arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2602.06732physics.optics
收藏

低损耗氮化硅集成电路中的热弹性体面声波

Thermoelastic surface acoustic waves in low-loss silicon nitride integrated circuits

University of Twente(特温特大学)

Zheng Zheng, Ahmet Tarık Işık, Akshay Keloth, Kaixuan Ye, Peter van der Slot, David Marpaung

AI总结:

本研究利用热弹性体面声波在低损耗氮化硅集成电路中实现无额外材料的声光调制,通过多程配置提升相位调制效率13.6 dB,并观测到单边带模散射抑制比8 dB。

摘要:

在光子集成电路中,声光调制的应用包括信号处理、量子光子学和微波光子学。然而,作为主流低损耗可扩展光子平台的氮化硅(Si3N4),由于缺乏压电效应,因此总是需要与其他材料的混合共集成才能实现声光调制。在这里,我们利用8 dB/m传播损耗的Si3N4集成电路中的热弹性体面声波(SAW)实现了无额外材料的声光调制。通过多程配置实现了相位调制效率提升13.6 dB。此外,测量到单边带模散射抑制比为8 dB,并通过将相位调制整合到环形谐振器光谱中观察到强度调制。这种热弹性SAW技术作为在低损耗Si3N4平台中实现声光调制的初步步骤,对于集成微波光子学和可编程光子学应用具有前景。

英文摘要:

Acousto-optic modulation in photonic integrated circuits harness the applications that include signal processing, quantum photonics and microwave photonics. However, silicon nitride ($\rm{Si_3N_4}$), as a main-stream low-loss scalable photonic platform, suffers from the lack of piezoelectric effect and therefore the hybrid co-integration with other materials is always required for acousto-optic modulation. Here, we employed thermoelastic surface acoustic waves (SAW) in a 8 dB/m propagation loss $\rm{Si_3N_4}$ integrated circuits without adding extra materials. A phase modulation efficiency enhancement of 13.6 dB is realized with a multi-pass configuration. Furthermore, a single-sideband intermodal scattering with a suppression ratio of 8 dB is measured and an intensity modulation is observed by incorporating the phase modulation into a ring resonator spectral. This thermoelastic SAW technique, as an initial step of acousto-optic modulation in low-loss $\rm{Si_3N_4}$ platform, is promising for integrated microwave photonics and programmable photonics applications.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑