多晶Ni $_{50.4}$ Ti $_{49.6}$超弹性拉伸循环过程中声发射的抑制
Suppression of acoustic emission during superelastic tensile cycling of polycrystalline Ni$_{50.4}$Ti$_{49.6}$
摘要:
研究了超弹性/弹热合金Ni $_{50.4}$ Ti $_{49.6}$(at. %)使用拉伸应变驱动。我们使用两个独立的AE传感器,以定位AE事件,并专注于从机械试验机的夹具中产生的AE的贡献。在第一次机械加载期间存在显著的AE活动,这主要是由于在正向马氏体转变期间宽Lüders样带的成核和生长(使用可见光和红外(IR)辐射成像)导致晶间相互作用的持续变化。AE活动被抑制在随后的反向马氏体相变卸载,并在连续的加载/卸载循环,Lüders样带变窄,修改晶粒间的相互作用,以更小的程度。在第一次加载后,我们发现与马氏体相变相关的AE活动很弱,我们认为这是因为Ni-Ti中的弹性各向异性和应变不相容性较低。我们还发现,AE活动变得较弱的机械循环,由于保留马氏体的增加。
英文摘要:
We investigate acoustic emission (AE) that arises during the martensitic transition in a polycrystalline specimen of the prototypical superelastic/elastocaloric alloy Ni$_{50.4}$Ti$_{49.6}$ (at. %) driven using tensile strain. We use two independent AE sensors in order to locate AE events, and focus on contributions to the AE that arise away from the grips of the mechanical testing machine. Significant AE activity is present during the first mechanical loading primarily due to nucleation and growth of wide Lüders-like bands during the forward martensitic transition (imaged using visible light and infrared (IR) radiation) that lead to persistent changes in intergranular interactions. AE activity is suppressed during the subsequent reverse martensitic transition on unloading, and in successive loading/unloading cycles, for which the Lüders-like bands narrow and modify intergranular interactions to much less extent. After the first loading, we find that the AE activity associated with the martensitic transition is weak, and we suggest that this is because the elastic anisotropy and strain incompatibility in Ni-Ti are low. We also find that the AE activity becomes weaker on mechanically cycling due to increased retained martensite.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。