We present two novel models for repulsive Casimir interaction between positive perturbations. One example relies on non locality of the dielectric response and one relies on interference between (attractive) modes. Such examples are impossible to achieve in 1d massless theories, as they are prohibited by a generalization of the result of Lambrecht, Jaekel and Reynaud [Phys.Lett. A 225 (1997)] to non local dielectrics and to negative perturbations
We discuss repulsive Casimir forces between dielectric materials with non trivial magnetic susceptibility. It is shown that considerations based on naive pair-wise summation of Van der Waals and Casimir Polder forces may not only give an incorrect estimate of the magnitude of the total Casimir force, but even the wrong sign of the force when materials with high dielectric and magnetic response are involved. Indeed repulsive Casimir forces may be found in a large range of parameters, and we suggest that the effect may be realized in known materials. The phenomenon of repulsive Casimir forces ma…
Like Casimir's original force between conducting plates in vacuum, Casimir forces are usually attractive. But repulsive Casimir forces can be achieved in special circumstances. These might prove useful in nanotechnology. We give examples of when repulsive quantum vacuum forces can arise with conducting materials.
Using numerical analytic continuation, we compute the Zeta function for the Casimir Effect for circular geometries in 2+1 dimensions. After subtraction of the simple pole of the zeta function, essentially MS renormalization, we find the Casimir force is repulsive. Implications for the stability of 2+1 dimensional domain walls and Axion membranes in 3+1 dimensions are discussed, especially in the context of strongly coupled underlying physics.
The experimentally demonstration of Casimir force transition from attraction to repulsion is still challenging. Herein, the Casimir forces for a sphere above a plate immersed in different liquids were precisely measured using Atomic force microscope, and the long-range repulsive Casimir force in the gold-cyclohexane-PTFE system is observed for the first time. The experimental data are consistent with the calculation by Lifshitz theory, which offers the direct evidence for the system of ε1<ε3<ε2. It further verifies the reasonability of van Zwol et al. dielectric model to describe the interveni…
In this paper the Casimir energy of two parallel plates made by materials of different penetration depth and no medium in between is derived. We study the Casimir force density and derive analytical constraints on the two penetration depths which are sufficient conditions to ensure repulsion. Compared to other methods our approach needs no specific model for dielectric or magnetic material properties and constitutes a complementary analysis.
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive. We present three scenarios in which that is not true. Two of these depend on mixing two types of boundary conditions. The other, however, is a simple type of quantum graph in which the sign of the force depends upon the number of edges.
The infrared behavior of quantum field theories confined in bounded domains is strongly dependent on the shape and structure of space boundaries. The most significant physical effect arises in the behaviour of the vacuum energy. The Casimir energy can be attractive or repulsive depending on the nature of the boundary. We calculate the vacuum energy for a massless scalar field confined between two homogeneous parallel plates with the most general type of boundary conditions depending on four parameters. The analysis provides a powerful method to identify which boundary conditions generate attra…
This manuscript has been withdrawn, since the authors have detected numerical inaccuracies that invalidate their main results concerning the existence of repulsive Casimir forces within a rectangular piston. Formulas presented in the manuscript keep still valid. The authors deeply apologize for this mistake.
The Casimir force for charge-neutral, perfect conductors of non-planar geometric configurations have been investigated. The configurations are: (1) the plate-hemisphere, (2) the hemisphere-hemisphere and (3) the spherical shell. The resulting Casimir forces for these physical arrangements have been found to be attractive. The repulsive Casimir force found by Boyer for a spherical shell is a special case requiring stringent material property of the sphere, as well as the specific boundary conditions for the wave modes inside and outside of the sphere. The necessary criteria in detecting Boyer's…
We perform a theoretical analysis of a setup intended to measure the repulsive (outward) Casimir forces predicted to exist inside of perfectly conducting rectangular cavities. We consider the roles of the conductivity of the real metals, of the temperature and surface roughness. The use of this repulsive force to reduce friction and wear in micro and nanoelectromechanical systems (MEMS and NEMS) is also considered.
The Casimir repulsion between a metal and a dielectric suspended in a liquid has been thoroughly studied in recent experiments. In the present paper we consider surface modes in three layered systems modeled by dielectric functions guaranteeing repulsion. It is shown that surface modes play a decisive role in this phenomenon at short separations. For a toy plasma model we find the contribution of the surface modes at all distances.
Achieving strong repulsive Casimir forces through engineered coatings can pave the way for micro- and nano-electromechanical applications where adhesive forces currently cause reliability issues. Here, we exploit Lifshitz theory to identify the requirements for repulsive Casimir forces in gyrotropic media for two limiting cases (ultra-strong gyroelectric and non-gyroelectric). We show that the origin of repulsive force in media with strong gyrotropy such as Weyl semi-metals arises from the giant interconversion of polarization of vacuum fluctuations.
We investigate repulsive Casimir force between slabs containing left-handed materials with controllable electromagnetic properties. The sign of Casimir force is determined by the electric and magnetic properties of the materials, and it is shown that the formation of the repulsive force is related to the wave impedances of two slabs. The sign change of the Casimir force as a function of the distance is studied. Special emphasis is put on the restoring Casimir force which may be found to exist between perfectly conducting material and metamaterial slabs. This restoring force is a natural power …
A recent theoretical calculation shows that the Casimir force between two parallel plates can be repulsive for plates with nontrivial magnetic properties (O. Kenneth et al., Phys. Rev. Lett. 89, 033001 (2002)). According to the authors, the effect may be observed with known materials, such as ferrites and garnets, and it might be possible to engineer micro- or nanoelectromechanical systems (MEMS or NEMS) that could take advantage of a short range repulsive force. Here we show that on the contrary the Casimir force between two parallel plates in vacuum at micron and submicron distance is always…
We study the influence of stationary axisymmetric spacetimes on Casimir energy. We consider a massive scalar field and analyze its dependence on the apparatus orientation with respect to the dragging direction associated with such spaces. We show that, for an apparatus orientation not considered before in the literature, the Casimir energy can change its sign, producing a repulsive force. As applications, we analyze two specific metrics: one associated with a linear motion of a cylinder and a circular equatorial motion around a gravitational source described by Kerr geometry.
We discuss the Casimir effect for boundary conditions involving perfect electromagnetic conductors (PEMCs). Based on the corresponding reciprocal Green's tensor we construct the Green's tensor for two perfectly reflecting plates with magnetoelectric coupling (non-reciprocal media) within the framework of macroscopic quantum electrodynamics. We calculate the Casimir force between two PEMC plates in terms of the PEMC parameter M and the duality transformation angle $θ$ resulting in a universal analytic expression that connects the attractive Casimir force with the repulsive Boyer force. We relat…
We study the Casimir force between a perfectly conducting and an infinitely permeable plate with the radiation pressure approach. This method illustrates how a repulsive force arises as a consequence of the redistribution of the vacuum-field modes corresponding to specific boundary conditions. We discuss also how the method of the zero-point radiation pressure follows from QED.
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recently. It has also been known for many years that electrically and magnetically polarizable bodies can experience a repulsive quantum vacuum force. More amenable to practical application are situations wh…
In 1948 H.B.G.Casimir predicted that an attractive force between two perfectly conducting neutral plates exists due to changes in the electromagnetic vacuum energy caused by the influence of the plates. In 1956 E.M. Lifshitz derived an extension of Casimir's expression applicable to finite temperatures and arbitrary dielectric constants for the two half-spaces and the gap in between them. It is shown in this brief report that, while the Lifshitz formula predicts an attractive force for the case of identical dielectric constants for the two half-spaces, a repulsive force results in some circums…
We investigate the Casimir-Polder force acting on a polarizable microparticle in the geometry of a straight cosmic string. In order to develop this analysis we evaluate the electromagnetic field Green tensor on the imaginary frequency axis. The expression for the Casimir-Polder force is derived in the general case of anisotropic polarizability. In dependence of the eigenvalues for the polarizability tensor and of the orientation of its principal axes, the Casimir-Polder force can be either repulsive or attractive. Moreover, there are situations where the force changes the sign with separation.…
We consider the interaction between a ZnO nanorod and a SiO2 nanorod in bromobenzene. Using optical data for the interacting objects and ambient we calculate the force - from short-range attractive van der Waals force to intermediate range repulsive Casimir-Lifshitz force to long range entropically driven attraction. The nonretarded van der Waals interaction is attractive at all separations. We demonstrate a retardation driven repulsion at intermediate separations. At short separations (in the nonretarded limit) and at large separations (in the classical limit) the interaction is attractive. T…
Weyl semimetals are a class of topological materials that exhibit a bulk Hall effect due to time-reversal symmetry breaking. We show that for the idealized semi-infinite case, the Casimir force between two identical Weyl semimetals is repulsive at short range and attractive at long range. Considering plates of finite thickness, we can reduce the size of the long-range attraction even making it repulsive for all distances when thin enough. In the thin-film limit, we study the appearance of an attractive Casimir force at shorter distances due to the longitudinal conductivity. Magnetic field, thi…
We evaluate the Casimir energy and force for a massive scalar field with general curvature coupling parameter, subject to Robin boundary conditions on two codimension-one parallel plates, located on a $(D+1)$-dimensional background spacetime with an arbitrary internal space. The most general case of different Robin coefficients on the two separate plates is considered. With independence of the geometry of the internal space, the Casimir forces are seen to be attractive for special cases of Dirichlet or Neumann boundary conditions on both plates and repulsive for Dirichlet boundary conditions o…
The Casimir interactions in the solid-liquid-solid systems as a function of separation distance have been studied by the Lifshitz theory. The dielectric permittivity functions for a wide range of materials are described by Drude, Drude-Lorentz and oscillator models. We find that the Casimir forces between gold and silica or MgO materials are both the repulsive and attractive. We also find the stable forms for the systems. Our studies would provide a good guidance for the future experimental studies on the dispersion interactions.
We apply the generalized zeta function method to compute the Casimir energy and pressure between an unusual pair of parallel plates at finite temperature, namely: a perfectly conducting plate and an infinitely permeable one. The high and low temperature limits of these quantities are discussed; relationships between high and low temperature limits are estabkished by means of a modified version of the temperature inversion symmetry.
The physical origin of the negative thermal correction to the Casimir force between metals is clarified. For this purpose the asymptotic behavior of the thermal Casimir force is analyzed at large and small distances in the real frequency representation. Contributions from propagating and evanescent waves are considered separately. At large distances they cancel each other in substantial degree so that only the attractive Lifshitz limit survives. At smaller separations the repulsive evanescent contribution of s-polarization dominates in the case of two metals or a metal and a high-permittivity …
Mainly on nano-scale, but maybe not exclusively, it can be imagined a spontaneous charge disjunction inside certain media due to the fluctuations, collisions, wall effects, radiation or/and other presently unknown interactions. The repulsive Casimir-Lifshitz force may be also a good candidate as a source of this kind of phenomenon. To cover this assumption mathematically an additional term should appear in the Maxwell equations. As a consequence of this term, similar Klein-Gordon equations with a negative mass term will be obtained for the electric and magnetic fields. These equations may have…
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive, but we present several counterexamples, notably a simple type of quantum graph in which the sign of the force depends upon the number of edges. We also show that Casimir forces in quantum graphs can be reliably computed by summing over the classical orbits, and study the rate of convergence of the periodic orbit expansion. In generic situations where no analytic expression is available, the sign and approximate magnitude…
Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, via a method to compute Casimir torques for finite objects. Furthermore, the stable orientation of the square cylinder is shown to undergo an unusual 45 degrees transition as a function of the separation…
We consider the interaction pressure acting on the surface of a dielectric sphere enclosed within a magnetodielectric cavity. We determine the sign of this quantity regardless of the geometry of the cavity for systems at thermal equilibrium, extending the Dzyaloshinskii-Lifshitz-Pitaevskii result for homogeneous slabs. As in previous theorems regarding Casimir-Lifshitz forces, the result is based on the scattering formalism. In this case the proof follows from the variable phase approach of electromagnetic scattering. With this, we present configurations in which both the interaction and the s…
We study the Casimir force in piston-like geometries semiclassically. The force on the piston is finite and physical, but to leading semiclassical approximation depends strongly on the shape of the surrounding cavity. Whereas this force is attractive for pistons in a parallelepiped with flat cylinder head, for which the semiclassical approximation by periodic orbits is exact, this approximation to the force on the piston vanishes for a semi-cylindrical head and becomes repulsive for a cylinder of circular cross section with a hemispherical head. In leading semiclassical approximation the sign …
Casimir forces are a manifestation of the change in the zero-point energy of the vacuum caused by the insertion of boundaries. We show how the Casimir force can be computed by consideration of the vacuum fluctuations that are suppressed by the boundaries, and rederive the scalar Casimir effects for a series of geometries. For the planar case a finite universal force is automatically found. For curved geometries formally divergent expressions are encountered which we argue are largely due to the divergent self-energy of the boundary contributing to the force. This idea is supported by computing…
This Resource Letter provides a guide to the literature on van der Waals and Casimir-Polder forces. Journal articles, books, and other documents are cited on the following topics: van der Waals forces, retarded dispersion forces or Casimir-Polder forces between atoms or molecules, Casimir-Polder forces between a molecule and a dielectric or conducting body, the summation of Casimir-Polder forces as leading to the Casimir and Lifshitz forces between conducting and dielectric bodies, Casimir friction, applications to nanotechnology, the nature of the quantum vacuum, and experimental tests of the…
We theoretically predict that the Casimir force in vacuum between two Chern insulator plates can be repulsive (attractive) at long distances whenever the sign of the Chern numbers characterizing the two plates are opposite (equal). A unique feature of this system is that the sign of the force can be tuned simply by turning over one of the plates or alternatively by electrostatic doping. We calculate and take into account the full optical response of the plates and argue that such repulsion is a general phenomena for these systems as it relies on the quantized zero frequency Hall conductivity. …
The Casimir energy, free energy and Casimir force are evaluated, at arbitrary finite temperature, for a dilute dielectric ball with uniform velocity of light inside the ball and in the surrounding medium. In particular, we investigate the classical limit at high temperature. The Casimir force found is repulsive, as in previous calculations.
We study the Casimir effect in axion electrodynamics. A finite $θ$-term affects the energy dispersion relation of photon if $θ$ is time and/or space dependent. We focus on a special case with linearly inhomogeneous $θ$ along the $z$-axis. Then we demonstrate that the Casimir force between two parallel plates perpendicular to the $z$-axis can be either attractive or repulsive, dependent on the gradient of $θ$. We call this repulsive component in the Casimir force induced by inhomogeneous $θ$ the anomalous Casimir effect.
We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable levitation, as the particle is unstable to displacements away from the symmetry axis.
A novel approach for calculating Casimir forces between periodically deformed objects is developed. This approach allows, for the first time, a rigorous non-perturbative treatment of the Casimir effect for disconnected objects beyond Casimir's original two-plate configuration. The approach takes into account the collective nature of fluctuation induced forces, going beyond the commonly used pairwise summation of two-body van der Waals forces. As an application of the method, we exactly calculate the Casimir force due to scalar field fluctuations between a flat and a rectangular corrugated plat…
We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clusters) of compact objects, which we illustrate via a "molecular" two-sphere dicluster geometry consiting of two bound spheres levitated above a gold slab. Our calculations also reveal a strong interplay…
We use the extended Lifshitz theory to study the behaviors of the Casimir forces between finite-thickness effective medium slabs. We first study the interaction between a semi-infinite Drude metal and a finite-thickness magnetic slab with or without substrate. For no substrate, the large distance $d$ dependence of the force is repulsive and goes as $1/d^5$; for the Drude metal substrate, a stable equilibrium point appears at an intermediate distance which can be tuned by the thickness of the slab. We then study the interaction between two identical chiral metamaterial slabs with and without su…
We study the Casimir-Polder potential of a multilevel alkali-metal atom near an optical nanofiber. We calculate the mean potential of the atom in a fine-structure level. We perform numerical calculations for the Casimir-Polder potentials of the ground state and a few low-lying excited states of a rubidium atom. We show that, unlike the potential of the ground state, which is negative and attractive, the potential of a low-lying excited state may take positive values, oscillate around the zero value with a decaying amplitude, and become repulsive in some regions of atom-to-surface distances. We…
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
Based on a generalization of the Lifshiftz theory we calculate Casimir forces involving magnetodielectric and possibly anisotropic metamaterials, focusing on the possibility of repulsive forces. It is found that Casimir repulsion decreases with magnetic dissipation, and even a small Drude background in metallic-based metamaterials acts to make attractive a Casimir force that would otherwise be predicted to be repulsive. The sign of the force also depends sensitively on the degree of optical anisotropy of the metamaterial, and on the form of the frequency-dependency of the magnetic response.
We study the Casimir force acting on a conducting piston with arbitrary cross section. We find the exact solution for a rectangular cross section and the first three terms in the asymptotic expansion for small height to width ratio when the cross section is arbitrary. Though weakened by the presence of the walls, the Casimir force turns out to be always attractive. Claims of repulsive Casimir forces for related configurations, like the cube, are invalidated by cutoff dependence.
We derive upper and lower bounds on the Casimir--Polder force between an anisotropic dipolar body and a macroscopic body separated by vacuum via algebraic properties of Maxwell's equations. These bounds require only a coarse characterization of the system---the material composition of the macroscopic object, the polarizability of the dipole, and any convenient partition between the two objects---to encompass all structuring possibilities. We find that the attractive Casimir--Polder force between a polarizable dipole and a uniform planar semi-infinite bulk medium always comes within 10% of the …
We critically review the possibilities of a repulsive Casimir interaction between materials which carry Chern-Simons surface actions for the electromagnetic field.
In this work we consider a fermionic chain of finite length $\ell$. Fermions are allowed to interact and are forced to obey boundary conditions, thus altering the process of condensation. Our goal is to explore how this affects the quantum vacuum energy for this system. We approach this problem by using a self-consistent method and observe a nontrivial behavior in the Casimir force, displaying a switch from an attractive to a repulsive regime. This flip stems from the competition between the attractive contribution from the usual fermionic Casimir effect and a repulsive one coming from the con…
Various applications of the multiple scattering technique to calculating Casimir energy are described. These include the interaction between dilute bodies of various sizes and shapes, temperature dependence, interactions with multilayered and corrugated bodies, and new examples of exactly solvable separable bodies.
We demonstrate that the thermal Casimir-Polder forces on molecules near a conducting surface whose transition wavelengths are comparable to the molecule-surface separation are dependent on the ambient temperature and molecular polarization and they can even be changed from attractive to repulsive via varying the temperature across a threshold value for anisotropically polarizable molecules. Remarkably, this attractive-to-repulsive transition may be realized at room temperature. Let us note that the predicted repulsion is essentially a nonequilibrium effect since the force we calculated on a gr…
The Casimir force between two parallel plates separated by anisotropic media is investigated. We theoretically calculate the Casimir force between two parallel plates when the interspace between the plates is filled with anisotropic media. Our result shows that the anisotropy of the material between the plates can significantly affect the Casimir force, especially the direction of the force. If ignoring the anisotropy of the in-between material makes the force to be repulsive (attractive), by contrast, taking the anisotropy into account may produce an extra attractive (repulsive) force. The ph…
In this paper the quantum vacuum energies induced by massive fluctuations of one real scalar field on a configuration of two partially transparent plates are analysed. The physical properties of the infinitely thin plates are characterized by two Dirac-$δ$ potentials. We find that an attractive/repulsive Casimir force arises between the plates when the weights of the $δ$'s have equal/different sign. If some of the plates absorbs fluctuations below some threshold of energy (the corresponding weight is negative) there is the need to set a minimum mass to the scalar field fluctuations to preserve…
We consider the finite temperature Casimir force acting on two parallel plates in a closed cylinder with the same cross section of arbitrary shape in the presence of extra dimensions. Dirichlet boundary conditions are imposed on one plate and fractional Neumann conditions with order between zero (Dirichlet) and one (Neumann) are imposed on the other plate. Formulas for the Casimir force show that it is always attractive for Dirichlet boundary conditions, and is always repulsive when the fractional order is larger than 1/2. For some fractional orders less than 1/2, the Casimir force can be eith…
The Casimir force between two parallel thick plates, one perfectly dielectric, the other purely magnetic, has been calculated long ago by Boyer [T. H. Boyer, Phys. Rev. A {\bf 9}, 2078 (1974)]. Its most characteristic property is that it is repulsive. The problem is actually delicate and counterintuitive, since it implies, for instance, that in the boundary layer of the electric plate the square $E^2$ of the electric field becomes a negative quantity. In the present paper we analyze the problem by first considering the simple harmonic oscillator model introduced by us earlier [J. S. Høye {\it …
In a recent letter, Martin and Zagrebnov [Europhys. Lett., 73 (2006) 1] discussed the thermodynamic Casimir effect for the ideal Bose gas confined in a thin film. We point out that their findings can be expressed in terms of previous general results for the Casimir effect induced by confined critical fluctuations. This highlights the links between the Casimir effect in the contexts of critical phenomena and Bose-Einstein condensation.
We measured the gradient of the Casimir force between an Au sphere and a plate made of ferromagnetic metal (Ni). It is demonstrated that the magnetic properties influence the force magnitude. This opens prospective opportunities for the control of the Casimir force in nanotechnology and for obtaining Casimir repulsion by using ferromagnetic dielectrics.
The thermal Casimir-Lifshitz force among two bodies held at different temperatures displays striking features that are absent in systems in thermal equilibrium. The manifestation of this force has been observed so far only in Bose-Einstein condensates close to a heated substrate, but never between two macroscopic bodies. Observation of the thermal Casimir-Lifhitz force out of thermal equilibrium with conventional Casimir setups is very difficult, because for experimentally accessible separations the thermal force is small compared to the zero-temperature quantum Casimir force, unless prohibiti…
Isoelectronic differential force measurements provide a unique opportunity to probe controversial features of the thermal Casimir effect, that are still much debated in the current literature. Isolectronic setups offer two major advantages over conventional Casimir setups. On one hand they are immune from electrostatic forces caused by potential patches on the plates surfaces, that plague present Casimir experiments especially for separations in the micron range. On the other hand they can strongly enhance the discrepancy between alternative theoretical models that have been proposed to estima…
