We provide a review of both new experimental and theoretical developments in the Casimir effect. The Casimir effect results from the alteration by the boundaries of the zero-point electromagnetic energy. Unique to the Casimir force is its strong dependence on shape, switching from attractive to repulsive as function of the size, geometry and topology of the boundary. Thus the Casimir force is a direct manifestation of the boundary dependence of quantum vacuum.
We discuss in depth the general structure of the infinities in the field theory which are removed by a combination of zeta-functional regularization and heat kernel expansion. Different representations for the regularized vacuum energy are given. The Casimir energies and forces in a number of configurations of interest to applications are calculated. We stress the development of the Casimir force for real media including effects of nonzero temperature, finite conductivity of the boundary metal and surface roughness. Also the combined effect of these important factors is investigated in detail on the basis of condensed matter physics and quantum field theory at nonzero temperature.
The experiments on measuring the Casimir force are also reviewed, starting first with the older measurements and finishing with a detailed presentation of modern precision experiments. The latter are accurately compared with the theoretical results for real media.
At the end of the review we provide the most recent constraints on the corrections to Newtonian gravitational law and other hypothetical long-range interactions at submillimeter range obtained from the Casimir force measurements.
We discuss a proposal to measure the Casimir force in the parallel plate configuration in the $1-10μ$m range via a high-sensitivity torsional balance. This will allow to measure the thermal contribution to the Casimir force therefore discriminating between the various approaches discussed so far. The accurate control of the Casimir force in this range of distances is also required to improve the limits to the existence of non-Newtonian forces in the micrometer range predicted by unification models of fundamental interactions.
We report development of a high-sensitivity torsion balance to measure the thermal Casimir force. Special emphasis is placed on experimental investigations of a possible surface electric force originating from surface patch potentials that have been recently noticed by several experimental groups. By gaining a proper understanding of the actual contribution of the surface electric force in real materials, we aim to undertake precision force measurements to resolve the Casimir force at finite temperature in real metals, as well as in other semiconducting materials, such as graphene.
In this talk I review various developments in the past year concerning quantum vacuum energy, the Casimir effect. In particular, there has been continuing controversy surrounding the temperature correction to the Lifshitz formula for the Casimir force between real materials, be they metals or semiconductors. Consensus has emerged as to how Casimir energy accelerates in a weak gravitational field; quantum vacuum energy, including the divergent parts which renormalize the masses of the Casimir plates, accelerates indeed according to the equivalence principle. Significant development has been for…
The possibility to modify the strength of the Casimir effect by tailoring the dielectric functions of the interacting surfaces is regarded as a unique opportunity in the development of Micro- and NanoElectroMechanical Systems. In air, however, one expects that, unless noble metals are used, the electrostatic force arising from trapped charges overcomes the Casimir attraction, leaving no room for exploitation of Casimir force engineering at ambient conditions. Here we show that, in the presence of a conductive oxide, the Casimir force can be the dominant interaction even in air, and that the us…
We report an improved precision measurement of the Casimir force using metallic gold surfaces. The force is measured between a large gold coated sphere and flat plate using an Atomic Force Microscope. The use of gold surfaces removes some theoretical uncertainties in the interpretation of the measurement. The forces are also measured at smaller surface separations. The complete dielectric spectrum of the metal is used in the comparison of theory to the experiment. The average statistical precision remains at the same 1% of the forces measured at the closest separation. These results should lea…
In his autobiography Casimir barely mentioned the Casimir effect, but remarked that it is "of some theortical significance." We will describe some aspects of Casimir effects that appear to be of particular significance now, more than half a century after Casimir's famous paper.
We investigate Casimir effect as well as thermal Casimir effect for a pair of parallel perfectly plates placed in general stationary space-time background. It is found that the Casimir energy is influenced by the 00-component of metric and the corresponding quantity in dragging frame. We give a scheme to renormalize thermal correction to free energy in curved space-time. It is shown that the thermal corrections to Casimir thermodynamic quantities not only depend on the proper temperature and proper geometrical parameters of the plates, but also on the determinant of space-time metric.
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recently. It has also been known for many years that electrically and magnetically polarizable bodies can experience a repulsive quantum vacuum force. More amenable to practical application are situations wh…
The Casimir effects for one-dimensional fractal networks, so-called quantum graphs is studied. Based on the Green function approach for quantum graphs zero-point energy for some simplest topologies is written explicitly.
The Casimir energy is calculated in one-, two-, and three-dimensional spaces for the field with generalized coordinates and momenta satisfying the deformed Poisson brackets leading to the minimal length.
An experimentally feasible realization of testing quantum-vacuum geometric phases of photons by using a gyrotropic-medium optical fibre via Casimir's effect is proposed.
The Casimir effect is a crucial prediction of Quantum Field Theory which has fascinating connections with open questions in fundamental physics. The ideal formula written by Casimir does not describe real experiments and it has to be generalized by taking into account the effects of imperfect reflection, thermal fluctuations, geometry as well as the corrections coming from surface physics. We discuss these developments in Casimir physics and give the current status in the comparison between theory and experiment after years of improvements in measurements as well as theory.
The geometrical phase is shown to be integral of motion. Deformation of particle distribution function corresponding to nonstationary Casimir effect is expressed in terms of multivariable Hermite polynomials. Correction to Planck distribution due to q--nonlinearity is discussed.
We present explicitly another example of a temperature inversion symmetry in the Casimir effect for a nonsymmetric boundary condition. We also give an interpretation for our result.
The temperature dependence of the Casimir effect for the radiation field confined between two conducting plates is analysed. The Casimir energy is shown to decline exponentially with temperature while the Casimir entropy which is defined in the text is shown to approach a limit which depends only on the geometry of the constraining plates. The results are discussed in terms of the relation between the Bose distribution function and the equipartition theorem - a relation based on a study by Einstein and Stern circa 1913.
It is well known that residual electrostatic forces create significant difficulties to precise measurements of the Casimir force and to wide use of Casimir-operated microdevices. We experimentally demonstrate that with the help of Ar-ion cleaning of the surfaces it is possible to make electrostatic effects negligibly small as compared to the Casimir interaction. Our experimental setup consists of the dynamic atomic force microscope supplemented with an Ar-ion gun and argon reservoir. The residual potential difference between the Au-coated surfaces of a sphere and a plate was measured both befo…
Electromagnetic fluctuation-induced forces between atoms and surfaces are generally known as Casimir-Polder interactions. The exact knowledge of these forces is rapidly becoming important in modern experimental set-ups and for technological applications. Recent theoretical and experimental investigations have shown that such an interaction is tunable in strength and sign, opening new perspectives to investigate aspects of quantum field theory and condensed-matter physics. In this Chapter we review the theory of fluctuation-induced interactions between atoms and a surface, paying particular att…
The resonant scalar particle generation for a swinging cavity resonator in the Casimir vacuum is examined. It is shown that the number of particles grows exponentially when the cavity rotates at some specific external frequency.
We present theoretical and numerical results for the screened Casimir effect between perfect metal surfaces in a plasma. We show how the Casimir effect in an electron-positron plasma can provide an important contribution to nuclear interactions. Our results suggest that there is a connection between Casimir forces and nucleon forces mediated by mesons. Correct nuclear energies and meson masses appear to emerge naturally from the screened Casimir-Lifshitz effect.
The Casimir effect is a force arising in the macroscopic world as a result of radiation pressure of vacuum fluctuations. It thus plays a key role in the emerging domain of nano-electro-mechanical systems (NEMS). This role is reviewed in the present paper, with discussions of the influence of the material properties of the mirrors, as well as the geometry dependence of the Casimir effect between corrugated mirrors. In particular, the lateral component of the Casimir force and restoring torque between metal plates with misaligned corrugations are evaluated.
The effect of slope for the rack gear in the massless scalar field model is considered. It appears, that the slope of profile surfaces can essentially change the value of normal Casimir force, whereas average value of tangential force remains almost unchanged. At the same time we observe essential shift of maximum and minimum tangential force positions.
The static Casimir effect concerns quantum electrodynamic induced Lamb shifts in the mode frequencies and thermal free energies of condensed matter systems. Sometimes, the condensed matter constitutes the boundaries of a vacuum region. The static frequency shift effects have been calculated in the one photon loop perturbation theory approximation. The dynamic Casimir effect concerns two photon radiation processes arising from time dependent frequency modulations again computed in the one photon loop approximation. Under certain conditions the one photon loop computation may become unstable and…
We discuss the Casimir effect for boundary conditions involving perfect electromagnetic conductors (PEMCs). Based on the corresponding reciprocal Green's tensor we construct the Green's tensor for two perfectly reflecting plates with magnetoelectric coupling (non-reciprocal media) within the framework of macroscopic quantum electrodynamics. We calculate the Casimir force between two PEMC plates in terms of the PEMC parameter M and the duality transformation angle $θ$ resulting in a universal analytic expression that connects the attractive Casimir force with the repulsive Boyer force. We relat…
We obtain expressions for the Casimir energy and force following an approach which may be applied to cavities made up of arbitrary materials. In the case of planar cavities we obtain the well known Lifshitz formula. The approach is easily generalizable to other geometries.
We investigate the Casimir effect in the context of a nontrivial topology by means of a generalized Matsubara formalism. This is performed in the context of a scalar field in $D$ Euclidean spatial dimensions with $d$ compactified dimensions. The procedure gives us the advantage of considering simultaneously spatial constraints and thermal effects. In this sense, the Casimir pressure in a heated system between two infinite planes is obtained and the results are compared with those found in the literature.
Motivated by a recent proposal for an experimental verification of the dynamical Casimir effect, the macroscopic electromagnetic field within a perfect cavity containing a thin slab with a time-dependent dielectric permittivity is quantized in terms of the dual potentials. For the resonance case, the number of photons created out of the vacuum due to the dynamical Casimir effect is calculated for both polarizations (TE and TM). PACS: 42.50.Lc, 03.70.+k, 42.50.Dv, 42.60.Da.
This is a brief review of different aspects of the so-called Dynamical Casimir Effect and the proposals aimed at its possible experimental realizations. A rough classification of these proposals is given and important theoretical problems are pointed out.
Applying a sum-over-modes approach to the Casimir interaction between two plates with finite conductivity, we isolate and study the contributions of surface plasmons and Foucault (eddy current) modes. We show in particular that for the TE-polarization eddy currents provide a repulsive force that cancels, at high temperatures, the Casimir free energy calculated with the plasma model.
We present systematic measurements of the Casimir force between a gold-coated plate and a sphere coated with a Hydrogen Switchable Mirror (HSM). HSMs are shiny metals that can become transparent by hydrogenation. In spite of such a dramatic change of the optical properties of the sphere, we did not observe any significant decrease of the Casimir force after filling the experimental apparatus with hydrogen. This counterintuitive result can be explained by the Lifshitz theory that describes the Casimir attraction between metallic and dielectric materials.
An experimental set-up for the measurement of the Casimir effect at separations larger than a few microns is presented. The apparatus is based on a mechanical resonator and uses a homodyne detection technique to sense the Casimir force in the plane-parallel configuration. First measurements in the 3-10 micrometer range show an unexpected large force probably due to patch effects.
We show that in order to account for the repulsive Casimir effect in the parallel plate geometry in terms of the quantum version of the Lorentz force, virtual surface densities of magnetic charges and currents must be introduced. The quantum version of the Lorentz force expressed in terms of the correlators of the electric and magnetic fields for planar geometries yields then correctly the Casimir pressure.
It is pointed out that the Casimir energy in a medium can be obtained most directly from the zero-point energy of the electromagnetic field because of its reduced propagation velocity. This brings to the fore again the old problem related to how the principle of relativity is combined with the Maxwell field equations in a continuous medium.
The Casimir effect refers to the existence of a macroscopic force between conducting plates in vacuum due to quantum fluctuations of fields. These forces play an important role, among other things, in the design of nano-scale mechanical devices. Accurate experimental observations of this phenomenon have motivated the development of new theoretical approaches in dealing with the effects of different geometries, temperature etc. In this talk, I will focus on a new method we have developed in calculating the contribution to the Casimir effect due to diffraction from edges and holes in different g…
We report a theoretical study of the optical properties of a three-level emitter embedded in an optical cavity including the non-rotating wave terms of the light-matter interaction Hamiltonian. Rabi oscillations induced by a continuous wave drive laser are responsible for a periodic time-modulation of the effective cavity resonance, which results in a significant dynamical Casimir emission. A clear signature of the back-action effect of the dynamical Casimir emission onto the drive laser is visible as a sizable suppression of its absorption.
This is a review of publications on classical and quantum electrodynamics in cavities with moving boundaries (in the quantum case this subject is labeled frequently as "nonstationary Casimir effect" or "dynamical Casimir effect"), from 1921 to October of 2000, with an emphasis on analytical results related to cavities with resonantly oscillating boundaries.
The dynamics of three interacting objects has been investigated extensively in Newtonian gravitational physics (often termed the three-body problem), and is important for many quantum systems, including nuclei, Efimov states, and frustrated spin systems. However, the dynamics of three macroscopic objects interacting through quantum vacuum fluctuations (virtual photons) is still an unexplored frontier. Here, we report the first observation of Casimir interactions between three isolated macroscopic objects. We propose and demonstrate a three terminal switchable architecture exploiting opto-mecha…
In a recent letter, Martin and Zagrebnov [Europhys. Lett., 73 (2006) 1] discussed the thermodynamic Casimir effect for the ideal Bose gas confined in a thin film. We point out that their findings can be expressed in terms of previous general results for the Casimir effect induced by confined critical fluctuations. This highlights the links between the Casimir effect in the contexts of critical phenomena and Bose-Einstein condensation.
The Casimir effect for spherical geometry is calculated using generalized Thermofield Dynamics for the case of scalar field. Casimir force and Casimir pressure are presented. It is found that for high temperatures the Casimir force does change sign.
We review recent developments in the Casimir effect which arises in quantization volumes restricted by material boundaries and in spaces with non-Euclidean topology. The starting point of our discussion is the novel exact solution for the electromagnetic Casimir force in the configuration of a cylinder above a plate. The related work for the scalar Casimir effect in sphere-plate configuration is also considered, and the application region of the proximity force theorem is discussed. Next we consider new experiments on the measurement of the Casimir force between metals and between metal and se…
We review modern achievements and problems in physics of the van der Waals and Casimir forces which arise due to zero-point and thermal fluctuations of the electromagnetic field between closely spaced material surfaces. This subject attracted great experimental and theoretical attention during the last few years because the fluctuation-induced forces find a lot of applications in both fundamental physics and nanotechnology. After a short introduction to the subject, we describe main experimental and theoretical results obtained in the field during the last fifteen years. In the following prese…
The Casimir Force, a quantum mechanical effect, has been observed in several microelectromechanical systems (MEMS) platforms. Due to its extreme sensitivity to the separation of two objects, the Casimir Force has been proposed as an excellent avenue for quantum metrology. Practical application, however, is challenging due to attractive forces leading to stiction and failure of the device, called Casimir pull-in. In this work, we design and simulate a Casimir-driven metrology platform, where a time-delay based parametric amplification technique is developed to achieve a steady state and avoid p…
We propose a method for the detection of a dynamical Casimir effect. Assuming that the Casimir photons are being generated in an electromagnetic cavity with a vibrating wall (dynamical Casimir effect), we consider electrons passing through the cavity to be interacting with the intracavity field. We show that the dynamical Casimir effect can be observed via the measurement of the change in the average or in the variance of the electron kinetic energy. We point out that the enhancement of the effect due to finite temperatures makes it easier to detect the Casimir photons.
We consider the Casimir effect of a massive vector field between two semi-infinite dielectric slabs. We first derive the generalization of the Lifshitz formula that gives the Casimir interaction energy of two magnetodielectric slabs separated by a magnetodielectric medium due to the vacuum fluctuations of a massive vector field. We then discuss the asymptotic behaviors of the Casimir energy and the Casimir force in various limits, such as low temperature, high temperature, small mass, large mass, up to the first order in the finite conductivity correction, for two real metal semispaces whose d…
We give a short review on the static and dynamical Casimir effects, recalling their historical prediction, as well as their more recent experimental verification. We emphasise on the central role played by so-called {\it dynamical boundary conditions} (for which the boundary condition depends on a second time derivative of the field) in the experimental verification of the dynamical Casimir effect by Wilson et al. We then go on to review our previous work on the static Casimir effect with dynamical boundary conditions, providing an overview on how to compute the so-called local Casimir energy,…
We propose a definitive test of whether plates involved in Casimir experiments should be modeled with ballistic or diffusive electrons--a prominent controversy highlighted by a number of conflicting experiments. The unambiguous test we propose is a measurement of the Casimir force between a disordered quasi-2D metallic plate and a three-dimensional metallic system at low temperatures, in which disorder-induced weak localization effects modify the well-known Drude result in an experimentally tunable way. We calculate the weak localization correction to the Casimir force as a function of magneti…
Using numerical analytic continuation, we compute the Zeta function for the Casimir Effect for circular geometries in 2+1 dimensions. After subtraction of the simple pole of the zeta function, essentially MS renormalization, we find the Casimir force is repulsive. Implications for the stability of 2+1 dimensional domain walls and Axion membranes in 3+1 dimensions are discussed, especially in the context of strongly coupled underlying physics.
We study Casimir effect in equilibrium and non-equilibrium photon gas in the frame of quantum kinetic theory for $U(1)$ gauge field. We derive first the transport, constraint and gauge fixing equations for the photon number distribution from Maxwell's equations, and then calculate the energy variation and Casimir force for a finite system by considering boundary condition on the surface of the system. The Casimir force in vacuum is suppressed by the thermal motion of photons in equilibrium state, when considering two adiabatic plates. In non-equilibrium state, the photon induced Casimir force …
Measurements of the Casimir force are used to obtain stronger constraints on the parameters of hypothetical interactions predicted in different unification schemes beyond the Standard Model. We review new strong constraints on the Yukawa-type interactions derived during the last two years from recent experiments on measuring the lateral Casimir force, Casimir force in configurations with corrugated boundaries and the Casimir-Polder force. Specifically, from measurements of the lateral Casimir force compared with the exact theory the strengthening of constraints up to a factor of 24 millions wa…
Like Casimir's original force between conducting plates in vacuum, Casimir forces are usually attractive. But repulsive Casimir forces can be achieved in special circumstances. These might prove useful in nanotechnology. We give examples of when repulsive quantum vacuum forces can arise with conducting materials.
We discuss several approaches to determine the Casimir force in inertial frames of reference in different dimensions. On an example of a simple model involving mirrors in Rindler spacetime we show that Casimir's and Lifschitz's methods are inequivalent and only latter can be generalized to other spacetime geometries. For conformally coupled fields we derive the Casimir force in conformally flat spacetimes utilizing an anomaly and provide explicit examples in the Friedmann-Lemaitre-Robertson-Walker $(k=0)$ models.
The zero-point quantum fluctuations of the electromagnetic field in vacuum are known to give rise to a long-range attractive force between metal plates (Casimir effect). For ferromagnetic layers separated by vacuum, it is shown that the interplay of the Casimir effect and of the magneto-optical Kerr effect gives rise to a long-range magnetic interaction. The Casimir magnetic force is found to decay as $D^{-1}$ in the limit of short distances, and as $D^{-5}$ in the limit of long distances. Explicit expressions for realistic systems are given in the large and small distance limits. An experimen…
Theory of the Casimir effect is presented in several examples. Casimir - Polder type formulas, Lifshitz theory and theory of the Casimir effect for two gratings separated by a vacuum slit are derived. Equations for the electromagnetic field in the presence of a medium and dispersion are discussed. Casimir effect for systems with a layer of 2+1 fermions is studied.
We recently proposed a new approach to the Casimir effect based on classical ray optics (the "optical approximation"). In this paper we show how to use it to calculate the local observables of the field theory. In particular we study the energy-momentum tensor and the Casimir pressure. We work three examples in detail: parallel plates, the Casimir pendulum and a sphere opposite a plate. We also show how to calculate thermal corrections, proving that the high temperature `classical limit' is indeed valid for any smooth geometry.
The Casimir effect results from the optomechanical coupling between field fluctuations and mirrors in quantum vacuum. This contribution to the 20th International Conference on Laser Spectroscopy (ICOLS 2011) discusses the current status in the comparison between theory and experiments.
