We compute Casimir interaction energies for the sphere-plate and cylinder-plate configuration induced by scalar-field fluctuations with Dirichlet boundary conditions. Based on a high-precision calculation using worldline numerics, we quantitatively determine the validity bounds of the proximity force approximation (PFA) on which the comparison between all corresponding experiments and theory are based. We observe the quantitative failure of the PFA on the 1% level for a curvature parameter a/R > 0.00755. Even qualitatively, the PFA fails to predict reliably the correct sign of genuine Casimir curvature effects. We conclude that data analysis of future experiments aiming at a precision of 0.1% must no longer be based on the PFA.
We present an overview of the validity of the Proximity Force Approximation (PFA) in the calculation of Casimir forces between perfect conductors for different geometries, with particular emphasis for the configuration of a cylinder in front of a plane. In all cases we compare the exact numerical results with those of PFA, and with asymptotic expansions that include the next to leading order corrections. We also discuss the similarities and differences between the results for Casimir and electrostatic forces.
A widely used method for estimating Casimir interactions [H. B. G. Casimir, Proc. K. Ned. Akad. Wet. 51, 793 (1948)] between gently curved material surfaces at short distances is the proximity force approximation (PFA). While this approximation is asymptotically exact at vanishing separations, quantifying corrections to PFA has been notoriously difficult. Here we use a derivative expansion to compute the leading curvature correction to PFA for metals (gold) and insulators (SiO$_2$) at room temperature. We derive an explicit expression for the amplitude $\hatθ_1$ of the PFA correction to the fo…
The widely-adopted proximity-force approximation (PFA) to estimate normal Casimir forces is known to be asymptotically exact at vanishing separations. In this letter, we propose a correction to the PFA, which is sufficiently accurate in predicting displacement-induced lateral Casimir forces between a sphere and a grating, for separation-to-radius ratio up to 0.5, far beyond the limit within which the application of PFA is previously restricted. Our result allows convenient estimation of Casimir interactions and thus shall be useful in relevant experimental and engineering Casimir applications.…
A recent experiment [J.L. Garrett et al., Phys. Rev. Lett {\bf 120}, 040401 (2018)] measured for the first time the gradient of the Casimir force between two gold spheres at room temperature. The theoretical analysis of the data was carried out using the standard Proximity Force Approximation (PFA). A fit of the data, using a parametrization of the force valid for the sphere-plate geometry, was used by the authors to place a bound on deviations from PFA. Motivated by this work, we compute the Casimir force between two gold spheres at finite temperature. The semi-analytic formula for the Casimi…
The proximity force approximation (PFA) relates the interaction between closely spaced, smoothly curved objects to the force between parallel plates. Precision experiments on Casimir forces necessitate, and spur research on, corrections to the PFA. We use a derivative expansion for gently curved surfaces to derive the leading curvature modifications to the PFA. Our methods apply to any homogeneous and isotropic materials; here we present results for Dirichlet and Neumann boundary conditions and for perfect conductors. A Padé extrapolation constrained by a multipole expansion at large distance …
The proximity force approximation (PFA) has been widely used as a tool to evaluate the Casimir force between smooth objects at small distances. In spite of being intuitively easy to grasp, it is generally believed to be an uncontrolled approximation. Indeed, its validity has only been tested in particular examples, by confronting its predictions with the next to leading order (NTLO) correction extracted from numerical or analytical solutions obtained without using the PFA. In this article we show that the PFA and its NTLO correction may be derived within a single framework, as the first two te…
We present improved worldline numerical algorithms for high-precision calculations of Casimir interaction energies induced by scalar-field fluctuations with Dirichlet boundary conditions for various Casimir geometries. Significant reduction of numerical cost is gained by exploiting the symmetries of the worldline ensemble in combination with those of the configurations. This facilitates high-precision calculations on standard PCs or small clusters. We illustrate our strategies using the experimentally most relevant sphere-plate and cylinder-plate configuration. We compute Casimir curvature eff…
In this paper aiming to obtain the Casimir energy between a sinusoidally corrugated sphere and a plate, we first present a derivation of the sphere-plate Casimir force obtained by applying proximity force approximation (PFA). One may investigate this problem by using the scattering matrix method. Despite that this method achieves the exact result, but difficulties of applying this formalism make the procedure complicated. We use the PFA to achieve the purpose in a truly explicit manner. Considering the sphere to have different kinds of sinusoidally corrugations, we obtain the effect of deforma…
Building on work of Meixner [J. Meixner, Z. Naturforschung 3a, 506 (1948)], we show how to compute the exact scattering amplitude (or $T$-matrix) for electromagnetic scattering from a perfectly conducting disk. This calculation is a rare example of a non-diagonal $T$-matrix that can nonetheless be obtained in a semi-analytic form. We then use this result to compute the electromagnetic Casimir interaction energy for a disk opposite a plane, for arbitrary orientation angle of the disk, for separations greater than the disk radius. We find that the proximity force approximation (PFA) significantl…
Quantum fluctuations of the electromagnetic field in the medium surrounding two discharged macroscopic polarizable bodies induce a force between the two bodies, the so called Casimir force. In the last two decades many experiments have accurately measured this force, and significant efforts are made to harness it in the actuation of micro and nano machines. The inherent many body character of the Casimir force makes its computation very difficult in non-planar geometries, like the standard experimental sphere-plate configuration. Here we derive an approximate semi-analytic formula for the sphe…
We calculate the Casimir force and its gradient between a spherical and a planar gold surface. Significant numerical improvements allow us to extend the range of accessible parameters into the experimental regime. We compare our numerically exact results with those obtained within the proximity force approximation (PFA) employed in the analysis of all Casimir force experiments reported in the literature so far. Special attention is paid to the difference between the Drude model and the dissipationless plasma model at zero frequency. It is found that the correction to PFA is too small to explai…
We analyze the possibility to measure small thermal effects in the Casimir force between metal test bodies in configurations of a sphere above a plate and two parallel plates. For sphere-plate geometry used in many experiments we investigate the applicability of the proximity force approximation (PFA) to calculate thermal effects in the Casimir force and its gradient. It is shown that for real metals the two formulations of the PFA used in the literature lead to relative differences in the obtained results being less than a small parameter equal to the ratio of separation distance to sphere ra…
We derive an exact solution for the Casimir force between two arbitrary periodic dielectric gratings and illustrate our method by applying it to two nanostructured silicon gratings. We also reproduce the Casimir force gradient measured recently [1] between a silicon grating and a gold sphere taking into account the material dependence of the force. We find good agreement between our theoretical results and the measured values both in absolute force values and the ratios between the exact force and PFA predictions.
We propose a new Monte-Carlo method for calculation of the Casimir forces. Our method is based on the formalism of noncompact lattice quantum electrodynamics. This approach has been tested in the simplest case of two ideal conducting planes. After this the method has been applied to the calculation of the lateral Casimir forces between two ideal conducting rectangular gratings. We compare our calculations with the results of PFA and "Optimal" PFA methods.
Exploiting conformal symmetry, we derive a simple exact formula for the classical electromagnetic Casimir interaction of two perfectly conducting three-spheres, including the sphere-plate geometry as a special case, in four euclidean dimensions. We verify that the short distance expansion of the Casimir energy agrees to leading order with the Proximity Force Approximation (PFA), while the next-to-leading-order is in agreement with a recently proposed derivative expansion of the Casimir energy. At the next-to-next-to-leading order we find a non-analytic correction to PFA, which for a sphere-pla…
We measure the Casimir force between a gold sphere and a silicon plate with nanoscale, rectangular corrugations with depth comparable to the separation between the surfaces. In the proximity force approximation (PFA), both the top and bottom surfaces of the corrugations contribute to the force, leading to a distance dependence that is distinct from a flat surface. The measured Casimir force is found to deviate from the PFA by up to 15%, in good agreement with calculations based on scattering theory that includes both geometry effects and the optical properties of the material.
We discuss the constraints on the parameters of a Yukawa interaction obtained from the indirect measurements of the Casimir pressure between parallel plates using the sphere-plate configuration. Recently, it was claimed in the literature that the application of the proximity force approximation (PFA) to the calculation of a Yukawa interaction in the sphere-plate configuration could lead to a large error of order 100\% in the constraints obtained. Here we re-calculate the constraints both exactly and using the PFA, and arrive at identical results. We elucidate the reasons why an incorrect concl…
The electromagnetic Casimir interaction between two spheres is studied within the scattering approach using the plane-wave basis. It is demonstrated that the proximity force approximation (PFA) corresponds to the specular-reflection limit of Mie scattering. Using the leading-order semiclassical WKB approximation for the direct reflection term in the Debye expansion for the scattering amplitudes, we prove that PFA provides the correct leading-order divergence for arbitrary materials and temperatures in the sphere-sphere and the plane-sphere geometry. Our derivation implies that only a small sec…
We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most…
In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well-characterized by the Proximity Force Approximation (PFA), we find that in the present case the microstructure modulates the force in a way qualitatively inconsistent with PFA. We find instead that effective-me…
We analyze recent experiments on measuring the thermal Casimir force with account of possible background effects. Special attention is paid to the validity of the proximity force approximation (PFA) used in the comparison between the experimental data and computational results in experiments employing a sphere-plate geometry. The PFA results are compared with the exact results where they are available. The possibility to use fitting procedures in theory-experiment comparison is discussed. On this basis we reconsider experiments exploiting spherical lenses of centimeter-size radii.
We review the relation between Casimir effect and geometry, emphasizing deviations from the commonly used Proximity Force Approximation (PFA). We use to this aim the scattering formalism which is nowadays the best tool available for accurate and reliable theory-experiment comparisons. We first recall the main lines of this formalism when the mirrors can be considered to obey specular reflection. We then discuss the more general case where non planar mirrors give rise to non-specular reflection with wavevectors and field polarisations mixed. The general formalism has already been fruitfully use…
We use a derivative expansion for gently curved surfaces to compute the leading and the next-to-leading curvature corrections to the Casimir-Polder interaction between a polarizable small particle and a non-planar surface. While our methods apply to any homogeneous and isotropic surface, explicit results are presented here for perfect conductors. We show that the derivative expansion of the Casimir-Polder potential follows from a resummation of its perturbative series, for small in-plane momenta. We consider the retarded, non-retarded and classical high temperature limits.
We derive the explicit expression for the Casimir energy between a sphere and a 1D grating, in terms of the sphere and grating reflection matrices, and valid for arbitrary materials, sphere radius, and grating geometric parameters. We then numerically calculate the Casimir energy between a metallic (gold) sphere and a dielectric (fused silica) lamellar grating at room temperature, and explore its dependence on the sphere radius, grating-sphere separation, and lateral displacement. We quantitatively investigate the geometrical dependence of the interaction, which is sensitive to the grating hei…
We derive the leading-order correction to the proximity force approximation (PFA) result for the electromagnetic Casimir interaction in the plane-sphere geometry by developing the scattering approach in the plane-wave basis. Expressing the Casimir energy as a sum over round trips between plane and sphere, we find two distinct contributions to the correction. The first one results from the variation of the Mie reflection operator, calculated within the geometric optical WKB approximation, over the narrow Fourier interval associated to specular reflection at the vicinity of the point of closest …
We argue that the appropriate variable to study a non trivial geometry dependence of the Casimir force is the lateral component of the Casimir force, which we evaluate between two corrugated metallic plates outside the validity of the Proximity Force Approximation (PFA). The metallic plates are described by the plasma model, with arbitrary values for the plasma wavelength, the plate separation and the corrugation period, the corrugation amplitude remaining the smallest length scale. Our analysis shows that in realistic experimental situations the Proximity Force Approximation overestimates the…
A boundary undergoing relativistic motion can create particles from quantum vacuum fluctuations in a phenomenon known as the dynamical Casimir effect. We examine the creation of particles, and more generally the transformation of quantum field states, due to boundary motion in curved spacetime. We provide a novel method enabling the calculation of the effect for a wide range of trajectories and spacetimes. We apply this to the experimental scenario used to detect the dynamical Casimir effect, now adopting the Schwarzschild metric, and find novel resonances in particle creation as a result of t…
The Casimir--Polder interaction between an anisotropic particle and a surface is orientation dependent. We study novel orientational effects that arise due to curvature of the surface for distances much smaller than the radii of curvature by employing a derivative expansion. For nanoparticles we derive a general short distance expansion of the interaction potential in terms of their dipolar polarizabilities. Explicit results are presented for nano-spheroids made of SiO$_2$ and gold, both at zero and at finite temperatures. The preferred orientation of the particle is strongly dependent on curv…
We characterize the Casimir forces for the Dirac vacuum on free-fermionic chains with smoothly varying hopping amplitudes, which correspond to (1+1)D curved spacetimes with a static metric in the continuum limit. The first-order energy potential for an obstacle on that lattice corresponds to the Newtonian potential associated to the metric, while the finite-size corrections are described by a curved extension of the conformal field theory predictions, including a suitable boundary term. We show that, for weak deformations of the Minkowski metric, Casimir forces measured by a local observer at …
We study the geometrical corrections to the simple Proximity Force Approximation for the non-retarded Casimir force. We present analytical results for the force between objects of various shapes and substrates, and between pairs of objects. We compare the results to those from more exact numerical calculations. We treat spheres, spheroids, cylinders, cubes, cones, and wings; the analytical PFA results together with the geometrical correction factors are summarized in a table.
The Casimir force between two objects is notoriously difficult to calculate in anything other than parallel-plate geometries due to its non-additive nature. This means that for more complicated, realistic geometries one usually has to resort to approaches such as making the crude proximity force approximation (PFA). Another issue with calculation of Casimir forces in real-world situations (such as with realistic materials) is that there are continuing doubts about the status of the standard Lifshitz treatment as a true quantum theory. Here we demonstrate an alternative approach to calculation …
We give an exact series expansion of the Casimir force between plane and spherical metallic surfaces in the non trivial situation where the sphere radius $R$, the plane-sphere distance $L$ and the plasma wavelength $λ_¶$ have arbitrary relative values. We then present numerical evaluation of this expansion for not too small values of $L/R$. For metallic nanospheres where $R, L$ and $λ_¶$ have comparable values, we interpret our results in terms of a correlation between the effects of geometry beyond the proximity force approximation (PFA) and of finite reflectivity due to material properties. …
The lateral Casimir force between two corrugated metallic plates makes possible a study of the nontrivial interplay of geometry and Casimir effect appearing beyond the regime of validity of the Proximity Force Approximation (PFA). Quantitative evaluations can be obtained by using scattering theory in a perturbative expansion valid when the corrugation amplitudes are smaller than the three other length scales: the mean separation distance $L$ of the plates, the corrugation period $λ_\C$ and the plasma wavelength $λ_¶$. Within this perturbative expansion, evaluations are obtained for arbitrary r…
We investigate the electromagnetic Casimir interactions of an object contained within an otherwise empty, perfectly conducting spherical shell. For a small object we present analytical calculations of the force, which is directed away from the center of the cavity, and the torque, which tends to align the object opposite to the preferred alignment outside the cavity. For a perfectly conducting sphere as the interior object, we compute the corrections to the proximity force approximation (PFA) numerically. In both cases the results for the interior configuration match smoothly onto those for th…
Multiple scattering formulations have been employed for more than 30 years as a method of studying the quantum vacuum or Casimir interactions between distinct bodies. Here we review the method in the simple context of $δ$-function potentials, so-called semitransparent bodies. (In the limit of strong coupling, a semitransparent boundary becomes a Dirichlet one.) After applying the method to rederive the Casimir force between two semitransparent plates and the Casimir self-stress on a semitransparent sphere, we obtain expressions for the Casimir energies between disjoint parallel semitransparent…
New exact results are given for the interior Casimir energies of infinitely long waveguides of triangular cross section (equilateral, hemiequilateral, and isosceles right triangles). Results for cylinders of rectangular cross section are rederived. In particular, results are obtained for interior modes belonging to Dirichlet and Neumann boundary conditions (TM and TE modes). These results are expressed in rapidly convergent series using the Chowla-Selberg formula, and in fact may be given in closed form, except for general rectangles. The energies are finite because only the first three heat-k…
Casimir forces are a manifestation of the change in the zero-point energy of the vacuum caused by the insertion of boundaries. We show how the Casimir force can be computed by consideration of the vacuum fluctuations that are suppressed by the boundaries, and rederive the scalar Casimir effects for a series of geometries. For the planar case a finite universal force is automatically found. For curved geometries formally divergent expressions are encountered which we argue are largely due to the divergent self-energy of the boundary contributing to the force. This idea is supported by computing…
Casimir forces are a manifestation of the change in the zero-point energy of the vacuum caused by the insertion of boundaries. We show how the Casimir force can be efficiently computed by consideration of the vacuum fluctuations that are suppressed by the boundaries, and rederive the scalar Casimir effects for a series of the Dirichlet geometries. For the planar case a finite universal force is automatically found. Consistent with other calculations of the effect, for curved geometries divergent (non-universal) expressions are encountered. They are interpreted geometrically following Candelas …
We present calculations of the Casimir interaction between a sphere and a plane, using a multipolar expansion of the scattering formula. This configuration enables us to study the nontrivial dependence of the Casimir force on the geometry, and its correlations with the effects of imperfect reflection and temperature. The accuracy of the Proximity Force Approximation (PFA) is assessed, and is shown to be affected by imperfect reflexion. Our analytical and numerical results at ambient temperature show a rich variety of interplays between the effects of curvature, temperature, finite conductivity…
We study a quantum model of dynamical Casimir effect in an optical cavity enclosed by a freely moving mirror attached to a harmonic spring. The quantum fluctuations of the friction force exerted by the dynamical Casimir emission onto the moving mirror are investigated, as well as their consequences on the quantum state of the mirror oscillation. Observable signatures of the interplay of the nonlinear nature of the effective mirror-cavity coupling and of the discreteness of the emitted photons are pointed out, in particular as a fast diffusion of the mirror oscillation phase. These results are …
We investigate Casimir effect as well as thermal Casimir effect for a pair of parallel perfectly plates placed in general stationary space-time background. It is found that the Casimir energy is influenced by the 00-component of metric and the corresponding quantity in dragging frame. We give a scheme to renormalize thermal correction to free energy in curved space-time. It is shown that the thermal corrections to Casimir thermodynamic quantities not only depend on the proper temperature and proper geometrical parameters of the plates, but also on the determinant of space-time metric.
We calculate the Casimir interaction energy in $d=2$ spatial dimensions between two (zero-width) mirrors, one flat, and the other slightly curved, upon which {\em imperfect\/} conductor boundary conditions are imposed for an Electromagnetic (EM) field. Our main result is a second-order Derivative Expansion (DE) approximation for the Casimir energy, which is studied in different interesting limits. In particular, we focus on the emergence of a non-analyticity beyond the leading-order term in the DE, when approaching the limit of perfectly-conducting mirrors. We also show that the system conside…
In this paper, dedicated to the career of Tom Erber, we consider the Casimir interaction between weakly coupled bodies at nonzero temperature. For the case of semitransparent bodies, that is, ones described by delta-function potentials, we first examine the interaction between an infinite plane and an arbitrary curved surface. In weak coupling, such an interaction energy coincides with the exact form of the proximity force approximation obtained by summing the interaction between opposite surface elements at arbitrary temperature. This result generalizes a theorem proved recently by Decca et a…
In the current work we present the complete results for the measurement of normal Casimir force between shallow and smooth sinusoidally corrugated gold coated sphere and a plate at various angles between the corrugations using an atomic force microscope. All measured data were compared with the theoretical approach using the proximity force approximation and theory based on derivative expansion. In both cases real material properties of the surfaces and non-zero temperature were taken into account. Special attention is paid to the description of electrostatic interactions between corrugated su…
We discuss Stueckelberg massive electromagnetism on an arbitrary four-dimensional curved spacetime (gauge invariance of the classical theory and covariant quantization, wave equations for the massive spin-1 field $A_μ$, for the auxiliary Stueckelberg scalar field $Φ$ and for the ghost fields $C$ and $C^\ast$, Ward identities, Hadamard representation of the various Feynman propagators and covariant Taylor series expansions of the corresponding coefficients). This permits us to construct, for a Hadamard quantum state, the expectation value of the renormalized stress-energy tensor associated with…
We investigate the thermal Casimir effect of a massless scalar field for two parallel plates moving in the equatorial orbit in Kerr space-time. Under the assumption that the typical cavity size is much smaller than the orbital radius, proposed by Sorge, we deduce the analytical expression of the renormalized free energy in this curved space-time. We also get the analytical representation for the renormalized internal energy, and find that there is a thermal correction to the Casimir energy, which depends on the proper temperature and the proper geometrical parameters of the plates. The asympto…
Several problems at the interface between the field-theoretical description of the Casimir effect and experiments on measuring the Casimir force are discussed. One of these problems is connected with the definition of the Casimir free energy in ideal metal rectangular boxes satisfying the general physical requirements. It is shown that the consideration of rectangular boxes with a partition (piston) does not negate the previously known results obtained for boxes without a piston. Both sets of results are found to be in mutual agreement. Another problem is related to the use of the proximity fo…
The Casimir effect, reflecting quantum vacuum fluctuations in the electromagnetic field in a region with material boundaries, has been studied both theoretically and experimentally since 1948. The forces between dielectric and metallic surfaces both plane and curved have been measured at the 10 to 1 percent level in a variety of room-temperature experiments, and remarkable agreement with the zero-temperature theory has been achieved. In fitting the data various corrections due to surface roughness, patch potentials, curvature, and temperature have been incorporated. It is the latter that is th…
It is well known that boundary conditions on quantum fields produce divergences in the renormalized energy-momentum tensor near the boundaries. Although irrelevant for the computation of Casimir forces between different bodies, the self-energy couples to gravity, and the divergences may, in principle, generate large gravitational effects. We present an analysis of the problem in the context of quantum field theory in curved spaces. Our model consists of a quantum scalar field coupled to a classical field that, in a certain limit, imposes Dirichlet boundary conditions on the quantum field. We s…
Quantum vacuum energy has been known to have observable consequences since 1948 when Casimir calculated the force of attraction between parallel uncharged plates, a phenomenon confirmed experimentally with ever increasing precision. Casimir himself suggested that a similar attractive self-stress existed for a conducting spherical shell, but Boyer obtained a repulsive stress. Other geometries and higher dimensions have been considered over the years. Local effects, and divergences associated with surfaces and edges have been investigated by several authors. Quite recently, Graham et al. have re…
\emph{Resonance Casimir-Polder interaction(RCPI)} occurs in nature when one or more atoms are in their excited states and the exchange of real photon is involved between them due to vacuum fluctuations of the quantum fields. In recent times, many attempts have been made to show that the curved spacetime such as the \emph{de-Sitter spacetime} can be separated from a \emph{thermal Minkowski spacetime} using \emph{RCPI}. Motivated from these ideas, here we study the \emph{RCPI} between two atoms that interact with a massive scalar field in Schwarzschild spacetime provided the atoms are placed in …
We apply the derivative expansion approach to the Casimir effect for a real scalar field in $d$ spatial dimensions, to calculate the next to leading order term in that expansion, namely, the first correction to the proximity force approximation. The field satisfies either Dirichlet or Neumann boundary conditions on two static mirrors, one of them flat and the other gently curved. We show that, for Dirichlet boundary conditions, the next to leading order term in the Casimir energy is of quadratic order in derivatives, regardless of the number of dimensions. Therefore it is local, and determined…
Using the ray-optics approximation, we analyze the Casimir force in a two dimensional domain formed by two metallic blocks adjacent to parallel metallic sidewalls, which are separated from the blocks by a finite distance h. For h > 0, the ray-optics approach is not exact because diffraction effects are neglected. Nevertheless, we show that ray optics is able to qualitatively reproduce a surprising effect recently identified in an exact numerical calculation: the force between the blocks varies non-monotonically with h. In this sense, the ray-optics approach captures an essential part of the ph…
When the vacuum is partitioned by material boundaries with arbitrary shape, one can define the zero-point energy and the free energy of the electromagnetic waves in it: this can be done, independently of the nature of the boundaries, in the limit that they become perfect conductors, provided their curvature is finite. The first examples we consider are Casimir's original configuration of parallel plates, and the experimental situation of a sphere in front of a plate. For arbitrary geometries, we give an explicit expression for the zero-point energy and the free energy in terms of an integral k…
We consider a perfectly conducting infinite cylinder with radius $R$, and investigate the Casimir-Polder (CP) and van der Waals (vdW) interactions with a neutral polarizable particle constrained to move in a plane distant $x_0>R$ from the axis of the cylinder. We show that when the relative curvature $x_0/R \lesssim 6.44$, this particle, under the action of the lateral CP force (which is the projection of the CP force onto the mentioned plane), is attracted to the point on the plane which is closest to the cylinder surface. On the other hand, when $x_0/R \gtrsim 6.44$, we also show that, for c…
We study the interaction energy between two surfaces, one of them flat, the other describable as the composition of a small-amplitude corrugation and a slightly curved, smooth surface. The corrugation, represented by a spatially random variable, involves Fourier wavelengths shorter than the (local) curvature radii of the smooth component of the surface. After averaging the interaction energy over the corrugation distribution, we obtain an expression which only depends on the smooth component. We then approximate that functional by means of a derivative expansion, calculating explicitly the lea…
