Chau Yuen, Sumei Sun, Mel Meau Shin Ho
We propose an improved beamforming matrix compression by Givens Rotation with the use of variable feedback rate. The variable feedback rate means that the number of bits used to represent the quantized beamforming matrix is based on the value of the matrix. Compared with the fixed feedback rate scheme, the proposed method has better performance without additional feedback bandwidth.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
Millimeter wave (mmWave) spectrum has drawn attention due to its tremendous available bandwidth. The high propagation losses in the mmWave bands necessitate beamforming with a large number of antennas. Traditionally each antenna is paired with a high-speed analog-to-digital converter (ADC), which results in high power consumption. A hybrid beamforming architecture and one-bit resolution ADCs have been proposed to reduce power consumption. However, analog beamforming and one-bit quantization make channel estimation more challenging. In this paper, we propose a narrowband channel estimation algo…
Feedback of quantized channel state information (CSI), called limited feedback, enables transmit beamforming in multiple-input-multiple-output (MIMO) wireless systems with a small amount of overhead. Due to its efficiency, beamforming with limited feedback has been adopted in several wireless communication standards. Prior work on limited feedback commonly adopts the block fading channel model where temporal correlation in wireless channels is neglected. This paper considers temporally-correlated channels and designs single-user transmit beamforming with limited feedback. Analytical results co…
Opportunistic scheduling and beamforming schemes with reduced feedback are proposed for MIMO-OFDMA downlink systems. Unlike the conventional beamforming schemes in which beamforming is implemented solely by the base station (BS) in a per-subcarrier fashion, the proposed schemes take advantages of a novel channel decomposition technique to perform beamforming jointly by the BS and the mobile terminal (MT). The resulting beamforming schemes allow the BS to employ only {\em one} beamforming matrix (BFM) to form beams for {\em all} subcarriers while each MT completes the beamforming task for each …
A receiver with perfect channel state information (CSI) in a point-to-point multiple-input multiple-output (MIMO) channel can compute the transmit beamforming vector that maximizes the transmission rate. For frequency-division duplex, a transmitter is not able to estimate CSI directly and has to obtain a quantized transmit beamforming vector from the receiver via a rate-limited feedback channel. We assume that time evolution of MIMO channels is modeled as a Gauss-Markov process parameterized by a temporal-correlation coefficient. Since feedback rate is usually low, we assume rank-one transmit …
Full-Duplex Multiuser MISO Under Coarse Quantization: Per-Antenna SQNR Analysis and Beamforming Design
本文提出了一种考虑自干扰和量化的波束成形方法，以提高全双工多用户MISO系统在粗量化下的频谱效率。
A simple feedback control algorithm is presented for distributed beamforming in a wireless network. A network of wireless sensors that seek to cooperatively transmit a common message signal to a Base Station (BS) is considered. In this case, it is well-known that substantial energy efficiencies are possible by using distributed beamforming. The feedback algorithm is shown to achieve the carrier phase coherence required for beamforming in a scalable and distributed manner. In the proposed algorithm, each sensor independently makes a random adjustment to its carrier phase. Assuming that the BS i…
Opportunistic scheduling and beamforming schemes have been proposed previously by the authors for reduced-feedback MIMO-OFDMA downlink systems where the MIMO channel of each subcarrier is decomposed into layered spatial subchannels. It has been demonstrated that significant feedback reduction can be achieved by returning information about only one beamforming matrix (BFM) for all subcarriers from each MT, compared to one BFM for each subcarrier in the conventional schemes. However, since the previously proposed channel decomposition was derived based on singular value decomposition, the result…
In this paper, the required amount of feedback overhead for multiple-input multiple-output (MIMO) beamforming over time-varying channels is presented in terms of the entropy of the feedback messages. In the case that each transmit antenna has its own power amplifier which has individual power limit, it has been known that only phase steering information is necessary to form the optimal transmit beamforming vector. Since temporal correlation exists for wireless fading channels, one can utilize the previous reported feedback messages as prior information to efficiently encode the current feedbac…
We analyze the effect of finite rate feedback on CDMA (code-division multiple access) signature optimization and MIMO (multi-input-multi-output) beamforming vector selection. In CDMA signature optimization, for a particular user, the receiver selects a signature vector from a codebook to best avoid interference from other users, and then feeds the corresponding index back to the specified user. For MIMO beamforming vector selection, the receiver chooses a beamforming vector from a given codebook to maximize throughput, and feeds back the corresponding index to the transmitter. These two proble…
Cooperative beamforming across access points (APs) and fronthaul quantization strategies are essential for cloud radio access network (C-RAN) systems. The nonconvexity of the C-RAN optimization problems, which is stemmed from per-AP power and fronthaul capacity constraints, requires high computational complexity for executing iterative algorithms. To resolve this issue, we investigate a deep learning approach where the optimization module is replaced with a well-trained deep neural network (DNN). An efficient learning solution is proposed which constructs a DNN to produce a low-dimensional rep…
An energy-efficient opportunistic collaborative beamformer with one-bit feedback is proposed for ad hoc sensor networks over Rayleigh fading channels. In contrast to conventional collaborative beamforming schemes in which each source node uses channel state information to correct its local carrier offset and channel phase, the proposed beamforming scheme opportunistically selects a subset of source nodes whose received signals combine in a quasi-coherent manner at the intended receiver. No local phase-precompensation is performed by the nodes in the opportunistic collaborative beamformer. As a…
We examine the capacity of beamforming over a single-user, multi-antenna link taking into account the overhead due to channel estimation and limited feedback of channel state information. Multi-input single-output (MISO) and multi-input multi-output (MIMO) channels are considered subject to block Rayleigh fading. Each coherence block contains $L$ symbols, and is spanned by $T$ training symbols, $B$ feedback bits, and the data symbols. The training symbols are used to obtain a Minimum Mean Squared Error estimate of the channel matrix. Given this estimate, the receiver selects a transmit beamfor…
Transmit beamforming is a simple multi-antenna technique for increasing throughput and the transmission range of a wireless communication system. The required feedback of channel state information (CSI) can potentially result in excessive overhead especially for high mobility or many antennas. This work concerns efficient feedback for transmit beamforming and establishes a new approach of controlling feedback for maximizing net throughput, defined as throughput minus average feedback cost. The feedback controller using a stationary policy turns CSI feedback on/off according to the system state…
This paper considers multiaccess multiple-input multiple-output (MIMO) systems with finite rate feedback. The goal is to understand how to efficiently employ the given finite feedback resource to maximize the sum rate by characterizing the performance analytically. Towards this, we propose a joint quantization and feedback strategy: the base station selects the strongest users, jointly quantizes their strongest eigen-channel vectors and broadcasts a common feedback to all the users. This joint strategy is different from an individual strategy, in which quantization and feedback are performed a…
With finite-rate feedback, we propose two feedback methods for transmit beamforming in a point-to-point MISO-OFDM channel. For the first method, a receiver with perfect channel information, quantizes and feeds back the optimal transmit beamforming vectors of a few selected subcarriers, which are equally spaced. Based on those quantized vectors, the transmitter applies either constant, linear, or higher-order interpolation with the remaining beamforming vectors. With constant interpolation, we derive the approximate sum achievable rate and the optimal cluster size that maximizes the approximate…
The goal of combining beamforming and space-time coding in this work is to obtain full-diversity order and to provide additional received power (array gain) compared to conventional space-time codes. In our system, we consider a quasi-static fading environment and we incorporate both high-rate and low-rate feedback channels with possible feedback errors. To utilize feedback information, a class of code constellations is proposed, inspired from orthogonal designs and precoded space-time block codes, which is called generalized partly orthogonal designs or generalized PODs. Furthermore, to model…
To alleviate the high cost of hardware in mmWave systems, hybrid analog/digital precoding is typically employed. In the conventional two-stage feedback scheme, the analog beamformer is determined by beam search and feedback to maximize the desired signal power of each user. The digital precoder is designed based on quantization and feedback of effective channel to mitigate multiuser interference. Alternatively, we propose a one-stage feedback scheme which effectively reduces the complexity of the signalling and feedback procedure. Specifically, the second-order channel statistics are leveraged…
Multiple antenna techniques that allow energy beamforming have been looked upon as a possible candidate for increasing the transfer efficiency between the energy transmitter (ET) and the energy receiver (ER) in wireless power transfer. This paper introduces a novel scheme that facilitates energy beamforming by utilizing Received Signal Strength Indicator (RSSI) values to estimate the channel. Firstly, in the training stage, the ET will transmit using each beamforming vector in a codebook, which is pre-defined using a Cramer-Rao lower bound analysis. RSSI value corresponding to each beamforming…
It is well known that Multiple-Input Multiple-Output (MIMO) systems have high spectral efficiency, especially when channel state information at the transmitter (CSIT) is available. When CSIT is obtained by feedback, it is practical to assume that the channel state feedback rate is finite and the CSIT is not perfect. For such a system, we consider beamforming and power on/off strategy for its simplicity and near optimality, where power on/off means that a beamforming vector (beam) is either turned on with a constant power or turned off. The main contribution of this paper is to accurately evalu…
This paper focuses on the design of beamforming codebooks that maximize the average normalized beamforming gain for any underlying channel distribution. While the existing techniques use statistical channel models, we utilize a model-free data-driven approach with foundations in machine learning to generate beamforming codebooks that adapt to the surrounding propagation conditions. The key technical contribution lies in reducing the codebook design problem to an unsupervised clustering problem on a Grassmann manifold where the cluster centroids form the finite-sized beamforming codebook for th…
In this paper, we consider a multi-antenna system where the receiver should harvest energy from the transmitter by wireless energy transfer to support its wireless information transmission. In order to maximize the harvesting energy, we propose to perform adaptive energy beamforming according to the instantaneous channel state information (CSI). To help the transmitter to obtain the CSI for energy beamforming, we further propose a win-win CSI quantization feedback strategy, so as to improve the efficiencies of both power and information transmission. The focus of this paper is on the tradeoff …
This paper studies the structure of downlink sum-rate maximizing selective decentralized feedback policies for opportunistic beamforming under finite feedback constraints on the average number of mobile users feeding back. Firstly, it is shown that any sum-rate maximizing selective decentralized feedback policy must be a threshold feedback policy. This result holds for all fading channel models with continuous distribution functions. Secondly, the resulting optimum threshold selection problem is analyzed in detail. This is a non-convex optimization problem over finite dimensional Euclidean spa…
This paper investigates three open problems in random beamforming based communication systems: the scheduling policy with heterogeneous users, the closed form sum rate, and the randomness of multiuser diversity with selective feedback. By employing the cumulative distribution function based scheduling policy, we guarantee fairness among users as well as obtain multiuser diversity gain in the heterogeneous scenario. Under this scheduling framework, the individual sum rate, namely the average rate for a given user multiplied by the number of users, is of interest and analyzed under different fee…
This letter deals with the opportunistic beamforming (OBF) scheme for multi-antenna downlink with spatial randomness. In contrast to conventional OBF, the terminals return only 1-bit feedback, which is powered by wireless power transfer through a rectenna array. We study two fundamental topologies for the combination of the rectenna elements; the direct-current combiner and the radio-frequency combiner. The beam outage probability is derived in closed form for both combination schemes, by using high order statistics and stochastic geometry.
Due to the heavy reliance of millimeter-wave (mmWave) wireless systems on directional links, beamforming (BF) with high-dimensional arrays is essential for cellular systems in these frequencies. How to perform the array processing in a power efficient manner is a fundamental challenge. Analog and hybrid BF require fewer analog-to-digital and digital-to-analog converters (ADCs and DACs), but can only communicate in a small number of directions at a time, limiting directional search, spatial multiplexing and control signaling. Digital BF enables flexible spatial processing, but must be operated …
Base station cooperation improves the sum-rates that can be achieved in cellular systems. Conventional cooperation techniques require sharing large amounts of information over finite-capacity backhaul links and assume that base stations have full channel state information (CSI) of all the active users in the system. In this paper, a new limited feedback strategy is proposed for multicell beamforming where cooperation is restricted to sharing only the CSI of active users among base stations. The system setup considered is a linear array of cells based on the Wyner model. Each cell contains sing…
Wireless energy transfer (WET) has attracted significant attention recently for providing energy supplies wirelessly to electrical devices without the need of wires or cables. Among different types of WET techniques, the radio frequency (RF) signal enabled far-field WET is most practically appealing to power energy constrained wireless networks in a broadcast manner. To overcome the significant path loss over wireless channels, multi-antenna or multiple-input multiple-output (MIMO) techniques have been proposed to enhance the transmission efficiency and distance for RF-based WET. However, in o…
The focus of this work is on the analysis of transmit beamforming schemes with a low-rate feedback link in wireless sensor/relay networks, where nodes in the network need to implement beamforming in a distributed manner. Specifically, the problem of distributed phase alignment is considered, where neither the transmitters nor the receiver has perfect channel state information, but there is a low-rate feedback link from the receiver to the transmitters. In this setting, a framework is proposed for systematically analyzing the performance of distributed beamforming schemes. To illustrate the adv…
In this paper, a new user-scheduling-and-beamforming method is proposed for multi-user massive multiple-input multiple-output (massive MIMO) broadcast channels in the context of two-stage beamforming. The key ideas of the proposed scheduling method are 1) to use a set of orthogonal reference beams and construct a double cone around each reference beam to select `nearly-optimal' semi-orthogonal users based only on channel quality indicator (CQI) feedback and 2) to apply post-user-selection beam refinement with zero-forcing beamforming (ZFBF) based on channel state information (CSI) feedback onl…
Unsourced random access (URA) has emerged as a candidate paradigm for massive machine-type communication (MTC) in next-generation wireless networks. While many excellent uplink schemes have been developed for URA, these schemes do not specify a mechanism for providing feedback regarding whether a user's message was successfully decoded. While this may be acceptable in some MTC scenarios, the lack of feedback is inadequate for applications that demand a high level of reliability. However, the problem of providing feedback to active users is complicated by the fact that the base station does not…
The radio frequency (RF) phase shifter with finite quantization bits in analog beamforming (AB) structure forms quantization error (QE) and causes a performance loss of received signal to interference plus noise ratio (SINR) at the receiver (called Bob). By using the law of large numbers in probability theory, the closed-form expression of SINR performance loss is derived to be inversely proportional to the square of sinc (or sin(x)/x) function. Here, a phase alignment method is applied in directional modulation transmitter with AB structure. Also, the secrecy rate (SR) expression is derived w…
In limited feedback multi-user multiple-input multiple-output (MU-MIMO) cellular networks, users send quantized information about the channel conditions to the associated base station (BS) for downlink beamforming. However, channel quantization and beamforming have been treated as two separate tasks conventionally, which makes it difficult to achieve global system optimality. In this paper, we propose an augmented deep unfolding (ADU) approach that jointly optimizes the beamforming scheme at the BSs and the channel quantization scheme at the users. In particular, the classic WMMSE beamformer i…
Multiple input multiple output (MIMO) precoding is an efficient scheme that may significantly enhance the communication link. However, this enhancement comes with a cost. Many precoding schemes require channel knowledge at the transmitter that is obtained through feedback from the receiver. Focusing on the natural common fusion of orthogonal frequency division multiplexing (OFDM) and MIMO, we exploit the channel correlation in the frequency and spatial domain to reduce the required feedback rate in a frequency division duplex (FDD) system. The proposed feedback method is based on Huffman codin…
Energy beamforming (EB) is a key technique for achieving efficient radio-frequency (RF) transmission enabled wireless energy transfer (WET). By optimally designing the waveforms from multiple energy transmitters (ETs) over the wireless channels, they are constructively combined at the energy receiver (ER) to achieve an EB gain that scales with the number of ETs. However, the optimal design of transmit waveforms requires accurate channel state information (CSI) at the ETs, which is challenging to obtain in practical WET systems. In this paper, we propose a new channel training scheme to achieve…
In this paper, we propose and evaluate a novel beamforming strategy for directional frame timing synchronization in wideband millimeter-wave (mmWave) systems operating with low-resolution analog-to-digital converters (ADCs). In the employed system model, we assume multiple radio frequency chains equipped at the base station to simultaneously form multiple synchronization beams in the analog domain. We formulate the corresponding directional frame timing synchronization problem as a max-min multicast beamforming problem under low-resolution quantization. We first show that the formulated proble…
This paper proposes a novel channel estimation method, and a cluster-based opportunistic scheduling policy, that enhances the efficiency of wireless energy transfer in a system consisting of multiple energy receivers (ERs). Firstly, in the training stage, the energy transmitter (ET) obtains a set of RSSI feedback values from all ERs, and these values are used to estimate the channels between the ET and all ERs. Next, based on the channel estimates, the ERs are grouped into clusters, and the cluster that has its members closest to its centroid in phase is picked. This cluster will be given prio…
This paper characterizes the effect of finite rate channel state feedback on the sum rate of a multi-access multiple-input multiple-output (MIMO) system. We propose to control the users jointly, specifically, we first choose the users jointly and then select the corresponding beamforming vectors jointly. To quantify the sum rate, this paper introduces the composite Grassmann manifold and the composite Grassmann matrix. By characterizing the distortion rate function on the composite Grassmann manifold and calculating the logdet function of a random composite Grassmann matrix, a good sum rate ap…
On the multi-antenna broadcast channel, the spatial degrees of freedom support simultaneous transmission to multiple users. The optimal multiuser transmission, known as dirty paper coding, is not directly realizable. Moreover, close-to-optimal solutions such as Tomlinson-Harashima precoding are sensitive to CSI inaccuracy. This paper considers a more practical design called per user unitary and rate control (PU2RC), which has been proposed for emerging cellular standards. PU2RC supports multiuser simultaneous transmission, enables limited feedback, and is capable of exploiting multiuser divers…
Beamforming is a widely used method of provisioning high quality wireless channels that leads to high data rates and simple decoding structures. It requires feedback of Channel State Information (CSI) from receiver to transmitter, and the accuracy of this information is limited by rate constraints on the feedback channel and by delay. It is important to understand how the performance gains associated with beamforming depend on the accuracy or currency of the Channel State Information. This paper quantifies performance degradation caused by aging of CSI. It uses outage probability to measure th…
In this paper, we have studied the bit partitioning schemes for the multicell multiple-input and single-output (MISO) infrastructure. Zero forcing beamforming is used to null out the interference signals and the random vector quantization, quantizes the channel vectors. For minimal feedback period (MFP), the upper bound of rate loss is calculated and optimal bit partitioning among the channels is shown. For adaptive feedback period scheme (AFP), joint optimization schemes of feedback period and bit partitioning are proposed. Finally, we compare the sum rate efficiency of each scheme and conclu…
Deep Learning-Based CSI Feedback for Beamforming in Single- and Multi-cell Massive MIMO Systems
针对现有深度学习CSI反馈方法仅关注精度、忽略波束成形性能的问题，提出以最大化波束成形增益为目标的CsiFBnet框架，适配单/多小区场景，采用无监督训练，实现性能提升与复杂度降低。
We study quantized beamforming in wireless amplify-and-forward relay-interference networks with any number of transmitters, relays, and receivers. We design the quantizer of the channel state information to minimize the probability that at least one receiver incorrectly decodes its desired symbol(s). Correspondingly, we introduce a generalized diversity measure that encapsulates the conventional one as the first-order diversity. Additionally, it incorporates the second-order diversity, which is concerned with the transmitter power dependent logarithmic terms that appear in the error rate expre…
Deep Learning for Joint Design of Pilot, Channel Feedback, and Hybrid Beamforming in FDD Massive MIMO-OFDM Systems
针对FDD大规模MIMO-OFDM系统，提出端到端深度学习框架，联合设计导频、信道反馈与混合波束成形，并利用图神经网络建模波束成形器交互。
Hybrid beamforming is widely recognized as an important technique for millimeter wave (mmWave) multiple input multiple output (MIMO) systems. Generalized spatial modulation (GSM) is further introduced to improve the spectrum efficiency. However, most of the existing works on beamforming assume the perfect channel state information (CSI), which is unrealistic in practical systems. In this paper, joint optimization of downlink pilot training, channel estimation, CSI feedback, and hybrid beamforming is considered in GSM aided frequency division duplexing (FDD) mmWave MIMO systems. With the help o…
The use of large-scale antenna systems in future commercial wireless communications is an emerging technology that uses an excess of transmit antennas to realize high spectral efficiency. Achieving potential gains with large-scale antenna arrays in practice hinges on sufficient channel estimation accuracy. Much prior work focuses on TDD based networks, relying on reciprocity between the uplink and downlink channels. However, most currently deployed commercial wireless systems are FDD based, making it difficult to exploit channel reciprocity. In massive MIMO FDD systems, the problem of channel …
To determine the transmission strategy for joint wireless information and energy transfer (JWIET) in the MIMO interference channel (IFC), the information access point (IAP) and energy access point (EAP) require the channel state information (CSI) of their associated links to both the information-decoding (ID) mobile stations (MSs) and energy-harvesting (EH) MSs (so-called local CSI). In this paper, to reduce th e feedback overhead of MSs for the JWIET in two-user MIMO IFC, we propose a Geodesic energy beamforming scheme that requires partial CSI at the EAP. Furthermore, in the two-user MIMO IF…
Multiple antenna techniques, that allow energy beamforming, have been looked upon as a possible candidate for increasing the efficiency of the transfer process between the energy transmitter (ET) and the energy receiver (ER) in wireless energy transfer. This paper introduces a novel scheme that facilitates energy beamforming by utilizing Received Signal Strength Indicator (RSSI) values to estimate the channel. Firstly, in the training stage, the ET will transmit sequentially using each beamforming vector in a codebook, which is pre-defined using a Cramer-Rao lower bound analysis. The RSSI valu…
This paper considers the joint fronthaul compression and transmit beamforming design for the uplink cloud radio access network (C-RAN), in which multi-antenna user terminals communicate with a cloud-computing based centralized processor (CP) through multi-antenna base-stations (BSs) serving as relay nodes. A compress-and-forward relaying strategy, named the VMAC scheme, is employed, in which the BSs can either perform single-user compression or Wyner-Ziv coding to quantize the received signals and send the quantization bits to the CP via capacity-limited fronthaul links; the CP performs succes…
The ensemble properties of Random Vector Quantization (RVQ) codebooks for limited-feedback beamforming in multi-input multi-output (MIMO) systems are studied with the metrics of interest being the received SNR loss and mutual information loss, both relative to a perfect channel state information (CSI) benchmark. The simplest case of unskewed codebooks is studied in the correlated MIMO setting and these loss metrics are computed as a function of the number of bits of feedback ($B$), transmit antenna dimension ($N_t$), and spatial correlation. In particular, it is established that: i) the loss m…
For the multiuser multiple-input multiple-output (MIMO) downlink channel, the users feedback their channel state information (CSI) to help the base station (BS) schedule users and improve the system sum rate. However, this incurs a large aggregate feedback bandwidth which grows linearly with the number of users. In this paper, we propose a novel scheme to reduce the feedback load in a downlink orthogonal space division multiple access (SDMA) system with zero-forcing receivers by allowing the users to dynamically determine the number of feedback bits to use according to multiple decision thresh…
Antenna arrays will be an important ingredient in millimeter wave (mmWave) cellular systems. A natural application of antenna arrays is simultaneous transmission to multiple users. Unfortunately, the hardware constraints in mmWave systems make it difficult to apply conventional lower frequency multiuser MIMO precoding techniques at mmWave. This paper develops low complexity hybrid analog/digital precoding for downlink multiuser mmWave systems. Hybrid precoding involves a combination of analog and digital processing that is inspired by the power consumption of complete radio frequency and mixed…
Channel state information (CSI) feedback is necessary for the frequency division duplexing (FDD) multiple input multiple output (MIMO) systems due to the channel non-reciprocity. With the help of deep learning, many works have succeeded in rebuilding the compressed ideal CSI for massive MIMO. However, simple CSI reconstruction is of limited practicality since the channel estimation and the targeted beamforming design are not considered. In this paper, a jointly optimized network is introduced for channel estimation and feedback so that a spectral-efficient beamformer can be learned. Moreover, …
Due to heavy reliance of millimeter-wave (mmWave) wireless systems on directional links, Beamforming (BF) with high-dimensional arrays is essential for cellular systems in these frequencies. How to perform the array processing in a power efficient manner is a fundamental challenge. Analog and hybrid BF require fewer analog-to-digital converters (ADCs), but can only communicate in a small number of directions at a time,limiting directional search, spatial multiplexing and control signaling. Digital BF enables flexible spatial processing, but must be operated at a low quantization resolution to …
We investigate uplink user scheduling for millimeter wave (mmWave) hybrid analog/digital beamforming systems with low-resolution analog-to-digital converters (ADCs). Deriving new scheduling criteria for the mmWave systems, we show that the channel structure in the beamspace, in addition to the channel magnitude and orthogonality, plays a key role in maximizing the achievable rates of scheduled users due to quantization error. The criteria show that to maximize the achievable rate for a given channel gain, the channels of the scheduled users need to have (1) as many propagation paths as possibl…
Beamforming techniques utilizing only partial channel state information (CSI) has gained popularity over other communication strategies requiring perfect CSI thanks to their lower feedback requirements. The amount of feedback in beamforming based communication systems can be further reduced through selective feedback techniques in which only the users with channels good enough are allowed to feed back by means of a decentralized feedback policy. In this paper, we prove that thresholding at the receiver is the rate-wise optimal decentralized feedback policy for feedback limited systems with pre…
In this paper, we investigate a coordinated multipoint (CoMP) beamforming and power control problem for base stations (BSs) with a massive number of antenna arrays under coarse quantization at low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Unlike high-resolution ADC and DAC systems, non-negligible quantization noise that needs to be considered in CoMP design makes the problem more challenging. We first formulate total power minimization problems of both uplink (UL) and downlink (DL) systems subject to signal-to-interference-and-noise ratio (SINR) con…
FPNet: Joint Wi-Fi Beamforming Matrix Feedback and Anomaly-Aware Indoor Positioning
FPNet通过联合优化波束成形反馈压缩与异常检测，实现高精度且可靠的室内定位。
This paper quantifies the information rate of multiple-input multiple-output (MIMO) systems with finite rate channel state feedback and power on/off strategy. In power on/off strategy, a beamforming vector (beam) is either turned on (denoted by on-beam) with a constant power or turned off. We prove that the ratio of the optimal number of on-beams and the number of antennas converges to a constant for a given signal-to-noise ratio (SNR) when the number of transmit and receive antennas approaches infinity simultaneously and when beamforming is perfect. Based on this result, a near optimal strate…
DJSCC-Enabled Multi-User Semantic CSI Feedback for Hybrid Beamforming in Dual-Polarized cmWave Massive MIMO
本文提出了一种基于MAXIM架构的深度学习方案，用于多用户厘米波MIMO-OFDM系统的联合语义CSI反馈和混合波束成形，通过端到端优化最大化下行链路总速率，同时利用深度联合源-信道编码（DJSCC）提升CSI压缩效率和抗噪能力。
In 3GPP new radio system, two types of codebook, namely Type-1 and Type-2 codebook, have been standardized for the channel state information (CSI) feedback in the support of advanced MIMO operation. Both types of codebook are constructed from 2-D DFT based grid of beams, and enable the CSI feedback of beam selection as well as PSK based co-phase combining between two polarizations. Moreover, Type-2 codebook based CSI feedback reports the wideband and subband amplitude information of the selected beams. As a result, it is envisioned that more accurate CSI shall be obtained from the Type-2 codeb…
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。