A recent theoretical calculation shows that the Casimir force between two parallel plates can be repulsive for plates with nontrivial magnetic properties (O. Kenneth et al., Phys. Rev. Lett. 89, 033001 (2002)). According to the authors, the effect may be observed with known materials, such as ferrites and garnets, and it might be possible to engineer micro- or nanoelectromechanical systems (MEMS or NEMS) that could take advantage of a short range repulsive force. Here we show that on the contrary the Casimir force between two parallel plates in vacuum at micron and submicron distance is always attractive.
This manuscript has been withdrawn, since the authors have detected numerical inaccuracies that invalidate their main results concerning the existence of repulsive Casimir forces within a rectangular piston. Formulas presented in the manuscript keep still valid. The authors deeply apologize for this mistake.
The Casimir force for charge-neutral, perfect conductors of non-planar geometric configurations have been investigated. The configurations are: (1) the plate-hemisphere, (2) the hemisphere-hemisphere and (3) the spherical shell. The resulting Casimir forces for these physical arrangements have been found to be attractive. The repulsive Casimir force found by Boyer for a spherical shell is a special case requiring stringent material property of the sphere, as well as the specific boundary conditions for the wave modes inside and outside of the sphere. The necessary criteria in detecting Boyer's…
We investigate repulsive Casimir force between slabs containing left-handed materials with controllable electromagnetic properties. The sign of Casimir force is determined by the electric and magnetic properties of the materials, and it is shown that the formation of the repulsive force is related to the wave impedances of two slabs. The sign change of the Casimir force as a function of the distance is studied. Special emphasis is put on the restoring Casimir force which may be found to exist between perfectly conducting material and metamaterial slabs. This restoring force is a natural power …
We discuss the Casimir effect for boundary conditions involving perfect electromagnetic conductors (PEMCs). Based on the corresponding reciprocal Green's tensor we construct the Green's tensor for two perfectly reflecting plates with magnetoelectric coupling (non-reciprocal media) within the framework of macroscopic quantum electrodynamics. We calculate the Casimir force between two PEMC plates in terms of the PEMC parameter M and the duality transformation angle $θ$ resulting in a universal analytic expression that connects the attractive Casimir force with the repulsive Boyer force. We relat…
We study the Casimir force between a perfectly conducting and an infinitely permeable plate with the radiation pressure approach. This method illustrates how a repulsive force arises as a consequence of the redistribution of the vacuum-field modes corresponding to specific boundary conditions. We discuss also how the method of the zero-point radiation pressure follows from QED.
In 1948 H.B.G.Casimir predicted that an attractive force between two perfectly conducting neutral plates exists due to changes in the electromagnetic vacuum energy caused by the influence of the plates. In 1956 E.M. Lifshitz derived an extension of Casimir's expression applicable to finite temperatures and arbitrary dielectric constants for the two half-spaces and the gap in between them. It is shown in this brief report that, while the Lifshitz formula predicts an attractive force for the case of identical dielectric constants for the two half-spaces, a repulsive force results in some circums…
We apply the generalized zeta function method to compute the Casimir energy and pressure between an unusual pair of parallel plates at finite temperature, namely: a perfectly conducting plate and an infinitely permeable one. The high and low temperature limits of these quantities are discussed; relationships between high and low temperature limits are estabkished by means of a modified version of the temperature inversion symmetry.
The physical origin of the negative thermal correction to the Casimir force between metals is clarified. For this purpose the asymptotic behavior of the thermal Casimir force is analyzed at large and small distances in the real frequency representation. Contributions from propagating and evanescent waves are considered separately. At large distances they cancel each other in substantial degree so that only the attractive Lifshitz limit survives. At smaller separations the repulsive evanescent contribution of s-polarization dominates in the case of two metals or a metal and a high-permittivity …
Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, via a method to compute Casimir torques for finite objects. Furthermore, the stable orientation of the square cylinder is shown to undergo an unusual 45 degrees transition as a function of the separation…
We consider the interaction pressure acting on the surface of a dielectric sphere enclosed within a magnetodielectric cavity. We determine the sign of this quantity regardless of the geometry of the cavity for systems at thermal equilibrium, extending the Dzyaloshinskii-Lifshitz-Pitaevskii result for homogeneous slabs. As in previous theorems regarding Casimir-Lifshitz forces, the result is based on the scattering formalism. In this case the proof follows from the variable phase approach of electromagnetic scattering. With this, we present configurations in which both the interaction and the s…
Linear in temperature correction to the Casimir force is discussed. The correction is important for small separations between bodies tested in the recent experiments and disappears in the case of perfect conductors.
We reply to the "Comment on 'The Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic mirrors'" [arXiv:1604.06432]. We believe the comment misrepresents our papers, and fails to provide a plausible resolution to the conflict between theory and experiment.
We show that the claims expressed in the Comment arXiv:0810.3244v1 by R.S. Decca et al against our paper, D.A.R. Dalvit and S.K. Lamoreaux, Phys. Rev. Lett. {\bf 101}, 163203 (2008), are wrong and manifestly inconsistent with basic principles of statistical physics.
Like Casimir's original force between conducting plates in vacuum, Casimir forces are usually attractive. But repulsive Casimir forces can be achieved in special circumstances. These might prove useful in nanotechnology. We give examples of when repulsive quantum vacuum forces can arise with conducting materials.
We comment on a recently published measurement of the Casimir force for distances in the 0.6 to 6 micrometer range between two Au surfaces (Phys. Rev. Lett. 78, 5(1997)) and the net discrepancy reported for the comparison with theoretical predictions (Phys. Rev. Lett. 81, 5475 (1998)).
Achieving strong repulsive Casimir forces through engineered coatings can pave the way for micro- and nano-electromechanical applications where adhesive forces currently cause reliability issues. Here, we exploit Lifshitz theory to identify the requirements for repulsive Casimir forces in gyrotropic media for two limiting cases (ultra-strong gyroelectric and non-gyroelectric). We show that the origin of repulsive force in media with strong gyrotropy such as Weyl semi-metals arises from the giant interconversion of polarization of vacuum fluctuations.
Using numerical analytic continuation, we compute the Zeta function for the Casimir Effect for circular geometries in 2+1 dimensions. After subtraction of the simple pole of the zeta function, essentially MS renormalization, we find the Casimir force is repulsive. Implications for the stability of 2+1 dimensional domain walls and Axion membranes in 3+1 dimensions are discussed, especially in the context of strongly coupled underlying physics.
Recently D. A. R. Dalvit and S. K. Lamoreaux arXiv:0805.1676 [Phys. Rev. Lett. v.101, 163203 (2008)] suggested the modification of the reflection coefficients in the Lifshitz theory taking into account the screening effects and diffusion currents. We demonstrate that the suggested modification is thermodynamically and experimentally inconsistent.
We discuss repulsive Casimir forces between dielectric materials with non trivial magnetic susceptibility. It is shown that considerations based on naive pair-wise summation of Van der Waals and Casimir Polder forces may not only give an incorrect estimate of the magnitude of the total Casimir force, but even the wrong sign of the force when materials with high dielectric and magnetic response are involved. Indeed repulsive Casimir forces may be found in a large range of parameters, and we suggest that the effect may be realized in known materials. The phenomenon of repulsive Casimir forces ma…
We make remarks on Hoodbhoy's paper [J. Phys. A: Math. Gen. 38 (2005) 10253-10256] by pointing out the single plate considered could be elastic and there will be deformations once the net (one-sided) force being upon the plate which will change the position-dependent potential imposed by Hoodbhoy.
In a recent paper (M. Bostrom and Bo E. Sernelius, Phys. Rev. Lett. 84, 4757 (2000)) the combined effect of finite conductivity and finite temperature on the Casimir force is analyzed, and significant deviations from other theoretical results and a recent experiment are obtained. In this Comment, I show that the extrapolation to zero frequency is incorrect because the authors have neglected that the wavenumber and frequency of the electromagentic mode must simultaneously appraoch zero
We study the Casimir-Polder potential of a multilevel alkali-metal atom near an optical nanofiber. We calculate the mean potential of the atom in a fine-structure level. We perform numerical calculations for the Casimir-Polder potentials of the ground state and a few low-lying excited states of a rubidium atom. We show that, unlike the potential of the ground state, which is negative and attractive, the potential of a low-lying excited state may take positive values, oscillate around the zero value with a decaying amplitude, and become repulsive in some regions of atom-to-surface distances. We…
Based on a generalization of the Lifshiftz theory we calculate Casimir forces involving magnetodielectric and possibly anisotropic metamaterials, focusing on the possibility of repulsive forces. It is found that Casimir repulsion decreases with magnetic dissipation, and even a small Drude background in metallic-based metamaterials acts to make attractive a Casimir force that would otherwise be predicted to be repulsive. The sign of the force also depends sensitively on the degree of optical anisotropy of the metamaterial, and on the form of the frequency-dependency of the magnetic response.
The experimentally demonstration of Casimir force transition from attraction to repulsion is still challenging. Herein, the Casimir forces for a sphere above a plate immersed in different liquids were precisely measured using Atomic force microscope, and the long-range repulsive Casimir force in the gold-cyclohexane-PTFE system is observed for the first time. The experimental data are consistent with the calculation by Lifshitz theory, which offers the direct evidence for the system of ε1<ε3<ε2. It further verifies the reasonability of van Zwol et al. dielectric model to describe the interveni…
In this paper the Casimir energy of two parallel plates made by materials of different penetration depth and no medium in between is derived. We study the Casimir force density and derive analytical constraints on the two penetration depths which are sufficient conditions to ensure repulsion. Compared to other methods our approach needs no specific model for dielectric or magnetic material properties and constitutes a complementary analysis.
Weyl semimetals are a class of topological materials that exhibit a bulk Hall effect due to time-reversal symmetry breaking. We show that for the idealized semi-infinite case, the Casimir force between two identical Weyl semimetals is repulsive at short range and attractive at long range. Considering plates of finite thickness, we can reduce the size of the long-range attraction even making it repulsive for all distances when thin enough. In the thin-film limit, we study the appearance of an attractive Casimir force at shorter distances due to the longitudinal conductivity. Magnetic field, thi…
The Casimir interactions in the solid-liquid-solid systems as a function of separation distance have been studied by the Lifshitz theory. The dielectric permittivity functions for a wide range of materials are described by Drude, Drude-Lorentz and oscillator models. We find that the Casimir forces between gold and silica or MgO materials are both the repulsive and attractive. We also find the stable forms for the systems. Our studies would provide a good guidance for the future experimental studies on the dispersion interactions.
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive. We present three scenarios in which that is not true. Two of these depend on mixing two types of boundary conditions. The other, however, is a simple type of quantum graph in which the sign of the force depends upon the number of edges.
The Casimir repulsion between a metal and a dielectric suspended in a liquid has been thoroughly studied in recent experiments. In the present paper we consider surface modes in three layered systems modeled by dielectric functions guaranteeing repulsion. It is shown that surface modes play a decisive role in this phenomenon at short separations. For a toy plasma model we find the contribution of the surface modes at all distances.
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive, but we present several counterexamples, notably a simple type of quantum graph in which the sign of the force depends upon the number of edges. We also show that Casimir forces in quantum graphs can be reliably computed by summing over the classical orbits, and study the rate of convergence of the periodic orbit expansion. In generic situations where no analytic expression is available, the sign and approximate magnitude…
The Casimir force between two parallel plates separated by anisotropic media is investigated. We theoretically calculate the Casimir force between two parallel plates when the interspace between the plates is filled with anisotropic media. Our result shows that the anisotropy of the material between the plates can significantly affect the Casimir force, especially the direction of the force. If ignoring the anisotropy of the in-between material makes the force to be repulsive (attractive), by contrast, taking the anisotropy into account may produce an extra attractive (repulsive) force. The ph…
The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is shown to be incorrect.
We perform a theoretical analysis of a setup intended to measure the repulsive (outward) Casimir forces predicted to exist inside of perfectly conducting rectangular cavities. We consider the roles of the conductivity of the real metals, of the temperature and surface roughness. The use of this repulsive force to reduce friction and wear in micro and nanoelectromechanical systems (MEMS and NEMS) is also considered.
In a recent paper [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)] an electromagnetic energy-momentum tensor is suggested as an alternative to the Abraham-Minkowski tensor and is applied to calculations of Casimir forces in planar geometries. We argue that the universality of the suggested tensor is doubtful; application of the Raabe-Welsch theory to a simple example in classical electrodynamics shows that their proposed tensor is unable to describe the situation in a simple way. We also show that modified Casimir forces acting on the cavity medium as prescribed by these authors suf…
We present two novel models for repulsive Casimir interaction between positive perturbations. One example relies on non locality of the dielectric response and one relies on interference between (attractive) modes. Such examples are impossible to achieve in 1d massless theories, as they are prohibited by a generalization of the result of Lambrecht, Jaekel and Reynaud [Phys.Lett. A 225 (1997)] to non local dielectrics and to negative perturbations
The Casimir force between two parallel thick plates, one perfectly dielectric, the other purely magnetic, has been calculated long ago by Boyer [T. H. Boyer, Phys. Rev. A {\bf 9}, 2078 (1974)]. Its most characteristic property is that it is repulsive. The problem is actually delicate and counterintuitive, since it implies, for instance, that in the boundary layer of the electric plate the square $E^2$ of the electric field becomes a negative quantity. In the present paper we analyze the problem by first considering the simple harmonic oscillator model introduced by us earlier [J. S. Høye {\it …
We study the Casimir force in piston-like geometries semiclassically. The force on the piston is finite and physical, but to leading semiclassical approximation depends strongly on the shape of the surrounding cavity. Whereas this force is attractive for pistons in a parallelepiped with flat cylinder head, for which the semiclassical approximation by periodic orbits is exact, this approximation to the force on the piston vanishes for a semi-cylindrical head and becomes repulsive for a cylinder of circular cross section with a hemispherical head. In leading semiclassical approximation the sign …
Recently J.S. Hoye, I.Brevik, J.B. Aarseth, and K.A. Milton [Phys. Rev. E v.67, 056116 (2003); quant-ph/0212125] proposed that if the Lifshitz formula is combined with the Drude model, the transverse electric zero mode does not contribute to the result for real metals and there arises a linear temperature correction to the Casimir force at small temperatures. The authors claim that in spite of the fact that the Casimir entropy in their approach is negative, the Nernst heat theorem is satisfied. In the present Comment we show that the authors' conclusion regarding the Nernst heat theorem is in …
A 3D finite-element numerical simulation was developed to investigate Casimir forces in arbitrary geometries. The code was verified comparing it with results obtained from analytical equations. Appling the simulation to previously not assessed configurations, new Casimir properties were found such as repulsive Casimir forces in groove like structures.
We consider a perfectly conducting infinite cylinder with radius $R$, and investigate the Casimir-Polder (CP) and van der Waals (vdW) interactions with a neutral polarizable particle constrained to move in a plane distant $x_0>R$ from the axis of the cylinder. We show that when the relative curvature $x_0/R \lesssim 6.44$, this particle, under the action of the lateral CP force (which is the projection of the CP force onto the mentioned plane), is attracted to the point on the plane which is closest to the cylinder surface. On the other hand, when $x_0/R \gtrsim 6.44$, we also show that, for c…
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recently. It has also been known for many years that electrically and magnetically polarizable bodies can experience a repulsive quantum vacuum force. More amenable to practical application are situations wh…
Recently Guerout et al. [Phys. Rev. E, v.93, 022108 (2016)] advocated that the lossless plasma model has to be redefined as the limit of the Drude model when the relaxation parameter goes to zero. It was claimed that the previously used plasma model cannot correctly describe the Casimir pressure between two plates made of both nonmagnetic and magnetic metals and has to be replaced with the redefined one. We show that the suggested redefinition does not satisfy necessary physical requirements imposed on the dielectric permittivity. We also present a plausible explanation to the fact that the lo…
In a recent paper, Geyer, Klimchitskaya, and Mostepanenko [Phys. Rev. A 67, 062102 (2003); quant-ph/0306038] proposed the final solution of the problem of temperature correction to the Casimir force between real metals. The basic idea was that one cannot use the dielectric permittivity in the frequency region where a real current may arise leading to Joule heating of the metal. Instead, the surface impedance approach is proposed as a solution of all contradictions. The purpose of this comment is to show that (i) the main idea contradicts to the fluctuation dissipation theorem, (ii) the propose…
We study the influence of stationary axisymmetric spacetimes on Casimir energy. We consider a massive scalar field and analyze its dependence on the apparatus orientation with respect to the dragging direction associated with such spaces. We show that, for an apparatus orientation not considered before in the literature, the Casimir energy can change its sign, producing a repulsive force. As applications, we analyze two specific metrics: one associated with a linear motion of a cylinder and a circular equatorial motion around a gravitational source described by Kerr geometry.
Schlömilch's formula is generalized and applied to the thermal Casimir effect of a fermionic field confined a three-dimensional rectangular box. The analytic expressions of the Casimir energy and Casimir force are derived for arbitrary temperature and edge sizes. The low and high temperature limits and finite temperature cases are considered for the entire parameter space spanned by edge sizes and/or temperature. In the low temperature limit, it is found that for typical rectangular box, the effective 2-dimensional parameter space spanned by the two edge size ratios can be split into four regi…
We consider the interaction between a ZnO nanorod and a SiO2 nanorod in bromobenzene. Using optical data for the interacting objects and ambient we calculate the force - from short-range attractive van der Waals force to intermediate range repulsive Casimir-Lifshitz force to long range entropically driven attraction. The nonretarded van der Waals interaction is attractive at all separations. We demonstrate a retardation driven repulsion at intermediate separations. At short separations (in the nonretarded limit) and at large separations (in the classical limit) the interaction is attractive. T…
We theoretically predict that the Casimir force in vacuum between two Chern insulator plates can be repulsive (attractive) at long distances whenever the sign of the Chern numbers characterizing the two plates are opposite (equal). A unique feature of this system is that the sign of the force can be tuned simply by turning over one of the plates or alternatively by electrostatic doping. We calculate and take into account the full optical response of the plates and argue that such repulsion is a general phenomena for these systems as it relies on the quantized zero frequency Hall conductivity. …
We have reviewed the Comment of Geyer et al. [arXiv:0708.1548] concerning our recent work [Phys. Rev. A 75, 060102 (R) (2007)], and while we disagree with their criticisms, we acknowledge them for giving us the opportunity to add interesting addition material and a more detailed description of our experiment. We describe further our calculation and explain why a more sophisticated model is not warranted. We also present detailed experiments on the effects of electrostatic forces in our measurements and show that the contribution due to work function differences is small and that the residual e…
We calculated the force of the quantum vacuum, the Casimir force, in a spherically symmetric medium, Maxwell's fish eye, surrounded by a perfect mirror and derived an exact analytic solution. Our solution questions the idea that the Casimir force of a spherical mirror is repulsive - we found an attractive force that diverges at the mirror.
We study the possibility of obtaining a repulsive vacuum-induced force for a magnetic point particle near a surface. Considering the toy model of a particle with an electric-dipole transition and a large magnetic spin, we analyze the interplay between the repulsive magnetic-dipole and the attractive electric-dipole contributions to the total Casimir-Polder force. Particularly noting that the magnetic-dipole interaction is longer-ranged than the electric-dipole due to the difference in their respective characteristic transition frequencies, we find a regime where the repulsive magnetic contribu…
We investigate the Casimir-Polder force acting on a polarizable microparticle in the geometry of a straight cosmic string. In order to develop this analysis we evaluate the electromagnetic field Green tensor on the imaginary frequency axis. The expression for the Casimir-Polder force is derived in the general case of anisotropic polarizability. In dependence of the eigenvalues for the polarizability tensor and of the orientation of its principal axes, the Casimir-Polder force can be either repulsive or attractive. Moreover, there are situations where the force changes the sign with separation.…
We investigate the magnetic dipole coupling between a metallic surface and an atom in a thermal state, ground state and excited hyperine state. This interaction results in a repulsive correction and - unlike the electrical dipole contribution - depends sensitively on the Ohmic dissipation in the material.
We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive force increases dramatically. Beyond this, the force rapidly switches over to attraction as the separation decreases further to zero, in line with the proximity force approximation. We demonstrate that t…
We investigate the Casimir energy between two dissipative mirrors in term of a sum over mode formula which can be interpreted by analogy to a quantum dissipative oscillator. We also show that metamaterials engineered at scales between the nanometer and the micron seem a promising way to achieve a repulsive force.
