Unmanned aerial vehicle (UAV) has been widely adopted in wireless systems due to its flexibility, mobility, and agility. Nevertheless, a limited onboard battery greatly hinders UAV to prolong the serving time from communication tasks that need a high power consumption in active RF communications. Fortunately, caching and backscatter communication (BackCom) are appealing technology for energy efficient communication systems. This motivates us to investigate a wireless communication network with backscatter- and cache-assisted UAV technology. We assume a UAV with a cache memory is deployed as a flying backscatter device (BD), term the UAV-enabled BD (UB), to relay the source's signals to the destination. Besides, the UAV can harvest energy from the source's RF signals and then utilizes it for backscattering information to the destination. In this context, we aim to maximize the total throughput by jointly optimizing the dynamic time splitting (DTS) ratio, backscatter coefficient, and the UB's trajectory with caching capability at the UB corresponding to linear energy harvesting (LEH) and non-linear energy harvesting (NLEH) models. These formulations are troublesome to directly solve since they are mixed-integer non-convex problems. To find solutions, we decompose the original problem into three subproblems, whereas we first optimize the DTS ratio for a given backscatter coefficient and UB's trajectory, followed by the backscatter coefficient optimization for a given DTS ratio and UB's trajectory, and the UB's trajectory is finally optimized for a given DTS ratio and backscatter coefficient. Finally, the intensive numerical results demonstrate that our proposed schemes achieve significant throughput gain in comparison to the benchmark schemes.
In this paper, we introduce a backscatter assisted wirelessly powered mobile edge computing (MEC) network, where each edge user (EU) can offload task bits to the MEC server via hybrid harvest-then-transmit (HTT) and backscatter communications. In particular, considering a practical non-linear energy harvesting (EH) model and a partial offloading scheme at each EU, we propose a scheme to maximize the weighted sum computation bits of all the EUs by jointly optimizing the backscatter reflection coefficient and time, active transmission power and time, local computing frequency and execution time …
This paper investigates unmanned aerial vehicle (UAV)-aided backscatter communication (BackCom) networks, where the UAV is leveraged to help the backscatter device (BD) forward signals to the receiver. Based on the presence or absence of a direct link between BD and receiver, two protocols, namely transmit-backscatter (TB) protocol and transmit-backscatter-relay (TBR) protocol, are proposed to utilize the UAV to assist the BD. In particular, we formulate the system throughput maximization problems for the two protocols by jointly optimizing the time allocation, reflection coefficient and UAV t…
We study RF-enabled wireless energy transfer (WET) via energy beamforming, from a multi-antenna energy transmitter (ET) to multiple energy receivers (ERs) in a backscatter communication system, such as RFID, where each ER (or RFID tag) reflects back a portion of the incident signal to the ET (or RFID reader). For such a system, the acquisition of the forward-channel (i.e., ET-to-ER) state information (F-CSI) at the ET is challenging, since the ERs are typically too energy-and-hardware-constrained to estimate or feed back the F-CSI. The ET leverages its observed backscatter signals to estimate …
Backscatter communication (BSC) is being realized as the core technology for pervasive sustainable Internet-of-Things applications. However, owing to the resource-limitations of passive tags, the efficient usage of multiple antennas at the reader is essential for both downlink excitation and uplink detection. This work targets at maximizing the achievable sum-backscattered-throughput by jointly optimizing the transceiver (TRX) design at the reader and backscattering coefficients (BC) at the tags. Since, this joint problem is nonconvex, we first present individually-optimal designs for the TRX …
One of the paramount advantages of multi-level cache-enabled (MLCE) networks is pushing contents proximity to the network edge and proactively caching them at multiple transmitters (i.e., small base-stations (SBSs), unmanned aerial vehicles (UAVs), and cache-enabled device-to-device (CE-D2D) users). As such, the fronthaul congestion between a core network and a large number of transmitters is alleviated. For this objective, we exploit network coding (NC) to schedule a set of users to the same transmitter. Focusing on this, we consider the throughput maximization problem that optimizes jointly …
The combination of backscatter communication with non-orthogonal multiple access (NOMA) has the potential to support low-powered massive connections in upcoming sixth-generation (6G) wireless networks. More specifically, backscatter communication can harvest and use the existing RF signals in the atmosphere for communication, while NOMA provides communication to multiple wireless devices over the same frequency and time resources. This paper has proposed a new resource management framework for backscatter-aided cooperative NOMA communication in upcoming 6G networks. In particular, the proposed…
Joint pushing and caching is recognized as an efficient remedy to the problem of spectrum scarcity incurred by tremendous mobile data traffic. In this paper, by exploiting storage resources at end users and predictability of user demand processes, we design the optimal joint pushing and caching policy to maximize bandwidth utilization, which is of fundamental importance to mobile telecom carriers. In particular, we formulate the stochastic optimization problem as an infinite horizon average cost Markov Decision Process (MDP), for which there generally exist only numerical solutions without man…
In the fifth generation era, the pervasive applications of Internet of Things and massive machine-type communications have initiated increasing research interests on the backscatter wireless powered communication (B-WPC) technique due to its ultra high energy efficiency and low cost. The ubiquitous B-WPC network is characterized by nodes with dynamic spatial positions and sporadic short packets, of which the performance has not been fully investigated. In this paper, we give a comprehensive analysis of a multi-antenna B-WPC network with sporadic short packets under a stochastic geometry framew…
Intelligent reflecting surface (IRS) has recently been emerged as an effective way for improving the performance of wireless networks by reconfiguring the propagation environment through a large number of passive reflecting elements. This game-changing technology is especially important for stepping into the Internet of Everything (IoE) era, where high performance is demanded with very limited available resources. In this paper, we study a backscatter-assisted wireless powered communication network (BS-WPCN), in which a number of energy-constrained users, powered by a power station (PS), trans…
In this paper, we leverage reinforcement learning (RL) and cross-layer network coding (CLNC) for efficiently pre-fetching users' contents to the local caches and delivering these contents to users in a downlink fog-radio access network (F-RAN) with device-to-device (D2D) communications. In the considered system, fog access points (F-APs) and cache-enabled D2D (CE-D2D) users are equipped with local caches for alleviating traffic burden at the fronthaul, while users' contents can be easily and quickly accommodated. In CLNC, the coding decisions take users' contents, their rates, and power levels…
We introduce a novel system setup where a backscatter device operates in the presence of an intelligent reflecting surface (IRS). In particular, we study the bistatic backscatter communication (BackCom) system assisted by an IRS. The phase shifts at the IRS are optimized jointly with the transmit beamforming vector of the carrier emitter to minimize the transmit power consumption at the carrier emitter whilst guaranteeing a required BackCom performance. The unique channel characteristics arising from multiple reflections at the IRS render the optimization problem highly non-convex. Therefore, …
Backscatter wireless communication is an emerging technique widely used in low-cost and low-power wireless systems, especially in passive radio frequency identification (RFID) systems. Recently, the requirement of high data rates, data reliability, and security drives the development of RFID systems, which motivates our investigation on the physical layer security of a multiple-input multiple-output (MIMO) RFID system. In this paper, we propose a noise-injection precoding strategy to safeguard the system security with the resource-constrained nature of the backscatter system taken into conside…
We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optimize the time/power allocations, local computing frequencies, execution times, backscattering coefficients, and RIS phase shifts.} This goal results in a multi-objective optimization problem (MOOP) wit…
Bistatic backscatter communication (BackCom) allows passive tags to transmit over extended ranges, but at the cost of having carrier emitters either transmitting at high powers or being deployed very close to tags. In this paper, we examine how the presence of an intelligent reflecting surface (IRS) could benefit the bistatic BackCom system. We study the transmit power minimization problem at the carrier emitter, where its transmit beamforming vector is jointly optimized with the IRS phase shifts, whilst guaranteeing a required BackCom performance. A unique feature in this system setup is the …
Prior works in designing caching policy do not distinguish content popularity with user preference. In this paper, we illustrate the caching gain by exploiting individual user behavior in sending requests. After showing the connection between the two concepts, we provide a model for synthesizing user preference from content popularity. We then optimize the caching policy with the knowledge of user preference and active level to maximize the offloading probability for cache-enabled device-to-device communications, and develop a low-complexity algorithm to find the solution. In order to learn us…
The emergence of novel interactive multimedia applications with high rate and low latency requirements has led to a drastic increase in the video data traffic over wireless cellular networks. Endowing the small base stations of a macro-cell with caches that can store some of the content is a promising technology to cope with the increasing pressure on the backhaul connections, and to reduce the delay for demanding video applications. In this work, delivery of an interactive multiview video to a set of wireless users is studied in an heterogeneous cellular network. Differently from existing wor…
Heterogeneous wireless networks (HetNets) provide a powerful approach to meet the dramatic mobile traffic growth, but also impose a significant challenge on backhaul. Caching and multicasting at macro and pico base stations (BSs) are two promising methods to support massive content delivery and reduce backhaul load in HetNets. In this paper, we jointly consider caching and multicasting in a large-scale cache-enabled HetNet with backhaul constraints. We propose a hybrid caching design consisting of identical caching in the macro-tier and random caching in the pico-tier, and a corresponding mult…
Caching popular contents at mobile devices, assisted by device-to-device (D2D) communications, is considered as a promising technique for mobile content delivery. It can effectively reduce backhaul traffic and service cost, as well as improving the spectrum efficiency. However, due to the selfishness of mobile users, incentive mechanisms will be needed to motivate device caching. In this paper, we investigate incentive mechanism design in cache-assisted D2D networks, taking advantage of the user mobility information. An inter-contact model is adopted to capture the average time between two con…
Caching and multicasting at base stations are two promising approaches to support massive content delivery over wireless networks. However, existing analysis and designs do not fully explore and exploit the potential advantages of the two approaches. In this paper, we consider the analysis and optimization of caching and multicasting in a large-scale cache-enabled wireless network. We propose a random caching and multicasting scheme with a design parameter. By carefully handling different types of interferers and adopting appropriate approximations, we derive a tractable expression for the suc…
In this manuscript, we present an energy-efficient alternating optimization framework based on the multi-antenna ambient backscatter communication (AmBSC) assisted cooperative non-orthogonal multiple access (NOMA) for next-generation (NG) internet-of-things (IoT) enabled communication networks. Specifically, the energy-efficiency maximization is achieved for the considered AmBSC-enabled multi-cluster cooperative IoT NOMA system by optimizing the active-beamforming vector and power-allocation coefficients (PAC) of IoT NOMA users at the transmitter, as well as passive-beamforming vector at the m…
Cache-enabled device-to-device (D2D) communications can boost network throughput. By pre-downloading contents to local caches of users, the content requested by a user can be transmitted via D2D links by other users in proximity. Prior works optimize the caching policy at users with the knowledge of content popularity, defined as the probability distribution of request for every file in a library from by all users. However, content popularity can not reflect the interest of each individual user and thus popularity-based caching policy may not fully capture the performance gain introduced by ca…
Symbiotic radio (SR) is emerging as a spectrum- and energy-efficient communication paradigm for future passive Internet-of-things (IoT), where some single-antenna backscatter devices, referred to as Tags, are parasitic in an active primary transmission. The primary transceiver is designed to assist both direct-link (DL) and backscatter-link (BL) communication. In multi-tags SR systems, the transceiver designs become much more complicated due to the presence of DL and inter-Tag interference, which further poses new challenges to the availability and reliability of DL and BL transmission. To ove…
