I show that reflection positivity implies that the force between any mirror pair of charge-conjugate probes of the quantum vacuum is attractive. This generalizes a recent theorem of Kenneth and Klich to interacting quantum fields, to arbitrary semiclassical bodies, and to quantized probes with non-overlapping wavefunctions. I also prove that the torques on charge-conjugate probes tend always to rotate them into a mirror-symmetric position.
It is shown that recent criticism by C. R. Hagen (hep-th/9902057) questioning the validity of stress tensor treatments of the Casimir energy for space divided into two parts by a spherical boundary is without foundation.
Linear in temperature correction to the Casimir force is discussed. The correction is important for small separations between bodies tested in the recent experiments and disappears in the case of perfect conductors.
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
We reply to the "Comment on 'The Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic mirrors'" [arXiv:1604.06432]. We believe the comment misrepresents our papers, and fails to provide a plausible resolution to the conflict between theory and experiment.
We show that the claims expressed in the Comment arXiv:0810.3244v1 by R.S. Decca et al against our paper, D.A.R. Dalvit and S.K. Lamoreaux, Phys. Rev. Lett. {\bf 101}, 163203 (2008), are wrong and manifestly inconsistent with basic principles of statistical physics.
We comment on a recently published measurement of the Casimir force for distances in the 0.6 to 6 micrometer range between two Au surfaces (Phys. Rev. Lett. 78, 5(1997)) and the net discrepancy reported for the comparison with theoretical predictions (Phys. Rev. Lett. 81, 5475 (1998)).
Recently D. A. R. Dalvit and S. K. Lamoreaux arXiv:0805.1676 [Phys. Rev. Lett. v.101, 163203 (2008)] suggested the modification of the reflection coefficients in the Lifshitz theory taking into account the screening effects and diffusion currents. We demonstrate that the suggested modification is thermodynamically and experimentally inconsistent.
We make remarks on Hoodbhoy's paper [J. Phys. A: Math. Gen. 38 (2005) 10253-10256] by pointing out the single plate considered could be elastic and there will be deformations once the net (one-sided) force being upon the plate which will change the position-dependent potential imposed by Hoodbhoy.
In Phys. Rev. {\bf E 70}, 047102 (2004), J.R. Torgerson and S.K. Lamoreaux investigated for the first time the real-frequency spectrum of finite temperature correction to the Casimir force, for metallic plates of finite conductivity. The very interesting result of this study is that the correction from the TE mode is dominated by low frequencies, for which the dielectric description of the metal is invalid. However, their analysis of the problem, based on more appropriate low-frequency metallic boundary conditions, uses an incorrect form of boundary conditions for TE modes. We repeat their ana…
In a recent paper (M. Bostrom and Bo E. Sernelius, Phys. Rev. Lett. 84, 4757 (2000)) the combined effect of finite conductivity and finite temperature on the Casimir force is analyzed, and significant deviations from other theoretical results and a recent experiment are obtained. In this Comment, I show that the extrapolation to zero frequency is incorrect because the authors have neglected that the wavenumber and frequency of the electromagentic mode must simultaneously appraoch zero
A recent theoretical calculation shows that the Casimir force between two parallel plates can be repulsive for plates with nontrivial magnetic properties (O. Kenneth et al., Phys. Rev. Lett. 89, 033001 (2002)). According to the authors, the effect may be observed with known materials, such as ferrites and garnets, and it might be possible to engineer micro- or nanoelectromechanical systems (MEMS or NEMS) that could take advantage of a short range repulsive force. Here we show that on the contrary the Casimir force between two parallel plates in vacuum at micron and submicron distance is always…
The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is shown to be incorrect.
Recently, Brevik et al. [Phys. Rev. E 71, 056101 (2005)] adduced arguments against the traditional approach to the thermal Casimir force between real metals and in favor of one of the alternative approaches. The latter assumes zero contribution from the transverse electric mode at zero frequency in qualitative disagreement with unity as given by the thermal quantum field theory for ideal metals. Those authors claim that their approach is consistent with experiments as well as with thermodynamics. We demonstrate that these conclusions are incorrect. We show specifically that their results are c…
In a recent paper [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)] an electromagnetic energy-momentum tensor is suggested as an alternative to the Abraham-Minkowski tensor and is applied to calculations of Casimir forces in planar geometries. We argue that the universality of the suggested tensor is doubtful; application of the Raabe-Welsch theory to a simple example in classical electrodynamics shows that their proposed tensor is unable to describe the situation in a simple way. We also show that modified Casimir forces acting on the cavity medium as prescribed by these authors suf…
Recently J.S. Hoye, I.Brevik, J.B. Aarseth, and K.A. Milton [Phys. Rev. E v.67, 056116 (2003); quant-ph/0212125] proposed that if the Lifshitz formula is combined with the Drude model, the transverse electric zero mode does not contribute to the result for real metals and there arises a linear temperature correction to the Casimir force at small temperatures. The authors claim that in spite of the fact that the Casimir entropy in their approach is negative, the Nernst heat theorem is satisfied. In the present Comment we show that the authors' conclusion regarding the Nernst heat theorem is in …
Recently Guerout et al. [Phys. Rev. E, v.93, 022108 (2016)] advocated that the lossless plasma model has to be redefined as the limit of the Drude model when the relaxation parameter goes to zero. It was claimed that the previously used plasma model cannot correctly describe the Casimir pressure between two plates made of both nonmagnetic and magnetic metals and has to be replaced with the redefined one. We show that the suggested redefinition does not satisfy necessary physical requirements imposed on the dielectric permittivity. We also present a plausible explanation to the fact that the lo…
In a recent paper, Geyer, Klimchitskaya, and Mostepanenko [Phys. Rev. A 67, 062102 (2003); quant-ph/0306038] proposed the final solution of the problem of temperature correction to the Casimir force between real metals. The basic idea was that one cannot use the dielectric permittivity in the frequency region where a real current may arise leading to Joule heating of the metal. Instead, the surface impedance approach is proposed as a solution of all contradictions. The purpose of this comment is to show that (i) the main idea contradicts to the fluctuation dissipation theorem, (ii) the propose…
Recently D. Garcia-Sanches, K. Y. Fong, H. Bhaskaran, S. Lamoreaux, and H. X. Tang [Phys. Rev. Lett. v.109, 027202 (2012)] claimed that the frequency shift of an oscillator under the influence of the residual electric and Casimir forces is best described by the Drude model approach to the Casimir force and excludes the plasma model approach. We demonstrate that calculations in support of this claim are performed incorrectly and that the measured data are in strong disagreement with both theoretical approaches to the Casimir force, thus, suggesting the presence of an unaccounted systematic erro…
We have reviewed the Comment of Geyer et al. [arXiv:0708.1548] concerning our recent work [Phys. Rev. A 75, 060102 (R) (2007)], and while we disagree with their criticisms, we acknowledge them for giving us the opportunity to add interesting addition material and a more detailed description of our experiment. We describe further our calculation and explain why a more sophisticated model is not warranted. We also present detailed experiments on the effects of electrostatic forces in our measurements and show that the contribution due to work function differences is small and that the residual e…
Recently V. A. Yampol'skii, S. Savel'ev, Z. A. Mayselis, S. S. Apostolov, and F. Nori [Phys. Rev. Lett., v.101, 096803 (2008),arXiv:0712.1395] claimed that the Casimir force between a thin metal film described by the Drude model and an ideal metal semispace can decrease with temperature whereas for bulk samples the Casimir force increases with temperature. On this basis the experimental observation of the decreasing temperature dependence of the Casimir force magnitude between a film and a bulk ideal metal was proposed. We demonstrate that, contrary to what is claimed by the authors, the magni…
Recently Yampol'skii et al. [Phys. Rev. A v.82, 032511 (2010)] advocated that Lifshitz theory is not applicable when the characteristic wavelength of the fluctuating electromagnetic field, responsible for the thermal correction to the Casimir force, is larger than the size of the metal test bodies. It was claimed that this is the case in experiments which exclude Lifshitz theory combined with the Drude model. We calculate the wavelengths of the evanescent waves giving the dominant contribution to the thermal correction and we find that they are much smaller than the sizes of the test bodies. T…
In a recent Comment, Decca et al. [Phys. Rev. A 79, 026101 (2009); arXiv:0809.3576] discussed the origin of the anomalies recently reported by us in Phys. Rev. A 78, 036102(R) (2008); arXiv:0812.0028 . Here we restate our view, corroborated by their considerations, that quantitative geometrical and electrostatic characterizations of the conducting surfaces (a topic not discussed explicitly in the literature until very recently) are critical for the assessment of precision and accuracy of the demonstration of the Casimir force and for deriving meaningful limits on the existence of Yukawian comp…
The finite temperature Casimir effect for a scalar field in the bulk region of the two Randall-Sundrum models, RSI and RSII, is studied. We calculate the Casimir energy and the Casimir force for two parallel plates with separation $a$ on the visible brane in the RSI model. High-temperature and low-temperature cases are covered. Attractiveness versus repulsiveness of the temperature correction to the force is discussed in the typical special cases of Dirichlet-Dirichlet, Neumann-Neumann, and Dirichlet-Neumann boundary conditions at low temperature. The Abel-Plana summation formula is made use o…
Recently J.N. Munday and F. Capasso [Phys. Rev. A {\bf 75}, 060102(R) (2007); arXiv:0705.3793] claimed that they have performed a precision measurement of the Casimir force between a sphere and a plate coated with Au, both immersed in ethanol. The measurement results were claimed to be consistent with the Lifshitz theory. We demonstrate that the calculation of the Casimir force between the smooth bodies following the authors prescription has a discrepancy up to 25% with respect to authors result. We show also that the attractive electrostatic force only due to the surface potential differences…
We present the status of an experimental test for gravitational strength forces below 1 mm. Our experiment uses small 1 kilohertz oscillators as test masses, with a stiff counducting shield between them to suppress backgrounds. At the present sensitivity of approximately 1000 times gravitational strength, we see no evidence for new forces with interaction ranges between 75 microns and 1 mm. While the Casimir background is not expected to be significant at this range, an extension of the shielding technique we employ may be useful for reducing this background in experiments below a few microns.…
Recently W. J. Kim, M. Brown-Hayes, D. A. R. Dalvit, J. H. Brownell, and R. Onofrio [Phys. Rev. A, v.78, 036102(R) (2008)] performed electrostatic calibrations for a plane plate above a centimeter-size spherical lens at separations down to 20-30 nm and observed "anomalous behavior". It was found that the gradient of the electrostatic force does not depend on separation as predicted on the basis of a pure Coulombian contribution. Some hypotheses which could potentially explain the deviation from the expected behavior were considered, and qualitative arguments in favor of the influence of patch …
Recently, Høye, Brevik, Ellingsen and Aarseth (quant-ph/0703174) claimed that the use of the Drude dielectric function leads to zero Casimir entropy at zero temperature in accordance with Nernst's theorem. We demonstrate that their proof is not applicable to metals with perfect crystal lattices having no impurities. Thus there is no any contradiction with previous results in the literature proving that the Drude dielectric function violates the Nernst theorem for the Casimir entropy in the case of perfect crystal lattices. We also indicate mistakes in the coefficients of their asymptotic expre…
Here we reply to the comment of Li et al. (arXiv:2009.09377) on the preprint (arXiv:2003.00760) of our publication (Z. Naturforsch. A 75, 803-807; DOI:10.1515/zna-2020-0204).
We comment on the recent work [1], and on its relations with our papers [2,3] cited therein. In particular we show that, contrarily to what stated in [1], the Casimir energy density determined therein in the case of a single delta-like singularity coincides with the energy density obtained previously in our paper [2] using a different approach.
In a recent letter [Phys. Rev. Lett. 91, 220801 (2003)], V. Mkrtchian and co-workers calculated the radiation pressure force on a moving body, assuming the electromagnetic field to be at temperature $T,$ and the velocity to be much smaller than $c.$ They considered both dielectrics and conductors, and related the effect to Casimir dissipative forces. Here we claim that their approach may only apply in the Rayleigh-Ganz scattering regime, which corresponds to very small particles and/or electromagnetically rarefied media. Moreover, we argue that their interpretation in terms of the Casimir effe…
Recently Bo E. Sernelius [Phys. Rev. B {\bf 71}, 235114 (2005)] investigated the effects of spatial dispersion on the thermal Casimir force between two metal half spaces. He claims that incorporating spatial dispersion results in a negligible contribution from the transverse electric mode at zero frequency as compared to the transverse magnetic mode. We demonstrate that this conclusion is not reliable because, when applied to the Casimir effect, the approximate description of spatial dispersion used is unjustified.
From energy considerations there is reason to expect that the work done by Casimir forces during a slow displacement of the parallel plates reflects the free energy of the surface tension of the adjacent surfaces. We show this explicitly, for a one-component ionic fluid or plasma with $q_c$ as ionic charge, where the particles are neutralized by a uniform continuous oppositely charged background. For two equal half-planes, the surface-associated free energy for one half-plane turns out to be just one half of the total Casimir energy for the conventional Casimir setup. We also comment, from a w…
We comment on progress in measurements of the Casimir force and discuss what is the actual reliability of different experiments. In this connection a more rigorous approach to the usage of such concepts as accuracy, precision, and measure of agreement between experiment and theory, is presented. We demonstrate that all measurements of the Casimir force employing spherical lenses with centimeter-size curvature radii are fundamentally flawed due to the presence of bubbles and pits on their surfaces. The commonly used formulation of the proximity force approximation is shown to be inapplicable fo…
The Casimir effect for spherical geometry is calculated using generalized Thermofield Dynamics for the case of scalar field. Casimir force and Casimir pressure are presented. It is found that for high temperatures the Casimir force does change sign.
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive. We present three scenarios in which that is not true. Two of these depend on mixing two types of boundary conditions. The other, however, is a simple type of quantum graph in which the sign of the force depends upon the number of edges.
Electrostatic patch potentials give rise to forces between neutral conductors at distances in the micrometer range and must be accounted for in the analysis of Casimir force experiments. In this paper we develop a quasi-local model for describing random potentials on metallic surfaces. In contrast to some previously published results, we find that patches may provide a significant contribution to the measured signal, and may render the experimental data at distances below 1 micrometer compatible with theoretical predictions based on the Drude model.
We study novel contributions to the partition function of the Maxwell system defined on a small compact manifold ${\mathbb{M}}$ with nontrivial mappings $π_1[U(1)]\cong\mathbb{Z}$. These contributions cannot be described in terms of conventional physical propagating photons with two transverse polarizations, and instead emerge as a result of tunneling transitions between topologically different but physically identical vacuum winding states.\exclude{These new terms give an extra contribution to the Casimir pressure, yet to be measured.} We argue that if the same system is considered in the bac…
In this talk I review various developments in the past year concerning quantum vacuum energy, the Casimir effect. In particular, there has been continuing controversy surrounding the temperature correction to the Lifshitz formula for the Casimir force between real materials, be they metals or semiconductors. Consensus has emerged as to how Casimir energy accelerates in a weak gravitational field; quantum vacuum energy, including the divergent parts which renormalize the masses of the Casimir plates, accelerates indeed according to the equivalence principle. Significant development has been for…
We discuss repulsive Casimir forces between dielectric materials with non trivial magnetic susceptibility. It is shown that considerations based on naive pair-wise summation of Van der Waals and Casimir Polder forces may not only give an incorrect estimate of the magnitude of the total Casimir force, but even the wrong sign of the force when materials with high dielectric and magnetic response are involved. Indeed repulsive Casimir forces may be found in a large range of parameters, and we suggest that the effect may be realized in known materials. The phenomenon of repulsive Casimir forces ma…
We study the Casimir effect at finite temperature for a massless scalar field in the parallel plates geometry in N spatial dimensions, under various combinations of Dirichlet and Neumann boundary conditions on the plates. We show that in all these cases the entropy, in the limit where energy equipartitioning applies, is a geometrical factor whose sign determines the sign of the Casimir force.
In this work we consider a fermionic chain of finite length $\ell$. Fermions are allowed to interact and are forced to obey boundary conditions, thus altering the process of condensation. Our goal is to explore how this affects the quantum vacuum energy for this system. We approach this problem by using a self-consistent method and observe a nontrivial behavior in the Casimir force, displaying a switch from an attractive to a repulsive regime. This flip stems from the competition between the attractive contribution from the usual fermionic Casimir effect and a repulsive one coming from the con…
In a recent paper [1] the Casimir energy was calculated for a massive dirac field in (1+1) dimensional space-time in the presence of an inverse square well potential and shown to be positive. It will be shown that this result violates a key assumption of quantum field theory which is that the vacuum state is the state of minimum energy. The reason for this discrepancy is examined and is shown to be related to the way the charge density operator is defined. If the charge density operator is defined using point splitting then an extra term will be added to the charge which will result in the Cas…
We investigate repulsive Casimir force between slabs containing left-handed materials with controllable electromagnetic properties. The sign of Casimir force is determined by the electric and magnetic properties of the materials, and it is shown that the formation of the repulsive force is related to the wave impedances of two slabs. The sign change of the Casimir force as a function of the distance is studied. Special emphasis is put on the restoring Casimir force which may be found to exist between perfectly conducting material and metamaterial slabs. This restoring force is a natural power …
The Casimir-Lifshitz torque between two biaxially polarizable anisotropic planar slabs is shown to exhibit a non-trivial sign-reversal in its rotational sense. The critical distance $a_c$ between the slabs that marks this reversal is characterized by the frequency $ω_c\!\sim \!c/2a_c$ at which the in-planar polarizabilities along the two principal axes are equal. The two materials seek to align their principal axes of polarizabilities in one direction below $a_c$, while above $a_c$ their axes try to align rotated perpendicular relative to their previous minimum energy orientation. The sign-rev…
We critically discuss the common belief that the thermal Casimir-Polder force can always be represented as a Matsubara sum, as it is true for the Casimir force. On the contrary, an exact treatment of the atom-field coupling reveals that for a ground-state atom, terms associated with virtual-photon absorption contribute to the force which are identified as a signature of non-equilibrium dynamics. Even the equilibrium force on a thermalized atom or molecule may be overestimated when using the ground-state polarizability instead of its thermal counterpart.
We calculate the corrections to the Casimir force between two metals due to the spatial dispersion of their response functions. We employ model-independent expressions for the force in terms of the optical coefficients. We express the non-local corrections to the Fresnel coefficients employing the surface $d_\perp$ parameter, which accounts for the distribution of the surface screening charge. Within a self-consistent jellium calculation, spatial dispersion increases the Casimir force significatively for small separations. The nonlocal correction has the opposite sign than previously predicted…
The geometry dependence of Casimir forces is significantly more pronounced in the presence of thermal fluctuations due to a generic geometry-temperature interplay. We show that the thermal force for standard sphere-plate or cylinder-plate geometries develops a non-monotonic behavior already in the simple case of a fluctuating Dirichlet scalar. In particular, the attractive thermal force can increase for increasing distances below a critical temperature. This anomalous behavior is triggered by a reweighting of relevant fluctuations on the scale of the thermal wavelength. The essence of the phen…
Casimir Sign Reversal from Finite-Range Bogoliubov Fluctuations
Universidad San Sebastián（圣塞巴斯蒂安大学）；Centro de Estudios Científicos (CECs)（科学研究中心）；Instituto de Ciencias Físicas y Matemáticas, Universidad Austral de Chile（智利南方大学物理与数学科学研究所）；IPNP - Faculty of Mathematics and Physics, Charles University（查理大学数学与物理学院）；INFN, Sezione di Napoli（意大利国家核物理研究院那不勒斯分部）；Dipartimento di Matematica e Applicazioni “R. Caccioppoli,” Universitá di Napoli Federico II（那不勒斯费德里科二世大学应用数学系）
Based on a generalization of the Lifshiftz theory we calculate Casimir forces involving magnetodielectric and possibly anisotropic metamaterials, focusing on the possibility of repulsive forces. It is found that Casimir repulsion decreases with magnetic dissipation, and even a small Drude background in metallic-based metamaterials acts to make attractive a Casimir force that would otherwise be predicted to be repulsive. The sign of the force also depends sensitively on the degree of optical anisotropy of the metamaterial, and on the form of the frequency-dependency of the magnetic response.
We present systematic measurements of the Casimir force between a gold-coated plate and a sphere coated with a Hydrogen Switchable Mirror (HSM). HSMs are shiny metals that can become transparent by hydrogenation. In spite of such a dramatic change of the optical properties of the sphere, we did not observe any significant decrease of the Casimir force after filling the experimental apparatus with hydrogen. This counterintuitive result can be explained by the Lifshitz theory that describes the Casimir attraction between metallic and dielectric materials.
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive, but we present several counterexamples, notably a simple type of quantum graph in which the sign of the force depends upon the number of edges. We also show that Casimir forces in quantum graphs can be reliably computed by summing over the classical orbits, and study the rate of convergence of the periodic orbit expansion. In generic situations where no analytic expression is available, the sign and approximate magnitude…
We present the basic principles of non-local optics in connection with the calculation of the Casimir force between half-spaces and thin films. At currently accessible distances $L$, non-local corrections amount to about half a percent, but they increase roughly as 1/L at smaller separations. Self consistent models lead to corrections with the opposite sign as models with abrupt surfaces.
