We investigate the close relationship between minimal surfaces in Euclidean 3-space and constant mean curvature 1 surfaces in hyperbolic 3-space. Just as in the case of minimal surfaces in Euclidean 3-space, the only complete connected embedded constant mean curvature 1 surfaces with two ends in hyperbolic space are well-understood surfaces of revolution -- the catenoid cousins. In contrast to this, we show that, unlike the case of minimal surfaces in Euclidean 3-space, there do exist complete connected immersed constant mean curvature 1 surfaces with two ends in hyperbolic space that are not surfaces of revolution -- the genus 1 catenoid cousins. The genus 1 catenoid cousins are of interest because they show that, although minimal surfaces in Euclidean 3-space and constant mean curvature 1 surfaces in hyperbolic 3-space are intimately related, there are essential differences between these two sets of surfaces (when the surfaces are considered globally). The proof we give of existence of the genus 1 catenoid cousins is a mathematically rigorous verification that the results of a computer experiment are sufficiently accurate to imply existence.
We present a basic introduction to the theories of Möbius structures and hyperbolic ends and we study their applications to the theory of $k$-surfaces in $3$-dimensional hyperbolic space.
We announce the classification of complete, almost embedded surfaces of constant mean curvature, with three ends and genus zero: they are classified by triples of points on the sphere whose distances are the asymptotic necksizes of the three ends.
We show that any complete, immersed self-expander to the inverse mean curvature flow, which has one end asymptotic to a cylinder, or has two ends asymptotic to two coaxial cylinders, must be rotationally symmetric.
We study graphs with nonnegative Bakry-Émery curvature or Ollivier curvature outside a finite subset. For such a graph, via introducing the discrete Gromov-Hausdorff convergence we prove that the space of bounded harmonic functions is finite dimensional, and as a corollary the number of non-parabolic ends is finite.
In this paper, we consider complete non-catenoidal minimal surfaces of finite total curvature with two ends. A family of such minimal surfaces with least total absolute curvature is given. Moreover, we obtain a uniqueness theorem for this family from its symmetries.
We establish a sharp geometric constant for the upper bound on the resonance counting function for surfaces with hyperbolic ends. An arbitrary metric is allowed within some compact core, and the ends may be of hyperbolic planar, funnel, or cusp type. The constant in the upper bound depends only on the volume of the core and the length parameters associated to the funnel or hyperbolic planar ends. Our estimate is sharp in that it reproduces the exact asymptotic constant in the case of finite-area surfaces with hyperbolic cusp ends, and also in the case of funnel ends with Dirichlet boundary con…
We give a mathematical foundation for, and numerical demonstration of, the existence of mean curvature 1 surfaces of genus 1 with either two elliptic ends or two hyperbolic ends in de Sitter 3-space. An end of a mean curvature 1 surface is an ``elliptic end'' (resp. a ``hyperbolic end'') if the monodromy matrix at the end is diagonalizable with eigenvalues in the unit circle (resp. in the reals). Although the existence of the surfaces is numerical, the types of ends are mathematically determined.
We prove the existence of a new class of constant mean curvature cylinders with an arbitrary number of umbilics by unitarizing the monodromy of Hill's equation.
We compute the flux of Killing fields through ends of constant mean curvature 1 in hyperbolic space, and we prove a result conjectured by Rossman, Umehara and Yamada : the flux matrix they have defined is equivalent to the flux of Killing fields. We next give a geometric description of embedded ends of finite total curvature. In particular, we show that we can define an axis for these ends that are asymptotic to a catenoid cousin. We also compute the flux of Killing fields through these ends, and we deduce some geometric properties and some analogies with minimal surfaces in Euclidean space.
In this paper we consider the conformal type (parabolicity or non-parabolicity) of complete ends of revolution immersed in simply connected space forms of constant sectional curvature. We show that any complete end of revolution in the $3$-dimensional Euclidean space or in the $3$-dimensional sphere is parabolic. In the case of ends of revolution in the hyperbolic $3$-dimensional space, we find sufficient conditions to attain parabolicity for complete ends of revolution using their relative position to the complete flat surfaces of revolution.
We study the spectral theory of asymptotically hyperbolic manifolds with ends of warped product type. Our main result is an upper bound on the resonance counting function with a geometric constant expressed in terms of the respective Weyl constants for the core of the manifold and the base manifold defining the ends.
In this paper we extend Efimov's Theorem by proving that any complete surface in $\mathbb{R}^3$ with Gauss curvature bounded above by a negative constant outside a compact set has finite total curvature, finite area and is properly immersed. Moreover, its ends must be asymptotic to half-lines. We also give a partial solution to Milnor's conjecture by studying isometric immersions in a space form of complete surfaces which satisfy that outside a compact set they have non positive Gauss curvature and the square of a principal curvature function is bounded from below by a positive constant.
With the developments of the last decade on complete constant mean curvature 1 (CMC 1) surfaces in the hyperbolic 3-space $H^3$, many examples of such surfaces are now known. However, most of the known examples have regular ends. (An end is irregular, resp. regular, if the hyperbolic Gauss map of the surface has an essential singularity, resp. at most a pole, there.) There are some known surfaces with irregular ends, but they are all either reducible or of infinite total curvature. (The surface is reducible if and only if the monodromy of the secondary Gauss map can be simultaneously diagonali…
The generalized Weierstrass representation is used to analyze the asymptotic behavior of a constant mean curvature surface that arises locally from an ordinary differential equation with a regular singularity. We prove that a holomorphic perturbation of an ODE that represents a Delaunay surface generates a constant mean curvature surface which has a properly immersed end that is asymptotically Delaunay. Furthermore, that end is embedded if the Delaunay surface is unduloidal.
We study constant mean curvature 1/2 surfaces in H2xR that admit a compactification of the mean curvature operator. We show that a particular family of complete entire graphs over H2 admits a structure of infinite dimensional manifold with local control on the behaviors at infinity. These graphs also appear to have a half-space property and we deduce a uniqueness result at infinity. Deforming non degenerate constant mean curvature 1/2 annuli, we provide a large class of (non rotational) examples and construct (possibly embedded) annuli without axis, i.e. with two vertical, asymptotically rotat…
In 1841, Delaunay constructed the embedded surfaces of revolution with constant mean curvature (CMC); these unduloids have genus zero and are now known to be the only embedded CMC surfaces with two ends and finite genus. Here, we construct the complete family of embedded CMC surfaces with three ends and genus zero; they are classified using their asymptotic necksizes. We work in a class slightly more general than embedded surfaces, namely immersed surfaces which bound an immersed three-manifold, as introduced by Alexandrov.
We construct a new class of complete constant mean curvature surfaces in R^3. These are geometrically different than the surfaces constructed by Kapouleas' gluing technique. These are obtained by piecing together half-Delaunay surfaces to the truncations of minimal k-noids. The gluing techniques are new: the surfaces are obtained by matching Cauchy data from the infinite dimensional family of exact solutions of the problem on each of the component pieces. These surfaces are also proved to be nondegenerate in the CMC moduli space.
The topological type of a non-compact Riemann surface is determined by its ends space and the ends having infinite genus. In this paper for a non-compact Riemann Surface $S_{m,s}$ with $s$ ends and exactly $m$ of them with infinite genus, such that $m,s\in \mathbb{N}$ and $1<m\leq s$, we give a precise description of the infinite set of generators of a Fuchsian (geometric Schottky) group $Γ_{m,s}$ such that the quotient space $\mathbb{H}/ Γ_{m, s}$ is homeomorphic to $S_{m,s}$ and has infinite area. For this construction, we exhibit a hyperbolic polygon with an infinite number of sides and giv…
We construct infinitely many examples of finite volume 4-manifolds with $T^3$ ends that do not admit any cusped asymptotically hyperbolic Einstein metrics yet satisfy a strict logarithmic version of the Hitchin-Thorpe inequality due to Dai-Wei. This is done by using estimates from Seiberg-Witten theory due to LeBrun as well as a method for constructing solutions to the Seiberg-Witten equations on noncompact manifolds due to Biquard. We also use constructions coming from the $Pin^-(2)$ monopole equations to obtain a larger class of manifolds where these techniques apply.
We prove that the ends of a properly immersed simply or one connected minimal surface in H(2)xR contained in a slab of height less than πof H(2)xR, are multi-graphs. When such a surface is embedded then the ends are graphs. When embedded and simply connected, it is an entire graph.
The ends of a complete embedded minimal surface of {\em finite total curvature} are well understood (every such end is asymptotic to a catenoid or to a plane). We give a similar characterization for a large class of ends of {\em infinite total curvature}, showing that each such end is asymptotic to a helicoid. The result applies, in particular, to the genus one helicoid and implies that it is embedded outside of a compact set in ${\mathbb R}^3$.
We show $ 10/8$-type inequalities for some end-periodic $4$-manifolds which have positive scalar curvature metrics on the ends. As an application, we construct a new family of closed $4$-manifolds which do not admit positive scalar curvature metrics.
Using the DPW method, we construct genus zero Alexandrov-embedded constant mean curvature (greater than one) surfaces with any number of Delaunay ends in hyperbolic space.
We consider constant mean curvature surfaces of finite topology, properly embedded in three-space in the sense of Alexandrov. Such surfaces with three ends and genus zero were constructed and completely classified by the authors in arXiv:math.DG/0102183. Here we extend the arguments to the case of an arbitrary number of ends, under the assumption that the asymptotic axes of the ends lie in a common plane: we construct and classify the entire family of these genus-zero coplanar constant mean curvature surfaces.
We show that any infinite-type surface without planar ends admits arbitrarily large families of length isospectral hyperbolic structures. If the surface has infinite genus and its space of ends is self-similar, we construct an uncountable family of isospectral and quasiconformally distinct hyperbolic structures.
In this paper we prove that a complete minimal surface immersed in H^2xR, with finite total curvature and two ends, each one asymptotic to a vertical geodesic plane, must be a horizontal catenoid. Moreover, we give a geometric description of minimal ends of finite total curvature in H^2xR. We also prove that a minimal complete end E with finite total curvature is properly immersed and that the Gaussian curvature of E is locally bounded in terms of the geodesic distance to its boundary.
A Ricci surface is defined as a Riemannian surface $(M,g_M)$ whose Gauss curvature satisfies the differential equation $KΔK + g_M(dK,dK) + 4K^3=0$. Andrei Moroianu and Sergiu Moroianu proved that a Ricci surface with non-positive Gauss curvature admits locally a minimal immersion into $\mathbb{R}^3$. In this paper, we are interested in studying non-compact orientable Ricci surfaces with catenoidal ends. We use an analogue of the Weierstrass data to obtain some classification results for such Ricci surfaces. We also give an existence result for positive genus Ricci surfaces with catenoidal ends…
We present a new construction of embedded minimal surfaces in hyperbolic space with $3$ asymptotically totally geodesic ends and arbitrary finite genus.
Embedded minimal surfaces of finite total curvature in $\mathbb{R}^3$ are reasonably well understood: From far away, they look like intersecting catenoids and planes, suitably desingularized. We consider the larger class of harmonic embeddings in $\mathbb{R}^{3}$ of compact Riemann surfaces with finitely many punctures where the harmonic coordinate functions are given as real parts of meromorphic functions. This paper is motivated by two outstanding features of such surfaces: They can have highly complicated ends, and they still have total Gauss curvature being a multiple of $2π$. This poses t…
We prove that any hyperbolic end with particles (cone singularities along infinite curves of angles less than $π$) admits a unique foliation by constant Gauss curvature surfaces. Using a form of duality between hyperbolic ends with particles and convex globally hyperbolic maximal (GHM) de Sitter spacetime with particles, it follows that any convex GHM de Sitter spacetime with particles also admits a unique foliation by constant Gauss curvature surfaces. We prove that the grafting map from the product of Teichmüller space with the space of measured laminations to the space of complex projective…
In this paper we produce families of complete non compact Riemannian metrics with positive constant $σ_k$-curvature by performing the connected sum of a finite number of given $n$-dimensional Delaunay type solutions, provided $2 \leq 2k < n$. The problem is equivalent to solve a second order fully nonlinear elliptic equation.
We give necessary conditions on complete embedded \cmc surfaces with three or four ends subject to reflection symmetries. The respective submoduli spaces are two-dimensional varieties in the moduli spaces of general \cmc surfaces. We characterize fundamental domains of our \cmc surfaces by associated great circle polygons in the three-sphere.
We find complete hypersurfaces of constant curvature in hyperbolic space with a prescribed asymptotic boundary at infinity for a general class of (elliptic) curvature functions which includes the higher order mean curvatures and their curvature quotients.
This paper extends, in a sharp way, the famous Efimov's Theorem to immersed ends in $\real^3$. More precisely, let $M$ be a non-compact connected surface with compact boundary. Then there is no complete isometric immersion of $M$ into $\Bbb R^3$ satisfying that $\int_M |K|=+\infty$ and $K\le-κ<0$, where $κ$ is a positive constant and $K$ is the Gaussian curvature of $M$. In particular Efimov's Theorem holds for complete Hadamard immersed surfaces, whose Gaussian curvature $K$ is bounded away from zero outside a compact set.
We investigate the problem of finding complete strictly convex hypersurfaces of constant curvature in hyperbolic space with a prescribed asymptotic boundary at infinity for a general class of curvature functions.
We investigate the existence, convergence and uniqueness of modified general curvature flow of convex hypersurfaces in hyperbolic space with a prescribed asymptotic boundary.
Given a complete isometric immersion $ϕ: P^m \longrightarrow N^n$ in an ambient Riemannian manifold $N^n$ with a pole and with radial sectional curvatures bounded from above by the corresponding radial sectional curvatures of a radially symmetric space $M^n_w$, we determine a set of conditions on the extrinsic curvatures of $P$ that guarantees that the immersion is proper and that $P$ has finite topology, in the line of the paper "On Submanifolds With Tamed Second Fundamental Form", (Glasgow Mathematical Journal, 51, 2009), authored by G. Pacelli Bessa and M. Silvana Costa. When the ambient ma…
We prove the existence of nonperiodic, properly embedded minimal surfaces in $\mathbb{R}^2\times\mathbb{S}^1$ with genus zero, infinitely many ends and one limit end (in particular, they have infinite total curvature).
Instituto de Matemática Pura e Aplicada-Instituto de Matemática e Estatística, Universidade Federal do Rio Grande do Sul（巴西联邦南里奥格兰德大学纯数学与应用数学研究所-数学与统计学院）
In this work, complete constant mean curvature 1 (CMC-1) surfaces in hyperbolic 3-space with total absolute curvature at most 4 pi are classified. This classification suggests that the Cohn-Vossen inequality can be sharpened for surfaces with odd numbers of ends, and a proof of this is given.
We construct constant mean curvature surfaces in euclidean space by gluing n half Delaunay surfaces to a non-degenerate minimal n-noid, using the DPW method.
We prove the existence of a complete locally Lipschitz continuous hypersurface in weak sense with prescribed Weingarten curvature and asymptotic boundary at infinity in hyperbolic space under certain assumptions.
A salami is a connected, locally finite, weighted graph with non-negative Ollivier Ricci curvature and at least two ends of infinite volume. We show that every salami has exactly two ends and no vertices with positive curvature. We moreover show that every salami is recurrent and admits harmonic functions with constant gradient. The proofs are based on extremal Lipschitz extensions, a variational principle and the study of harmonic functions. Assuming a lower bound on the edge weight, we prove that salamis are quasi-isometric to the line, that the space of all harmonic functions has finite dim…
This survey introduces to the hyperbolic unfolding correspondence that links the geometric analysis of minimal hypersurfaces with that of Gromov hyperbolic spaces. Problems caused from hypersurface singularities oftentimes become solvable on associated Gromov hyperbolic spaces. Applied to scalar curvature geometry this yields smoothing schemes that eliminate such singularities.
We consider properly immersed finite topology minimal surfaces S in complete finite volume hyperbolic 3-manifolds N, and in M x S(1), where M is a complete hyperbolic surface of finite area. We prove S has finite total curvature equal to 2πtimes the Euler characteristic of S, and we describe the geometry of the ends of S.
We shall investigate flat surfaces in hyperbolic 3-space with admissible singularities, called `flat fronts'. An Osserman-type inequality for complete flat fronts is shown. When equality holds in this inequality, we show that all the ends are embedded. Moreover, we shall give new examples for which equality holds.
A Lie hypersurface in the complex hyperbolic space is a homogeneous real hypersurface without focal submanifolds. The set of all Lie hypersurfaces in the complex hyperbolic space is bijective to a closed interval, which gives a deformation of homogeneous hypersurfaces from the ruled minimal one to the horosphere. In this paper, we study intrinsic geometry of Lie hypersurfaces, such as Ricci curvatures, scalar curvatures, and sectional curvatures.
In this paper we continue our study of finding the curvature flow of complete hypersurfaces in hyperbolic space with a prescribed asymptotic boundary at infinity. Our main results are proved by deriving a priori global gradient estimates and C^2 estimates.
We make observations about constant mean curvature surfaces in Euclidean 3-space and their dual surfaces, and the resulting pairs of surfaces in hyperbolic 3-space under the Lawson correspondence.
In this paper we investigate the convergence for the mean curvature flow of closed submanifolds with arbitrary codimension in space forms. Particularly, we prove that the mean curvature flow deforms a closed submanifold satisfying a pinching condition in a hyperbolic space form to a round point in finite time.
