Wirelessly powered backscatter communication (WPBC) has been identified as a promising technology for low-power communication systems, which can reap the benefits of energy beamforming to improve energy transfer efficiency. However, existing studies on energy beamforming fail to simultaneously take energy supply and information transfer in WPBC into account. This paper takes the first step to fill this gap, by considering the restrictive relationship between the energy harvesting rate and achievable rate with estimated backscatter channel state information (BS-CSI). To ensure reliable communication and user fairness, we formulate the energy beamforming design as a max-min optimization problem by maximizing the minimum achievable rate for all backscatter tags subject to the energy constraint. We derive the closed-form expression of the energy harvesting rate, as well as the lower bound of the achievable rate for maximum-ratio combining (MRC) and zero-forcing (ZF) receivers. Our numerical results indicate that our scheme significantly outperforms state-of-the-art energy beamforming schemes. Additionally, the achievable rate of our scheme approaches more than $90\%$ of the rate limit achieved via beamforming with perfect CSI for both receivers.
Wireless power transfer and backscatter communications have emerged as promising solutions for energizing and communicating with power limited devices. Despite some progress in wirelessly powered backscatter communications, the focus has been concentrated on backscatter and energy harvester. Recently, significant progress has been made on the design of transmit multisine waveform, adaptive to the Channel State Information at the transmitter (CSIT), in point-to-point backscatter system. In this paper, we leverage the work and study the design of transmit multisine waveform in a multiuser backsc…
Energy harvesting communication has raised great research interests due to its wide applications and feasibility of commercialization. In this paper, we investigate the multiuser energy diversity. Specifically, we reveal the throughput gain coming from the increase of total available energy harvested over time/space and from the combined dynamics of batteries. Considering both centralized and distributed access schemes, the scaling of the average throughput over the number of transmitters is studied, along with the scaling of corresponding available energy in the batteries.
The performance of cooperative ambient backscatter communications (CABC) can be enhanced by employing reconfigurable intelligent surface (RIS) to assist backscatter transmitters. Since the RIS power consumption is a non-negligible issue, we consider a RIS assisted CABC system where the RIS with energy harvesting circuit can not only reflect signal but also harvest wireless energy. We study a transmission design problem to minimize the RIS power consumption with the quality of service constraints for both active and backscatter transmissions. The optimization problem is a mixed-integer non-conv…
RF energy harvesting is a promising potential solution to provide convenient and perpetual energy supplies to low-power wireless sensor networks. In this paper, we investigate the energy harvesting performance of a wireless sensor node powered by harvesting RF energy from existing multiuser MIMO system. Specifically, we propose a random unitary beamforming (RUB) based cooperative beam selection scheme to enhance the energy harvesting performance at the sensor. Under a constant total transmission power constraint, the multiuser MIMO system tries to select a maximal number of active beams for da…
This paper considers max-min fairness for wireless energy transfer in a downlink multiuser communication system. Our resource allocation design maximizes the minimum harvested energy among multiple multiple-antenna energy harvesting receivers (potential eavesdroppers) while providing quality of service (QoS) for secure communication to multiple single-antenna information receivers. In particular, the algorithm design is formulated as a non-convex optimization problem which takes into account a minimum required signal-to-interference-plus-noise ratio (SINR) constraint at the information receive…
In this paper, we develop optimal energy-bandwidth allocation algorithms in fading channels for multiple energy harvesting transmitters, each may communicate with multiple receivers via orthogonal channels. We first assume that the side information of both the channel states and the energy harvesting states is known for $K$ time slots {\em a priori}, and the battery capacity and the maximum transmission power in each time slot are bounded. The objective is to maximize the weighted sum-rate of all transmitters over the $K$ time slots by assigning the transmission power and bandwidth for each tr…
We present an approach to solve the nonconvex optimization problem that arises when designing the transmit covariance matrices in multiuser multiple-input multiple-output (MIMO) broadcast networks implementing simultaneous wireless information and power transfer (SWIPT). The MIMO SWIPT problem is formulated as a general multi-objective optimization problem, in which data rates and harvested powers are optimized simultaneously. Two different approaches are applied to reformulate the (nonconvex) multi-objective problem. In the first approach, the transmitter can control the specific amount of po…
Recently, energy harvesting (EH) has emerged as a promising way to realize green communications. In this paper, we investigate the multiuser transmission network with an EH cooperative relay, where a source transmits independent information to multiple destinations with the help of an energy constrained relay. The relay can harvest energy from the radio frequency (RF) signals transmitted from the source, and it helps the multiuser transmission only by consuming the harvested energy. By adopting the time switching and the power-splitting relay receiver architectures, we firstly propose two prot…
In this paper, we consider the energy-bandwidth allocation for a network with multiple broadcast channels, where the transmitters access the network orthogonally on the assigned frequency band and each transmitter communicates with multiple receivers orthogonally or non-orthogonally. We assume that the energy harvesting state and channel gain of each transmitter can be predicted for $K$ slots {\em a priori}. To maximize the weighted throughput, we formulate an optimization problem with $O(MK)$ constraints, where $M$ is the number of the receivers, and decompose it into the energy and bandwidth…
In this paper, we study the downlink multiuser scheduling problem for systems with simultaneous wireless information and power transfer (SWIPT). We design optimal scheduling algorithms that maximize the long-term average system throughput under different fairness requirements, such as proportional fairness and equal throughput fairness. In particular, the algorithm designs are formulated as non-convex optimization problems which take into account the minimum required average sum harvested energy in the system. The problems are solved by using convex optimization techniques and the proposed opt…
In this paper, we introduce a new model for RF-powered cognitive radio networks with the aim to improve the performance for secondary systems. In our proposed model, when the primary channel is busy, the secondary transmitter is able either to backscatter the primary signals to transmit data to the secondary receiver or to harvest RF energy from the channel. The harvested energy then will be used to transmit data to the receiver when the channel becomes idle. We first analyze the tradeoff between backscatter communication and harvest-then-transmit protocol in the network. To maximize the overa…
In this paper, we investigate a multiuser relay system with simultaneous wireless information and power transfer. Assuming that both base station (BS) and relay station (RS) are equipped with multiple antennas, this work studies the joint transceiver design problem for the BS beamforming vectors, the RS amplify-and-forward transformation matrix and the power splitting (PS) ratios at the single-antenna receivers. Firstly, an iterative algorithm based on alternating optimization (AO) and with guaranteed convergence is proposed to successively optimize the transceiver coefficients. Secondly, a no…
Ambient backscatter communications (AmBackComs) have been recognized as a spectrum- and energy-efficient technology for Internet of Things, as it allows passive backscatter devices (BDs) to modulate their information into the legacy signals, e.g., cellular signals, and reflect them to their associated receivers while harvesting energy from the legacy signals to power their circuit operation. {\color{black} However, the co-channel interference between the backscatter link and the legacy link and the non-linear behavior of energy harvesters at the BDs have largely been ignored in the performance…
In this thesis, we study the downlink multiuser scheduling and power allocation problem for systems with simultaneous wireless information and power transfer (SWIPT). In the first part of the thesis, we focus on multiuser scheduling. We design optimal scheduling algorithms that maximize the long-term average system throughput under different fairness requirements, such as proportional fairness and equal throughput fairness. In particular, the algorithm designs are formulated as non-convex optimization problems which take into account the minimum required average sum harvested energy in the sys…
Unmanned aerial vehicle (UAV) has been widely adopted in wireless systems due to its flexibility, mobility, and agility. Nevertheless, a limited onboard battery greatly hinders UAV to prolong the serving time from communication tasks that need a high power consumption in active RF communications. Fortunately, caching and backscatter communication (BackCom) are appealing technology for energy efficient communication systems. This motivates us to investigate a wireless communication network with backscatter- and cache-assisted UAV technology. We assume a UAV with a cache memory is deployed as a …
In this work, we employ multiple energy harvesting relays to assist information transmission from a multi-antenna hybrid access point (HAP) to a receiver. All the relays are wirelessly powered by the HAP in the power-splitting (PS) protocol. We introduce the novel concept of hybrid relay communications, which allows each relay to switch between two radio modes, i.e., the active RF communications and the passive backscatter communications, according to its channel and energy conditions. We envision that the complement transmissions in two radio modes can be exploited to improve the overall rela…
This paper investigates robust and secure multiuser multiple-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can simultaneously reflect and harvest energy from the received signals. We study the joint design of beamformers at an access point (AP) and the phase shifts as well as the energy harvesting schedule at the IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the wireless energy harvesting capability of IRS elements, secure communications, a…
This paper investigates multiuser multi-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can harvest power from the received signals. We study the joint design of the beamformer at an access point (AP) and the phase shifts and the power harvesting schedule at an IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the capability of IRS elements to harvest wireless power for realizing self-sustainability. Subsequently, we propose a computationally-eff…
In this letter, we consider a wireless-powered backscatter communication (WP-BackCom) network, where the transmitter first harvests energy from a dedicated energy RF source in the sleep state, and then backscatters information and harvests energy simultaneously through a reflection coefficient. Our goal is to maximize the achievable energy efficiency of the WP-BackCom network via jointly optimizing time allocation, reflection coefficient and transmit power of the dedicated energy RF source. The optimization problem is non-convex and challenging to solve. We develop an efficient Dinkelbach-base…
Low-power ambient backscatter communication (AmBC) relying on radio-frequency (RF) energy harvesting is an energy-efficient solution for batteryless Internet of things (IoT). However, ambient backscatter signals are severely faded by dyadic backscatter channel (DBC), limiting connectivity in conventional orthogonal time-division-based AmBC (TD-AmBC). In order to support massive connectivity in AmBC, we propose sparse-coded AmBC (SC-AmBC) based on non-orthogonal signaling. Sparse code utilizes inherent sparsity of AmBC where power supplies of RF tags rely on ambient RF energy harvesting. Conseq…
In this paper, we study the optimal design for simultaneous wireless information and power transfer (SWIPT) in downlink multiuser orthogonal frequency division multiplexing (OFDM) systems. For information transmission, we consider two types of multiple access schemes, namely, time division multiple access (TDMA) and orthogonal frequency division multiple access (OFDMA). At the receiver side, due to the practical limitation that circuits for harvesting energy from radio signals are not yet able to decode the carried information directly, each user applies either time switching (TS) or power spl…
This letter introduces a novel wireless-powered backscatter communication system which allows sensors to utilize RF signals transmitted from a dedicated RF energy source to transmit data. In the proposed system, when the RF energy source transmits RF signals, the sensors are able to backscatter the RF signals to transmit date to the gateway and/or harvest energy from the RF signals for their operations. By integrating backscattering and energy harvesting techniques, we can optimize the network throughput of the system. In particular, we first formulate the time scheduling problem for the syste…
Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wireless information and power transfer (SWIPT) in a multiuser system. The users exploit power splitting (PS) to decode information and harvest energy simultaneously based on a realistic piecewise nonline…
In the fifth generation era, the pervasive applications of Internet of Things and massive machine-type communications have initiated increasing research interests on the backscatter wireless powered communication (B-WPC) technique due to its ultra high energy efficiency and low cost. The ubiquitous B-WPC network is characterized by nodes with dynamic spatial positions and sporadic short packets, of which the performance has not been fully investigated. In this paper, we give a comprehensive analysis of a multi-antenna B-WPC network with sporadic short packets under a stochastic geometry framew…
In this letter, we study a new technique for energy beamforming (EB) in multi-user networks, which combines large antenna retrodirectivity at the transmitter side with signal backscattering at the energy receivers. The proposed technique has low complexity and achieves EB without any active operation at the receivers or complicated signal processing techniques at the transmitter. Since the average harvested energy depends on the backscattering coefficients, we investigate different reflection policies for various design objectives. The proposed policies are analyzed from a system level standpo…
This paper considers an energy harvesting (EH) based multiuser mobile edge computing (MEC) system, where each user utilizes the harvested energy from renewable energy sources to execute its computation tasks via computation offloading and local computing. Towards maximizing the system's weighted computation rate (i.e., the number of weighted users' computing bits within a finite time horizon) subject to the users' energy causality constraints due to dynamic energy arrivals, the decision for joint computation offloading and local computing over time is optimized {\em over time}. Assuming that t…
In this paper, we propose a joint beamforming algorithm for a multiuser wireless information and power transfer (MU-WIPT) system that is compatible with the conventional multiuser multiple input multiple output (MU-MIMO) system. The proposed joint beamforming vectors are initialized using the well established MU-MIMO zero-forcing beamforming (ZFBF) and are further updated to maximize the total harvested energy of energy harvesting (EH) users and guarantee the signal to interference plus noise ratio (SINR) constraints of the co-scheduled information decoding (ID) users. When ID and EH users are…
Motivated by the recent advances in the Internet of Things (IoT) and in Wireless Power Transfer (WPT), we study a network architecture that consists of power beacons (PBs) and passive backscatter nodes (BNs). The PBs transmit a sinusoidal continuous wave (CW) and the BNs reflect back a portion of this signal while harvesting the remaining part. A BN harvests energy from multiple nearby PBs and modulates its information bits on the composite CW through backscatter modulation. The analysis poses real challenges due to the double fading channel, and its dependence on the PPPs of both the BNs and …
Intelligent reflecting surface (IRS) has recently been emerged as an effective way for improving the performance of wireless networks by reconfiguring the propagation environment through a large number of passive reflecting elements. This game-changing technology is especially important for stepping into the Internet of Everything (IoE) era, where high performance is demanded with very limited available resources. In this paper, we study a backscatter-assisted wireless powered communication network (BS-WPCN), in which a number of energy-constrained users, powered by a power station (PS), trans…
In this paper, we introduce a backscatter assisted wirelessly powered mobile edge computing (MEC) network, where each edge user (EU) can offload task bits to the MEC server via hybrid harvest-then-transmit (HTT) and backscatter communications. In particular, considering a practical non-linear energy harvesting (EH) model and a partial offloading scheme at each EU, we propose a scheme to maximize the weighted sum computation bits of all the EUs by jointly optimizing the backscatter reflection coefficient and time, active transmission power and time, local computing frequency and execution time …
Wireless power transfer (WPT) using energy beamforming is a promising solution for low power Internet of Things (IoT) devices. In this work, we consider WPT from an energy transmitter (ET) employing retrodirective WPT using a large phased antenna array to an energy receiver (ER) capable of ambient backscatter. The advantage of retrodirective WPT is that no explicit channel estimation is needed at the ET and the use of ambient backscattering eliminates the need for active transmission at the ER. We propose a training sequence design, i.e., pattern of varying the reflection coefficient at the ER…
One of the key challenges of the Internet of Things (IoT) is to sustainably power the large number of IoT devices in real-time. In this paper, we consider a wireless power transfer (WPT) scenario between an energy transmitter (ET) capable of retrodirective WPT and an energy receiver (ER) capable of ambient backscatter in the presence of an ambient source (AS). The ER requests WPT by backscattering signals from an AS towards the ET, which then retrodirectively beamforms an energy signal towards the ER. To remove the inherent direct-link ambient interference, we propose a scheme of ambient backs…
In this paper, we design a resource allocation algorithm for multiuser simultaneous wireless information and power transfer systems for a realistic non-linear energy harvesting (EH) model. In particular, the algorithm design is formulated as a non-convex optimization problem for the maximization of the long-term average total harvested power at EH receivers subject to quality of service requirements for information decoding receivers. To obtain a tractable solution, we transform the corresponding non-convex sum-of-ratios objective function into an equivalent objective function in parametric su…
For a massive multiple-input multiple-output (MIMO) system, restricting the number of RF chains to far less than the number of antenna elements can significantly reduce the implementation cost compared to the full complexity RF chain configuration. In this paper, we consider the downlink communication of a massive multiuser MIMO (MU-MIMO) system and propose a low-complexity hybrid block diagonalization (Hy-BD) scheme to approach the capacity performance of the traditional BD processing method. We aim to harvest the large array gain through the phase-only RF precoding and combining and then dig…
We study RF-enabled wireless energy transfer (WET) via energy beamforming, from a multi-antenna energy transmitter (ET) to multiple energy receivers (ERs) in a backscatter communication system, such as RFID, where each ER (or RFID tag) reflects back a portion of the incident signal to the ET (or RFID reader). For such a system, the acquisition of the forward-channel (i.e., ET-to-ER) state information (F-CSI) at the ET is challenging, since the ERs are typically too energy-and-hardware-constrained to estimate or feed back the F-CSI. The ET leverages its observed backscatter signals to estimate …
Self-sustainable communications based on advanced energy harvesting technologies have been under rapid development, which facilitate autonomous operation and energy-efficient transmission. Recently, ambient backscattering that leverages existing RF signal resources in the air has been invented to empower data communication among low-power devices. In this paper, we introduce hybrid device-to-device (D2D) communications by integrating ambient backscattering and wireless-powered communications. The hybrid D2D communications are self-sustainable, as no dedicated external power supply is required.…
Ambient backscatter is an intriguing wireless communication paradigm that allows small devices to compute and communicate by using only the power they harvest from radio-frequency (RF) signals in the air. Ambient backscattering devices reflect existing RF signals emitted by legacy communications systems, such as digital TV broadcasting, cellular or Wi-Fi ones, which would be otherwise treated as harmful sources of interference. This paper deals with the ultimate performance limits of ambient backscatter systems in broadband fading environments, by considering different amounts of network state…
This paper shows that wirelessly powered backscatter communications is subject to a fundamental tradeoff between the harvested energy at the tag and the reliability of the backscatter communication, measured in terms of SNR at the reader. Assuming the RF transmit signal is a multisine waveform adaptive to the channel state information, we derive a systematic approach to optimize the transmit waveform weights (amplitudes and phases) in order to enlarge as much as possible the SNRenergy region. Performance evaluations confirm the significant benefits of using multiple frequency components in the…
This paper studies optimal distributed power allocation and scheduling policies (DPASPs) for distributed total power and interference limited (DTPIL) cognitive multiple access networks in which secondary users (SU) independently perform power allocation and scheduling tasks using their local knowledge of secondary transmitter secondary base-station (STSB) and secondary transmitter primary base-station (STPB) channel gains. In such networks, transmission powers of SUs are limited by an average total transmission power constraint and by a constraint on the average interference power that SUs cau…
Unlike point-to-point cognitive radio, where the constraint imposed by the primary rigidly curbs the secondary throughput, multiple secondary users have the potential to more efficiently harvest the spectrum and share it among themselves. This paper analyzes the sum throughput of a multiuser cognitive radio system with multi-antenna base stations, either in the uplink or downlink mode. The primary and secondary have $N$ and $n$ users, respectively, and their base stations have $M$ and $m$ antennas, respectively. We show that an uplink secondary throughput grows with $\frac{m}{N +1}\log n$ if t…
In recent years, wireless communication systems are expected to achieve more cost-efficient and sustainable operations by replacing conventional fixed power supplies such as batteries with energy harvesting (EH) devices, which could provide electric energy from renewable energy sources (e.g., solar and wind). Such EH power supplies, however, are random and instable in nature, and as a result impose new challenges on reliable communication design and have triggered substantial research interests in EH based wireless communications. Building upon existing works, in this article, we develop a gen…
In this paper, we study the simultaneous wireless information and power transfer (SWIPT) in downlink multiuser orthogonal frequency-division multiple access (OFDMA) systems, where each user applies power splitting scheme to coordinate the energy harvesting and secrecy information decoding processes. Assuming equal power allocation across subcarriers, we formulate the problem to maximize the aggregate harvested power of all users while satisfying secrecy rate requirement of individual user by joint subcarrier allocation and optimal power splitting ratio selection. Due to the NP-hardness of the …
In this paper, we study resource allocation algorithm design for power efficient secure communication with simultaneous wireless information and power transfer (WIPT) in multiuser communication systems. In particular, we focus on power splitting receivers which are able to harvest energy and decode information from the received signals. The considered problem is modeled as an optimization problem which takes into account a minimum required signal-to-interference-plus-noise ratio (SINR) at multiple desired receivers, a maximum tolerable data rate at multiple multi-antenna potential eavesdropper…
In this paper, we investigate optimal scheme to manage time scheduling of different modules including spectrum sensing, radio frequency (RF) energy harvesting (RFH) and ambient backscatter communication (ABCom) by maximizing data transmission rate in the internet of things (IoT). We first consider using spectrum sensing with energy detection techniques to detect high power ambient RF signals, and then performing RFH and ABCom with them. Specifically, to improve the spectrum sensing efficiency, compressive sensing is used to detect the wideband RF singals. We propose a joint optimization proble…
Ambient backscatter communication (AmBC) enables wireless-powered backscatter devices (BDs) to transmit information over ambient radio-frequency (RF) carriers without using an RF transmitter, and thus has emerged as a promising technology for green Internet-of-Things. This paper considers an AmBC network in which a full-duplex access point (FAP) simultaneously transmits downlink orthogonal frequency division multiplexing (OFDM) signals to its legacy user (LU) and receives uplink signals backscattered from multiple BDs in a time-division-multiple-access manner. To enhance the system performance…
With the emerging Internet-of-Things services, massive machine-to-machine (M2M) communication will be deployed on top of human-to-human (H2H) communication in the near future. Due to the coexistence of M2M and H2H communications, the performance of M2M (i.e., secondary) network depends largely on the H2H (i.e., primary) network. In this paper, we propose ambient backscatter communication for the M2M network which exploits the energy (signal) sources of the H2H network, referring to traffic applications and popularity. In order to maximize the harvesting and transmission opportunities offered b…
Future Internet-of-Things (IoT) will connect billions of small computing devices embedded in the environment and support their device-to-device (D2D) communication. Powering this massive number of embedded devices is a key challenge of designing IoT since batteries increase the devices' form factors and their recharging/replacement is difficult. To tackle this challenge, we propose a novel network architecture that integrates wireless power transfer and backscatter communication, called wirelessly powered backscatter communication (WP-BC) networks. In this architecture, power beacons (PBs) are…
This paper considers a wireless powered multiuser mobile edge computing (MEC) system, in which a multi-antenna hybrid access point (AP) wirelessly charges multiple users, and each user relies on the harvested energy to execute computation tasks. We jointly optimize the energy beamforming and remote task execution at the AP, as well as the local computing and task offloading, aiming to minimize the total system energy consumption over a finite time horizon, subject to causality constraints for both energy harvesting and task arrival at the users. In particular, we consider a practical scenario …
In this paper, we investigate a multiuser distributed antenna system with simultaneous wireless information and power transmission under the assumption of imperfect channel state information (CSI). In this system, a distributed antenna port with multiple antennas supports a set of mobile stations who can decode information and harvest energy simultaneously via a power splitter. To design robust transmit beamforming vectors and the power splitting (PS) factors in the presence of CSI errors, we maximize the average worst-case signal-to-interference-plus- noise ratio (SINR) while achieving indivi…
Future Internet-of-Things (IoT) will connect billions of small computing devices embedded in the environment and support their device-to-device (D2D) communication. Powering this massive number of embedded devices is a key challenge of designing IoT since batteries increase the devices' form factors and battery recharging/replacement is difficult. To tackle this challenge, we propose a novel network architecture that enables D2D communication between passive nodes by integrating wireless power transfer and backscatter communication, which is called a wirelessly powered backscatter communicatio…
We study the beamforming design for multiuser systems with simultaneous wireless information and power transfer (SWIPT). Employing a practical non-linear energy harvesting (EH) model, the design is formulated as a non-convex optimization problem for the maximization of the minimum harvested power across several energy harvesting receivers. The proposed problem formulation takes into account imperfect channel state information (CSI) and a minimum required signal-to-interference-plus-noise ratio (SINR). The globally optimal solution of the design problem is obtained via the semidefinite programm…
Future Internet-of-Things (IoT) is expected to wirelessly connect billions of low-complexity devices. For wireless information transfer (WIT) in IoT, high density of IoT devices and their ad hoc communication result in strong interference which acts as a bottleneck on WIT. Furthermore, battery replacement for the massive number of IoT devices is difficult if not infeasible, making wireless energy transfer (WET) desirable. This motivates: (i) the design of full-duplex WIT to reduce latency and enable efficient spectrum utilization, and (ii) the implementation of passive IoT devices using backsc…
In the present contribution, we propose a novel opportunistic ambient backscatter communication (ABC) framework for radio frequency (RF)-powered cognitive radio (CR) networks. This framework considers opportunistic spectrum sensing integrated with ABC and harvest-then-transmit (HTT) operation strategies. Novel analytic expressions are derived for the average throughput, the average energy consumption and the energy efficiency in the considered set up. These expressions are represented in closed-form and have a tractable algebraic representation which renders them convenient to handle both anal…
This paper investigates simultaneous wireless information and power transfer (SWIPT) for multiuser multiple-input-single-output (MISO) secrecy channel. First, transmit beamfoming without artificial noise (AN) design is considered, where two secrecy rate optimization frameworks (i.e., secrecy rate maximization and harvested energy maximization) are investigated. These two optimization problems are not convex, and cannot be solved directly. For secrecy rate maximization problem, we employ bisection method to optimize the associated power minimization problem, and first-order Taylor series expans…
