We report on a proposal aimed at measuring the Casimir force in a cylinder-plane configuration. The Casimir force is evaluated including corrections due to finite parallelism, conductivity, and temperature. The range of validity of the proximity force approximation is also discussed. An apparatus to test the feasibility of a precision measurement in this configuration has been developed, and we describe both a procedure to control the parallelism and the results of the electrostatic calibration. Finally, we discuss the possibility of measuring the thermal contribution to the Casimir force and deviations from the proximity force approximation, both of which are expected at relatively large distances.
We discuss possibility to obtain stronger constraints on non-Newtonian gravity from measuring the gradient of the Casimir force between a cylinder and a plate. Exact analytical expression for the Yukawa-type force in a cylinder-plate configuration is obtained, as well as its asymptotic expansions. The gravitational force is compared with the Casimir force acting between a cylinder and a plate. Numerical computations for the prospective constraints on non-Newtonian gravity are performed for recently proposed experiment using a microfabricated cylinder attached to a micromachined oscillator. Spe…
In this work, we consider the Casimir effect due to massless fermionic fields in the presence of long cylinders. More precisely, we consider the interaction between a cylinder parallel to a plate, between two parallel cylinders outside each other, and between a cylinder lying parallelly inside another cylinder. We derive the explicit formulas for the Casimir interaction energies and compute the leading and the next-to-leading order terms of the small separation asymptotic expansions. As expected, the leading order terms coincide with the proximity force approximations. We compare the results o…
We study the finite temperature Casimir interaction between two concentric cylinders. When the separation between the cylinders is much smaller than the radii of the cylinders, the asymptotic expansions of the Casimir interaction are derived. Both the low temperature and the high temperature regions are considered. The leading terms are found to agree with the proximity force approximations. The low temperature leading term of the temperature correction is also computed and it is found to be independent of the boundary conditions imposed on the larger cylinder.
The Casimir force is the ultimate background in ongoing searches of extra-gravitational forces in the micrometer range. Eccentric cylinders offer favorable experimental conditions for such measurements as spurious gravitational and electrostatic effects can be minimized. Here we report on the evaluation of the exact Casimir interaction between perfectly conducting eccentric cylinders using a mode summation technique, and study different limiting cases of relevance for Casimir force measurements, with potential implications for the understanding of mechanical properties of nanotubes.
We derive exact expressions for the Casimir scalar interaction energy between media-separated eccentric dielectric cylinders and for the media-separated cylinder-plane geometry using a mode-summation approach. Similarly to the electromagnetic Casimir-Lifshitz interaction energy between fluid-separated planar plates, the force between cylinders is attractive or repulsive depending on the relative values of the permittivities of the three intervening media.
Motivated by the problem of Casimir energy, we investigate the idea of using inhomogeneity of surfaces instead of their corrugation, which leads to Casimir interaction between two inhomogeneous semi-transparent concentric cylinders. Using the multiple scattering method, we study the Casimir energy and torque between the cylinders with different potentials subjected to Dirichlet boundary conditions, both in weak and strong coupling regimes. We also extend our formalism to the case of two inhomogeneous dielectrics in a weak coupling regime.
The scattering theory approach makes it possible to carry out exact calculations of Casimir energies in any geometry for which the scattering T-matrix and a partial wave expansion of the free Green's function are available. We implement this program for the case of a perfectly conducting elliptic cylinder, thereby completing the set of geometries where electromagnetic scattering is separable. Particular emphasis is placed on the case of zero radius, where the elliptic cylinder reduces to a strip.
We consider the Casimir interaction between a cylinder and a hollow cylinder, both conducting, with parallel axis and slightly different radii. The Casimir force, which vanishes in the coaxial situation, is evaluated for both small and large eccentricities using the proximity approximation. The cylindrical configuration offers various experimental advantages with respect to the parallel planes or the plane-sphere geometries, leading to favourable conditions for the search of extra-gravitational forces in the micrometer range and for the observation of finite temperature corrections.
We use the mode summation method together with zeta-function regularization to compute the Casimir energy of a dilute dielectric cylinder. The method is very transparent, and sheds light on the reason the resulting energy vanishes.
Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, via a method to compute Casimir torques for finite objects. Furthermore, the stable orientation of the square cylinder is shown to undergo an unusual 45 degrees transition as a function of the separation…
We investigate the Casimir force between a microfabricated elliptic cylinder (cylindrical lens) and a plate made of real materials. After a brief discussion of the fabrication procedure, which typically results in elliptic rather than circular cylinders, the Lifshitz-type formulas for the Casimir force and for its gradient are derived. In the specific case of equal semiaxes, the resulting formulas coincide with those derived previously for circular cylinders. The nanofabrication procedure may also result in asymmetric cylindrical lenses obtained from parts of two different cylinders, or rotate…
We study the Casimir pressure for a dielectric-diamagnetic cylinder subject to light velocity conservation and with a dispersion law analogous to Sellmeir's rule. Similarities to and differences from the spherical case are pointed out.
We compute the Casimir interaction energy between two perfectly conducting, concentric cylinders, using the mode-by-mode summation technique. Then we compare it with the approximate results obtained using the proximity theorem and a semiclassical approximation based on classical periodic orbits. We show that the proximity theorem with a particular choice for the effective area coincides with the semiclassical approximation and reproduces the exact result far beyond its expected range of validity. We also compute the force between slightly eccentric cylinders and discuss the advantages of using…
The Casimir interaction between two perfectly conducting, infinite, concentric cylinders is computed using a semiclassical approximation that takes into account families of classical periodic orbits that reflect off both cylinders. It is then compared with the exact result obtained by the mode-by-mode summation technique. We analyze the validity of the semiclassical approximation and show that it improves the results obtained through the proximity theorem.
The Casimir energy of a dilute dielectric cylinder, with the same light-velocity as in its surrounding medium, is evaluated exactly to first order in $ξ^2$ and numerically to higher orders in $ξ^2$. The first part is carried out using addition formulas for Bessel functions, and no Debye expansions are required.
The Casimir interaction between one-dimensional metallic objects (cylinders, wires) displays unconventional features. Here we study the orientation dependence of this interaction by computing the Casimir energy between two inclined cylinders over a wide range of separations. We consider Dirichlet, Neumann and perfect metal boundary conditions, both at zero temperature and in the classical high temperature limit. For all types of boundary conditions, we find that at large distances the interaction decays slowly with distance, similarly to the case of parallel cylinders, and at small distances s…
An exact calculation of electromagnetic scattering from a perfectly conducting parabolic cylinder is employed to compute Casimir forces in several configurations. These include interactions between a parabolic cylinder and a plane, two parabolic cylinders, and a parabolic cylinder and an ordinary cylinder. To elucidate the effect of boundaries, special attention is focused on the "knife-edge" limit in which the parabolic cylinder becomes a half-plane. Geometrical effects are illustrated by considering arbitrary rotations of a parabolic cylinder around its focal axis, and arbitrary translations…
We numerically evaluate the Casimir interaction energy for configurations involving two perfectly conducting eccentric cylinders and a cylinder in front of a plane. We consider in detail several special cases. For quasi-concentric cylinders, we analyze the convergence of a perturbative evaluation based on sparse matrices. For concentric cylinders, we obtain analytically the corrections to the proximity force approximation up to second order, and we present an improved numerical procedure to evaluate the interaction energy at very small distances. Finally, we consider the configuration of a cyl…
We study the Casimir interaction between a sphere and a cylinder both subjected to Dirichlet, Neumann or perfectly conducting boundary conditions. Generalizing the operator approach developed by Wittman [IEEE Trans. Antennas Propag. 36, 1078 (1988)], we compute the scalar and vector translation matrices between a sphere and a cylinder, and thus write down explicitly the exact TGTG formula for the Casimir interaction energy. In the scalar case, the formula shows manifestly that the Casimir interaction force is attractive at all separations. Large separation leading term of the Casimir interacti…
We find the exact Casimir force between a plate and a cylinder, a geometry intermediate between parallel plates, where the force is known exactly, and the plate--sphere, where it is known at large separations. The force has an unexpectedly weak decay \sim L/(H^3 \ln(H/R)) at large plate--cylinder separations H (L and R are the cylinder length and radius), due to transverse magnetic modes. Path integral quantization with a partial wave expansion additionally gives a qualitative difference for the density of states of electric and magnetic modes, and corrections at finite temperatures.
We report on measurements performed on an apparatus aimed to study the Casimir force in the cylinder-plane configuration. The electrostatic calibrations evidence anomalous behaviors in the dependence of the electrostatic force and the minimizing potential upon distance. We discuss analogies and differences of these anomalies with respect to those already observed in the sphere-plane configuration. At the smallest explored distances we observe frequency shifts of non-Coulombian nature preventing the measurement of the Casimir force in the same range. We also report on measurement performed in t…
We investigate the possibility of measuring the thermal Casimir force and its gradient in the configuration of a plate and a microfabricated cylinder attached to a micromachined oscillator. The Lifshitz-type formulas in this configuration are derived using the proximity force approximation. The accuracy for the obtained expressions is determined from a comparison with exact results available in ideal metal case. Computations of the thermal correction to both the Casimir force and its gradient are performed in the framework of different theoretical approaches proposed in the literature. The cor…
In this paper we calculate the Casimir energy for a dielectric-diamagnetic cylinder with the speed of light differing on the inside and outside. Although the result is in general divergent, special cases are meaningful. The well-known results for a uniform speed of light are reproduced. The self-stress on a purely dielectric cylinder is shown to vanish through second order in the deviation of the permittivity from its vacuum value, in agreement with the result calculated from the sum of van der Waals forces.These results are unambiguously separated from divergent terms.
We study the finite temperature Casimir interaction between a cylinder and a plate using the exact formula derived from the Matsubara representation and the functional determinant representation. We consider the scalar field with Dirichlet and Neumann boundary conditions. The asymptotic expansions of the Casimir energy and the Casimir force when the separation $a$ between the cylinder and the plate is small are derived. As in the zero temperature case, it is found that the leading terms of the Casimir energy and the Casimir force agree with those derived from the proximity force approximation …
We consider the small separation asymptotic expansions of the Casimir interaction energy and the Casimir interaction force between two parallel cylinders. The leading order terms and the next-to-leading order terms are computed analytically. Four combinations of boundary conditions are considered, which are Dirichlet-Dirichlet (DD), Neumann-Neumann (NN), Dirichlet-Neumann (DN) and Neumann-Dirichlet (ND). For the case where one cylinder is inside another cylinder, the computations are shown in detail. In this case, we restrict our attention to the situation where the cylinders are strictly ecce…
We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most…
We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2πnaT$, $a$ being the …
We study Casimir interactions between cylinders in thermal non-equilibrium, where the objects as well as the environment are held at different temperatures. We provide the general formula for the force, in a one reflection approximation, for cylinders of arbitrary radii and optical properties. As is the case for equilibrium, we find that the force for optically diluted cylinders can be obtained by appropriate summation of the corresponding result for spheres. We find that the non-equilibrium forces are generally larger than their equilibrium counterpart at separations greater than the thermal …
We review recent work on the Casimir interaction energy between cylindrical shells. We include proposals for future experiments involving cylinders, such us a null experiment using quasi-concentric cylinders, a cylinder in front a conducting plate, and a cylindrical version of the rack and pinion powered by Casimir lateral force. We also present an exact formula for the theoretical evaluation of the vacuum interaction energy between eccentric cylindrical shells, and describe improved analytical and numerical evaluations for the particular case of concentric cylinders.
We calculate the exact Casimir interaction energy between two perfectly conducting, very long, eccentric cylindrical shells using a mode summation technique. Several limiting cases of the exact formula for the Casimir energy corresponding to this configuration are studied both analytically and numerically. These include concentric cylinders, cylinder-plane, and eccentric cylinders, for small and large separations between the surfaces. For small separations we recover the proximity approximation, while for large separations we find a weak logarithmic decay of the Casimir interaction energy, typ…
A multiple scattering formulation is used to calculate the force, arising from fluctuating scalar fields, between distinct bodies described by $δ$-function potentials, so-called semitransparent bodies. (In the limit of strong coupling, a semitransparent boundary becomes a Dirichlet one.) We obtain expressions for the Casimir energies between disjoint parallel semitransparent cylinders and between disjoint semitransparent spheres. In the limit of weak coupling, we derive power series expansions for the energy, which can be exactly summed, so that explicit, very simple, closed-form expressions a…
We use a point-matching approach to numerically compute the Casimir interaction energy for a two perfect-conductor waveguide of arbitrary section. We present the method and describe the procedure used to obtain the numerical results. At first, our technique is tested for geometries with known solutions, such as concentric and eccentric cylinders. Then, we apply the point-matching technique to compute the Casimir interaction energy for new geometries such as concentric corrugated cylinders and cylinders inside conductors with focal lines.
Casimir-Polder potential is investigated for a polarizable microparticle in the geometry of a straight cosmic string with a metallic cylindrical shell. The electromagnetic field Green tensor is evaluated on the imaginary frequency axis. The expressions for the Casimir-Polder potential is derived in the general case of anisotropic polarizability for the both interior and exterior regions of the shell. The potential is decomposed into pure string and shell-induced parts. The latter dominates for points near the shell, whereas the pure string part is dominant near the string and at large distance…
New exact results are given for the interior Casimir energies of infinitely long waveguides of triangular cross section (equilateral, hemiequilateral, and isosceles right triangles). Results for cylinders of rectangular cross section are rederived. In particular, results are obtained for interior modes belonging to Dirichlet and Neumann boundary conditions (TM and TE modes). These results are expressed in rapidly convergent series using the Chowla-Selberg formula, and in fact may be given in closed form, except for general rectangles. The energies are finite because only the first three heat-k…
Recently the Lifshitz theory of dispersion forces was extended for the case of an atom (molecule) interacting with a plane surface of a uniaxial crystal or with a long solid cylinder or cylindrical shell made of isotropic material or uniaxial crystal. The obtained results are applicable to nanosystems. In particular, we investigate the Casimir-Polder interaction between hydrogen atoms (molecules) and multi-wall carbon nanotubes. It is demonstrated that the hydrogen atoms located inside multiwall carbon nanotubes have a lower free energy compared to those located outside. We also perform compar…
Recently, the topic of Casimir repulsion has received a great deal of attention, largely because of the possibility of technological application. The general subject has a long history, going back to the self-repulsion of a conducting spherical shell and the repulsion between a perfect electric conductor and a perfect magnetic conductor. Recently it has been observed that repulsion can be achieved between ordinary conducting bodies, provided sufficient anisotropy is present. For example, an anisotropic polarizable atom can be repelled near an aperture in a conducting plate. Here we provide new…
The Casimir force has been computed exactly for only a few simple geometries, such as infinite plates, cylinders, and spheres. We show that a parabolic cylinder, for which analytic solutions to the Helmholtz equation are available, is another case where such a calculation is possible. We compute the interaction energy of a parabolic cylinder and an infinite plate (both perfect mirrors), as a function of their separation and inclination, $H$ and $θ$, and the cylinder's parabolic radius $R$. As $H/R\to 0$, the proximity force approximation becomes exact. The opposite limit of $R/H\to 0$ correspo…
We discuss new approaches to compute numerically the Casimir interaction energy for waveguides of arbitrary section, based on the boundary methods traditionally used to compute eigenvalues of the 2D Helmholtz equation. These methods are combined with the Cauchy's theorem in order to perform the sum over modes. As an illustration, we describe a point-matching technique to compute the vacuum energy for waveguides containing media with different permittivities. We present explicit numerical evaluations for perfect conducting surfaces in the case of concentric corrugated cylinders and a circular c…
In this paper, dedicated to the career of Iver Brevik, we review the derivation of the retarded van der Waals or Casimir-Polder interaction between polarizable molecules from the general multiple scattering formulation of Casimir interactions between bodies. We then apply this van der Waals potential to examine the interaction between tenuous cylindrical bodies, including eccentric cylinders, and revisit the vanishing self-energy of a tenuous dielectric cylinder. In each case, closed-form expressions are obtained.
Scattering theory methods make it possible to calculate the Casimir energy of a perfectly conducting elliptic cylinder opposite a perfectly conducting plane in terms of Mathieu functions. In the limit of zero radius, the elliptic cylinder becomes a finite-width strip, which allows for the study of edge effects. However, existing packages for computing Mathieu functions are insufficient for this calculation, because none can compute Mathieu functions of both the first and second kind for complex arguments. To address this shortcoming, we have written a general purpose Mathieu function package, …
We consider a perfectly conducting infinite cylinder with radius $R$, and investigate the Casimir-Polder (CP) and van der Waals (vdW) interactions with a neutral polarizable particle constrained to move in a plane distant $x_0>R$ from the axis of the cylinder. We show that when the relative curvature $x_0/R \lesssim 6.44$, this particle, under the action of the lateral CP force (which is the projection of the CP force onto the mentioned plane), is attracted to the point on the plane which is closest to the cylinder surface. On the other hand, when $x_0/R \gtrsim 6.44$, we also show that, for c…
We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive force increases dramatically. Beyond this, the force rapidly switches over to attraction as the separation decreases further to zero, in line with the proximity force approximation. We demonstrate that t…
We study the Casimir force in piston-like geometries semiclassically. The force on the piston is finite and physical, but to leading semiclassical approximation depends strongly on the shape of the surrounding cavity. Whereas this force is attractive for pistons in a parallelepiped with flat cylinder head, for which the semiclassical approximation by periodic orbits is exact, this approximation to the force on the piston vanishes for a semi-cylindrical head and becomes repulsive for a cylinder of circular cross section with a hemispherical head. In leading semiclassical approximation the sign …
In this paper, we explore the TGTG formula from the perspective of mode summation approach. Both scalar fields and electromagnetic fields are considered. In this approach, one has to first solve the equation of motion to find a wave basis for each object. The two T's in the TGTG formula are T-matrices representing the Lippmann-Schwinger T-operators, one for each of the objects. The two G's in the TGTG formula are the translation matrices, relating the wave basis of an object to the wave basis of the other object. After discussing the general theory, we apply the prescription to derive the expl…
We give a comprehensive presentation of methods for calculating the Casimir force to arbitrary accuracy, for any number of objects, arbitrary shapes, susceptibility functions, and separations. The technique is applicable to objects immersed in media other than vacuum, nonzero temperatures, and spatial arrangements in which one object is enclosed in another. Our method combines each object's classical electromagnetic scattering amplitude with universal translation matrices, which convert between the bases used to calculate scattering for each object, but are otherwise independent of the details…
Multiple scattering formulations have been employed for more than 30 years as a method of studying the quantum vacuum or Casimir interactions between distinct bodies. Here we review the method in the simple context of $δ$-function potentials, so-called semitransparent bodies. (In the limit of strong coupling, a semitransparent boundary becomes a Dirichlet one.) After applying the method to rederive the Casimir force between two semitransparent plates and the Casimir self-stress on a semitransparent sphere, we obtain expressions for the Casimir energies between disjoint parallel semitransparent…
We have performed numerical simulations to evaluate the effect on the capacitance of finite size boundaries realistically present in the parallel plane, sphere-plane, and cylinder-plane geometries. The potential impact of edge effects in assessing the accuracy of the parameters obtained in the electrostatic calibrations of Casimir force experiments is then discussed.
We study the influence of stationary axisymmetric spacetimes on Casimir energy. We consider a massive scalar field and analyze its dependence on the apparatus orientation with respect to the dragging direction associated with such spaces. We show that, for an apparatus orientation not considered before in the literature, the Casimir energy can change its sign, producing a repulsive force. As applications, we analyze two specific metrics: one associated with a linear motion of a cylinder and a circular equatorial motion around a gravitational source described by Kerr geometry.
We perform the matching required to compute the leading effective boundary contribution to the QED lagrangian in the presence of a conducting surface, once the electron is integrated out. Our result resolves a confusion in the literature concerning the interpretation of the leading such correction to the Casimir energy. It also provides a useful theoretical laboratory for brane-world calculations in which kinetic terms are generated on the brane, since a lot is known about QED near boundaries.
We report an improved precision measurement of the Casimir force. The force is measured between a large Al coated sphere and flat plate using an Atomic Force Microscope. The primary experimental improvements include the use of smoother metal coatings, reduced noise, lower systematic errors and independent measurement of surface separations. Also the complete dielectric spectrum of the metal is used in the theory. The average statistical precision remains at the same 1% of the forces measured at the closest separation.
We study the geometrical corrections to the simple Proximity Force Approximation for the non-retarded Casimir force. We present analytical results for the force between objects of various shapes and substrates, and between pairs of objects. We compare the results to those from more exact numerical calculations. We treat spheres, spheroids, cylinders, cubes, cones, and wings; the analytical PFA results together with the geometrical correction factors are summarized in a table.
We derive a simplified general expression for the two-body scalar Casimir energy in generalized separable coordinate systems. We apply this technique to the case of radial semi-transparent planes in the annular region between two concentric Dirichlet cylinders. This situation is explored both analytically and numerically.
Experimental methods and procedures required for precision measurements of the Casimir force are presented. In particular, the best practices for obtaining stable cantilevers, calibration of the cantilever, correction of thermal and mechanical drift, measuring the contact separation, sphere radius and the roughness are discussed.
We report an improved precision measurement of the Casimir force using metallic gold surfaces. The force is measured between a large gold coated sphere and flat plate using an Atomic Force Microscope. The use of gold surfaces removes some theoretical uncertainties in the interpretation of the measurement. The forces are also measured at smaller surface separations. The complete dielectric spectrum of the metal is used in the comparison of theory to the experiment. The average statistical precision remains at the same 1% of the forces measured at the closest separation. These results should lea…
We present an overview of the validity of the Proximity Force Approximation (PFA) in the calculation of Casimir forces between perfect conductors for different geometries, with particular emphasis for the configuration of a cylinder in front of a plane. In all cases we compare the exact numerical results with those of PFA, and with asymptotic expansions that include the next to leading order corrections. We also discuss the similarities and differences between the results for Casimir and electrostatic forces.
The recent discovery that silicon nitride membranes can be used as extremely high Q mechanical resonators makes possible a number of novel experiments, which include improved long range vacuum Casimir force measurements, and measurments of the properties of liquid helium below the lambda point. It is noted that in the thermal correction to the Casimir force, the phase velocity of the excitations does not enter, with the force per unit area between parallel plates depending only on the temperature and distance between the plates. Thus it appears as possible to measure the phonon analog of the f…
The geometry dependence of Casimir forces is significantly more pronounced in the presence of thermal fluctuations due to a generic geometry-temperature interplay. We show that the thermal force for standard sphere-plate or cylinder-plate geometries develops a non-monotonic behavior already in the simple case of a fluctuating Dirichlet scalar. In particular, the attractive thermal force can increase for increasing distances below a critical temperature. This anomalous behavior is triggered by a reweighting of relevant fluctuations on the scale of the thermal wavelength. The essence of the phen…
We have used an atomic force microscope to make precision measurements of the Casimir force between a metallized sphere of diameter 196 microns and flat plate. The force was measured for plate-sphere separations from 0.1 to 0.9 microns. The experimental results are consistent with present theoretical calculations including the finite conductivity, roughness, and temperature corrections. The root mean square average deviation of 1.6 pN between theory and experiment corresponds to a 1% deviation at the smallest separation.
We compute Casimir interaction energies for the sphere-plate and cylinder-plate configuration induced by scalar-field fluctuations with Dirichlet boundary conditions. Based on a high-precision calculation using worldline numerics, we quantitatively determine the validity bounds of the proximity force approximation (PFA) on which the comparison between all corresponding experiments and theory are based. We observe the quantitative failure of the PFA on the 1% level for a curvature parameter a/R > 0.00755. Even qualitatively, the PFA fails to predict reliably the correct sign of genuine Casimir …
We derive the exact Casimir-Polder potential for a polarizable microparticle inside an ideal metal cylindrical shell using the Green function method. The exact Casimir-Polder potential for a particle outside a shell, obtained recently by using the Hamiltonian approach, is rederived and confirmed. The exact quantum field theoretical result is compared with that obtained using the proximity force approximation and a very good agreement is demonstrated at separations below 0.1$R$, where $R$ is the radius of the cylinder. The developed methods are applicable in the theory of topological defects.
