Distributed Beamforming in Wireless Multiuser Relay-Interference Networks with Quantized Feedback
Erdem Koyuncu, Hamid Jafarkhani
备注：
41 pages, 14 figures, submitted to IEEE Transactions on Information Theory, July 2010. This work was presented in part at IEEE Global Communications Conference (GLOBECOM), Nov. 2009
We study quantized beamforming in wireless amplify-and-forward relay-interference networks with any number of transmitters, relays, and receivers. We design the quantizer of the channel state information to minimize the probability that at least one receiver incorrectly decodes its desired symbol(s). Correspondingly, we introduce a generalized diversity measure that encapsulates the conventional one as the first-order diversity. Additionally, it incorporates the second-order diversity, which is concerned with the transmitter power dependent logarithmic terms that appear in the error rate expression. First, we show that, regardless of the quantizer and the amount of feedback that is used, the relay-interference network suffers a second-order diversity loss compared to interference-free networks. Then, two different quantization schemes are studied: First, using a global quantizer, we show that a simple relay selection scheme can achieve maximal diversity. Then, using the localization method, we construct both fixed-length and variable-length local (distributed) quantizers (fLQs and vLQs). Our fLQs achieve maximal first-order diversity, whereas our vLQs achieve maximal diversity. Moreover, we show that all the promised diversity and array gains can be obtained with arbitrarily low feedback rates when the transmitter powers are sufficiently large. Finally, we confirm our analytical findings through simulations.
In order to understand the key merits of multiuser diversity techniques in relay-assisted cellular multihop networks, this paper analyzes the spectral efficiency of opportunistic (i.e., channel-aware) scheduling algorithms over a fading multiuser relay channel with $K$ users in the asymptotic regime of large (but finite) number of users. Using tools from extreme-value theory, we characterize the limiting distribution of spectral efficiency focusing on Type I convergence and utilize it in investigating the large system behavior of the multiuser relay channel as a function of the number of users…
Relay-aided transmission is envisioned as a key strategy to combat severe path loss and link blockages emerging as unique challenges in millimeter-wave (mmWave) communications. This work considers a relay-aided multiuser mmWave communications scenario aiming at maximizing the sum rate through optimal transmit and relay precoder design. We propose a novel joint precoder design strategy, which exploits weighted minimum mean-square error (WMMSE) using its equivalency to sum-rate maximization. We obtain closed form expressions of transmit and relay precoders, and propose to compute them through al…
The goal of this paper is to understand the key merits of multihop relaying techniques jointly in terms of their energy efficiency and spectral efficiency advantages in the presence of multiuser diversity gains from opportunistic (i.e., channel-aware) scheduling and identify the regimes and conditions in which relay-assisted multiuser communication provides a clear advantage over direct multiuser communication. For this purpose, we use Shannon-theoretic tools to analyze the tradeoff between energy efficiency and spectral efficiency (known as the power-bandwidth tradeoff) over a fading multiuse…
This work considers relay assisted transmission for multiuser networks when the relay has no access to the codebooks used by the transmitters. The relay is called oblivious for this reason. Of particular interest is the generalized compress-and-forward (GCF) strategy, where the destinations jointly decode the compression indices and the transmitted messages, and their optimality in this setting. The relay-to-destination links are assumed to be out-of-band with finite capacity. Two models are investigated: the multiple access relay channel (MARC) and the interference relay channel (IFRC). For t…
This work focuses on studying the half-duplex (HD) relaying in the Multiple Access Relay Channel (MARC) and the Compound Multiple Access Channel with a Relay (cMACr). A generalized Quantize-and-Forward (GQF) has been proposed to establish the achievable rate regions. Such scheme is developed based on the variation of the Quantize-and-Forward (QF) scheme and single block with two slots coding structure. The results in this paper can also be considered as a significant extension of the achievable rate region of Half-Duplex Relay Channel (HDRC). Furthermore, the rate regions based on GQF scheme i…
This letter investigates the hybrid analog and digital beamforming (HBF) design for multiuser millimeter wave (mmWave) communication systems based on the minimum mean square error (MMSE) criterion. Using the alternating minimization method, the hybrid precoder of the base station (BS) and the hybrid combiners of the users are alternatively optimized. It is shown that both the optimized digital precoder of the BS and the digital combiners of the users have closed-form expressions, and their corresponding analog ones can be efficiently obtained via generalized eigen-decomposition. Simulation res…
In this paper we consider optimal multiuser downlink beamforming in the presence of a massive number of arbitrary quadratic shaping constraints. We combine beamforming with full-rate high dimensional real-valued orthogonal space time block coding (OSTBC) to increase the number of beamforming weight vectors and associated degrees of freedom in the beamformer design. The original multi-constraint beamforming problem is converted into a convex optimization problem using semidefinite relaxation (SDR) which can be solved efficiently. In contrast to conventional (rank-one) beamforming approaches in …
This letter investigates the joint active and passive beamforming optimization for intelligent reflecting surface (IRS) aided multiuser multiple-input multiple-output systems with the objective of maximizing the weighted sum-rate. We show that this problem can be solved via a matrix weighted mean square error minimization equivalence. In particular, for the optimization of the passive IRS beamforming, we first propose an iterative algorithm with excellent performance based on the manifold optimization. By using the matrix fractional programming technique to obtain a more tractable object funct…
We consider the opportunistic multiuser diversity in the multiuser two-way amplify-and-forward (AF) relay channel. The relay, equipped with multiple antennas and a simple zero-forcing beam-forming scheme, selects a set of two way relaying user pairs to enhance the degree of freedom (DoF) and consequently the sum throughput of the system. The proposed channel aligned pair scheduling (CAPS) algorithm reduces the inter-pair interference and keeps the signal to interference plus noise power ratio (SINR) of user pairs relatively interference free in average sense when the number of user pairs becom…
The problem of radio resource allocation for global energy efficiency (GEE) maximization in mmWaves large-scale multiple-input multiple-output (MIMO) systems using hybrid-beamforming with spatial modulation is addressed. The theoretical properties of the optimization problem at hand are analyzed and two provably convergent optimization algorithms with affordable complexity are proposed. The former achieves the global optimum, while the latter trades off optimality with a lower computational complexity. Nevertheless, numerical results show that both algorithms attain global optimality in practi…
In this paper, we investigate the scheduling scheme to combine cooperative diversity (CD) and multiuser diversity (MUD) in multiuser cooperative networks under the time resource allocation (TRA) framework in which the whole transmission is divided into two phases: the broadcast phase and the relay phase. The broadcast phase is for direct transmission whereas the relay phase is for relay transmission. Based on this TRA framework, a user selection based low complexity relay protocol (US-LCRP) is proposed to combine CD and MUD. In each time slot (TS) of the broadcast phase, a "best" user is selec…
This paper studies a downlink multiuser transmit beamforming design under spherical channel uncertainties, using a worst-case robust formulation. This robust design problem is nonconvex. Recently, a convex approximation formulation based on semidefinite relaxation (SDR) has been proposed to handle the problem. Curiously, simulation results have consistently indicated that SDR can attain the global optimum of the robust design problem. This paper intends to provide some theoretical insights into this important empirical finding. Our main result is a dual representation of the SDR formulation, w…
Two-way relaying can improve spectral efficiency in two-user cooperative communications. It also has great potential in multiuser systems. A major problem of designing a multiuser two-way relay system (MU-TWRS) is transceiver or precoding design to suppress co-channel interference. This paper aims to study linear precoding designs for a cellular MU-TWRS where a multi-antenna base station (BS) conducts bi-directional communications with multiple mobile stations (MSs) via a multi-antenna relay station (RS) with amplify-and-forward relay strategy. The design goal is to optimize uplink performance…
This study proposes a novel precoding scheme for multiuser multiple-input multiple-output (MIMO) relay systems in the presence of imperfect channel state information (CSI). The base station (BS) and the MIMO relay station (RS) are both equipped with the same codebook of unitary matrices. According to each element of the codebook, we create a latent precoding matrix pair, namely a BS precoding matrix and an RS precoding matrix. The RS precoding matrix is formed by multiplying the appropriate unitary matrix from the codebook by a power scaling factor. Based on the given CSI and a block of transm…
3D beamforming is a promising approach for interference coordination in cellular networks which brings significant improvements in comparison with conventional 2D beamforming techniques. This paper investigates the problem of joint beamforming design and tilt angle adaptation of the BS antenna array for maximizing energy efficiency (EE) in downlink of multi-cell multi-user coordinated cellular networks. An iterative algorithm based on fractional programming approach is introduced to solve the resulting non-convex optimization problem. In each iteration, users are clustered based on their eleva…
This paper considers a multiuser massive multiple-input multiple-output uplink with the help of an analog amplify-and-forward relay. The base station equips a large array of $N_d$ antennas but is supported by a far smaller number of radio-frequency chains. By first deriving new results for a cascaded phase-aligned two-hop channel, we obtain a tight bound for the ergodic rate in closed form for both perfect and quantized channel phase information. The rate is characterized as a function of a scaled equivalent signal-to-noise ratio of the two-hop channel. It implies that the source and relay pow…
This paper proposed new hybrid, analog-digital, beamforming for a multiuser millimeter wave (mm-wave) relay system. For this system, we consider a sum rate maximization problem. The proposed hybrid beamforming is designed indirectly by considering a sum mean square error (MSE) minimization problem while utilizing the solution of digital beamforming. To this end, we assume that the digital beamforming utilizes the well known block diagonalization (BD) approach. Under this assumption, we solve our problem as follows: First, we formulate the sum rate maximization problem as the minimization of th…
We solve a sum rate maximization problem of full-duplex (FD) multiuser multiple-input multiple-output (MU-MIMO) systems. Since additional self-interference (SI) in the uplink channel and co-channel interference (CCI) in the downlink channel are coupled in FD communication, the downlink and uplink multiuser beamforming vectors are required to be jointly designed. However, the joint optimization problem is non-convex and hard to solve due to the coupled effect. To properly address the coupled design issue, we reformulate the problem into an equivalent uplink channel problem, using the uplink and…
Reconfigurable intelligent surfaces (RIS) have drawn considerable attention recently due to their controllable scattering elements that are able to direct electromagnetic waves into desirable directions. Although RISs share some similarities with relays, the two have fundamental differences impacting their performance. To harness the benefits of both relaying and RISs, a multi-user communication system is proposed in this paper wherein a relay and an RIS cooperate to improve performance in terms of energy efficiency. To utilize the RIS efficiently, the discrete phase shifts of the RIS elements…
In this paper, collaborative use of relays to form a beamforming system and provide physical-layer security is investigated. In particular, amplify-and-forward (AF) relay beamforming designs under total and individual relay power constraints are studied with the goal of maximizing the secrecy rates when perfect channel state information (CSI) is available. In the AF scheme, not having analytical solutions for the optimal beamforming design under both total and individual power constraints, an iterative algorithm is proposed to numerically obtain the optimal beamforming structure and maximize t…
In this paper, we propose a full-duplex relay (FDR) based on a zero-forcing beamforming (ZFBF) for a multiuser MIMO relay system. The ZFBF is employed at the base station to suppress both the self-interference of the relay and the multiuser interference at the same time. Numerical results show that the proposed FDR can enhance the sum rate performance as compared to the half-duplex relay (HDR), if sufficient isolation between the transmit and receive antennas is ensured at the relay.
The paper considers two possible approaches, which enable multiple pairs of users to exchange information via multiple multi-antenna relays within one time-slot to save the communication bandwidth in low-latency communications. The first approach is to deploy full-duplexes for both users and relays to make their simultaneous signal transmission and reception possible. In the second approach the users use a fraction of a time slot to send their information to the relays and the relays use the remaining complementary fraction of the time slot to send the beamformed signals to the users. The inhe…
This paper deals with distributed beamforming techniques for wireless networks with half-duplex amplify-and-forward relays. Existing schemes optimize the beamforming weights based on the assumption that channel state information (CSI) is available at the relays. We propose to use adaptive beamforming based on deterministic perturbations and limited feedback (1-bit) from the destination to the relays in order to avoid CSI at the relays. Two scalable perturbation schemes are considered and practical implementation aspects are addressed. Simulation results confirm that the proposed techniques clo…
This paper examines linear beamforming methods for secure communications in a multiuser wiretap channel with a single transmitter, multiple legitimate receivers, and a single eavesdropper, where all nodes are equipped with multiple antennas. No information regarding the eavesdropper is presumed at the transmitter, and we examine both the broadcast MIMO downlink with independent information, and the multicast MIMO downlink with common information for all legitimate receivers. In both cases the information signal is transmitted with just enough power to guarantee a certain SINR at the desired re…
In this paper, a cognitive relay channel is considered, and amplify-and-forward (AF) relay beamforming designs in the presence of an eavesdropper and a primary user are studied. Our objective is to optimize the performance of the cognitive relay beamforming system while limiting the interference in the direction of the primary receiver and keeping the transmitted signal secret from the eavesdropper. We show that under both total and individual power constraints, the problem becomes a quasiconvex optimization problem which can be solved by interior point methods. We also propose two sub-optimal…
This paper presents joint maximum signal-to-interference-plus-noise ratio (MSINR) and relay selection algorithms for distributed beamforming. We propose a joint MSINR and restricted greedy search relay selection (RGSRS) algorithm with a total relay transmit power constraint that iteratively optimizes both the beamforming weights at the relays nodes, maximizing the SINR at the destination. Specifically, we devise a relay selection scheme that based on greedy search and compare it to other schemes like restricted random relay selection (RRRS) and restricted exhaustive search relay selection (RES…
In this paper, we investigate a multiuser relay system with simultaneous wireless information and power transfer. Assuming that both base station (BS) and relay station (RS) are equipped with multiple antennas, this work studies the joint transceiver design problem for the BS beamforming vectors, the RS amplify-and-forward transformation matrix and the power splitting (PS) ratios at the single-antenna receivers. Firstly, an iterative algorithm based on alternating optimization (AO) and with guaranteed convergence is proposed to successively optimize the transceiver coefficients. Secondly, a no…
Hybrid beamforming (HBF) includes analog beamforming with phase shifted array in RF domain and digital beamforming in baseband domain. Phase shifted array is usually made up with a large amount of phase shifters. Limited to the manufacturing techniques, phase shifters are unavoidable to have phaseshifting error and gain error. In the paper we study the influence of imperfect phase shifters upon the performance of multiuser mmWave massive MIMO systems1 with the wireless channel modeled by Rice fading. We derive the upper bound of the achievable sum rate with imperfect phase shifters, which can …
A full-duplex two-way relay channel with multiple antennas is considered. For this three-node network, the beamforming design needs to suppress self-interference. While a traditional way is to apply zero-forcing for self-interference mitigation, it may harm the desired signals. In this paper, a design which reserves a fraction of self-interference is proposed by solving a quality-of-service constrained beamforming design problem. Since the problem is challenging due to the loop self-interference, a convergence-guaranteed alternating optimization algorithm is proposed to jointly design the rela…
Energy efficient communication technology has attracted much attention due to the explosive growth of energy consumption in current wireless communication systems. In this letter we focus on fairness-based energy efficiency and aim to maximize the minimum user energy efficiency in the multicell multiuser joint beamforming system, taking both dynamic and static power consumptions into account. This optimization problem is a non-convex fractional programming problem and hard to tackle. In order to find its solution, the original problem is transformed into a parameterized polynomial subtractive …
In this paper, collaborative use of relays to form a beamforming system and provide physical-layer security is investigated. In particular, decode-and-forward (DF) and amplify-and-forward (AF) relay beamforming designs under total and individual relay power constraints are studied with the goal of maximizing the secrecy rates when perfect channel state information (CSI) is available. In the DF scheme, the total power constraint leads to a closed-form solution, and in this case, the optimal beamforming structure is identified in the low and high signal-to-noise ratio (SNR) regimes. The beamform…
Driven by the explosive growth of Internet of Things (IoT) devices with stringent requirements on latency and reliability, ultra-reliability and low latency communication (uRLLC) has become one of the three key communication scenarios for the fifth generation (5G) and beyond 5G communication systems. In this paper, we focus on the beamforming design problem for the downlink multiuser uRLLC systems. Since the strict demand on the reliability and latency, in general, short packet transmission is a favorable form for uRLLC systems, which indicates the literature Shannon's capacity formula is no l…
We reduce the problem of optimal beamforming for two-way relay (TWR) systems with perfect channel state infomation (CSI) that use analog network coding (ANC) to a pair of algebraic equations in two variables that can be solved inexpensively using numerical methods. The solution has greatly reduced complexity compared to previous exact solutions via semidefinite programming (SDP). Together with the linearized robust solution described in (Aziz and Thron, 2014), it provides a high-performance, low-complexity robust beamforming solution for 2-way relays.
In this paper, collaborative use of relays to form a beamforming system with the aid of perfect channel state information (CSI) and to provide physical-layer security is investigated. In particular, a decode-and-forward-based relay beamforming design subject to total and individual relay power constraints is studied with the goal of maximizing the secrecy rate. It is shown that the total power constraint leads to a closed-form solution. The design under individual relay power constraints is formulated as an optimization problem which is shown to be easily solved using two different approaches,…
With the dense deployment of the remote radio heads (RRHs), the huge network power consumption has become a great challenge for green cloud radio access networks (Cloud-RANs), and multiuser downlink beamforming has been proposed as a promising solution. Moreover, the increasing number of mobile users (MUs) causes that admission control is essential for Cloud-RAN with limited fronthaul capacity and predefined power budget. In this paper, we consider the problem of joint multiuser downlink beamforming and admission control (JBAC) to enhance the admitted MUs in the network and reduce the network …
In this paper, collaborative use of relays to form a beamforming system with the aid of perfect channel state information (CSI) and to provide communication in physicallayer security between a transmitter and two receivers is investigated. In particular, we describe decode-and-forward based null space beamforming schemes and optimize the relay weights jointly to obtain the largest secrecy rate region. Furthermore, the optimality of the proposed schemes is investigated by comparing them with the outer bound secrecy rate region
Reconfigurable intelligent surfaces (RIS) have drawn considerable attention recently due to their controllable scattering elements that are able to direct electromagnetic waves into desirable directions. Although RISs share some similarities with relays, the two have fundamental differences impacting their performance. To harness the benefits of both relaying and RISs, a multi-user communication system is proposed in this paper wherein a relay and an RIS cooperate to improve performance in terms of energy efficiency. Using singular value decomposition (SVD), semidefinite programming (SDP), and…
We consider the full-duplex (FD) two-way amplify-and-forward relay system with imperfect cancelation of loopback self-interference (SI) and investigate joint design of relay and receive beamforming for minimizing the mean square error under a relay transmit power constraint. Due to loopback channel estimation error and limitation of analog-to-digital converter, the loopback SI cannot be completely canceled. Multiple antennas at the relay can help loopback SI suppression but beamforming is required to balance between the residual SI suppression and the desired signal transmission. Moreover, the…
This paper studies a relay-assisted wireless powered communication network (R-WPCN) consisting of multiple source-destination pairs and a hybrid relay node (HRN). We consider a "charge-then-forward" protocol at the HRN, in which the HRN with constant energy supply first acts as an energy transmitter to charge the sources, and then forwards the information from the sources to their destinations through time division multiple access (TDMA) or frequency division multiple access (FDMA). Processing costs at the wireless-powered sources are taken into account. Our goal is to maximize the sum-rate of…
Wirelessly powered backscatter communication (WPBC) has been identified as a promising technology for low-power communication systems, which can reap the benefits of energy beamforming to improve energy transfer efficiency. However, existing studies on energy beamforming fail to simultaneously take energy supply and information transfer in WPBC into account. This paper takes the first step to fill this gap, by considering the restrictive relationship between the energy harvesting rate and achievable rate with estimated backscatter channel state information (BS-CSI). To ensure reliable communic…
Motivated by massive deployment of low data rate Internet of things (IoT) and ehealth devices with requirement for highly reliable communications, this paper proposes receive beamforming techniques for the uplink of a single-input multiple-output (SIMO) multiple access channel (MAC), based on a per-user probability of error metric and one-dimensional signalling. Although beamforming by directly minimizing probability of error (MPE) has potential advantages over classical beamforming methods such as zero-forcing and minimum mean square error beamforming, MPE beamforming results in a non-convex …
A two-phase beamforming solution for secure communication using untrusted relay nodes is presented. To thwart eavesdropping attempts of relay nodes, we deliberately introduce artificial noise in the source message. After pointing out the incongruity in evaluating secrecy rate in our model for certain scenarios, we provide an SNR based frame work for secure communication. We intend to bring down the SNR at each of the untrusted relay nodes below a certain predefined threshold, whereas, using beamforming we want to boost the SNR at the destination. With this motive optimal scaling vector is eval…
Transmit beamforming is a versatile technique for signal transmission from an array of $N$ antennas to one or multiple users [1]. In wireless communications, the goal is to increase the signal power at the intended user and reduce interference to non-intended users. A high signal power is achieved by transmitting the same data signal from all antennas, but with different amplitudes and phases, such that the signal components add coherently at the user. Low interference is accomplished by making the signal components add destructively at non-intended users. This corresponds mathematically to de…
Consider a simple two-way relaying channel where two single-antenna sources exchange information via a multiple-antenna relay. To such a scenario, all the existing works which can achieve full diversity order are based on the antenna/relay selection, where the difficulty to design the beamforming lies in the fact that a single beamformer needs to serve two destinations. In this paper, we propose a new full-diversity beamforming scheme which ensures that the relay signals are coherently combined at both destinations. Both analytical and numerical results are provided to demonstrate that this pr…
In this paper we aim to solve the multiuser multi-input multi-output (MIMO) downlink beamforming problem where one multi-antenna base station broadcasts data to many users. Each user is assigned multiple data streams and has multiple antennas at its receiver. Efficient solutions to the joint transmit-receive beamforming and power allocation problem based on iterative methods are proposed. We adopt the group maximum signal-to-interference-plus-noise-ratio (SINR) filter bank (GSINR-FB) as our beamformer which exploits receiver diversity through cooperation between the data streams of a user. The…
Recently, energy harvesting (EH) has emerged as a promising way to realize green communications. In this paper, we investigate the multiuser transmission network with an EH cooperative relay, where a source transmits independent information to multiple destinations with the help of an energy constrained relay. The relay can harvest energy from the radio frequency (RF) signals transmitted from the source, and it helps the multiuser transmission only by consuming the harvested energy. By adopting the time switching and the power-splitting relay receiver architectures, we firstly propose two prot…
Multiple transmitting antennas can considerably increase the downlink spectral efficiency by beamforming to multiple users at the same time. However, multiuser beamforming requires channel state information (CSI) at the transmitter, which leads to training overhead and reduces overall achievable spectral efficiency. In this paper, we propose and analyze a sequential beamforming strategy that utilizes full-duplex base station to implement downlink data transmission concurrently with CSI acquisition via in-band closed or open loop training. Our results demonstrate that full-duplex capability can…
To alleviate the high cost of hardware in mmWave systems, hybrid analog/digital precoding is typically employed. In the conventional two-stage feedback scheme, the analog beamformer is determined by beam search and feedback to maximize the desired signal power of each user. The digital precoder is designed based on quantization and feedback of effective channel to mitigate multiuser interference. Alternatively, we propose a one-stage feedback scheme which effectively reduces the complexity of the signalling and feedback procedure. Specifically, the second-order channel statistics are leveraged…
We investigate a relay network where a multiantenna source can potentially utilize an unauthenticated (untrusted) relay to augment its direct transmission of a confidential message to the destination. Since the relay is untrusted, it is desirable to protect the confidential data from it while simultaneously making use of it to increase the reliability of the transmission. We present a low-complexity scheme denoted as imbalanced beamforming based on linear beamforming and constellation mapping that ensures perfect physical-layer security even while utilizing the untrusted relay. Furthermore, th…
We consider a two-way relay network, where two source nodes, S1 and S2, exchange information through a cluster of relay nodes. The relay nodes receive the sum signal from S1 and S2 in the first time slot. In the second time slot, each relay node multiplies its received signal by a complex coefficient and retransmits the signal to the two source nodes, which leads to a distributed two-way beamforming system. By applying the principle of analog network coding, each receiver at S1 and S2 cancels the ``self-interference'' in the received signal from the relay cluster and decodes the message. This …
In this correspondence, we consider an amplify-and-forward relay network in which relayed information is overheard by an eavesdropper. In order to confound the eavesdropper, a wireless-powered jammer is also considered which harvests energy from a multiple-antenna source. We proposed a new secure beamforming scheme in which beamforming vector is a linear combination of the energy beamforming (EB) and information beamforming (IB) vectors. We also present a new closed-form solution for the proposed beamforming vector which is shown to achieve a higher secrecy rate as compared to the trivial EB a…
We consider a two-way relay network, where two source nodes, S1 and S2, exchange information through a cluster of relay nodes. The relay nodes receive the sum signal from S1 and S2 in the first time slot. In the second time slot, each relay node multiplies its received signal by a complex coefficient and retransmits the signal to the two source nodes, which leads to a collaborative two-way beamforming system. By applying the principle of analog network coding, each receiver at S1 and S2 cancels the "self-interference" in the received signal from the relay cluster and decodes the message. This …
In this paper, we investigate the problem of two-way relay beamforming optimization to maximize the achievable sum-rate of a simultaneous wireless information and power transfer (SWIPT) system with a full-duplex (FD) multiple-input multiple-output (MIMO) amplify-and-forward (AF) relay. In particular, we address the optimal joint design of the receiver power splitting (PS) ratio and the beamforming matrix at the relay node given the channel state information (CSI). Our contribution is an iterative algorithm based on difference of convex (DC) programming and one-dimensional searching to achieve …
In this paper, link selection for half-duplex buffer-aided relay systems is revisited. A new fixed scheduling policy referred as alternate distributed beamforming (ADB) is proposed, in which the relays are divided into two groups, with one group receiving the same information broadcast from the source and the other group transmitting the common messages to the destination via distributed beamforming in each time slot. It is worth noting that the relays used for reception and transmission are determined without the need of instantaneous channel state information (CSI). Theoretical analysis of t…
We analyze a MISO downlink channel where a multi-antenna transmitter communicates with a large number of single-antenna receivers. Using linear beamforming or nonlinear precoding techniques, the transmitter can serve multiple users simultaneously during each transmission slot. However, increasing the number of users, i.e., the multiplexing gain, reduces the beamforming gain, which means that the average of the individual data rates decreases and their variance increases. We use stochastic network calculus to analyze the queueing delay that occurs due to the time-varying data rates. Our results…
This is a companion technical report of the main manuscript "Semidefinite Relaxation and Approximation Analysis of a Beamformed Alamouti Scheme for Relay Beamforming Networks". The report serves to give detailed derivations of Lemma 1-2 in the main manuscript, which are too long to be included in the latter. In addition, more simulation results are presented to verify the viability of the BF Alamouti AF schemes developed in the main manuscript.
