In Phys. Rev. {\bf E 70}, 047102 (2004), J.R. Torgerson and S.K. Lamoreaux investigated for the first time the real-frequency spectrum of finite temperature correction to the Casimir force, for metallic plates of finite conductivity. The very interesting result of this study is that the correction from the TE mode is dominated by low frequencies, for which the dielectric description of the metal is invalid. However, their analysis of the problem, based on more appropriate low-frequency metallic boundary conditions, uses an incorrect form of boundary conditions for TE modes. We repeat their analysis, using the correct boundary conditions. Our computations confirm their most important result: contrary to the result of the dielectric model, the thermal TE mode correction leads to an increase in the TE mode force of attraction between the plates. The magnitude of the correction has a value about twenty times larger than that quoted by them.
The leading semiclassical estimates of the electromagnetic Casimir stresses on a spherical and a cylindrical metallic shell are within 1% of the field theoretical values. The electromagnetic Casimir energy for both geometries is given by two decoupled massless scalars that satisfy conformally covariant boundary conditions. Surface contributions vanish for smooth metallic boundaries and the finite electromagnetic Casimir energy in leading semiclassical approximation is due to quadratic fluctuations about periodic rays in the interior of the cavity only. Semiclassically the non-vanishing Casimir…
I show that reflection positivity implies that the force between any mirror pair of charge-conjugate probes of the quantum vacuum is attractive. This generalizes a recent theorem of Kenneth and Klich to interacting quantum fields, to arbitrary semiclassical bodies, and to quantized probes with non-overlapping wavefunctions. I also prove that the torques on charge-conjugate probes tend always to rotate them into a mirror-symmetric position.
It is shown that recent criticism by C. R. Hagen (hep-th/9902057) questioning the validity of stress tensor treatments of the Casimir energy for space divided into two parts by a spherical boundary is without foundation.
Linear in temperature correction to the Casimir force is discussed. The correction is important for small separations between bodies tested in the recent experiments and disappears in the case of perfect conductors.
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
We reply to the "Comment on 'The Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic mirrors'" [arXiv:1604.06432]. We believe the comment misrepresents our papers, and fails to provide a plausible resolution to the conflict between theory and experiment.
We show that the claims expressed in the Comment arXiv:0810.3244v1 by R.S. Decca et al against our paper, D.A.R. Dalvit and S.K. Lamoreaux, Phys. Rev. Lett. {\bf 101}, 163203 (2008), are wrong and manifestly inconsistent with basic principles of statistical physics.
We comment on a recently published measurement of the Casimir force for distances in the 0.6 to 6 micrometer range between two Au surfaces (Phys. Rev. Lett. 78, 5(1997)) and the net discrepancy reported for the comparison with theoretical predictions (Phys. Rev. Lett. 81, 5475 (1998)).
Recently D. A. R. Dalvit and S. K. Lamoreaux arXiv:0805.1676 [Phys. Rev. Lett. v.101, 163203 (2008)] suggested the modification of the reflection coefficients in the Lifshitz theory taking into account the screening effects and diffusion currents. We demonstrate that the suggested modification is thermodynamically and experimentally inconsistent.
We give an exact series expansion of the Casimir force between plane and spherical metallic surfaces in the non trivial situation where the sphere radius $R$, the plane-sphere distance $L$ and the plasma wavelength $λ_¶$ have arbitrary relative values. We then present numerical evaluation of this expansion for not too small values of $L/R$. For metallic nanospheres where $R, L$ and $λ_¶$ have comparable values, we interpret our results in terms of a correlation between the effects of geometry beyond the proximity force approximation (PFA) and of finite reflectivity due to material properties. …
We make remarks on Hoodbhoy's paper [J. Phys. A: Math. Gen. 38 (2005) 10253-10256] by pointing out the single plate considered could be elastic and there will be deformations once the net (one-sided) force being upon the plate which will change the position-dependent potential imposed by Hoodbhoy.
In a recent paper (M. Bostrom and Bo E. Sernelius, Phys. Rev. Lett. 84, 4757 (2000)) the combined effect of finite conductivity and finite temperature on the Casimir force is analyzed, and significant deviations from other theoretical results and a recent experiment are obtained. In this Comment, I show that the extrapolation to zero frequency is incorrect because the authors have neglected that the wavenumber and frequency of the electromagentic mode must simultaneously appraoch zero
A recent theoretical calculation shows that the Casimir force between two parallel plates can be repulsive for plates with nontrivial magnetic properties (O. Kenneth et al., Phys. Rev. Lett. 89, 033001 (2002)). According to the authors, the effect may be observed with known materials, such as ferrites and garnets, and it might be possible to engineer micro- or nanoelectromechanical systems (MEMS or NEMS) that could take advantage of a short range repulsive force. Here we show that on the contrary the Casimir force between two parallel plates in vacuum at micron and submicron distance is always…
The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is shown to be incorrect.
Recently, Brevik et al. [Phys. Rev. E 71, 056101 (2005)] adduced arguments against the traditional approach to the thermal Casimir force between real metals and in favor of one of the alternative approaches. The latter assumes zero contribution from the transverse electric mode at zero frequency in qualitative disagreement with unity as given by the thermal quantum field theory for ideal metals. Those authors claim that their approach is consistent with experiments as well as with thermodynamics. We demonstrate that these conclusions are incorrect. We show specifically that their results are c…
In a recent paper [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)] an electromagnetic energy-momentum tensor is suggested as an alternative to the Abraham-Minkowski tensor and is applied to calculations of Casimir forces in planar geometries. We argue that the universality of the suggested tensor is doubtful; application of the Raabe-Welsch theory to a simple example in classical electrodynamics shows that their proposed tensor is unable to describe the situation in a simple way. We also show that modified Casimir forces acting on the cavity medium as prescribed by these authors suf…
Recently J.S. Hoye, I.Brevik, J.B. Aarseth, and K.A. Milton [Phys. Rev. E v.67, 056116 (2003); quant-ph/0212125] proposed that if the Lifshitz formula is combined with the Drude model, the transverse electric zero mode does not contribute to the result for real metals and there arises a linear temperature correction to the Casimir force at small temperatures. The authors claim that in spite of the fact that the Casimir entropy in their approach is negative, the Nernst heat theorem is satisfied. In the present Comment we show that the authors' conclusion regarding the Nernst heat theorem is in …
We have performed comparative measurements of the Casimir force between a metallic plate and a transparent sphere coated with metallic films of different thicknesses. We have observed that, if the thickness of the coating is less than the skin-depth of the electromagnetic modes that mostly contribute to the interaction, the force is significantly smaller than that measured with a thick bulk-like film. Our results provide the first direct evidence of the skin-depth effect on the Casimir force between metallic surfaces.
Recently Guerout et al. [Phys. Rev. E, v.93, 022108 (2016)] advocated that the lossless plasma model has to be redefined as the limit of the Drude model when the relaxation parameter goes to zero. It was claimed that the previously used plasma model cannot correctly describe the Casimir pressure between two plates made of both nonmagnetic and magnetic metals and has to be replaced with the redefined one. We show that the suggested redefinition does not satisfy necessary physical requirements imposed on the dielectric permittivity. We also present a plausible explanation to the fact that the lo…
We derive an analytic behavior of the Casimir free energy, entropy and pressure of metallic films in vacuum at low temperature. It is shown that this behavior differs significantly depending on whether the plasma or the Drude model is used to describe the dielectric properties of film metal. For metallic films described by the lossless plasma model the thermal corrections to the Casimir energy and pressure drop to zero exponentially fast with increasing film thickness. There is no classical limit in this case. The Casimir entropy satisfies the Nernst heat theorem. For metallic films with perfe…
In a recent paper, Geyer, Klimchitskaya, and Mostepanenko [Phys. Rev. A 67, 062102 (2003); quant-ph/0306038] proposed the final solution of the problem of temperature correction to the Casimir force between real metals. The basic idea was that one cannot use the dielectric permittivity in the frequency region where a real current may arise leading to Joule heating of the metal. Instead, the surface impedance approach is proposed as a solution of all contradictions. The purpose of this comment is to show that (i) the main idea contradicts to the fluctuation dissipation theorem, (ii) the propose…
The Casimir effect is investigated in cylindrical and toroidal carbon nanotubes within the framework of the Dirac-like model for the electronic states. The topological Casimir energy is positive for metallic cylindrical nanotubes and is negative for semiconducting ones. The toroidal compactification of a cylindrical nanotube along its axis increases the Casimir energy for metallic-type (periodic) boundary conditions along its axis and decreases the Casimir energy for the semiconducting-type compactifications. For finite length metallic nanotubes the Casimir forces acting on the tube edges are …
Recently D. Garcia-Sanches, K. Y. Fong, H. Bhaskaran, S. Lamoreaux, and H. X. Tang [Phys. Rev. Lett. v.109, 027202 (2012)] claimed that the frequency shift of an oscillator under the influence of the residual electric and Casimir forces is best described by the Drude model approach to the Casimir force and excludes the plasma model approach. We demonstrate that calculations in support of this claim are performed incorrectly and that the measured data are in strong disagreement with both theoretical approaches to the Casimir force, thus, suggesting the presence of an unaccounted systematic erro…
The Casimir force between two metallic plates is affected by their roughness state. This effect is usually calculated through the so-called `proximity force approximation' which is only valid for small enough wavevectors in the spectrum of the roughness profile. We introduce here a more general description with a wavevector-dependent roughness sensitivity of the Casimir effect. Since the proximity force approximation underestimates the effect, a measurement of the roughness spectrum is needed to achieve the desired level of accuracy in the theory-experiment comparison.
We have reviewed the Comment of Geyer et al. [arXiv:0708.1548] concerning our recent work [Phys. Rev. A 75, 060102 (R) (2007)], and while we disagree with their criticisms, we acknowledge them for giving us the opportunity to add interesting addition material and a more detailed description of our experiment. We describe further our calculation and explain why a more sophisticated model is not warranted. We also present detailed experiments on the effects of electrostatic forces in our measurements and show that the contribution due to work function differences is small and that the residual e…
The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for sub-micron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated in the case of ohmic conductors, because optical data do not usually extend to sufficiently low frequencies to permit an accurate evaluation of the standard Kramers-Kronig integral used to compute $ε…
We argue that the appropriate variable to study a non trivial geometry dependence of the Casimir force is the lateral component of the Casimir force, which we evaluate between two corrugated metallic plates outside the validity of the Proximity Force Approximation (PFA). The metallic plates are described by the plasma model, with arbitrary values for the plasma wavelength, the plate separation and the corrugation period, the corrugation amplitude remaining the smallest length scale. Our analysis shows that in realistic experimental situations the Proximity Force Approximation overestimates the…
We calculate the Casimir force and free energy for plane metallic mirrors at non-zero temperature. Numerical evaluations are given with temperature and conductivity effects treated simultaneously. The results are compared with the approximation where both effects are treated independently and the corrections simply multiplied. The deviation between the exact and approximated results takes the form of a temperature dependent function for which an analytical expression is given. The knowledge of this function allows simple and accurate estimations at the % level.
We examine the conditions of validity for the Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic plane mirrors. As in the previously studied case of non-magnetic materials (Guerout et al, Phys. Rev. E 90 042125), we recover the usual expression for the lossy model of optical response, but not for the lossless plasma model. We also show that the modes associated with the Foucault currents play a crucial role in the limit of vanishing losses, in contrast to expectations.
We carefully re-examine the conditions of validity for the consistent derivation of the Lifshitz-Matsubara sum formula for the Casimir pressure between metallic plane mirrors. We recover the usual expression for the lossy Drude model, but not for the lossless plasma model. We give an interpretation of this new result in terms of the modes associated with the Foucault currents which play a role in the limit of vanishing losses, in contrast to common expectations.
Casimir-Polder potential is investigated for a polarizable microparticle in the geometry of a straight cosmic string with a metallic cylindrical shell. The electromagnetic field Green tensor is evaluated on the imaginary frequency axis. The expressions for the Casimir-Polder potential is derived in the general case of anisotropic polarizability for the both interior and exterior regions of the shell. The potential is decomposed into pure string and shell-induced parts. The latter dominates for points near the shell, whereas the pure string part is dominant near the string and at large distance…
We consider two parallel corrugated plates and show that a Casimir torque arises when the corrugation directions are not aligned. We follow the scattering approach and calculate the Casimir energy up to second order in the corrugation amplitudes, taking into account nonspecular reflections, polarization mixing and the finite conductivity of the metals. We compare our results with the proximity force approximation, which overestimates the torque by a factor 2 when taking the conditions that optimize the effect. We argue that the Casimir torque could be measured for separation distances as large…
Recently V. A. Yampol'skii, S. Savel'ev, Z. A. Mayselis, S. S. Apostolov, and F. Nori [Phys. Rev. Lett., v.101, 096803 (2008),arXiv:0712.1395] claimed that the Casimir force between a thin metal film described by the Drude model and an ideal metal semispace can decrease with temperature whereas for bulk samples the Casimir force increases with temperature. On this basis the experimental observation of the decreasing temperature dependence of the Casimir force magnitude between a film and a bulk ideal metal was proposed. We demonstrate that, contrary to what is claimed by the authors, the magni…
The frequency spectrum of the finite temperature correction to the Casimir force can be determined by the use of the Lifshitz formalism for metallic plates of finite conductivity. We show that the correction for the TE electromagnetic modes is dominated by frequencies so low that the plates cannot be modelled as ideal dielectrics. We also address the issues relating to the behavior of electromagnetic fields at the surfaces an within metallic conductors, and claculate the surface modes using appropriate low-frequency metallic boundary conditions. Our result brings the tehrmal correction into ag…
The frequency spectrum of the finite temperature correction to the Casimir force can be determined by use of the Lifshitz formalism for metallic plates of finite conductivity. We show that the correction for the $TE$ electromagnetic modes is dominated by frequencies so low that the plates cannot be modelled as ideal dielectrics. We also address issues relating to the behavior of electromagnetic fields at the surfaces and within metallic conductors, and calculate the surface modes using appropriate low-frequency metallic boundary conditions. Our result brings the thermal correction into agreeme…
Recently Yampol'skii et al. [Phys. Rev. A v.82, 032511 (2010)] advocated that Lifshitz theory is not applicable when the characteristic wavelength of the fluctuating electromagnetic field, responsible for the thermal correction to the Casimir force, is larger than the size of the metal test bodies. It was claimed that this is the case in experiments which exclude Lifshitz theory combined with the Drude model. We calculate the wavelengths of the evanescent waves giving the dominant contribution to the thermal correction and we find that they are much smaller than the sizes of the test bodies. T…
We study the influence of finite conductivity of metals on the Casimir effect. We put the emphasis on explicit theoretical evaluations which can help comparing experimental results with theory. The reduction of the Casimir force is evaluated for plane metallic plates. The reduction of the Casimir energy in the same configuration is also calculated. It can be used to infer the reduction of the force in the plane-sphere geometry through the `proximity theorem'. Frequency dependent dielectric response functions of the metals are represented either by the simple plasma model or, more accurately, b…
For the first time, we have studied the impact of magnetic polarizability of a neutral metallic particle on the dynamical Casimir-Polder force, when the particle is uniformly moving with relativistic velocity parallel to the surface of an ideally conducting plate. The material properties of particle are taken into account within the Drude model approach.
We propose a new theory of thermal Casimir effect, holding for the experimentally important case of metallic surfaces with a roughness having a spatial scale smaller than the skin depth. The theory is based on a simple phenomenological model for a rough conductor, that explicitly takes account of the fact that ohmic conduction in the immediate vicinity of the surface of a conductor is much impeded by surface roughness, if the amplitude of roughness is smaller than the skin depth. As a result of the new model, we find that surface roughness strongly influences the magnitude of the thermal corre…
We study the lateral Casimir force between corrugated dielectric plates. We use the dielectric contrast perturbation theory [R. Golestanian, {\it Phys. Rev. Lett.} {\bf 95}, 230601, (2005)], which allows us to consider arbitrary deformations with large amplitudes. We consider sinusoidal, rectangular, and sawtooth corrugations, for samples made of silicon and gold. We use the plasma and Drude-Lorentz models for the permittivity of gold and silicon, respectively. For these geometries and materials, the lateral Casimir force is {\it not} a sinusoidal function of the relative lateral displacement …
In a recent Comment, Decca et al. [Phys. Rev. A 79, 026101 (2009); arXiv:0809.3576] discussed the origin of the anomalies recently reported by us in Phys. Rev. A 78, 036102(R) (2008); arXiv:0812.0028 . Here we restate our view, corroborated by their considerations, that quantitative geometrical and electrostatic characterizations of the conducting surfaces (a topic not discussed explicitly in the literature until very recently) are critical for the assessment of precision and accuracy of the demonstration of the Casimir force and for deriving meaningful limits on the existence of Yukawian comp…
We calculate the second order roughness correction to the Casimir energy for two parallel metallic mirrors. Our results may also be applied to the plane-sphere geometry used in most experiments. The metallic mirrors are described by the plasma model, with arbitrary values for the plasma wavelength, the mirror separation and the roughness correlation length, with the roughness amplitude remaining the smallest length scale for perturbation theory to hold. From the analysis of the intracavity field fluctuations, we obtain the Casimir energy correction in terms of generalized reflection operators,…
We obtain constraints on parameters of the Yukawa-type corrections to Newton's gravitational law from measurements of the gradient of the Casimir force between surfaces coated with ferromagnetic metal Ni and from measurements of the Casimir force between Au-coated sinusoidally corrugated surfaces at various angles between corrugations. It is shown that constraints following from the experiment with magnetic surfaces are slightly weaker than currently available strongest constraints, but benefit from increased reliability and independence of systematic effects.The constraints derived from the e…
Optical properties of the deposited gold films are discussed in connection with the Casimir force prediction. Voids in the films and electron scattering on the grain boundaries reduce the force at small separations on the 2% level in comparison with the bulk material prediction. The contribution of the patch potential due to polycrystalline structure of the films is shown to be small for the existing Casimir force experiments.
We consider the Casimir-Polder interaction energy between a metallic nanoparticle and a metallic plate, as well as the Casimir interaction energy between two macroscopic metal plates, in terms of the many-body dispersion interactions between their constituents. Expressions for two- and three-body dispersion interactions between the microscopic parts of a real metal are first obtained, both in the retarded and non-retarded limits. These expressions are then used to evaluate, a compare each other, the overall two- and three-body contributions to the macroscopic Casimir-Polder and Casimir force, …
We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable levitation, as the particle is unstable to displacements away from the symmetry axis.
The Casimir interaction between one-dimensional metallic objects (cylinders, wires) displays unconventional features. Here we study the orientation dependence of this interaction by computing the Casimir energy between two inclined cylinders over a wide range of separations. We consider Dirichlet, Neumann and perfect metal boundary conditions, both at zero temperature and in the classical high temperature limit. For all types of boundary conditions, we find that at large distances the interaction decays slowly with distance, similarly to the case of parallel cylinders, and at small distances s…
We study the Casimir interaction between a dielectric nanosphere and a metallic plane, using the multiple scattering theory. Exact results are obtained with the dielectric described by a Sellmeier model and the metal by a Drude model. Asymptotic forms are discussed for small spheres, large or small distances. The well-known Casimir-Polder formula is recovered at the limit of vanishingly small spheres, while an expression better behaved at small distances is found for any finite value of the radius. The exact results are of particular interest for the study of quantum states of nanospheres in t…
In this paper we study the Casimir energy of a sample made by N cavities, with N >> 1, across the transition from the metallic to the superconducting phase of the constituting plates. After having characterized the energy for the configuration in which the layers constituting the cavities are made by dielectric and for the configuration in which the layers are made by plasma sheets, we concentrate our analysis on the latter. It represents the final step towards the macroscopic characterization of a "multi cavity" (with N large) necessary to fully understand the behaviour of the Casimir energy …
We evaluate the renormalized vacuum expectation values (VEVs) of electric and magnetic fields squared and the energy-momentum tensor for the electromagnetic field in the geometry of two parallel conducting plates on background of cosmic string spacetime. On the base of these results, the Casimir-Polder force on a polarizable particle and the Casimir forces acting on the plates are investigated. The VEVs are decomposed into the pure string and plate-induced parts. The VEV of the electric field squared is negative for points with radial distance to the string smaller than the distance to the pla…
We study the torque arising between two corrugated metallic plates due to the interaction with electromagnetic vacuum. This Casimir torque can be measured with torsion pendulum techniques for separation distances as large as 1$μ$m. It allows one to probe the nontrivial geometry dependence of the Casimir energy in a configuration which can be evaluated theoretically with accuracy. In the optimal experimental configuration, the commonly used proximity force approximation turns out to overestimate the torque by a factor 2 or larger.
We report on the measurement of the Casimir force between conducting surfaces in a parallel configuration. The force is exerted between a silicon cantilever coated with chromium and a similar rigid surface and is detected looking at the shifts induced in the cantilever frequency when the latter is approached. The scaling of the force with the distance between the surfaces was tested in the 0.5 - 3.0 $μ$m range, and the related force coefficient was determined at the 15% precision level.
The finite temperature Casimir effect for a scalar field in the bulk region of the two Randall-Sundrum models, RSI and RSII, is studied. We calculate the Casimir energy and the Casimir force for two parallel plates with separation $a$ on the visible brane in the RSI model. High-temperature and low-temperature cases are covered. Attractiveness versus repulsiveness of the temperature correction to the force is discussed in the typical special cases of Dirichlet-Dirichlet, Neumann-Neumann, and Dirichlet-Neumann boundary conditions at low temperature. The Abel-Plana summation formula is made use o…
The frequencies of transitions between hyperfine levels of ground-state atoms can be measured with exquisite precision using magnetic-resonance techniques. This makes hyperfine transitions ideal probes of QED effects originating from the interaction of atoms with the quantized electromagnetic field. One of the most remarkable effects predicted by QED is the Casimir-Polder shift experienced by the energy levels of atoms placed near one or more dielectric objects. Here we compute the Casimir-Polder shift and the width of hyperfine transitions between ground-state Zeeman sub-levels of an hydrogen…
There has been recent criticism of our approach to the Casimir force between real metallic surfaces at finite temperature, saying it is in conflict with the third law of thermodynamics and in contradiction with experiment. We show that these claims are unwarranted, and that our approach has strong theoretical support, while the experimental situation is still unclear.
Recently J.N. Munday and F. Capasso [Phys. Rev. A {\bf 75}, 060102(R) (2007); arXiv:0705.3793] claimed that they have performed a precision measurement of the Casimir force between a sphere and a plate coated with Au, both immersed in ethanol. The measurement results were claimed to be consistent with the Lifshitz theory. We demonstrate that the calculation of the Casimir force between the smooth bodies following the authors prescription has a discrepancy up to 25% with respect to authors result. We show also that the attractive electrostatic force only due to the surface potential differences…
