Dislocations are the carriers of plasticity in crystalline materials. Their collective interaction behavior is dependent on the strain rate and sample size. In small specimens, details of the nucleation process are of particular importance. In the present work, discrete dislocation dynamics (DDD) simulations are performed to investigate the dominant yielding mechanisms in single crystalline copper pillars with diameters ranging from 100 to 800 nm. Based on our simulations with different strain rates and sample size, we observe a transition of the relevant nucleation mechanism from "dislocation multiplication" to "surface nucleation". Two physics-based analytical models are established to quantitatively predict this transition, showing a good agreement for different strain rates with our DDD simulation data and with available experimental data. Therefore, the proposed analytical models help to understand the interplay between different physical parameters and nucleation mechanisms and are well suitable to estimate the material strength for different material properties and under given loading conditions.
The spontaneous emergence of heterogeneous dislocation patterns is a conspicuous feature of plastic deformation and strain hardening of crystalline solids. Despite long-standing efforts in the materials science and physics of defect communities, there is no general consensus regarding the physical mechanism which leads to the formation of dislocation patterns. In order to establish the fundamental mechanism, we formulate an extremely simplified, minimal model to investigate the formation of patterns based on the continuum theory of fluxes of curved dislocations. We demonstrate that strain hard…
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows maintaining extraordinarily high strength and remarkably enhanced plasticity. Underlying mechanisms featuring interaction between the segregations and mobile dislocations are discussed.
The importance of accurate simulation of the plastic deformation of ductile metals to the design of structures and components is well-known. Many techniques exist that address the length scales relevant to deformation pro- cesses, including dislocation dynamics (DD), which models the interaction and evolution of discrete dislocation line segments, and crystal plasticity (CP), which incorporates the crystalline nature and restricted motion of dis- locations into a higher scale continuous field framework. While these two methods are conceptually related, there have been only nominal efforts focu…
We report the first ab initio density-functional study of <111> screw dislocations cores in the bcc transition metals Mo and Ta. Our results suggest a new picture of bcc plasticity with symmetric and compact dislocation cores, contrary to the presently accepted picture based on continuum and interatomic potentials. Core energy scales in this new picture are in much better agreement with the Peierls energy barriers to dislocation motion suggested by experiments.
A Phenomenological Mesoscopic Field Dislocation Mechanics (PMFDM) model is developed, extending continuum plasticity theory for studying initial-boundary value problems of small-scale plasticity. PMFDM results from an elementary space-time averaging of the equations of Field Dislocation Mechanics (FDM), followed by a closure assumption from any strain-gradient plasticity model that attempts to model effects of geometrically-necessary dislocations (GND) only in work-hardening.
Microcrystals deform very differently from their macroscopic counterparts, displaying a size-dependent yield stress and intermittent plastic strain bursts. Here we demonstrate that size effects and strain bursts may be just two different signatures of fundamental collective phenomena that govern the dynamics of dislocation systems on all scales. We confirm this conjecture by demonstrating agreement between the results of 2D and 3D dislocation dynamics simulations and experimental results on compressed micropillars. Our results indicate that many peculiarities of small-sample plasticity may ari…
The thermodynamic theory of dislocation-enabled plasticity is based on two unconventional hypotheses. The first of these is that a system of dislocations, driven by external forces and irreversibly exchanging heat with its environment, must be characterized by a thermodynamically defined effective temperature that is not the same as the ordinary temperature. The second hypothesis is that the overwhelmingly dominant mechanism controlling plastic deformation is thermally activated depinning of entangled pairs of dislocations. This paper consists of a systematic reformulation of this theory follo…
Micro-plasticity theories and models are suitable to explain and predict mechanical response of devices on length scales where the influence of the carrier of plastic deformation - the dislocations - cannot be neglected or completely averaged out. To consider these effects without resolving each single dislocation a large variety of continuum descriptions has been developed, amongst which the higher-dimensional continuum dislocation dynamics (hdCDD) theory by Hochrainer et al. (Phil. Mag. 87, pp. 1261-1282) takes a different, statistical approach and contains information that are usually only …
Due to recent successes of a statistical-based nonlocal continuum crystal plasticity theory for single-glide in explaining various aspects such as dislocation patterning and size-dependent plasticity, several attempts have been made to extend the theory to describe crystals with multiple slip systems using ad-hoc assumptions. We present here a mesoscale continuum theory of plasticity for multiple slip systems of parallel edge dislocations. We begin by constructing the Bogolyubov-Born-Green-Yvon-Kirkwood (BBGYK) integral equations relating different orders of dislocation correlation functions i…
Results of recent large-scale molecular dynamics simulations of dislocation-mediated solid plasticity are campared with predictions of the statistical thermodynamic theory of these phenomena. These computational and theoretical analyses are in substantial agreement with each other in both their descriptions of strain-rate dependent steady plastic flow and of a transient stress peak associated with initially small densities of dislocations. The comparisons between the numerical simulations and basic theory reveal inconsistencies in some conventional phenomenological descriptions of solid plasti…
In small volumes, sample dimensions are known to strongly influence mechanical behavior, especially strength and crystal plasticity. This correlation fades away at the so-called mesoscale, loosely defined at several micrometers in both experiments and simulations. However, this picture depends on the entanglement of the initial defect configuration. In this paper, we study the effect of sample dimensions with a full control on dislocation topology, through the use of a novel observable for dislocation ensembles, the $Λ$-invariant, that depends only on mutual dislocation linking: It is built on…
It is well known that diamond does not deform plastically at room temperature and usually fails in catastrophic brittle fracture. Here we demonstrate room-temperature dislocation plasticity in sub-micrometer sized diamond pillars by in-situ mechanical testing in the transmission electron microscope. We document in unprecedented details of spatio-temporal features of the dislocations introduced by the confinement-free compression, including dislocation generation and propagation. Atom-resolved observations with tomographic reconstructions show unequivocally that mixed-type dislocations with Bur…
Here we present a model to study the micro-plastic regime of a stress-strain curve. In this model an explicit dislocation population represents the mobile dislocation content and an internal shear-stress field represents a mean-field description of the immobile dislocation content. The mobile dislocations are constrained to a simple dipolar mat geometry and modelled via a dislocation dynamics algorithm, whilst the shear-stress field is chosen to be a sinusoidal function of distance along the mat direction. The latter, defined by a periodic length and a shear-stress amplitude, represents a pre-…
Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and precipitates. When a dislocation encounters a precipitate, it bends and therefore the level of applied stress to the precipitate increases. Once the applied stress reaches the precipitate resistance, it passes the precipitate. Dislocations can bypass precipitates either by forming the Orowan loops or by cutting them. In this research, the focus is set on a s…
Stressed dislocation pattern formation in crystal plasticity at finite deformation is demonstrated for the first time. Size effects are also demonstrated within the same mathematical model. The model involves two extra material parameters beyond the requirements of standard classical crystal plasticity theory. The dislocation microstructures shown are decoupled from deformation microstructures, and emerge without any consideration of latent hardening or constitutive assumptions related to cross-slip. Crystal orientation effects on the pattern formation and mechanical response are also demonstr…
The statistics and origin of the first discrete plastic event in a one dislocation dynamics simulation are studied. This is done via a linear stability analysis of the evolving dislocation configuration up to the onset of irreversible plasticity. It is found, via a fold catastrophe, the dislocation configuration prior to loading directly determines the stress at which the plastic event occurs and that between one and two trigger dislocations are involved. The resulting irreversible plastic strain arising from the instability is found to be highly correlated with these triggering dislocations.
This work proposes a dislocation density-based strain gradient $J_2$ plasticity framework that models the strength contribution due to Geometrically Necessary Dislocations (GNDs) using a lower order, Taylor hardening backstress model. An anisotropy factor is introduced to phenomenologically represent the differential hardening between grains in this $J_2$ plasticity framework. An implicit numerical algorithm is implemented for the time integration of the finite deformation plasticity model. The framework is first used to predict directional hardening due to the GND-induced backstress during cy…
We present a thermodynamic description of crystal plasticity. Our formulation is based on the Langer-Bouchbinder-Lookman thermodynamic dislocation theory (TDT), which asserts the fundamental importance of an effective temperature that describes the state of configurational disorder and therefore the dislocation density of the crystalline material. We extend the TDT description from isotropic plasticity to crystal plasticity with many slip systems. Finite-element simulations show favourable comparison with experiments on polycrystal fcc copper under uniaxial compression, tension, and simple she…
The structure and mobility of dislocations in the layered semiconductor InSe is studied within a multiscale approach based on generalized Peierls--Nabarro model with material-specific parametrization derived from first principles. The plasticity of InSe turns out to be attributed to peculiarities of the generalized stacking fault relief for the interlayer dislocation slips such as existence of the stacking fault with a very low energy and low energy barriers. Our results give a consistent microscopic explanation of recently observed [Science {\bf 369}, 542 (2020)] exceptional plasticity of InS…
In an attempt to bridge the gap between atomistic and continuum plasticity simulations of hydrogen in iron, we present three dimensional discrete dislocation plasticity simulations incorporating the hydrogen elastic stress and a hydrogen dependent dislocation mobility law. The hydrogen induced stress is incorporated following the formulation derived by Gu and El-Awady (2018) which here we extend to a finite boundary value problem, a microcantilever beam, via the superposition principle. The hydrogen dependent mobility law is based on first principle calculations by Katzarov et al. (2017) and w…
Dislocation core properties of Al with and without H impurities are studied using the Peierls-Nabarro model with parameters determined by ab initio calculations. We find that H not only facilitates dislocation emission from the crack tip but also enhances dislocation mobility dramatically, leading to macroscopically softening and thinning of the material ahead of the crack tip. We observe strong binding between H and dislocation cores, with the binding energy depending on dislocation character. This dependence can directly affect the mechanical properties of Al by inhibiting dislocation cross-…
In the present work, we propose a novel model coupling phase-field, dislocation density based plasticity and damage. The dislocation density governing equations are constructed based on evolutions of mobile and immobile dislocations. Mechanisms including dislocation multiplication, annihilation, mobile-immobile transfer due to dislocation interactions and block of interfaces are incorporated in the model. Especially, the "swallow-gap" problem surrounding the coarsened second phase, which often appears in dislocation and phase-field coupled simulations, is solved in the present model. Moreover,…
The Discrete Dislocation (DD) analysis and its computional modeling have been advanced significantly over the past decade. This progress has been further magnified by the idea to couple DD with continuum mechanics analysis in association with computational algorithms such as finite elements. This coupling may pave the way to better understanding of the local response of materials at the micro scale and globally at the macroscale, increasing the potential for future applications in material, mechanical, structural and process engineering analyses.
The critical dynamics of dislocation avalanches in plastic flow is examined using a phase field crystal (PFC) model. In the model, dislocations are naturally created, without any \textit{ad hoc} creation rules, by applying a shearing force to the perfectly periodic ground state. These dislocations diffuse, interact and annihilate with one another, forming avalanche events. By data collapsing the event energy probability density function for different shearing rates, a connection to interface depinning dynamics is confirmed. The relevant critical exponents agree with mean field theory predictio…
We present a framework which unifies classical phenomenological $J_2$ and crystal plasticity theories with quantitative dislocation mechanics. The theory allows the computation of stress fields of arbitrary dislocation distributions and, coupled with minimally modified classical ($J_2$ and crystal plasticity) models for the plastic strain rate of statistical dislocations, results in a versatile model of finite deformation mesoscale plasticity. We demonstrate some capabilities of the framework by solving two outstanding challenge problems in mesoscale plasticity: 1) recover the experimentally o…
The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the trans…
Despite decades of extensive research on mechanical properties of diamond, much remains to be understood in term of plastic deformation mechanisms due to the poor deformability at room temperature. In a recent work in Advanced Materials, it was claimed that room-temperature plasticity occurred in <001>-oriented single-crystal diamond nanopillars based on observation of unrecovered deformation inside scanning electron microscope. The plastic deformation was suggested to be mediated by a phase transition from sp3 carbon to an O8-carbon phase by molecular dynamics simulations. By comparison, our …
Oxygen Vacancies at Dislocation Core Modulate Plasticity in Strontium Titanate
Ames National Laboratory（艾姆斯国家实验室）；North Carolina State University（北卡罗来纳州立大学）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Iowa State University（爱荷华州立大学）；University of Virginia（弗吉尼亚大学）
Plasticity modelling has long been based on phenomenological models based on ad-hoc assuption of constitutive relations, which are then fitted to limited data. Other work is based on the consideration of physical mechanisms which seek to establish a physical foundation of the observed plastic deformation behavior through identification of isolated defect processes ('mechanisms') which are observed either experimentally or in simulations and then serve to formulate so-called physically based models. Neither of these approaches is adequate to capture the complexity of plastic deformation which b…
Three-dimensional discrete dislocation dynamics simulations are used to study strain-controlled plastic deformation of face-centered cubic aluminium single crystals. After describing the rate and size dependence of the average stress-strain curves, we study the power-law distributed strain bursts and the average avalanche shapes, and find a universal power-law exponent $τ\approx 1.0$ for all imposed strain rates and system sizes, characterizing both the event sizes and their durations. We discuss the dependence of our results on loading rate and compare these with previous studies of strain-co…
Plastic deformation mediated by collective dislocation dynamics is investigated in the two-dimensional phase-field crystal model of sheared single crystals. We find that intermittent fluctuations in the dislocation population number accompany bursts in the plastic strain-rate fluctuations. Dislocation number fluctuations exhibit a power-law spectral density $1/f^2$ at high frequencies $f$. The probability distribution of number fluctuations becomes bimodal at low driving rates corresponding to a scenario where low density of defects alternate at irregular times with high population of defects.…
A numerical strategy to simulate plastic deformation in Mg alloys including dislocation slip and twin propagation is presented. Dislocation slip is included through a crystal plasticity model which is solved using the finite element method while twin propagation is taken into account by means of a phase field model which is solved using a fast Fourier transform algorithm. The coupled crystal plasticity and phase field equations were solved using different discretizations of the simulation domain using the same time step for both of them. The numerical strategy was used to simulate the deformat…
We present a dislocation density-based strain hardening model for single crystal copper through a systematic coarse-graining analysis of more than 200 discrete dislocation dynamics (DDD) simulations of plastic deformation under uniaxial tension. The proposed constitutive model has two components: a generalized Taylor relation connecting resolved shear stresses to dislocation densities on individual slip systems, and a generalized Kocks-Mecking model for dislocation multiplication. The DDD data strongly suggests a logarithmic dependence of flow stress on the plastic shear strain rate on each sl…
Structural transitions are invariably affected by lattice distortions. If the body is to remain crack-free, the strain field cannot be arbitrary but has to satisfy the Saint-Venant compatibility constraint. Equivalently, an incompatibility constraint consistent with the actual dislocation network has to be satisfied in media with dislocations. This constraint can be incorporated into strain-based free energy functionals to study the influence of dislocations on phase stability. We provide a systematic analysis of this constraint in three dimensions and show how three incompatibility equations …
In a recent publication, we derived the mesoscale continuum theory of plasticity for multiple-slip systems of parallel edge dislocations, motivated by the statistical-based nonlocal continuum crystal plasticity theory for single-glide due to Yefimov et al. (2004b). In this dislocation field theory (DiFT) the transport equations for both the total dislocation densities and geometrically necessary dislocation densities on each slip system were obtained from the Peach-Koehler interactions through both single and pair dislocation correlations. The effect of pair correlation interactions manifested…
A consistent, small scale description of plastic motion in a crystalline solid is presented based on a phase field description. By allowing for independent mass motion given by the phase field, and lattice distortion, the solid can remain in mechanical equilibrium on the timescale of plastic motion. Singular (incompatible) strains are determined by the phase field, to which smooth distortions are added to satisfy mechanical equilibrium. A numerical implementation of the model is presented, and used to study a benchmark problem: the motion of an edge dislocation dipole in a hexagonal lattice. T…
There is growing interest in promoting deformation twinning for plasticity in advanced materials, as highly organized twin boundaries are beneficial to better strength-ductility combination in contrast to disordered grain boundaries. Twinning deformation typically involves the kinetics of stacking faults, its interaction with dislocations, and dislocation - twin boundary interactions. While the latter has been intensively investigated, the dynamics of stacking faults has been less known. In this work, we report several new insights on the stacking fault behavior in twin induced plasticity from…
A phase field model of a crystalline material at the mesoscale is introduced to develop the necessary theoretical framework to study plastic flow due to dislocation motion. We first obtain the elastic stress from the phase field free energy and show that it obeys the stress strain relation of linear elasticity. Dislocations in a two dimensional hexagonal lattice are shown to be composite topological defects in the amplitude expansion of the phase field, with topological charges given by the Burgers vector. This allows us to introduce a formal relation between dislocation velocity and the evolu…
West Virginia University（西弗吉尼亚大学）；National Institute of Standards and Technology（美国国家标准与技术研究院）
Digital image correlation (DIC) is a well-established, non-invasive technique for tracking and quantifying the deformation of mechanical samples under strain. While it provides an obvious way to observe incremental and aggregate displacement information, it seems likely that DIC data sets, which after all reflect the spatially-resolved response of a microstructure to loads, contain much richer information than has generally been extracted from them. In this paper, we demonstrate a machine-learning approach to quantifying the prior deformation history of a crystalline sample based on its respon…
The universality class of the avalanche behavior in plastically deforming crystalline and amorphous systems has been commonly discussed, despite the fact that the microscopic defect character in each of these systems is different. In contrast to amorphous systems, crystalline flow stress increases dramatically at high strains and/or loading rates. We perform simulations of a two-dimensional discrete dislocation dynamics model that minimally captures the phenomenology of nanocrystalline deformation. In the context of this model, we demonstrate that a classic rate-dependence of dislocation plast…
Crystal plasticity is the result of the motion and interaction of dislocations. There is, however, still a major gap between microscopic and mesoscopic simulations and continuum crystal plasticity models. Only recently a higher dimensional dislocation density tensor was defined which overcomes some drawbacks of earlier dislocation density measures. The evolution equation for this tensor can be considered as a continuum version of dislocation dynamics. We use this evolution equation to develop evolution equations for the total dislocation density and an average curvature which together govern a…
The plasticity transition at the yield strength of a crystal typically signifies the tendency of dislocation defects towards relatively unrestricted motion. For an isolated dislocation the motion is in the slip plane with velocity proportional to the shear stress, while due to the long range interaction dislocation ensembles move towards satisfying emergent collective elastoplastic modes. Such collective motions have been discussed in terms of the elusively defined backstress. In this paper, we develop a two-dimensional stochastic continuum dislocation dynamics theory that clarifies the role o…
Intermittent plastic deformation in crystals with power-law behaviors has been reported in previous experimental studies. The power-law behavior is reminiscent of self-organized criticality, and mesoscopic models have been proposed that describe this behavior in crystals. In this letter, we show that intermittent plasticity in metals under tensile deformation can be observed in molecular dynamics models, using embedded atom method potentials for Ni, Cu, and Al. Power-law behaviors of stress drop and waiting time of plastic deformation events are observed. It is shown that power-law behavior is…
Crystal plasticity is mediated through dislocations, which form knotted configurations in a complex energy landscape. Once they disentangle and move, they may also be impeded by permanent obstacles with finite energy barriers or frustrating long-range interactions. The outcome of such complexity is the emergence of dislocation avalanches as the basic mechanism of plastic flow in solids at the nanoscale. While the deformation behavior of bulk materials appears smooth, a predictive model should clearly be based upon the character of these dislocation avalanches and their associated strain bursts…
Enabling plastic co-deformation of disparate phases in a laser rapid solidified Sr-modified Al-Si eutectic through partial-dislocation-mediated-plasticity in Si
We show that quasi localized low-frequency modes in the vibrational spectrum can be used to construct soft spots, or regions vulnerable to rearrangement, which serve as a universal tool for the identification of flow defects in solids. We show that soft spots not only encode spatial information, via their location, but also directional information, via directors for particles within each soft spot. Single crystals with isolated dislocations exhibit low-frequency phonon modes that localize at the core, and their polarization pattern predicts the motion of atoms during elementary dislocation gli…
Grain structure plays a key role in the mechanical properties of alloy materials. Engineering the grain structure requires a comprehensive understanding of the evolution of grain boundaries (GBs) when a material is subjected to various manufacturing processes. To this end, we present a computationally efficient framework to describe the co-evolution of bulk plasticity and GBs. We represent GBs as diffused geometrically necessary dislocations, whose evolution describes GB plasticity. Under this representation, the evolution of GBs and bulk plasticity is described in unison using the evolution e…
Solids with spatial variations in the crystalline axes naturally evolve into cells or grains separated by sharp walls. Such variations are mathematically described using the Nye dislocation density tensor. At high temperatures, polycrystalline grains form from the melt and coarsen with time: the dislocations can both climb and glide. At low temperatures under shear the dislocations (which allow only glide) form into cell structures. While both the microscopic laws of dislocation motion and the macroscopic laws of coarsening and plastic deformation are well studied, we hitherto have had no simp…
