We discuss new approaches to compute numerically the Casimir interaction energy for waveguides of arbitrary section, based on the boundary methods traditionally used to compute eigenvalues of the 2D Helmholtz equation. These methods are combined with the Cauchy's theorem in order to perform the sum over modes. As an illustration, we describe a point-matching technique to compute the vacuum energy for waveguides containing media with different permittivities. We present explicit numerical evaluations for perfect conducting surfaces in the case of concentric corrugated cylinders and a circular cylinder inside an elliptic one.
We present explicitly another example of a temperature inversion symmetry in the Casimir effect for a nonsymmetric boundary condition. We also give an interpretation for our result.
We consider vacuum fluctuations of the quantum electromagnetic field in the presence of an infinite and perfectly conducting plate. We evaluate how the change of vacuum fluctuations due to the plate modifies the Casimir-Polder potential between two atoms placed near the plate. We use two different methods to evaluate the Casimir-Polder potential in the presence of the plate. They also give new insights on the role of boundary conditions in the Casimir-Polder interatomic potential, as well as indications for possible generalizations to more complicated boundary conditions.
We find the lateral projection of the Casimir force for a configuration of a sphere above a corrugated plate. This force tends to change the sphere position in the direction of a nearest corrugation maximum. The probability distribution describing different positions of a sphere above a corrugated plate is suggested which is fitted well with experimental data demonstrating the nontrivial boundary dependence of the Casimir force.
Quantities associated with Casimir forces are calculated in a model wave system of one spatial dimension with Dirichlet or Neumann boundary conditions. 1)Due to zero-point fluctuations, a partition is attracted to the walls of a box if the wave boundary conditions are alike for the partition and the walls, but is repelled if the conditions are different. 2)The use of Casimir energies in the presence of zero-point radiation introduces a natural maximum-entropy principle which is satisfied only by the Planck spectrum for both like and unlike boundary conditions between the box and partition. 3)T…
Recent progress in the simulation of Casimir forces between various objects has allowed traditional computational electromagnetic solvers to be used to find Casimir forces in arbitrary three-dimensional objects. The underlying theory to these approaches requires knowledge and manipulation of quantum field theory and statistical physics. We present a calculation of the Casimir force using the method of moments via the argument principle. This simplified derivation allows greater freedom in the moment matrix where the argument principle can be used to calculate Casimir forces for arbitrary geome…
The moving-mirror problem is microscopically formulated without invoking the external boundary conditions. The moving mirrors are described by the quantized matter field interacting with the photon field, forming dynamical cavity polaritons: photons in the cavity are dressed by electrons in the moving mirrors. The effective Hamiltonian for the polariton is derived, and corrections to the results based on the external boundary conditions are discussed.
We evaluate the Casimir-Polder potential between two atoms in the presence of an infinite perfectly conducting plate and at nonzero temperature. In order to calculate the potential, we use a method based on equal-time spatial correlations of the electric field, already used to evaluate the effect of boundary conditions on interatomic potentials. This method gives also a transparent physical picture of the role of a finite temperature and boundary conditions on the Casimir-Polder potential. We obtain an analytical expression of the potential both in the near and far zones, and consider several …
We analyze the dynamical Casimir effect for a massless scalar field confined between two concentric spherical shells which impose on the field mixed boundary conditions. We thus complement a previous result [Phys. Rev. A \textbf{78}, 032521 (2008)], where the same problem was considered but in that case the field was submitted to a Dirichlet boundary condition in both moving spherical shells. A general expression for the average number of created particles is deduced for an arbitrary law of radial motion of the spherical shells. This expression is then applied to harmonic oscillations of the s…
We present the basic ingredients of a technique to compute quantum Casimir forces at micrometer scales using antenna measurements at tabletop, e.g. centimeter, scales, forming a type of analog computer for the Casimir force. This technique relies on a correspondence that we derive between the contour integration of the Casimir force in the complex frequency plane and the electromagnetic response of a physical dissipative medium in a finite, real frequency bandwidth.
We give a short review on the static and dynamical Casimir effects, recalling their historical prediction, as well as their more recent experimental verification. We emphasise on the central role played by so-called {\it dynamical boundary conditions} (for which the boundary condition depends on a second time derivative of the field) in the experimental verification of the dynamical Casimir effect by Wilson et al. We then go on to review our previous work on the static Casimir effect with dynamical boundary conditions, providing an overview on how to compute the so-called local Casimir energy,…
We compute the Casimir Energy of a spherical region using a Surface Impedance approach. We characterize the Surface Impedance of the boundary using plasma model. Exact analytical formulae are obtained by means of the zeta function regularization method and all the divergencies are explicitly computed. We find that it is possible to have negative Casimir energy for some range of values of the relevant parameter. Limits of applicability of the model are discussed.
We review different aspects of the atom-atom and atom-wall Casimir-Polder forces. We first discuss the role of a boundary condition on the interatomic Casimir-Polder potential between two ground-state atoms, and give a physically transparent interpretation of the results in terms of vacuum fluctuations and image atomic dipoles. We then discuss the known atom-wall Casimir-Polder force for ground- and excited-state atoms, using a different method which is also suited for extension to time-dependent situations. Finally, we consider the fluctuation of the Casimir-Polder force between a ground-stat…
We derive modified reflection coefficients for electromagnetic waves in the THz and far infrared range. The idea is based on hydrodynamic boundary conditions for metallic conduction electrons. The temperature-dependent part of the Casimir pressure between metal plates is evaluated. The results should shed light on the "thermal anomaly" where measurements deviate from the standard fluctuation electrodynamics for conducting metals.
We provide a review of both new experimental and theoretical developments in the Casimir effect. The Casimir effect results from the alteration by the boundaries of the zero-point electromagnetic energy. Unique to the Casimir force is its strong dependence on shape, switching from attractive to repulsive as function of the size, geometry and topology of the boundary. Thus the Casimir force is a direct manifestation of the boundary dependence of quantum vacuum. We discuss in depth the general structure of the infinities in the field theory which are removed by a combination of zeta-functional r…
In this work we investigate the dynamical Casimir effect in a nonideal cavity by deriving an effective Hamiltonian. We first compute a general expression for the average number of particle creation, applicable for any law of motion of the cavity boundary. We also compute a general expression for the linear entropy of an arbitrary state prepared in a selected mode, also applicable for any law of motion of the cavity boundary. As an application of our results we have analyzed both the average number of particle creation and linear entropy within a particular oscillatory motion of the cavity boun…
The effect of edges and apertures on the Casimir energy of an arrangement of plates and boundaries can be calculated in terms of an effective nonlocal lower-dimensional field theory that lives on the boundary. This formalism has been developed in a number of previous papers and applied to specific examples with Dirichlet boundary conditions. Here we generalize the formalism to arbitrary boundary conditions. As a specific example, the geometry of a flat plate and a half-plate placed parallel to it is considered for a number of different boundary conditions and the area-dependent and edge depend…
We develop an exact method for computing the Casimir energy between arbitrary compact objects, both with boundary conditions for a scalar field and dielectrics or perfect conductors for the electromagnetic field. The energy is obtained as an interaction between multipoles, generated by quantum source or current fluctuations. The objects' shape and composition enter only through their scattering matrices. The result is exact when all multipoles are included, and converges rapidly. A low frequency expansion yields the energy as a series in the ratio of the objects' size to their separation. As e…
When one studies the Casimir effect, the periodic (anti-periodic) boundary condition is usually taken to mimic a periodic (anti-periodic) structure for a scalar field living in a flat space with a non-Euclidean topology. However, there could be an arbitrary phase difference between the value of the scalar field on one endpoint of the unit structure and that on the other endpoint, such as the structure of nanotubes. Then, in this paper, a periodic condition on the ends of the system with an additional phase factor, which is called the ``quasi-periodic" condition, is imposed to investigate the c…
A diffraction problem for a flat Chern-Simons layer at plane boundary of a dielectric half space is solved. The Casimir energy of two dielectric half spaces with Chern-Simons layers at plane-parallel boundaries separated by a vacuum slit is derived. Crossing from the repulsive to the attractive Casimir force is analyzed for two Au and two Si half spaces with boundary Chern-Simons layers. Boundary quantum Hall layers in external magnetic field lead to Casimir repulsion at nanoscales. We discuss features that make systems with boundary quantum Hall layers unique for force measurements and search…
In this paper, we consider the fermionic Casimir effect under a new type of space-time topology using the concept of quotient topology. The relation between the new topology and that in Ref. \cite{Feng,Zhai3} is something like that between a Möbius strip and a cylindric. We obtain the exact results of the Casimir energy and force for the massless and massive Dirac fields in the ($D+1$)-dimensional space-time. For both massless and massive cases, there is a $Z_2$ symmetry for the Casimir energy. To see the effect of the mass, we compare the result with that of the massless one and we found that…
Casimir effect in the planar setting is described using the boundary state formalism, for general partially reflecting boundaries. It is expressed in terms of the low-energy degrees of freedom, which provides a large distance expansion valid for general interacting field theories provided there is a non-vanishing mass gap. The expansion is written in terms of the scattering amplitudes, and needs no ultraviolet renormalization. We also discuss the case when the quantum field has a nontrivial vacuum configuration.
We study a coupled system that describes the interacting dynamics between a bulk field, confined to a finite region with timelike boundary, and a boundary observable. In our system the dynamics of the boundary observable prescribes dynamical boundary conditions for the bulk field. We cast our classical system in the form of an abstract linear Klein-Gordon equation, in an enlarged Hilbert space for the bulk field and the boundary observable. This makes it possible to apply to our coupled system the general methods of quantization. In particular, we implement the Fock quantization in full detail…
The infrared behavior of quantum field theories confined in bounded domains is strongly dependent on the shape and structure of space boundaries. The most significant physical effect arises in the behaviour of the vacuum energy. The Casimir energy can be attractive or repulsive depending on the nature of the boundary. We calculate the vacuum energy for a massless scalar field confined between two homogeneous parallel plates with the most general type of boundary conditions depending on four parameters. The analysis provides a powerful method to identify which boundary conditions generate attra…
The Casimir force between two perfectly reflecting parallel plates is considered. In a recent paper we presented generalised physical boundary conditions describing perfectly reflecting parallel plates. These boundary conditions are applicable to a field possessing any spin, and include the well-known spin-1/2 and spin-1 boundary conditions as special cases. Here we use these general boundary conditions to show that the allowed values of energy-momentum turn out to be the same for any massless fermionic field and the same for any massless bosonic field. As a result one expects to obtain only t…
We evaluate the Casimir energy and force for a massive scalar field with general curvature coupling parameter, subject to Robin boundary conditions on two codimension-one parallel plates, located on a $(D+1)$-dimensional background spacetime with an arbitrary internal space. The most general case of different Robin coefficients on the two separate plates is considered. With independence of the geometry of the internal space, the Casimir forces are seen to be attractive for special cases of Dirichlet or Neumann boundary conditions on both plates and repulsive for Dirichlet boundary conditions o…
Motivated by experiments in which moving boundaries are simulated by time-dependent properties of static systems, we discuss the model of a massless scalar field submitted to a time-dependent Robin boundary condition (BC) at a static mirror in 1+1 dimensions. Using a perturbative approach, we compute the spectral distribution of the created particles and the total particle creation rate, considering a thermal state as the initial field state.
Although Casimir, or quantum vacuum, forces between distinct bodies, or self-stresses of individual bodies, have been calculated by a variety of different methods since 1948, they have always been plagued by divergences. Some of these divergences are associated with the volume, and so may be more or less unambiguously removed, while other divergences are associated with the surface. The interpretation of these has been quite controversial. Particularly mysterious is the contradiction between finite total self-energies and surface divergences in the local energy density. In this paper we clarif…
We study the Casimir effect for scalar fields with general curvature coupling subject to mixed boundary conditions $(1+β_{m}n^μ\partial_μ)ϕ=0$ at $x=a_{m}$ on one ($m=1$) and two ($m=1,2$) parallel plates at a distance $a\equiv a_{2}-a_{1}$ from each other. Making use of the generalized Abel-Plana formula previously established by one of the authors \cite{Sahrev}, the Casimir energy densities are obtained as functions of $β_{1}$ and of $β_{1}$,$β_{2}$,$a$, respectively. In the case of two parallel plates, a decomposition of the total Casimir energy into volumic and superficial contributions is…
In this paper we describe an approach to Casimir Force problems that is ultimately generalizable to all fields, boundary conditions, and cavity geometries. This approach utilizes locally defined reflection amplitudes to express the energy per unit area of any Casimir interaction. To demonstrate this approach we solve a number of Casimir Force problems including the case of uniaxial boundary conditions in a parallel-plate cavity.
In this work we study the Casimir effect for massless scalar fields propagating in a piston geometry of the type $I\times N$ where $I$ is an interval of the real line and $N$ is a smooth compact Riemannian manifold. Our analysis represents a generalization of previous results obtained for pistons configurations as we consider all possible boundary conditions that are allowed to be imposed on the scalar fields. We employ the spectral zeta function formalism in the framework of scattering theory in order to obtain an expression for the Casimir energy and the corresponding Casimir force on the pi…
Dirichlet boundary conditions on a surface can be imposed on a scalar field, by coupling it quadratically to a $δ$-like potential, the strength of which tends to infinity. Neumann conditions, on the other hand, require the introduction of an even more singular term, which renders the reflection and transmission coefficients ill-defined because of UV divergences. We present a possible procedure to tame those divergences, by introducing a minimum length scale, related to the non-zero `width' of a {\em nonlocal} term. We then use this setup to reach (either exact or imperfect) Neumann conditions,…
We consider a real massless scalar field in 3+1 dimensions satisfying a Robin boundary condition at a nonrelativistic moving mirror. Considering vacuum as the initial field state, we compute explicitly the number of particles created per unit frequency and per unit solid angle, exhibiting in this way the angular dependence of the spectral distribution. The well known cases of Dirichlet and Neumann boundary conditions may be reobtained as particular cases from our results. We show that the particle creation rate can be considerably reduced (with respect to the Dirichlet and Neumann cases) for p…
We derive the radiation pressure force on a non-relativistic moving plate in 1+1 dimensions. We assume that a massless scalar field satisfies either Dirichlet or Neumann boundary conditions (BC) at the instantaneous position of the plate. We show that when the state of the field is invariant under time translations, the results derived for Dirichlet and Neumann BC are equal. We discuss the force for a thermal field state as an example for this case. On the other hand, a coherent state introduces a phase reference, and the two types of BC lead to different results.
We introduce a general, simple and effective method of evaluating the zero point energy of a quantum field under the influence of arbitrary boundary conditions imposed on the field on flat surfaces perpendicular to a chosen spatial direction. As an example we apply the method to the Casimir effect associated with a massive fermion field on which MIT bag model type of boundary conditions are imposed.
The Casimir effect results from alterations of the zero-point electromagnetic energy introduced by boundary-conditions. For ferromagnetic layers separated by vacuum (or a dielectric) such boundary-conditions are influenced by the magneto-optical Kerr effect. We will show that this gives rise to a long-range magnetic interaction and discuss the effect for two different configurations (magnetization parallel and perpendicular to the layers). Analytical expressions are derived for two models and compared to numerical calculations. Numerical calculations of the effect for Fe are also presented and…
Casimir forces are conventionally computed by analyzing the effects of boundary conditions on a fluctuating quantum field. Although this analysis provides a clean and calculationally tractable idealization, it does not always accurately capture the characteristics of real materials, which cannot constrain the modes of the fluctuating field at all energies. We study the vacuum polarization energy of renormalizable, continuum quantum field theory in the presence of a background field, designed to impose a Dirichlet boundary condition in a particular limit. We show that in two and three space dim…
In this paper we discuss the computation of Casimir energy on a quantum computer. The Casimir energy is an ideal quantity to calculate on a quantum computer as near term hybrid classical quantum algorithms exist to calculate the ground state energy and the Casimir energy gives physical implications for this quantity in a variety of settings. Depending on boundary conditions and whether the field is bosonic or fermionic we illustrate how the Casimir energy calculation can be set up on a quantum computer and calculated using the Variational Quantum Eigensolver algorithm with IBM QISKit. We compa…
We study analytically the time-dependent boundary conditions of superconducting microwave circuit experiments in the high plasma frequency limit, in which the conditions are Robin-type and relate the value of the field to the spatial derivative of the field. We give an explicit solution to the field evolution for boundary condition modulations that are small in magnitude but may have arbitrary time dependence, in a formalism that applies both to a semiopen waveguide and to a closed waveguide with two independently adjustable boundaries. The correspondence between the microwave Robin boundary c…
In this paper we study the system of a scalar quantum field confined between two plane, isotropic, and homogeneous parallel plates at thermal equilibrium. We represent the plates by the most general lossless and frequency-independent boundary conditions that satisfy the conditions of isotropy and homogeneity and are compatible with the unitarity of the quantum field theory. Under these conditions we compute the thermal correction to the quantum vacuum energy as a function of the temperature and the parameters encoding the boundary condition. The latter enables us to obtain similar results for …
For scalar and electromagnetic fields we evaluate the vacuum expectation value of the energy-momentum tensor induced by a curved boundary in the Robertson--Walker spacetime with negative spatial curvature. In order to generate the vacuum densities we use the conformal relation between the Robertson-Walker and Rindler spacetimes and the corresponding results for a plate moving by uniform proper acceleration through the Fulling--Rindler vacuum. For the general case of the scale factor the vacuum energy-momentum tensor is presented as the sum of the boundary free and boundary induced parts.
In the present paper we investigate thermal fluctuation corrections to the vacuum energy at zero temperature of a conformally coupled massless scalar field whose modes propagate in the Einstein universe with a spherical boundary, characterized by both Dirichlet and Neumann boundary conditions. Thus, we generalize the results found in literature in this scenario, which has considered only the vacuum energy at zero temperature. To do this, we use the generalized zeta function method plus Abel-Plana formula and calculate the renormalized Casimir free energy as well as other thermodynamics quantit…
We obtain new expressions for the Casimir energy between plates that are mimicked by the most general possible boundary conditions allowed by the principles of quantum field theory. This result enables to provide the quantum vacuum energy for scalar fields propagating under the influence of a one-dimensional crystal represented by a periodic potential formed by an infinite array of identical potentials with compact support.
Analytic expressions that describe Casimir interactions over the entire range of separations have been limited to planar surfaces. Here we derive analytic expressions for the classical or high-temperature limit of Casimir interactions between two spheres (interior and exterior configurations), including the sphere-plane geometry as a special case, using bispherical coordinates. We consider both Dirichlet boundary conditions and metallic boundary conditions described by the Drude model. At short distances, closed-form expansions are derived from the exact result, displaying an intricate structu…
We study the geometry dependence of the Casimir energy for deformed metal plates by a path integral quantization of the electromagnetic field. For the first time, we give a complete analytical result for the deformation induced change in Casimir energy δ\cal E in an experimentally testable, nontrivial geometry, consisting of a flat and a corrugated plate. Our results show an interesting crossover for δ\cal E as a function of the ratio of the mean plate distance H, to the corrugation length λ: For λ\ll H we find a {\em slower} decay \sim H^{-4}, compared to the H^{-5} behavior predicted by the …
We investigate the dynamical Casimir effect in a coplanar waveguide (CPW) terminated by a superconducting quantum interference device (SQUID). Changing the magnetic flux through the SQUID parametrically modulates the boundary condition of the CPW, and thereby, its effective length. Effective boundary velocities comparable to the speed of light in the CPW result in broadband photon generation which is identical to the one calculated in the dynamical Casimir effect for a single oscillating mirror. We estimate the power of the radiation for realistic parameters and show that it is experimentally …
The Casimir force due to {\it thermal} fluctuations (or pseudo-Casimir force) was previously calculated for the perfect Bose gas in the slab geometry for various boundary conditions. The Casimir pressure due to {\it quantum} fluctuations in a weakly-interacting dilute Bose-Einstein condensate (BEC) confined to a parallel plate geometry was recently calculated for Dirichlet boundary conditions. In this paper we calculate the Casimir energy and pressure due to quantum fluctuations in a zero-temperature homogeneous weakly-interacting dilute BEC confined to a parallel plate geometry with periodic …
We consider quantum field theories with boundary on a codimension one hyperplane. Using 1+1 dimensional examples, we clarify the relation between three parameters characterising one-point functions, finite size corrections to the ground state energy and the singularity structure of scattering amplitudes, respectively. We then develop the formalism of boundary states in general D+1 spacetime dimensions and relate the cluster expansion of the boundary state to the correlation functions using reduction formulae. This allows us to derive the cluster expansion in terms of the boundary scattering am…
The ground state energy of a boundary quantum field theory is derived in planar geometry in D+1 dimensional spacetime. It provides a universal expression for the Casimir energy which exhibits its dependence on the boundary conditions via the reflection amplitudes of the low energy particle excitations. We demonstrate the easy and straightforward applicability of the general expression by analyzing the free scalar field with Robin boundary condition and by rederiving the most important results available in the literature for this geometry.
A path integral formulation is used to study the fluctuation-induced interactions between manifolds of arbitrary shape at large separations. It is shown that the form of the interactions crucially depends on the choice of the boundary condition. In particular, whether or not the Casimir interaction is pairwise additive is shown to depend on whether the ``metallic'' boundary condition corresponds to a ``grounded'' or an ``isolated'' manifold.
The Casimir self-energy of a boundary is ultraviolet-divergent. In many cases the divergences can be eliminated by methods such as zeta-function regularization or through physical arguments (ultraviolet transparency of the boundary would provide a cutoff). Using the example of a massless scalar field theory with a single Dirichlet boundary we explore the relationship between such approaches, with the goal of better understanding the origin of the divergences. We are guided by the insight due to Dowker and Kennedy (1978) and Deutsch and Candelas (1979), that the divergences represent measurable…
A boundary undergoing relativistic motion can create particles from quantum vacuum fluctuations in a phenomenon known as the dynamical Casimir effect. We examine the creation of particles, and more generally the transformation of quantum field states, due to boundary motion in curved spacetime. We provide a novel method enabling the calculation of the effect for a wide range of trajectories and spacetimes. We apply this to the experimental scenario used to detect the dynamical Casimir effect, now adopting the Schwarzschild metric, and find novel resonances in particle creation as a result of t…
The Casimir interaction between one-dimensional metallic objects (cylinders, wires) displays unconventional features. Here we study the orientation dependence of this interaction by computing the Casimir energy between two inclined cylinders over a wide range of separations. We consider Dirichlet, Neumann and perfect metal boundary conditions, both at zero temperature and in the classical high temperature limit. For all types of boundary conditions, we find that at large distances the interaction decays slowly with distance, similarly to the case of parallel cylinders, and at small distances s…
We compute the leading radiative correction to the Casimir force between two parallel plates in the $λΦ^4$ theory. Dirichlet and periodic boundary conditions are considered. A heuristic approach, in which the Casimir energy is computed as the sum of one-loop corrected zero-point energies, is shown to yield incorrect results, but we show how to amend it. The technique is then used in the case of periodic boundary conditions to construct a perturbative expansion which is free of infrared singularities in the massless limit. In this case we also compute the next-to-leading order radiative correct…
We propose a new approach to the Casimir effect based on classical ray optics. We define and compute the contribution of classical optical paths to the Casimir force between rigid bodies. We reproduce the standard result for parallel plates and agree over a wide range of parameters with a recent numerical treatment of the sphere and plate with Dirichlet boundary conditions. Our approach improves upon proximity force approximation. It can be generalized easily to other geometries, other boundary conditions, to the computation of Casimir energy densities and to many other situations.
We define irreducible N-body spectral functions and Casimir energies and consider a massless scalar quantum field interacting locally by positive potentials with classical objects. Irreducible N-body spectral functions in this case are shown to be conditional probabilities of random walks. The corresponding irreducible contributions to scalar many-body Casimir energies are finite and positive/negative for an odd/even number of objects. The force between any two finite objects separable by a plane is always attractive in this case. Analytical and numerical world-line results for the irreducible…
Whightman function, vacuum expectation values of the field square, and the energy-momentum tensor are investigated for a scalar field inside a wedge with and without a coaxial cylindrical boundary. Dirichlet boundary conditions are assumed on the bounding surfaces. The vacuum energy-momentum tensor is evaluated in the general case of the curvature coupling parameter. Making use of a variant of the generalized Abel-Plana formula, expectation values are presented as the sum of two terms. The first one corresponds to the geometry without a cylindrical boundary and the second one is induced by the…
We demonstrate the Casimir interaction between two ferromagnetic boundary surfaces using the dynamic atomic force microscope. The experimental data are found to be in excellent agreement with the predictions of the Lifshitz theory for magnetic boundary surfaces combined with the plasma model approach. It is shown that for magnetic materials the role of hypothetical patch potentials is opposite to that required for reconciliation of the data with the Drude model.
