The Casimir effect refers to the existence of a macroscopic force between conducting plates in vacuum due to quantum fluctuations of fields. These forces play an important role, among other things, in the design of nano-scale mechanical devices. Accurate experimental observations of this phenomenon have motivated the development of new theoretical approaches in dealing with the effects of different geometries, temperature etc. In this talk, I will focus on a new method we have developed in calculating the contribution to the Casimir effect due to diffraction from edges and holes in different geometries, at zero and at finite temperature.
We compute Casimir forces in open geometries with edges, involving parallel as well as perpendicular semi-infinite plates. We focus on Casimir configurations which are governed by a unique dimensional scaling law with a universal coefficient. With the aid of worldline numerics, we determine this coefficient for various geometries for the case of scalar-field fluctuations with Dirichlet boundary conditions. Our results facilitate an estimate of the systematic error induced by the edges of finite plates, for instance, in a standard parallel-plate experiment. The Casimir edge effects for this cas…
The prototypical Casimir effect arises when a scalar field is confined between parallel Dirichlet boundaries. We study corrections to this when the boundaries themselves have apertures and edges. We consider several geometries: a single plate with a slit in it, perpendicular plates separated by a gap, and two parallel plates, one of which has a long slit of large width, related to the case of one plate being semi-infinite. We develop a general formalism for studying such problems, based on the wavefunctional for the field in the gap between the plates. This formalism leads to a lower dimension…
An exact calculation of electromagnetic scattering from a perfectly conducting parabolic cylinder is employed to compute Casimir forces in several configurations. These include interactions between a parabolic cylinder and a plane, two parabolic cylinders, and a parabolic cylinder and an ordinary cylinder. To elucidate the effect of boundaries, special attention is focused on the "knife-edge" limit in which the parabolic cylinder becomes a half-plane. Geometrical effects are illustrated by considering arbitrary rotations of a parabolic cylinder around its focal axis, and arbitrary translations…
Although repulsive effects have been predicted for quantum vacuum forces between bodies with nontrivial electromagnetic properties, such as between a perfect electric conductor and a perfect magnetic conductor, realistic repulsion seems difficult to achieve. Repulsion is possible if the medium between the bodies has a permittivity in value intermediate to those of the two bodies, but this may not be a useful configuration. Here, inspired by recent numerical work, we initiate analytic calculations of the Casimir-Polder interaction between an atom with anisotropic polarizability and a plate with…
The effect of edges and apertures on the Casimir energy of an arrangement of plates and boundaries can be calculated in terms of an effective nonlocal lower-dimensional field theory that lives on the boundary. This formalism has been developed in a number of previous papers and applied to specific examples with Dirichlet boundary conditions. Here we generalize the formalism to arbitrary boundary conditions. As a specific example, the geometry of a flat plate and a half-plate placed parallel to it is considered for a number of different boundary conditions and the area-dependent and edge depend…
The Casimir force has been computed exactly for only a few simple geometries, such as infinite plates, cylinders, and spheres. We show that a parabolic cylinder, for which analytic solutions to the Helmholtz equation are available, is another case where such a calculation is possible. We compute the interaction energy of a parabolic cylinder and an infinite plate (both perfect mirrors), as a function of their separation and inclination, $H$ and $θ$, and the cylinder's parabolic radius $R$. As $H/R\to 0$, the proximity force approximation becomes exact. The opposite limit of $R/H\to 0$ correspo…
Casimir pistons are models in which finite Casimir forces can be calculated without any suspect renormalizations. It has been suggested that such forces are always attractive. We present three scenarios in which that is not true. Two of these depend on mixing two types of boundary conditions. The other, however, is a simple type of quantum graph in which the sign of the force depends upon the number of edges.
We reexamine the Casimir effect for the rectangular cavity with two or three equal edges in the presence of compactified universal extra dimension. We derive the expressions for the Casimir energy and discuss the nature of Casimir force. We show the extra-dimension corrections to the standard Casimir effect.
The Casimir effect is investigated in cylindrical and toroidal carbon nanotubes within the framework of the Dirac-like model for the electronic states. The topological Casimir energy is positive for metallic cylindrical nanotubes and is negative for semiconducting ones. The toroidal compactification of a cylindrical nanotube along its axis increases the Casimir energy for metallic-type (periodic) boundary conditions along its axis and decreases the Casimir energy for the semiconducting-type compactifications. For finite length metallic nanotubes the Casimir forces acting on the tube edges are …
We study the interplay of thermal and diffractive effects in Casimir energies. We consider plates with edges, oriented either parallel or perpendicular to each other, as well as a single plate with a slit. We compute the Casimir energy at finite temperature using a formalism in which the diffractive effects are encoded in a lower dimensional non-local field theory that lives in the gap between the plates. The formalism allows for a clean separation between direct or geometric effects and diffractive effects, and makes an analytic derivation of the temperature dependence of the free energy poss…
Casimir forces between conductors at the sub-micron scale cannot be ignored in the design and operation of micro-electromechanical (MEM) devices. However, these forces depend non-trivially on geometry, and existing formulae and approximations cannot deal with realistic micro-machinery components with sharp edges and tips. Here, we employ a novel approach to electromagnetic scattering, appropriate to perfect conductors with sharp edges and tips, specifically to wedges and cones. The interaction of these objects with a metal plate (and among themselves) is then computed systematically by a multi…
A generalization of the Bogoliubov transformation is developed to describe a space compactified fermionic field. The method is the fermionic counterpart of the formalism introduced earlier for bosons (J. C. da Silva, A. Matos Neto, F. C. Khanna and A. E. Santana, Phys. Rev. A 66 (2002) 052101), and is based on the thermofield dynamics approach. We analyse the energy-momentum tensor for the Casimir effect of a free massless fermion field in a $d$-dimensional box at finite temperature. As a particular case the Casimir energy and pressure for the field confined in a 3-dimensional parallelepiped b…
Quantum vacuum energy has been known to have observable consequences since 1948 when Casimir calculated the force of attraction between parallel uncharged plates, a phenomenon confirmed experimentally with ever increasing precision. Casimir himself suggested that a similar attractive self-stress existed for a conducting spherical shell, but Boyer obtained a repulsive stress. Other geometries and higher dimensions have been considered over the years. Local effects, and divergences associated with surfaces and edges have been investigated by several authors. Quite recently, Graham et al. have re…
We provide further evidence for the nontrivial interplay between geometry and temperature in the Casimir effect. We investigate the temperature dependence of the Casimir force between an inclined semi-infinite plate above an infinite plate in D dimensions using the worldline formalism. Whereas the high-temperature behavior is always found to be linear in T in accordance with dimensional-reduction arguments, different power-law behaviors at small temperatures emerge. Unlike the case of infinite parallel plates, which shows the well-known T^D behavior of the force, we find a T^{D-1} behavior for…
The fermion condensate (FC) is investigated for a (2+1)-dimensional massive fermionic field confined on a truncated cone with an arbitrary planar angle deficit and threaded by a magnetic flux. Different combinations of the boundary conditions are imposed on the edges of the cone. They include the bag boundary condition as a special case. By using the generalized Abel-Plana-type summation formula for the series over the eigenvalues of the radial quantum number, the edge-induced contributions in the FC are explicitly extracted. The FC is an even periodic function of the magnetic flux with the pe…
We investigate the combined effects of boundaries and topology on the vacuum expectation values (VEVs) of the charge and current densities for a massive 2D fermionic field confined on a conical ring threaded by a magnetic flux. Different types of boundary conditions on the ring edges are considered for fields realizing two inequivalent irreducible representations of the Clifford algebra. The related bound states and zero energy fermionic modes are discussed. The edge contributions to the VEVs of the charge and azimuthal current densities are explicitly extracted and their behavior in various a…
General Junction Condition and Casimir Effect for (1+1)-Dimensional Scalar Network CFT
Guangdong Provincial Key Laboratory of Nanophotonic Functional Materials and Devices, South China Normal University（华南师范大学）；School of Physics and Astronomy, Sun Yat-Sen University（中山大学）
A perfectly reflecting (Dirichlet) boundary condition at the edge of an impenetrable magnetic-flux-carrying tube of nonzero transverse size is imposed on the charged massive scalar matter field which is quantized outside the tube. We show that the vacuum polarization effects outside the tube give rise to a macroscopic force acting at the increase of the tube radius (if the magnetic flux is held steady). The Casimir energy and force are periodic in the value of the magnetic flux, being independent of the coupling to the space-time curvature scalar. We conclude that a topological defect of the v…
The Casimir effect for rectangular boxes has been studied for several decades. But there are still some points unclear. Recently, there are new developments related to this topic, including the demonstration of the equivalence of the regularization methods and the clarification of the ambiguity in the regularization of the temperature-dependent free energy. Also, the interesting quantum spring was raised stemming from the topological Casimir effect of the helix boundary conditions. We review these developments together with the general derivation of the Casimir energy of the $p$-dimensional ca…
A perfectly reflecting (Dirichlet) boundary condition at the edge of an impenetrable magnetic-flux-carrying tube of nonzero transverse size is imposed on the charged massive scalar matter field which is quantized outside the tube on a plane which is transverse to the tube. We show that the vacuum polarization effects outside the tube give rise to a macroscopic force acting at the increase of the tube radius (if the magnetic flux is held steady).
Due to their collective nature Casimir forces can strongly depend on the geometrical shape of the interacting objects. We study the effect of strong periodic shape deformations of two ideal metal plates on their quantum interaction. A non-perturbative approach which is based on a path integral quantization of the electromagnetic field is presented in detail. Using this approach, we compute the force for the specific case of a flat plate and a plate with a rectangular corrugation. We obtain complementary analytical and numerical results which allow us to identify two different scaling regimes f…
The consistency of quantum field theories defined on domains with external borders imposes very restrictive constraints on the type of boundary conditions that the fields can satisfy. We analyse the global geometrical and topological properties of the space of all possible boundary conditions for scalar quantum field theories. The variation of the Casimir energy under the change of boundary conditions reveals the existence of singularities generically associated to boundary conditions which either involve topology changes of the underlying physical space or edge states with unbounded below cla…
Quantum vacuum energy has been known to have observable consequences since 1948 when Casimir calculated the force of attraction between parallel uncharged plates, a phenomenon confirmed experimentally with ever increasing precision. Casimir himself suggested that a similar attractive self-stress existed for a conducting spherical shell, but Boyer obtained a repulsive stress. Other geometries and higher dimensions have been considered over the years. Local effects, and divergences associated with surfaces and edges have been studied by several authors. Quite recently, Graham et al. have re-exam…
We evaluate the Casimir energy and force for a massive fermionic field in the geometry of two parallel plates on background of Minkowski spacetime with an arbitrary number of toroidally compactified spatial dimensions. The bag boundary conditions are imposed on the plates and periodicity conditions with arbitrary phases are considered along the compact dimensions. The Casimir energy is decomposed into purely topological, single plate and interaction parts. With independence of the lengths of the compact dimensions and the phases in the periodicity conditions, the interaction part of the Casimi…
We investigate the fermionic condensate and the vacuum expectation value of the energy-momentum tensor for a massive fermionic field in the geometry of two parallel plate on the background of Minkowski spacetime with an arbitrary number of toroidally compactified spatial dimensions, in the presence of a constant gauge field. Bag boundary conditions are imposed on the plates and periodicity conditions with arbitrary phases are considered along the compact dimensions. The boundary induced parts in the fermionic condensate and the vacuum energy density are negative, with independence of the phase…
