A numerical strategy to simulate plastic deformation in Mg alloys including dislocation slip and twin propagation is presented. Dislocation slip is included through a crystal plasticity model which is solved using the finite element method while twin propagation is taken into account by means of a phase field model which is solved using a fast Fourier transform algorithm. The coupled crystal plasticity and phase field equations were solved using different discretizations of the simulation domain using the same time step for both of them. The numerical strategy was used to simulate the deformation in compression of a Mg micro-pillar along the $[10\bar{1}0]$ direction. The stress-strain curve predicted by the model as well as the dominant deformation mechanisms were in agreement with the experimental data in the literature and demonstrate the viability of the strategy to take explicitly into account twin propagation during the simulation of plastic deformation of Mg alloys. Finally, an example of slip/twin interaction in polycrystals was simulated to show the capabilities of the model.
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows maintaining extraordinarily high strength and remarkably enhanced plasticity. Underlying mechanisms featuring interaction between the segregations and mobile dislocations are discussed.
Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of Mesoscopic Field Dislocation Mechanics: Part I
A link between microstructure evolution and macroscopic response in elasto-plasticity: formulation and numerical approximation of the higher-dimensional Continuum Dislocation Dynamics theory
It is well known that diamond does not deform plastically at room temperature and usually fails in catastrophic brittle fracture. Here we demonstrate room-temperature dislocation plasticity in sub-micrometer sized diamond pillars by in-situ mechanical testing in the transmission electron microscope. We document in unprecedented details of spatio-temporal features of the dislocations introduced by the confinement-free compression, including dislocation generation and propagation. Atom-resolved observations with tomographic reconstructions show unequivocally that mixed-type dislocations with Bur…
Basal slip of a screw dislocations in hexagonal closed-packed titanium is investigated with ab initio calculations. We show that a basal dissociation is highly unstable and reconfigures to other structures dissociated in a first order pyramidal plane. The obtained mechanism for basal slip corresponds to the migration of the partial dislocations and of the associated stacking fault ribbon in a direction perpendicular to the dissocia-tion plane. Presented results indicate that both basal and pyramidal slip will operate through the Peierls mechanism of double-kink nucleation and will be equally a…
This work proposes a dislocation density-based strain gradient $J_2$ plasticity framework that models the strength contribution due to Geometrically Necessary Dislocations (GNDs) using a lower order, Taylor hardening backstress model. An anisotropy factor is introduced to phenomenologically represent the differential hardening between grains in this $J_2$ plasticity framework. An implicit numerical algorithm is implemented for the time integration of the finite deformation plasticity model. The framework is first used to predict directional hardening due to the GND-induced backstress during cy…
In an attempt to bridge the gap between atomistic and continuum plasticity simulations of hydrogen in iron, we present three dimensional discrete dislocation plasticity simulations incorporating the hydrogen elastic stress and a hydrogen dependent dislocation mobility law. The hydrogen induced stress is incorporated following the formulation derived by Gu and El-Awady (2018) which here we extend to a finite boundary value problem, a microcantilever beam, via the superposition principle. The hydrogen dependent mobility law is based on first principle calculations by Katzarov et al. (2017) and w…
Two different mechanisms have been reported in previous ab initio studies to describe basal slip in complex intermetallic Laves phases: synchroshear and undulating slip. To date, no clear answer has been given on which is the energetically favourable mechanism and whether either of them could effectively propagate as a dislocation. Using classical atomistic simulations supported by ab initio calculations, the present work removes the ambiguity and shows that the two mechanisms are, in fact, identical. Furthermore, we establish synchroshear as the mechanism for propagating dislocations within t…
In the present work, we propose a novel model coupling phase-field, dislocation density based plasticity and damage. The dislocation density governing equations are constructed based on evolutions of mobile and immobile dislocations. Mechanisms including dislocation multiplication, annihilation, mobile-immobile transfer due to dislocation interactions and block of interfaces are incorporated in the model. Especially, the "swallow-gap" problem surrounding the coarsened second phase, which often appears in dislocation and phase-field coupled simulations, is solved in the present model. Moreover,…
Plasticity in hexagonal close-packed zirconium is controlled by screw dislocations which easily glide in the prismatic planes where they are dissociated. At high enough temperatures, these dislocations can deviate out of the prism planes to also glide in the first order pyramidal and basal planes. To get a better understanding of these secondary slip systems, we have performed molecular dynamics (MD) simulations of a screw dislocation gliding in a basal plane. The gliding dislocation remains dissociated in the prism plane where it performs a random motion and occasionally cross-slips out of it…
The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the trans…
We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain prohibits easy passage for dislocation transmission. This incompatibility results in local micro-plasticity within the slipping grain, near to where the slip planes intersect the grain boundary, and we…
Plastic deformation of metals involves the complex evolution of dislocations forming strongly connected dislocation networks. These dislocation networks are based on dislocation reactions, which can form junctions during the interactions of different slip systems. Extracting the fundamentals of the network behaviour during plastic deformation by adequate physically based theories is essential for crystal plasticity models. In this work, we demonstrate how knowledge from discrete dislocation dynamics simulations to continuum-based formulations can be transferred by applying a physically based d…
Despite decades of extensive research on mechanical properties of diamond, much remains to be understood in term of plastic deformation mechanisms due to the poor deformability at room temperature. In a recent work in Advanced Materials, it was claimed that room-temperature plasticity occurred in <001>-oriented single-crystal diamond nanopillars based on observation of unrecovered deformation inside scanning electron microscope. The plastic deformation was suggested to be mediated by a phase transition from sp3 carbon to an O8-carbon phase by molecular dynamics simulations. By comparison, our …
Oxygen Vacancies at Dislocation Core Modulate Plasticity in Strontium Titanate
Ames National Laboratory（艾姆斯国家实验室）；North Carolina State University（北卡罗来纳州立大学）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Iowa State University（爱荷华州立大学）；University of Virginia（弗吉尼亚大学）
Plasticity modelling has long been based on phenomenological models based on ad-hoc assuption of constitutive relations, which are then fitted to limited data. Other work is based on the consideration of physical mechanisms which seek to establish a physical foundation of the observed plastic deformation behavior through identification of isolated defect processes ('mechanisms') which are observed either experimentally or in simulations and then serve to formulate so-called physically based models. Neither of these approaches is adequate to capture the complexity of plastic deformation which b…
Three-dimensional discrete dislocation dynamics simulations are used to study strain-controlled plastic deformation of face-centered cubic aluminium single crystals. After describing the rate and size dependence of the average stress-strain curves, we study the power-law distributed strain bursts and the average avalanche shapes, and find a universal power-law exponent $τ\approx 1.0$ for all imposed strain rates and system sizes, characterizing both the event sizes and their durations. We discuss the dependence of our results on loading rate and compare these with previous studies of strain-co…
We present a dislocation density-based strain hardening model for single crystal copper through a systematic coarse-graining analysis of more than 200 discrete dislocation dynamics (DDD) simulations of plastic deformation under uniaxial tension. The proposed constitutive model has two components: a generalized Taylor relation connecting resolved shear stresses to dislocation densities on individual slip systems, and a generalized Kocks-Mecking model for dislocation multiplication. The DDD data strongly suggests a logarithmic dependence of flow stress on the plastic shear strain rate on each sl…
A consistent, small scale description of plastic motion in a crystalline solid is presented based on a phase field description. By allowing for independent mass motion given by the phase field, and lattice distortion, the solid can remain in mechanical equilibrium on the timescale of plastic motion. Singular (incompatible) strains are determined by the phase field, to which smooth distortions are added to satisfy mechanical equilibrium. A numerical implementation of the model is presented, and used to study a benchmark problem: the motion of an edge dislocation dipole in a hexagonal lattice. T…
Zonal dislocations in Laves phases: A coupled synchro-shear slip mechanism
RWTH Aachen University（亚琛工业大学）；Ruhr University Bochum（波鸿鲁尔大学）；Max Planck Institute for Sustainable Materials（马普可持续材料研究所）；Fuyao University of Science and Technology（福耀科技大学）；Université de Lorraine（洛林大学）；Helmholtz-Zentrum Berlin für Materialien und Energie（柏林亥姆霍兹材料与能源中心）
Results of recent large-scale molecular dynamics simulations of dislocation-mediated solid plasticity are campared with predictions of the statistical thermodynamic theory of these phenomena. These computational and theoretical analyses are in substantial agreement with each other in both their descriptions of strain-rate dependent steady plastic flow and of a transient stress peak associated with initially small densities of dislocations. The comparisons between the numerical simulations and basic theory reveal inconsistencies in some conventional phenomenological descriptions of solid plasti…
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural, automotive, and armor applications due to their high strength to weight ratio, there is a need for a comprehensive understanding of deformation twinning and its interaction with dislocation slip. A great deal has been learned at the microscopic level where individual dislocations interact with twin boundaries through atomistic simulations, and at the macroscop…
Enabling plastic co-deformation of disparate phases in a laser rapid solidified Sr-modified Al-Si eutectic through partial-dislocation-mediated-plasticity in Si
