has never been experimentally confirmed and even their polar nature has been under debate. Here we…
Going down to the limit of ultrathin films holds promise for a new generation of devices such as ferroelectric tunnel junctions or resistive memories. However, these length scales also make the devices sensitive to parasitic effects related to miniaturization, and a better understanding of what happens as size is reduced is of practical importance for the future development of these devices. As the experimental advances in materials preparation and characterization have come together with great progress in theoretical modeling of ferroelectrics, both theorists and experimentalists can finally …
Ca$_3$Ti$_2$O$_7$ is an experimentally confirmed hybrid improper ferroelectric material, in which the electric polarization is induced by a combination of the coherent TiO$_6$ octahedral rotation and tilting. In this work, we investigate the tuning of ferroelectricity of Ca$_3$Ti$_2$O$_7$ using iso-valent substitutions on Ca-sites. Due to the size mismatch, larger/smaller alkaline earths prefer $A$'/$A$ sites respectively, allowing the possibility for site-selective substitutions. Without extra carriers, such site-selected iso-valent substitutions can significantly tune the TiO$_6$ octahedral …
We simulate from first-principles the energetic, structural, and electronic properties of ferroelectric domains in ultrathin capacitors made of a few unit cells of BaTiO$_3$ between two metallic SrRuO$_3$ electrodes in short circuit. The domains are stabilized down to two unit cells, adopting the form of a domain of closure, common in ferromagnets but only recently detected experimentally in ferroelectric thin films. The domains are closed by the in-plane relaxation of the atoms in the first SrO layer of the electrode, that behaves more like SrO in highly polarizable SrTiO$_3$ than in metallic…
Ferroic materials are well known to exhibit heterogeneity in the form of domain walls. Understanding the properties of these boundaries is crucial for controlling functionality with external stimuli and for realizing their potential for ultra-low power memory and logic devices as well as novel computing architectures. In this work, we employ synchrotron-based near-field infrared nano-spectroscopy to reveal the vibrational properties of ferroelastic (90$^\circ$ ferroelectric) domain walls in the hybrid improper ferroelectric Ca$_3$Ti$_2$O$_7$. By locally mapping the Ti-O stretching and Ti-O-Ti …
Previous studies showed that, as ferroelectric films become thinner, their Curie temperature (Tc) and polarization below Tc both typically decrease. In contrast, a recent experiment [Chang et al., Science 353, 274 (2016)] observed that atomic-thick SnTe films have a higher Tc than their bulk counterpart, which was attributed to extrinsic effects. Here, we find, using first-principles calculations, that the 0K energy barrier for the polarization switching (which is a quantity directly related to Tc) is higher in most investigated defect-free SnTe ultrathin films than that in bulk SnTe, and that…
The temperature-dependent phase transitions in Ruddlesden-Popper oxides with perovskite bilayers have been under increased scrutiny in recent years due to the so-called hybrid improper ferroelectricity that some chemical compositions exhibit. However, little is currently understood about the hydrostatic pressure dependence of these phase transitions. Herein we present the results of a high-pressure powder synchrotron X-ray diffraction experiment and $ab~initio$ calculations on the bilayered Ruddlesden-Popper phases Ca$_{3}$Mn$_{2}$O$_{7}$ and Ca$_{3}$Ti$_{2}$O$_{7}$. In both compounds we obser…
The evolution of tetragonality with thickness has been probed in epitaxial c-axis oriented PbTiO3 films with thicknesses ranging from 500 down to 24 Angstroms. High resolution x-ray pointed out a systematic decrease of the c-axis lattice parameter with decreasing film thickness below 200 Angstroms. Using a first-principles model Hamiltonian approach, the decrease in tetragonality is related to a reduction of the polarization attributed to the presence of a residual unscreened depolarizing field. It is shown that films below 50 Angstroms display a significantly reduced polarization but still re…
The epitaxial growth of multifunctional oxides on semiconductors has opened a pathway to introduce new functionalities to semiconductor device technologies. In particular, ferroelectric materials integrated on semiconductors could lead to low-power field-effect devices that can be used for logic and memory. Essential to realizing such field-effect devices is the development of ferroelectric metal-oxide-semiconductor (MOS) capacitors, in which the polarization of a ferroelectric gate is coupled to the surface potential of a semiconducting channel. Here we demonstrate that ferroelectric MOS capa…
We fabricated ultrathin ferroelectric/correlated electron oxide heterostructures composed of the ferroelectric Pb(Zr0.2Ti0.8)O3 and the correlated electron oxide (CEO) La0.8Sr0.2MnO3 on SrTiO3 substrates by pulsed laser epitaxy. The hole accumulation in the ultrathin CEO layer was substantially modified by heterostructuring with the ferroelectric layer, resulting in an insulator-metal transition. In particular, our thickness dependent study showed that drastic changes in transport and magnetic properties were strongly coupled to the modulation of charge carriers by ferroelectric field effect, …
Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are introducing new directions in the 2D materials landscape. The coexistence of ferroelectricity and spin-orbit interactions play a key role in their optoelectronic properties. We perform a detailed study on a recently synthesized ferroelectric 2D-HOIP, (AMP)PbI$_4$ (AMP = 4-aminomethyl-piperidinium). The calculated polarization and Rashba parameter are in excellent agreement with experimental values. We report a striking new effect, i.e., an extraordinarily large Rashba anisotropy that is tunable by ferroelectric polarization:…
Using first principles calculations, we study the microscopic origin of ferroelectricity (FE) induced by magnetic order in the orthorhombic HoMnO3. We obtain the largest ferroelectric polarization observed in the whole class of improper magnetic ferroelectrics to date. We find that the two proposed mechanisms for FE in multiferroics, lattice- and electronic-based, are simultaneously active in this compound: a large portion of the ferroelectric polarization arises due to quantum-mechanical effects of electron orbital polarization, in addition to the conventional polar atomic displacements. An i…
We have used a first-principles-based scheme to compute the temperature-versus-misfit strain ``Pertsev'' phase diagram of ultrathin films of {\sl incipient} ferroelectric KTaO$_3$. Our results suggest that, at variance with the bulk material, KTaO$_3$ ultrathin films cannot be described as quantum paraelectrics. Rather, the behavior of the films is largely determined by surface/interface effects that favor ferroelectricity and the imperfect screening of the depolarizing fields. This leads to Pertsev phase diagrams that are qualitatively similar to those of {\sl normal} ferroelectrics such as B…
Perovskite ferroelectric oxides are usually considered to be brittle materials, however, recent work [Dong et al., Science 366, 475 (2019)] demonstrated the super-elasticity in the freestanding BaTiO3 thin films. This property may originate from the ferroelectric domain evolution during the bending, which is difficult to observe in experiments. Therefore, understanding the relation among the bending deformation, thickness of the films, and the domain dynamics is critical for their potential applications in flexible ferroelectric devices. Here, we reported the dynamics of ferroelectric polariza…
Decoupling effects of the resistive-switching behavior on the polarization reversal in ultrathin ferroelectric Hf0.5Zr0.5O2 films
Harbin Institute of Technology, Shenzhen（哈尔滨工业大学（深圳））；Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area（粤港澳大湾区量子科学中心）；Westlake University（西湖大学）；Indian Institute of Science（印度科学学院）；University of Science and Technology Beijing（北京科技大学）
A long standing problem of domain switching process - how domains nucleate - is examined in ultrathin ferroelectric films. We demonstrate that the large depolarization fields in ultrathin films could significantly lower the nucleation energy barrier (U*) to a level comparable to thermal energy (kBT), resulting in power-law like polarization decay behaviors. The "Landauer's paradox": U* is thermally insurmountable is not a critical issue in the polarization switching of ultrathin ferroelectric films. We empirically find a universal relation between the polarization decay behavior and U*/kBT.
We demonstrate that electromagnons can be used to directly probe the nature of a phase transition between magnetically ordered phases in an improper ferroelectric. The antiferromagnetic/paraelectric to antiferromagnetic/ferroelectric phase transition in Cu$_{1-x}$Zn$_{x}$O ($x=0, 0.05$) alloys was tracked via the electromagnon response using terahertz time-domain spectroscopy, on heating and cooling through the phase transition. The transition was found to exhibit thermal hysteresis, confirming its first-order nature, and to broaden under the influence of spin-disorder upon Zn substitution. Th…
Using density functional theory calculations, ultrathin films of SrVO3(d1) and SrCrO3(d2) on SrTiO3 substrates have been studied as possible multiferroics. Although both are metallic in the bulk limit, they are found to be insulating as a result of orbital ordering driven by lattice distortions at the ultrathin limit. While the distortions in SrVO3 have a first-order Jahn-Teller origin, those in SrCrO3 are ferroelectric in nature. This route to ferroelectricity (FE) results in polarizations comparable with conventional ferroelectrics.
Electronic and structural phenomena at the twin domain wall-surface junctions in the ferroelastic materials are analyzed. Carriers accumulation caused by the strain-induced band structure changes originated via the deformation potential mechanism, structural order parameter gradient, rotostriction and flexoelectric coupling is explored. Approximate analytical results show that inhomogeneous elastic strains, which exist in the vicinity of the twin walls - surface junctions due to the rotostriction coupling, decrease the local band gap via the deformation potential and flexoelectric coupling mec…
