We give an exact series expansion of the Casimir force between plane and spherical metallic surfaces in the non trivial situation where the sphere radius $R$, the plane-sphere distance $L$ and the plasma wavelength $λ_¶$ have arbitrary relative values. We then present numerical evaluation of this expansion for not too small values of $L/R$. For metallic nanospheres where $R, L$ and $λ_¶$ have comparable values, we interpret our results in terms of a correlation between the effects of geometry beyond the proximity force approximation (PFA) and of finite reflectivity due to material properties. We also discuss the interest of our results for the current Casimir experiments performed with spheres of large radius $R\gg L$.
The Casimir effect for spherical geometry is calculated using generalized Thermofield Dynamics for the case of scalar field. Casimir force and Casimir pressure are presented. It is found that for high temperatures the Casimir force does change sign.
The leading semiclassical estimates of the electromagnetic Casimir stresses on a spherical and a cylindrical metallic shell are within 1% of the field theoretical values. The electromagnetic Casimir energy for both geometries is given by two decoupled massless scalars that satisfy conformally covariant boundary conditions. Surface contributions vanish for smooth metallic boundaries and the finite electromagnetic Casimir energy in leading semiclassical approximation is due to quadratic fluctuations about periodic rays in the interior of the cavity only. Semiclassically the non-vanishing Casimir…
We compute the Casimir Energy of a spherical region using a Surface Impedance approach. We characterize the Surface Impedance of the boundary using plasma model. Exact analytical formulae are obtained by means of the zeta function regularization method and all the divergencies are explicitly computed. We find that it is possible to have negative Casimir energy for some range of values of the relevant parameter. Limits of applicability of the model are discussed.
The Casimir interaction energy due to the vacuum fluctuations of a massive vector field between two perfectly conducting concentric spherical bodies is computed. The TE contribution to the Casimir interaction energy is a direct generalization of the massless case but the TM contribution is much more complicated. Each TM mode is a linear combination of a transverse mode which is the generalization of a TM mode in the massless case and a longitudinal mode that does not appear in the massless case. In contrast to the case of two parallel perfectly conducting plates, the are no TM discrete modes t…
Based on calculations involving an idealized boundary condition, it has long been assumed that the stress on a spherical conducting shell is repulsive. We use the more realistic case of a Drude dielectric to show that the stress is attractive, matching the generic behavior of Casimir forces in electromagnetism. We trace the discrepancy between these two cases to interactions between the electromagnetic quantum fluctuations and the dielectric material.
The Casimir energy for a conducting spherical shell of radius $a$ is computed using a direct mode summation approach. An essential ingredient is the implementation of a recently proposed method based on Cauchy's theorem for an evaluation of the eigenfrequencies of the system. It is shown, however, that this earlier calculation uses an improper set of modes to describe the waves exterior to the sphere. Upon making the necessary corrections and taking care to ensure that no mathematically ill-defined expressions occur, the technique is shown to leave numerical results unaltered while avoiding a …
Calculations of the Casimir energy for spherical geometries which are based on integrations of the stress tensor are critically examined. It is shown that despite their apparent agreement with numerical results obtained from mode summation methods, they contain a number of serious errors. Specifically, these include (1) an improper application of the stress tensor to spherical boundaries, (2) the neglect of pole terms in contour integrations, and (3) the imposition of inappropriate boundary conditions upon the relevant propagators. A calculation which is based on the stress tensor and which av…
It is shown that recent criticism by C. R. Hagen (hep-th/9902057) questioning the validity of stress tensor treatments of the Casimir energy for space divided into two parts by a spherical boundary is without foundation.
In this paper we continue our program of computing Casimir self-entropies of idealized electrical bodies. Here we consider an electromagnetic $δ$-function sphere ("semitransparent sphere") whose electric susceptibility has a transverse polarization with arbitrary strength. Dispersion is incorporated by a plasma-like model. In the strong coupling limit, a perfectly conducting spherical shell is realized. We compute the entropy for both low and high temperatures. The TE self-entropy is negative as expected, but the TM self-entropy requires ultraviolet and infrared subtractions, and, surprisingly…
In the final few years of his life, Julian Schwinger proposed that the ``dynamical Casimir effect'' might provide the driving force behind the puzzling phenomenon of sonoluminescence. Motivated by that exciting suggestion, I have computed the static Casimir energy of a spherical cavity in an otherwise uniform material with dielectric constant $ε$ and permeability $μ$. As expected the result is divergent; yet a plausible finite answer is extracted, in the leading uniform asymptotic approximation. That result gives far too small an energy to account for the large burst of photons seen in sonolum…
We calculated the force of the quantum vacuum, the Casimir force, in a spherically symmetric medium, Maxwell's fish eye, surrounded by a perfect mirror and derived an exact analytic solution. Our solution questions the idea that the Casimir force of a spherical mirror is repulsive - we found an attractive force that diverges at the mirror.
In Phys. Rev. {\bf E 70}, 047102 (2004), J.R. Torgerson and S.K. Lamoreaux investigated for the first time the real-frequency spectrum of finite temperature correction to the Casimir force, for metallic plates of finite conductivity. The very interesting result of this study is that the correction from the TE mode is dominated by low frequencies, for which the dielectric description of the metal is invalid. However, their analysis of the problem, based on more appropriate low-frequency metallic boundary conditions, uses an incorrect form of boundary conditions for TE modes. We repeat their ana…
We have performed comparative measurements of the Casimir force between a metallic plate and a transparent sphere coated with metallic films of different thicknesses. We have observed that, if the thickness of the coating is less than the skin-depth of the electromagnetic modes that mostly contribute to the interaction, the force is significantly smaller than that measured with a thick bulk-like film. Our results provide the first direct evidence of the skin-depth effect on the Casimir force between metallic surfaces.
We reply to the "Comment on 'The Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic mirrors'" [arXiv:1604.06432]. We believe the comment misrepresents our papers, and fails to provide a plausible resolution to the conflict between theory and experiment.
We consider the interaction between a spherical plasma sheet and a planar plasma sheet due to the vacuum fluctuations of electromagnetic fields. We use the mode summation approach to derive the Casimir interaction energy and study its asymptotic behaviors. In the small separation regime, we confirm the proximity force approximation and calculate the first correction beyond the proximity force approximation. This study has potential application to model Casimir interaction between objects made of materials that can be modeled by plasma sheets such as graphene sheets.
A piston is introduced into a spherical lune Casimir cavity turning it into two adjacent lunes separated by the (hemispherical) piston. On the basis of zeta function regularisation, the vacuum energy of the arrangement is finite for conformal propagation in space-time. For even spheres this energy is independent of the angle of the lune. For odd dimensions it is shown that for all Neumann, or all Dirichlet, boundary conditions the piston is attracted or repelled by the nearest wall if d=3,7,... or if d=1,5,..., respectively. For hybrid N-D conditions these requirements are switched. If a mass …
We derive an analytic behavior of the Casimir free energy, entropy and pressure of metallic films in vacuum at low temperature. It is shown that this behavior differs significantly depending on whether the plasma or the Drude model is used to describe the dielectric properties of film metal. For metallic films described by the lossless plasma model the thermal corrections to the Casimir energy and pressure drop to zero exponentially fast with increasing film thickness. There is no classical limit in this case. The Casimir entropy satisfies the Nernst heat theorem. For metallic films with perfe…
The Casimir effect is investigated in cylindrical and toroidal carbon nanotubes within the framework of the Dirac-like model for the electronic states. The topological Casimir energy is positive for metallic cylindrical nanotubes and is negative for semiconducting ones. The toroidal compactification of a cylindrical nanotube along its axis increases the Casimir energy for metallic-type (periodic) boundary conditions along its axis and decreases the Casimir energy for the semiconducting-type compactifications. For finite length metallic nanotubes the Casimir forces acting on the tube edges are …
In the final few years of his life, Julian Schwinger proposed that the ``dynamical Casimir effect'' might provide the driving force behind the puzzling phenomenon of sonoluminescence. Motivated by that exciting suggestion, we have computed the static Casimir energy of a spherical cavity in an otherwise uniform material. As expected the result is divergent; yet a plausible finite answer is extracted, in the leading uniform asymptotic approximation. This result agrees with that found using zeta-function regularization. Numerically, we find far too small an energy to account for the large burst o…
The Casimir force between two metallic plates is affected by their roughness state. This effect is usually calculated through the so-called `proximity force approximation' which is only valid for small enough wavevectors in the spectrum of the roughness profile. We introduce here a more general description with a wavevector-dependent roughness sensitivity of the Casimir effect. Since the proximity force approximation underestimates the effect, a measurement of the roughness spectrum is needed to achieve the desired level of accuracy in the theory-experiment comparison.
It has been recognized for some time that even for perfect conductors, the interaction Casimir entropy, due to quantum/thermal fluctuations, can be negative. This result was not considered problematic because it was thought that the self-entropies of the bodies would cancel this negative interaction entropy, yielding a total entropy that was positive. In fact, this cancellation seems not to occur. The positive self-entropy of a perfectly conducting sphere does indeed just cancel the negative interaction entropy of a system consisting of a perfectly conducting sphere and plate, but a model with…
The local Casimir energy density for a massless scalar field associated with step-function potentials in a 3+1 dimensional spherical geometry is considered. The potential is chosen to be zero except in a shell of thickness $δ$, where it has height $h$, with the constraint $hδ=1$. In the limit of zero thickness, an ideal $δ$-function shell is recovered. The behavior of the energy density as the surface of the shell is approached is studied in both the strong and weak coupling regimes. The former case corresponds to the well-known Dirichlet shell limit. New results, which shed light on the natur…
The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for sub-micron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated in the case of ohmic conductors, because optical data do not usually extend to sufficiently low frequencies to permit an accurate evaluation of the standard Kramers-Kronig integral used to compute $ε…
We calculate the Casimir force and free energy for plane metallic mirrors at non-zero temperature. Numerical evaluations are given with temperature and conductivity effects treated simultaneously. The results are compared with the approximation where both effects are treated independently and the corrections simply multiplied. The deviation between the exact and approximated results takes the form of a temperature dependent function for which an analytical expression is given. The knowledge of this function allows simple and accurate estimations at the % level.
We argue that the appropriate variable to study a non trivial geometry dependence of the Casimir force is the lateral component of the Casimir force, which we evaluate between two corrugated metallic plates outside the validity of the Proximity Force Approximation (PFA). The metallic plates are described by the plasma model, with arbitrary values for the plasma wavelength, the plate separation and the corrugation period, the corrugation amplitude remaining the smallest length scale. Our analysis shows that in realistic experimental situations the Proximity Force Approximation overestimates the…
We examine the conditions of validity for the Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic plane mirrors. As in the previously studied case of non-magnetic materials (Guerout et al, Phys. Rev. E 90 042125), we recover the usual expression for the lossy model of optical response, but not for the lossless plasma model. We also show that the modes associated with the Foucault currents play a crucial role in the limit of vanishing losses, in contrast to expectations.
We carefully re-examine the conditions of validity for the consistent derivation of the Lifshitz-Matsubara sum formula for the Casimir pressure between metallic plane mirrors. We recover the usual expression for the lossy Drude model, but not for the lossless plasma model. We give an interpretation of this new result in terms of the modes associated with the Foucault currents which play a role in the limit of vanishing losses, in contrast to common expectations.
The Casimir free energy for a system of two dielectric concentric nonmagnetic spherical bodies is calculated with use of a quantum statistical mechanical method, at arbitrary temperature. By means of this rather novel method, which turns out to be quite powerful (we have shown this to be true in other situations also), we consider first an explicit evaluation of the free energy for the static case, corresponding to zero Matsubara frequency ($n=0$). Thereafter, the time-dependent case is examined. For comparison we consider the calculation of the free energy with use of the more commonly known …
We consider two parallel corrugated plates and show that a Casimir torque arises when the corrugation directions are not aligned. We follow the scattering approach and calculate the Casimir energy up to second order in the corrugation amplitudes, taking into account nonspecular reflections, polarization mixing and the finite conductivity of the metals. We compare our results with the proximity force approximation, which overestimates the torque by a factor 2 when taking the conditions that optimize the effect. We argue that the Casimir torque could be measured for separation distances as large…
Casimir-Polder potential is investigated for a polarizable microparticle in the geometry of a straight cosmic string with a metallic cylindrical shell. The electromagnetic field Green tensor is evaluated on the imaginary frequency axis. The expressions for the Casimir-Polder potential is derived in the general case of anisotropic polarizability for the both interior and exterior regions of the shell. The potential is decomposed into pure string and shell-induced parts. The latter dominates for points near the shell, whereas the pure string part is dominant near the string and at large distance…
The frequency spectrum of the finite temperature correction to the Casimir force can be determined by the use of the Lifshitz formalism for metallic plates of finite conductivity. We show that the correction for the TE electromagnetic modes is dominated by frequencies so low that the plates cannot be modelled as ideal dielectrics. We also address the issues relating to the behavior of electromagnetic fields at the surfaces an within metallic conductors, and claculate the surface modes using appropriate low-frequency metallic boundary conditions. Our result brings the tehrmal correction into ag…
The frequency spectrum of the finite temperature correction to the Casimir force can be determined by use of the Lifshitz formalism for metallic plates of finite conductivity. We show that the correction for the $TE$ electromagnetic modes is dominated by frequencies so low that the plates cannot be modelled as ideal dielectrics. We also address issues relating to the behavior of electromagnetic fields at the surfaces and within metallic conductors, and calculate the surface modes using appropriate low-frequency metallic boundary conditions. Our result brings the thermal correction into agreeme…
For the first time, we have studied the impact of magnetic polarizability of a neutral metallic particle on the dynamical Casimir-Polder force, when the particle is uniformly moving with relativistic velocity parallel to the surface of an ideally conducting plate. The material properties of particle are taken into account within the Drude model approach.
We study the influence of finite conductivity of metals on the Casimir effect. We put the emphasis on explicit theoretical evaluations which can help comparing experimental results with theory. The reduction of the Casimir force is evaluated for plane metallic plates. The reduction of the Casimir energy in the same configuration is also calculated. It can be used to infer the reduction of the force in the plane-sphere geometry through the `proximity theorem'. Frequency dependent dielectric response functions of the metals are represented either by the simple plasma model or, more accurately, b…
We propose a new theory of thermal Casimir effect, holding for the experimentally important case of metallic surfaces with a roughness having a spatial scale smaller than the skin depth. The theory is based on a simple phenomenological model for a rough conductor, that explicitly takes account of the fact that ohmic conduction in the immediate vicinity of the surface of a conductor is much impeded by surface roughness, if the amplitude of roughness is smaller than the skin depth. As a result of the new model, we find that surface roughness strongly influences the magnitude of the thermal corre…
The Casimir mutual free energy F for a system of two dielectric concentric nonmagnetic spherical bodies is calculated, at arbitrary temperatures. Whereas F has recently been evaluated for the special case of metals (refractive index n=\infty), here analogous results are presented for dielectrics, and shown graphically when n=2.0. Our calculational method relies upon quantum statistical mechanics. The Debye expansions for the Riccati-Bessel functions when carried out to a high order are found to be very useful in practice (thereby overflow/underflow problems are easily avoided), and also to giv…
The Casimir energy for a compact dielectric sphere is considered in a novel way, using the quantum statistical method introduced by H\oye - Stell and others. Dilute media are assumed. It turns out that this method is a very powerful one: we are actually able to derive an expression for the Casimir energy that contains also the negative part resulting from the attractive van der Waals forces between the molecules. It is precisely this part of the Casimir energy that has turned out to be so difficult to extract from the formalism when using the conventional field theoretical methods for a contin…
We analyze the dynamical Casimir effect for a massless scalar field confined between two concentric spherical shells which impose on the field mixed boundary conditions. We thus complement a previous result [Phys. Rev. A \textbf{78}, 032521 (2008)], where the same problem was considered but in that case the field was submitted to a Dirichlet boundary condition in both moving spherical shells. A general expression for the average number of created particles is deduced for an arbitrary law of radial motion of the spherical shells. This expression is then applied to harmonic oscillations of the s…
We investigate the electromagnetic Casimir interactions of an object contained within an otherwise empty, perfectly conducting spherical shell. For a small object we present analytical calculations of the force, which is directed away from the center of the cavity, and the torque, which tends to align the object opposite to the preferred alignment outside the cavity. For a perfectly conducting sphere as the interior object, we compute the corrections to the proximity force approximation (PFA) numerically. In both cases the results for the interior configuration match smoothly onto those for th…
We study the lateral Casimir force between corrugated dielectric plates. We use the dielectric contrast perturbation theory [R. Golestanian, {\it Phys. Rev. Lett.} {\bf 95}, 230601, (2005)], which allows us to consider arbitrary deformations with large amplitudes. We consider sinusoidal, rectangular, and sawtooth corrugations, for samples made of silicon and gold. We use the plasma and Drude-Lorentz models for the permittivity of gold and silicon, respectively. For these geometries and materials, the lateral Casimir force is {\it not} a sinusoidal function of the relative lateral displacement …
Wightman function, the vacuum expectation values of the field square and the energy-momentum tensor are evaluated for a scalar field obeying mixed boundary condition on a spherical brane in (D+1)-dimensional Rindler-like spacetime $Ri\times S^{D-1}$, where $Ri$ is a two-dimensional Rindler spacetime. This spacetime approximates the near horizon geometry of (D+1) -dimensional black hole in the large mass limit. The vacuum expectation values are presented as the sum of boundary-free and brane-induced parts. Further we extract from the Wightman function for the boundary-free geometry the correspo…
In this work we consider the dynamical Casimir effect for a massless scalar field -- under Dirichlet boundary conditions -- between two concentric spherical shells. We obtain a general expression for the average number of particle creation, for an arbitrary law of radial motion of the spherical shells, using two distinct methods: by computing the density operator of the system and by calculating the Bogoliubov coefficients. We apply our general expression to breathing modes: when only one of the shells oscillates and when both shells oscillate in or out of phase. We also analyze the number of …
We consider the finite temperature Casimir free energy acting on a spherical shell in (D+1)-dimensional Minkowski spacetime due to the vacuum fluctuations of scalar and electromagnetic fields. Dirichlet, Neumann, perfectly conducting and infinitely permeable boundary conditions are considered. The Casimir free energy is regularized using zeta functional regularization technique. To renormalize the Casimir free energy, we compute the heat kernel coefficients $c_n$, $0\leq n\leq D+1$, from the zeta function $ζ(s)$. After renormalization, the high temperature leading term of the Casimir free ener…
We calculate the second order roughness correction to the Casimir energy for two parallel metallic mirrors. Our results may also be applied to the plane-sphere geometry used in most experiments. The metallic mirrors are described by the plasma model, with arbitrary values for the plasma wavelength, the mirror separation and the roughness correlation length, with the roughness amplitude remaining the smallest length scale for perturbation theory to hold. From the analysis of the intracavity field fluctuations, we obtain the Casimir energy correction in terms of generalized reflection operators,…
In the present paper we investigate thermal fluctuation corrections to the vacuum energy at zero temperature of a conformally coupled massless scalar field whose modes propagate in the Einstein universe with a spherical boundary, characterized by both Dirichlet and Neumann boundary conditions. Thus, we generalize the results found in literature in this scenario, which has considered only the vacuum energy at zero temperature. To do this, we use the generalized zeta function method plus Abel-Plana formula and calculate the renormalized Casimir free energy as well as other thermodynamics quantit…
Optical properties of the deposited gold films are discussed in connection with the Casimir force prediction. Voids in the films and electron scattering on the grain boundaries reduce the force at small separations on the 2% level in comparison with the bulk material prediction. The contribution of the patch potential due to polycrystalline structure of the films is shown to be small for the existing Casimir force experiments.
Recently the Casimir self-entropy of an electromagnetic $δ$-function shell was considered by two different groups, with apparently discordant conclusions, although both had concluded that a region of negative entropy existed for sufficiently weak coupling. We had found that the entropy contained an infrared divergence, which we argued should be discarded on physical grounds. On the contrary, Bordag and Kirsten recently found a completely finite self-entropy, although they, in fact, have to remove an infrared divergence. Apart from this, the high- and low-temperature results for finite coupling…
We obtain constraints on parameters of the Yukawa-type corrections to Newton's gravitational law from measurements of the gradient of the Casimir force between surfaces coated with ferromagnetic metal Ni and from measurements of the Casimir force between Au-coated sinusoidally corrugated surfaces at various angles between corrugations. It is shown that constraints following from the experiment with magnetic surfaces are slightly weaker than currently available strongest constraints, but benefit from increased reliability and independence of systematic effects.The constraints derived from the e…
We consider the Casimir-Polder interaction energy between a metallic nanoparticle and a metallic plate, as well as the Casimir interaction energy between two macroscopic metal plates, in terms of the many-body dispersion interactions between their constituents. Expressions for two- and three-body dispersion interactions between the microscopic parts of a real metal are first obtained, both in the retarded and non-retarded limits. These expressions are then used to evaluate, a compare each other, the overall two- and three-body contributions to the macroscopic Casimir-Polder and Casimir force, …
We study the electromagnetic Casimir interaction of a compact object contained inside a closed cavity of another compact object. We express the interaction energy in terms of the objects' scattering matrices and translation matrices that relate the coordinate systems appropriate to each object. When the enclosing object is an otherwise empty metallic spherical shell, much larger than the internal object, and the two are sufficiently separated, the Casimir force can be expressed in terms of the static electric and magnetic multipole polarizabilities of the internal object, which is analogous to…
We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable levitation, as the particle is unstable to displacements away from the symmetry axis.
The Casimir interaction between one-dimensional metallic objects (cylinders, wires) displays unconventional features. Here we study the orientation dependence of this interaction by computing the Casimir energy between two inclined cylinders over a wide range of separations. We consider Dirichlet, Neumann and perfect metal boundary conditions, both at zero temperature and in the classical high temperature limit. For all types of boundary conditions, we find that at large distances the interaction decays slowly with distance, similarly to the case of parallel cylinders, and at small distances s…
The Casimir-Polder and van der Waals interaction energy of an atom with infinitely thin sphere with finite conductivity is investigated in the framework of the hydrodynamic approach. We put the sphere into spherical cavity inside the infinite dielectric media, then calculate the energy of vacuum fluctuations in the context of the zeta-function approach. The energy for a single atom is obtained by rarefying media. The Casimir-Polder expression for an atom and plate is recovered in the limit of the infinite radius of the sphere. Assuming a finite radius of the sphere, the interaction energy of a…
We study the Casimir interaction between a dielectric nanosphere and a metallic plane, using the multiple scattering theory. Exact results are obtained with the dielectric described by a Sellmeier model and the metal by a Drude model. Asymptotic forms are discussed for small spheres, large or small distances. The well-known Casimir-Polder formula is recovered at the limit of vanishingly small spheres, while an expression better behaved at small distances is found for any finite value of the radius. The exact results are of particular interest for the study of quantum states of nanospheres in t…
For the Casimir interaction between two nearby objects, the plane-wave basis proves convenient for numerical calculations as well as for analytical considerations leading to an optical interpretation of the relevant scattering processes of electromagnetic waves. We review work on the proximity-force approximation and corrections to it within the plane-wave basis for systems involving spherical objects. Previous work is extended by allowing for polarization mixing during the reflection at a sphere. In particular, explicit results are presented for perfect electromagnetic conductors. Furthermore…
We study the Casimir pressure for a dielectric-diamagnetic cylinder subject to light velocity conservation and with a dispersion law analogous to Sellmeir's rule. Similarities to and differences from the spherical case are pointed out.
