High pressure shear band formation is a critical phenomenon in energetic materials due to its influence on both mechanical strength and mechanochemical activation. While shear banding is know to occur in a variety of these materials, the governing dynamics of the mechanisms is not well defined for molecular crystals. We conduct molecular dynamics simulations of shock wave induced shear band formation in the energetic material 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) to assess shear band nucleation processes. We find, that at high pressures, the initial formation sites for shear bands 'over-nucleate' and rapidly lower deviatoric stresses prior to shear band formation and growth. This results in the suppression of plastic deformation. A local cluster analysis is used to quantify and contrast this mechanism with a more typical shear banding seen at lower pressures. These results demonstrate a mechanism that is reversible in nature and that supersedes shear band formation at increased pressures. We anticipate that these results will have a broad impact on the modeling and development of high strain rate application materials such as those for high explosives and hypersonic systems.
Nucleation suppression by charge screening on grain boundaries: a kinetic model for bulk imprint in polycrystalline ferroelectric thin films
Zhangjiang Laboratory(张江实验室);Frontier Institute of Chip and System, Fudan University(复旦大学芯片与系统前沿研究院);Institute of Microelectronics, Chinese Academy of Sciences(中国科学院微电子研究所)
Transformation-mediated twinning governs plasticity in body-centered cubic nanocrystals under extreme loading
University of West Bohemia in Pilsen(西波希米亚大学);University of Helsinki(赫尔辛基大学);National Centre for Nuclear Research(国家核研究中心);Universitat Politècnica de Catalunya(加泰罗尼亚理工大学)
Enabling plastic co-deformation of disparate phases in a laser rapid solidified Sr-modified Al-Si eutectic through partial-dislocation-mediated-plasticity in Si
Nucleation in a sheared Ising model: effects of external field
用前向通量取样法模拟了二维剪切伊辛模型[R. J. Allen等人,arXiv cond-mat/0805.3029]。对于准平衡系统(即在剪切的情况下),经典成核理论(CNT)预测的临界团簇大小和成核速率的外部磁场的依赖性。我们研究了剪切伊辛模型作为外场函数的行为。在较低的外磁场强度下,同样的非单调行为成立,成核速率的峰值对磁场强度明显不敏感。这表明,相同的外部场的依赖性保持在低剪切速率下的剪切成核的增强和剪切在高剪切速率下的抑制。在高场强下,成核行为是定性不同的。我们还分析了在过渡态配置的最大集群的大小和形状,作为一个功能的外部场。在剪切体系中,随着电场强度的降低,过渡态团簇变得更大、更长。我们比较我们的结果剪切系统的CNT的预测准平衡的情况下,发现CNT不能很容易地用来描述剪切下的系统中的成核。
Suppression of acoustic emission during superelastic tensile cycling of polycrystalline Ni$_{50.4}$Ti$_{49.6}$
研究了超弹性/弹热合金Ni $_{50.4}$ Ti $_{49.6}$(at. %)使用拉伸应变驱动。我们使用两个独立的AE传感器,以定位AE事件,并专注于从机械试验机的夹具中产生的AE的贡献。在第一次机械加载期间存在显著的AE活动,这主要是由于在正向马氏体转变期间宽Lüders样带的成核和生长(使用可见光和红外(IR)辐射成像)导致晶间相互作用的持续变化。AE活动被抑制在随后的反向马氏体相变卸载,并在连续的加载/卸载循环,Lüders样带变窄,修改晶粒间的相互作用,以更小的程度。在第一次加载后,我们发现与马氏体相变相关的AE活动很弱,我们认为这是因为Ni-Ti中的弹性各向异性和应变不相容性较低。我们还发现,AE活动变得较弱的机械循环,由于保留马氏体的增加。
Plastic deformation mechanisms during nanoindentation of W, Mo, V body-centered cubic single crystals and their corresponding W-Mo, W-V equiatomic random solid solutions
Zonal dislocations in Laves phases: A coupled synchro-shear slip mechanism
RWTH Aachen University(亚琛工业大学);Ruhr University Bochum(波鸿鲁尔大学);Max Planck Institute for Sustainable Materials(马普可持续材料研究所);Fuyao University of Science and Technology(福耀科技大学);Université de Lorraine(洛林大学);Helmholtz-Zentrum Berlin für Materialien und Energie(柏林亥姆霍兹材料与能源中心)