Relay-aided transmission is envisioned as a key strategy to combat severe path loss and link blockages emerging as unique challenges in millimeter-wave (mmWave) communications. This work considers a relay-aided multiuser mmWave communications scenario aiming at maximizing the sum rate through optimal transmit and relay precoder design. We propose a novel joint precoder design strategy, which exploits weighted minimum mean-square error (WMMSE) using its equivalency to sum-rate maximization. We obtain closed form expressions of transmit and relay precoders, and propose to compute them through alternating-optimization iterations without having to resort to complicated numerical optimization techniques. Numerical results verify the superiority of the proposed precoding strategy as compared to conventional precoding schemes.
In this paper, we solve the sum mean-squared error (MSE)-optimal 1-bit quantized precoding problem exactly for small-to-moderate sized multiuser multiple-input multiple-output (MU-MIMO) systems via branch and bound. To this end, we reformulate the original NP-hard precoding problem as a tree search and deploy a number of strategies that improve the pruning efficiency without sacrificing optimality. We evaluate the error-rate performance and the complexity of the resulting 1-bit branch-and-bound (BB-1) precoder, and compare its efficacy to that of existing, suboptimal algorithms for 1-bit preco…
Motivated by challenges to existing multiuser transmission methods in a low signal to noise ratio (SNR) regime, and emergence of massive numbers of low data rate ehealth and internet of things (IoT) devices, in this paper we show that it is beneficial to incorporate knowledge of modulation type into multiuser transmit precoder design. Particularly, we propose a transmit precoding (beamforming) specific to BPSK modulation, which has maximum power efficiency and capacity in poor channel conditions. To be more specific, in a multiuser scenario, an objective function is formulated based on the wei…
Hybrid precoding is a cost-effective approach to support directional transmissions for millimeter wave (mmWave) communications. While existing works on hybrid precoding mainly focus on single-user single-carrier transmission, in practice multicarrier transmission is needed to combat the much increased bandwidth, and multiuser MIMO can provide additional spatial multiplexing gains. In this paper, we propose a new hybrid precoding structure for multiuser OFDM mmWave systems, which greatly simplifies the hybrid precoder design and is able to approach the performance of the fully digital precoder.…
Joint user selection and precoding in multiuser MIMO settings can be interpreted as group sparse recovery in linear models. In this problem, a signal with group sparsity is to be reconstructed from an underdetermined system of equations. This paper utilizes this equivalent interpretation and develops a computationally tractable algorithm based on the method of group LASSO. Compared to the state of the art, the proposed scheme shows performance enhancements in two different respects: higher achievable sum-rate and lower interference at the non-selected user terminals.
This paper investigates the idea of exploiting interference among the simultaneous multiuser transmissions in the downlink of multiple antennas systems. Using symbol level precoding, a new approach towards addressing the multiuser interference is discussed through jointly utilizing the channel state information (CSI) and data information (DI). In this direction, the interference among the data streams is transformed under certain conditions to useful signal that can improve the signal to interference noise ratio (SINR) of the downlink transmissions. In this context, new constructive interferen…
Two-way relaying can improve spectral efficiency in two-user cooperative communications. It also has great potential in multiuser systems. A major problem of designing a multiuser two-way relay system (MU-TWRS) is transceiver or precoding design to suppress co-channel interference. This paper aims to study linear precoding designs for a cellular MU-TWRS where a multi-antenna base station (BS) conducts bi-directional communications with multiple mobile stations (MSs) via a multi-antenna relay station (RS) with amplify-and-forward relay strategy. The design goal is to optimize uplink performance…
In millimeter wave (mmWave) systems, antenna architecture limitations make it difficult to apply conventional fully digital precoding techniques but call for low cost analog radio-frequency (RF) and digital baseband hybrid precoding methods. This paper investigates joint RF-baseband hybrid precoding for the downlink of multiuser multi-antenna mmWave systems with a limited number of RF chains. Two performance measures, maximizing the spectral efficiency and the energy efficiency of the system, are considered. We propose a codebook based RF precoding design and obtain the channel state informati…
This paper studies the sum rate performance of a low complexity quantized CSI-based Tomlinson-Harashima (TH) precoding scheme for downlink multiuser MIMO tansmission, employing greedy user selection. The asymptotic distribution of the output signal to interference plus noise ratio of each selected user and the asymptotic sum rate as the number of users K grows large are derived by using extreme value theory. For fixed finite signal to noise ratios and a finite number of transmit antennas $n_T$, we prove that as K grows large, the proposed approach can achieve the optimal sum rate scaling of th…
Traditional approaches in the analysis of downlink systems decouple the precoding and the channel estimation problems. However, in cellular systems with mobile users, these two problems are in fact tightly coupled. In this paper, this coupling is explicitly studied by accounting for channel training overhead and estimation error while determining the overall system throughput. The paper studies the problem of utilizing imperfect channel estimates for efficient linear precoding and user selection. It presents precoding methods that take into account the degree of channel estimation error. Infor…
Tomlinson-Harashima precoding (THP) is considered as a prominent precoding scheme due to its capability to efficiently cancel out the known interference at the transmitter side. Therefore, the information rates achieved by THP are superior to those achieved by conventional linear precoding schemes. In this paper, a new lower bound on the achievable information rate for the regularized THP scheme under additive white Gaussian noise (AWGN) channel with multiuser interference is derived. Analytical results show that the lower bound derived in this paper is tighter than the original lower bound pa…
This study proposes a novel precoding scheme for multiuser multiple-input multiple-output (MIMO) relay systems in the presence of imperfect channel state information (CSI). The base station (BS) and the MIMO relay station (RS) are both equipped with the same codebook of unitary matrices. According to each element of the codebook, we create a latent precoding matrix pair, namely a BS precoding matrix and an RS precoding matrix. The RS precoding matrix is formed by multiplying the appropriate unitary matrix from the codebook by a power scaling factor. Based on the given CSI and a block of transm…
Low-resolution precoding techniques have gained considerable attention in the wireless communications area recently. Vital but hardly discussed in literature, discrete precoding in conjunction with channel coding is the subject of this study. Unlike prior studies, we propose three different soft detection methods and an iterative detection and decoding scheme that allow the utilization of channel coding in conjunction with low-resolution precoding. Besides an exact approach for computing the extrinsic information, we propose two approximations with reduced computational complexity. Numerical r…
Block diagonalization (BD) based precoding techniques are well-known linear transmit strategies for multiuser MIMO (MU-MIMO) systems. By employing BD-type precoding algorithms at the transmit side, the MU-MIMO broadcast channel is decomposed into multiple independent parallel single user MIMO (SU-MIMO) channels and achieves the maximum diversity order at high data rates. The main computational complexity of BD-type precoding algorithms comes from two singular value decomposition (SVD) operations, which depend on the number of users and the dimensions of each user's channel matrix. In this work…
This paper considers the implementation of Tomlinson-Harashima (TH) precoding for multiuser MIMO systems based on quantized channel state information (CSI) at the transmitter side. Compared with the results in [1], our scheme applies to more general system setting where the number of users in the system can be less than or equal to the number of transmit antennas. We also study the achievable average sum rate of the proposed quantized CSI-based TH precoding scheme. The expressions of the upper bounds on both the average sum rate of the systems with quantized CSI and the mean loss in average su…
This paper investigates the problem of interference among the simultaneous multiuser transmissions in the downlink of multiple antennas systems. Using symbol level precoding, a new approach towards the multiuser interference is discussed along this paper. The concept of exploiting the interference between the spatial multiuser transmissions by jointly utilizing the data information (DI) and channel state information (CSI), in order to design symbol-level precoders, is proposed. In this direction, the interference among the data streams is transformed under certain conditions to useful signal t…
Massive multiple-input multiple-output (MIMO) is envisioned to offer considerable capacity improvement, but at the cost of high complexity of the hardware. In this paper, we propose a low-complexity hybrid precoding scheme to approach the performance of the traditional baseband zero-forcing (ZF) precoding (referred to as full-complexity ZF), which is considered a virtually optimal linear precoding scheme in massive MIMO systems. The proposed hybrid precoding scheme, named phased-ZF (PZF), essentially applies phase-only control at the RF domain and then performs a low-dimensional baseband ZF pr…
Lenstra-Lenstra-Lovasz (LLL) algorithm, which is one of the lattice reduction (LR) techniques, has been extensively used to obtain better basis of the channel matrix. In this paper, we jointly apply Seysen's lattice reduction algorithm (SA), instead of LLL, with the conventional linear precoding algorithms. Since SA obtains more orthogonal lattice basis compared to that obtained by LLL, lattice reduction aided (LRA) precoding based on SA algorithm outperforms the LRA precoding with LLL. Simulation results demonstrate that a gain of 0.5dB at target BER of 10^-5 is achieved when SA is used inste…
The problem of radio resource allocation for global energy efficiency (GEE) maximization in mmWaves large-scale multiple-input multiple-output (MIMO) systems using hybrid-beamforming with spatial modulation is addressed. The theoretical properties of the optimization problem at hand are analyzed and two provably convergent optimization algorithms with affordable complexity are proposed. The former achieves the global optimum, while the latter trades off optimality with a lower computational complexity. Nevertheless, numerical results show that both algorithms attain global optimality in practi…
This paper considers minimum sum mean-squared error (sum-MSE) linear transceiver designs in multiuser downlink systems with imperfect channel state information. Specifically, we derive the optimal energy allocations for training and data phases for such a system. Under MMSE estimation of uncorrelated Rayleigh block fading channels with equal average powers, we prove the separability of the energy allocation and transceiver design optimization problems. A closed-form optimum energy allocation is derived and applied to existing transceiver designs. Analysis and simulation results demonstrate the…
We analytically approximate the expected sum capacity loss between the optimal downlink precoding technique of dirty paper coding (DPC), and the sub-optimal technique of zero-forcing precoding, for multiuser channels. We also consider the most general case of multi-stream transmission to multiple users, where we evaluate the expected sum capacity loss between DPC and block diagonalization precoding. Unlike previously, assuming heterogeneous Ricean fading, we utilize the well known affine approximation to predict the expected sum capacity difference between both precoder types (optimal and sub-…
In this paper, we study the hybrid precoding structures over limited feedback channels for massive multiuser multiple-input multiple-output (MIMO) systems. We focus on the system performance of hybrid precoding under a more realistic hardware network model, particularly, with inevitable dissipation. The effect of quantized analog and digital precoding is characterized. We investigate the spectral efficiencies of two typical hybrid precoding structures, i.e., the sub-connected structure and the fully-connected structure. It is revealed that increasing signal power can compensate the performance…
This paper focuses on the design of low complexity hybrid analog/digital precoding and diversity combining in millimeter wave (mmWave) Internet of things (IoT) systems. Firstly, by exploiting the sparseness property of the mmWave in the angular domain, we propose a spatial lobes division (SLD) to group the total paths of the mmWave channel into several spatial lobes, where the paths in each spatial lobe form a low-rank sub-channel. Secondly, based on the SLD operation, we propose a low complexity hybrid precoding scheme, named HYP-SLD. Specifically, for each low-rank sub-channel, we formulate …
Multiple-antenna systems is a key technique to serve multiple users in future wireless systems. For low energy consumption and hardware complexity we first consider transmit symbols with constant magnitude and then 1-bit digital-to-analog converters. We propose precoding designs which maximize the minimum distance to the decision threshold at the receiver. The precoding design with 1-bit DAC corresponds to a discrete optimization problem, which we solve exactly with a branch-and-bound strategy. We alternatively present an approximation based on relaxation. Our results show that the proposed br…
Millimeter wave (mmWave) massive MIMO can achieve orders of magnitude increase in spectral and energy efficiency, and it usually exploits the hybrid analog and digital precoding to overcome the serious signal attenuation induced by mmWave frequencies. However, most of hybrid precoding schemes focus on the full-array structure, which involves a high complexity. In this paper, we propose a near-optimal iterative hybrid precoding scheme based on the more realistic subarray structure with low complexity. We first decompose the complicated capacity optimization problem into a series of ones easier …
MIMO systems are considered as most promising for wireless communications. However, with an increasing number of radio front ends the corresponding energy consumption and costs become an issue, which can be relieved by the utilization of low-resolution quantizers. In this study we propose an optimal precoding algorithm constrained to constant envelope signals and phase quantization that maximizes the minimum distance to the decision threshold at the receivers using a branch-and-bound strategy. The proposed algorithm is superior to the existing methods in terms of bit error rate. Numerical resu…
In this letter, we study the performance of a downlink multiuser massive multiple-input multiple-output (MIMO) system with sub-connected structure over limited feedback channels. Tight rate approximations are theoretically analyzed for the system with pure analog precoding and hybrid precoding. The effect of quantized analog and digital precoding is characterized in the derived expressions. Furthermore, it is revealed that the pure analog precoding outperforms the hybrid precoding using maximal-ratio transmission (MRT) or zero forcing (ZF) under certain conditions, and we theoretically charact…
Generalized spatial modulation (GenSM) aided millimeter wave (mmWave) multiple-input multiple-output (MIMO) has recently received substantial academic attention. However, due to the insufficient exploitation of the transmitter's knowledge of the channel state information (CSI), the achievable rates of state-of-the-art GenSM-aided mmWave MIMO systems are far from being optimal. Against this background, a novel analog precoding scheme is proposed in this paper to improve the spectral efficiency (SE) of conventional GenSM-aided mmWave MIMOs. More specifically, we firstly manage to lower-bound the…
Large propagation path loss and limited scattering of millimeter wave (mmwave) channels create new challenges for physical layer signal processing. Hence, in this article, we propose a photonic hybrid precoding model for mmwave radio-over-fiber systems that overcomes hardware constraints on radio frequency precoding. With help of silicon photonic integrated circuits (Si-PICs), the photonic precoding strategy combats the large losses of mmwave and mitigates inter-user interference. Simulation results show that the proposed model can offer significant coding gains over conventional precoding sys…
This paper addresses the problem of exploiting interference among simultaneous multiuser transmissions in the downlink of multiple-antenna systems. Using symbol-level precoding, a new approach towards addressing the multiuser interference is discussed through jointly utilizing the channel state information (CSI) and data information (DI). The interference among the data streams is transformed under certain conditions to a useful signal that can improve the signal-to-interference noise ratio (SINR) of the downlink transmissions and as a result the system's energy efficiency. In this context, ne…
To perform multi-user multiple-input and multiple-output transmission in millimeter-wave(mmWave) cellular systems, the high-dimensional channels need to be estimated for designing the multi-user precoder. Conventional grid-based compressed sensing (CS) methods for mmWave channel estimation suffer from the basis mismatch problem, which prevents accurate channel reconstruction and degrades the precoding performance. This paper formulates mmWave channel estimation as an Atomic Norm Minimization (ANM) problem. In contrast to grid-based CS methods which use discrete dictionaries, ANM uses a continu…
We propose an algorithm to maximize the instantaneous sum data rate transmitted by a base station in the downlink of a multiuser multiple-input, multiple-output system. The transmitter and the receivers may each be equipped with multiple antennas and each user may receive more than one data stream. We show that maximizing the sum rate is closely linked to minimizing the product of mean squared errors (PMSE). The algorithm employs an uplink/downlink duality to iteratively design transmit-receive linear precoders, decoders, and power allocations that minimize the PMSE for all data streams under …
Millimeter wave (mmWave) signals experience orders-of-magnitude more pathloss than the microwave signals currently used in most wireless applications. MmWave systems must therefore leverage large antenna arrays, made possible by the decrease in wavelength, to combat pathloss with beamforming gain. Beamforming with multiple data streams, known as precoding, can be used to further improve mmWave spectral efficiency. Both beamforming and precoding are done digitally at baseband in traditional multi-antenna systems. The high cost and power consumption of mixed-signal devices in mmWave systems, how…
This paper considers the problem of constant envelope (CE) precoder designs for multiuser massive MISO downlink channels. The use of CE signals allows one to employ low-cost radio frequency chains and thereby facilitates the implementation of massive MIMO. However, the subsequent CE precoder designs are usually challenging owing to the non-convex CE constraints. The existing CE precoder designs consider minimization of some measures on the distortion levels of the received symbols, and they usually aim at improving the symbol-error rate (SER) performances. In this paper we formulate a minimum …
In the conventional multiuser MIMO systems, user selection and scheduling has previously been used as an effective way to increase the sum rate performance of the system. However, the recent concepts of the massive MIMO systems (at centimeter wavelength frequencies) have shown that with higher spatial resolution of antenna arrays different users in the dense scenarios can be spatially separated. This in turn significantly reduces the signal processing efforts required for multiuser selection algorithms. On the other hand, recent measurements at millimeter wave frequencies show that multipath c…
Massive deployment of low data rate Internet of things and ehealth devices prompts us to develop more practical precoding and user selection techniques that comply with these requirements. Moreover, it is known that when the data is real-valued and the observation is complex-valued, widely linear (WL) estimation can be employed in lieu of linear estimation to improve the performance. With these motivations, in this paper, we study the transmit precoding (beamforming) in multiuser multiple-input single-output communications systems assuming the transmit signal is one-dimensionally modulated and…
Precoding has been conventionally considered as an effective means of mitigating the interference and efficiently exploiting the available in the multiantenna downlink channel, where multiple users are simultaneously served with independent information over the same channel resources. The early works in this area were focused on transmitting an individual information stream to each user by constructing weighted linear combinations of symbol blocks (codewords). However, more recent works have moved beyond this traditional view by: i) transmitting distinct data streams to groups of users and ii)…
Hybrid analog/digital precoding offers a compromise between hardware complexity and system performance in millimeter wave (mmWave) systems. This type of precoding allows mmWave systems to leverage large antenna array gains that are necessary for sufficient link margin, while permitting low cost and power consumption hardware. Most prior work has focused on hybrid precoding for narrowband mmWave systems, with perfect or estimated channel knowledge at the transmitter. MmWave systems, however, will likely operate on wideband channels with frequency selectivity. Therefore, this paper considers wid…
Millimeter wave (mmWave) MIMO will likely use hybrid analog and digital precoding, which uses a small number of RF chains to avoid energy consumption associated with mixed signal components like analog-to-digital components not to mention baseband processing complexity. However, most hybrid precoding techniques consider a fully-connected architecture requiring a large number of phase shifters, which is also energyintensive. In this paper, we focus on the more energy-efficient hybrid precoding with sub-connected architecture, and propose a successive interference cancelation (SIC)-based hybrid …
Hybrid analog/digital precoding architectures can address the trade-off between achievable spectral efficiency and power consumption in large-scale MIMO systems. This makes it a promising candidate for millimeter wave systems, which require deploying large antenna arrays at both the transmitter and receiver to guarantee sufficient received signal power. Most prior work on hybrid precoding focused on narrowband channels and assumed fully-connected hybrid architectures. MmWave systems, though, are expected to be wideband with frequency selectivity. In this paper, a closed-form solution for fully…
Symbol-level precoding is a new paradigm for multiuser downlink systems which aims at creating constructive interference among the transmitted data streams. This can be enabled by designing the precoded signal of the multiantenna transmitter on a symbol level, taking into account both channel state information and data symbols. Previous literature has studied this paradigm for MPSK modulations by addressing various performance metrics, such as power minimization and maximization of the minimum rate. In this paper, we extend this to generic multi-level modulations i.e. MQAM and APSK by establis…
We present a mathematical analysis of linear precoders for downlink massive MIMO multiuser systems that employ one-bit digital-to-analog converters at the basestation in order to reduce complexity and mitigate power usage. The analysis is based on the Bussgang theorem, and applies generally to any linear precoding scheme. We examine in detail the special case of the quantized zero-forcing (ZF) precoder, and derive a simple asymptotic expression for the resulting symbol error rate at each terminal. Our analysis illustrates that the performance of the quantized ZF precoder depends primarily on t…
Aiming at maximizing the achievable sum-rate of wideband multiuser mmWave massive MIMO systems, the hybrid precoding is studied. Since each computation of the achievable sum-rate can be performed only after the analog precoder and digital precoder are both determined, the maximization of the achievable sum-rate has intractable computational complexity. By introducing the interference free (IF) achievable sum-rate, the design of the analog and digital precoders can be decoupled. To avoid the beam conflict and maximize the IF achievable sum-rate, a Hungarian-based codeword selection algorithm is…
Millimeter-wave (mmWave) communication is considered as an indispensable technique for the next-generation backhaul/fronthaul network thanks to its large transmission bandwidth. Especially for heterogeneous network (HetNet), the mmWave full-dimension (FD)-MIMO is exploited to establish the backhaul/fronthaul link between phantom-cell base stations (BSs) and macro-cell BSs, where an efficient precoding is prerequisite. Against this background, this paper proposes a principle component analysis (PCA)-based hybrid precoding for wideband mmWave MIMO backhaul/fronthaul channels. We first propose an…
Precoding design exploiting deep learning methods has been widely studied for multiuser multiple-input multiple-output (MU-MIMO) systems. However, conventional neural precoding design applies black-box-based neural networks which are less interpretable. In this paper, we propose a deep learning-based precoding method based on an interpretable design of a neural precoding network, namely iPNet. In particular, the iPNet mimics the classic minimum mean-squared error (MMSE) precoding and approximates the matrix inversion in the design of the neural network architecture. Specifically, the proposed …
Hybrid precoding design can be challenging for broadband millimeter-wave (mmWave) massive MIMO due to the frequency-flat analog precoder in radio frequency (RF). Prior broadband hybrid precoding work usually focuses on fully-connected array (FCA), while seldom considers the energy-efficient partially-connected subarray (PCS) including the fixed subarray (FS) and dynamic subarray (DS). Against this background, this paper proposes a machine learning based broadband hybrid precoding for mmWave massive MIMO with DS. Specifically, we first propose an optimal hybrid precoder based on principal compo…
Although the benefits of precoding and combining of data signals are widely recognized, the potential of these techniques for pilot transmission is not fully understood. This is particularly relevant for multiuser multiple-input multiple-output (MU-MIMO) cellular systems using millimeter-wave (mmWave) communications, where multiple antennas will have to be used both at the transmitter and the receiver to overcome the severe path loss. In this paper, we characterize the gains of pilot precoding and combining in terms of channel estimation quality and achievable data rate. Specifically, we consi…
This study proposes a symbol-level precoding algorithm based on the minimum mean squared error design objective under a strict per antenna power constraint for PSK modulation. The proposed design is then formulated in the standard form of a second-order cone program, allowing for an optimal solution via the interior point method. Numerical results indicate that the proposed design is superior to the existing approaches in terms of bit-error-rate for the low and intermediate SNR regime.
The application of hybrid precoding in millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems has been proved effective for reducing the number of radio frequency (RF) chains. However, the maximum number of independent data streams is conventionally restricted by the number of RF chains, which leads to limiting the spatial multiplexing gain. To further improve the achievable spectral efficiency (SE), in this paper we propose a novel generalized spatial modulation (GenSM) aided mmWave MIMO system to convey an extra data stream via the index of the active antennas group, while no…
Joint user selection (US) and vector precoding (US-VP) is proposed for multiuser multiple-input multiple-output (MU-MIMO) downlink. The main difference between joint US-VP and conventional US is that US depends on data symbols for joint US-VP, whereas conventional US is independent of data symbols. The replica method is used to analyze the performance of joint US-VP in the large-system limit, where the numbers of transmit antennas, users, and selected users tend to infinity while their ratios are kept constant. The analysis under the assumptions of replica symmetry (RS) and 1-step replica symm…
Millimeter-wave (mmWave) communications plays an important role for future cellular networks because of the vast amount of spectrum available in the underutilized mmWave frequency bands. To overcome the huge free space omnidirectional path loss in those frequency bands, the deployment of a very large number of antenna elements at the base station is crucial. The complexity, power consumption and costs resulting from the large number of antenna elements can be reduced by limiting the number of RF chains. This leads to hybrid precoding and combining, which, in contrast to the traditional fully d…
Transmitter (TX) cooperation at various levels has been shown to increase the sum throughput of multiuser multiple-input multiple-output (MIMO) systems. In this paper we consider a K-user MIMO system where TXs have only global channel state knowledge. It has been theoretically shown that interference alignment (IA) achieves the K/2 degrees of freedom of this K-user MIMO interference channel. However, results on IA and all proposed transceiver techniques for this channel up to date, assume conventional antenna arrays at the transceivers with multiple radio-frequency (RF) chains, each connected …
Consider the following problem: A multi-antenna base station (BS) sends multiple symbol streams to multiple single-antenna users via precoding. However, unlike conventional multiuser precoding, the transmitted signals are subjected to binary, unit-modulus, or even discrete unit-modulus constraints. Such constraints arise in the one-bit and constant-envelope (CE) massive MIMO scenarios, wherein high-resolution digital-to-analog converters (DACs) are replaced by one-bit DACs and phase shifters, respectively, for cutting down hardware cost and energy consumption. Multiuser precoding under one-bit…
This paper studies the optimal bit allocation for shape-gain vector quantization of wireless channels in multiuser (MU) multiple-input multiple-output (MIMO) downlink systems based on linear precoding. Our design minimizes the mean squared-error between the original and quantized channels through optimal bit allocation across shape (direction) and gain (magnitude) for a fixed feedback overhead per user. This is shown to significantly reduce the quantization error, which in turn, decreases the MU interference. This paper makes three main contributions: first, we focus on channel gain quantizati…
Power consumption of multi-user (MU) precoding is a major concern in all-digital massive MU multiple-input multiple-output (MIMO) base-stations with hundreds of antenna elements operating at millimeter-wave (mmWave) frequencies. We propose to replace part of the linear Wiener filter (WF) precoding matrix by a finite-alphabet WF precoding (FAWP) matrix, which enables the use of low-precision hardware that consumes low power and area. To minimize the performance loss of our approach, we present methods that efficiently compute FAWP matrices that best mimic the WF precoder. Our results show that …
Massive multi-user multiple-input multiple-output (MU-MIMO) wireless systems operating at millimeter-wave (mmWave) frequencies enable simultaneous wideband data transmission to a large number of users. In order to reduce the complexity of MU precoding in all-digital basestation architectures, we propose a two-stage precoding architecture that first performs precoding using a sparse matrix in the beamspace domain, followed by an inverse fast Fourier transform that converts the result to the antenna domain. The sparse precoding matrix requires a small number of multipliers and enables regular ha…
The high energy consumption of massive multi-input multi-out (MIMO) system has become a prominent problem in the millimeter wave(mm-Wave) communication scenario. The hybrid precoding technology greatly reduces the number of radio frequency(RF) chains by handing over part of the coding work to the phase shifting network, which can effectively improve energy efficiency. However, conventional hybrid precoding algorithms based on mathematical means often suffer from performance loss and high computational complexity. In this paper, a novel BP-neural-network-enabled hybrid precoding algorithm is pr…
