Employing density-functional theory (DFT) calculations, the generalized-stacking-fault energy (GSFE) curves along two crystallographic slips, glide and shuffle, for both pristine graphene and impurity of boron (B) or nitrogen (N) doped graphene were examined. The effects of B and N doping on the GSFE were clarified and correlated with local electron interactions and bonding configurations. The GSFE data were then used to analyze dislocation dipole and core structure, and subsequently combined with the Peierls-Nabarro (P-N) model to examine the role of doping on several key characteristics of dislocations in graphene. We showed that the GSFE curve may be significantly altered by the presence of dopants, which subsequently leads to profound modulations of dislocation properties, such as increasing spontaneous pair-annihilation distance and reducing resistance to dislocation slip. Our results indicate that doping can play an important role in controlling dislocation density and microscopic plasticity in graphene, thereby providing critical insights for dopant-mediated defect engineering in graphene.
A novel model based on the Peierls framework of dislocations is developed. The new theory can deal with a dislocation spreading at more than one slip planes. As an example, we study dislocation cross-slip and constriction process of two fcc metals, Al and Ag. The energetic parameters entering the model are determined from ab initio calculations. We find that the screw dislocation in Al can cross-slip spontaneously in contrast with that in Ag, which splits into partials and cannot cross-slip without first being constricted. The dislocation response to an external stress is examined in detail. W…
A novel semidiscrete Peierls-Nabarro model is introduced which can be used to study dislocation spreading at more than one slip planes, such as dislocation cross-slip and junctions. The strength of the model, when combined with ab initio calculations for the energetics, is that it produces essentiallyan atomistic simulation for dislocation core properties without suffering from the uncertainties associated with empirical potentials. Therefore, this method is particularly useful in providing insight into alloy design when empirical potentials are not available or not reliable for such multi-ele…
Basal slip of a screw dislocations in hexagonal closed-packed titanium is investigated with ab initio calculations. We show that a basal dissociation is highly unstable and reconfigures to other structures dissociated in a first order pyramidal plane. The obtained mechanism for basal slip corresponds to the migration of the partial dislocations and of the associated stacking fault ribbon in a direction perpendicular to the dissocia-tion plane. Presented results indicate that both basal and pyramidal slip will operate through the Peierls mechanism of double-kink nucleation and will be equally a…
In continuum models of dislocations, proper formulations of short-range elastic interactions of dislocations are crucial for capturing various types of dislocation patterns formed in crystalline materials. In this article, the continuum dynamics of straight dislocations distributed on two parallel slip planes is modelled through upscaling the underlying discrete dislocation dynamics. Two continuum velocity field quantities are introduced to facilitate the discrete-to-continuum transition. The first one is the local migration velocity of dislocation ensembles which is found fully independent of…
Two different mechanisms have been reported in previous ab initio studies to describe basal slip in complex intermetallic Laves phases: synchroshear and undulating slip. To date, no clear answer has been given on which is the energetically favourable mechanism and whether either of them could effectively propagate as a dislocation. Using classical atomistic simulations supported by ab initio calculations, the present work removes the ambiguity and shows that the two mechanisms are, in fact, identical. Furthermore, we establish synchroshear as the mechanism for propagating dislocations within t…
Plasticity in hexagonal close-packed zirconium is controlled by screw dislocations which easily glide in the prismatic planes where they are dissociated. At high enough temperatures, these dislocations can deviate out of the prism planes to also glide in the first order pyramidal and basal planes. To get a better understanding of these secondary slip systems, we have performed molecular dynamics (MD) simulations of a screw dislocation gliding in a basal plane. The gliding dislocation remains dissociated in the prism plane where it performs a random motion and occasionally cross-slips out of it…
Compared to cubic metals, whose primary slip mode includes twelve equivalent systems, the lower crystalline symmetry of hexagonal close-packed metals results in a reduced number of equivalent primary slips and anisotropy in plasticity, leading to brittleness at the ambient temperature. At higher temperatures, the ductility of hexagonal close-packed metals improves owing to the activation of secondary c+a pyramidal slip systems. Thus understanding the fundamental properties of corresponding dislocations is essential for the improvement of ductility at the ambient temperature. Here, we present t…
By means of atomistic simulations, we demonstrate that a dislocation core exhibits intermittent quasistatic restructuring during incremental shear within the same Peierls valley. This can be regarded as a stick-slip transition, which is also reproduced for a one-dimensional Frenkel-Kontorova chain under rigid boundary conditions. This occurs due to a discontinuous jump in an order parameter of the system, which signifies the extent of region forbidden for the presence of particles in the chain. The stick-slip phenomenon observed in the dislocation core is also shown to be reflected after dimen…
We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain prohibits easy passage for dislocation transmission. This incompatibility results in local micro-plasticity within the slipping grain, near to where the slip planes intersect the grain boundary, and we…
Plastic deformation of metals involves the complex evolution of dislocations forming strongly connected dislocation networks. These dislocation networks are based on dislocation reactions, which can form junctions during the interactions of different slip systems. Extracting the fundamentals of the network behaviour during plastic deformation by adequate physically based theories is essential for crystal plasticity models. In this work, we demonstrate how knowledge from discrete dislocation dynamics simulations to continuum-based formulations can be transferred by applying a physically based d…
The cross-slip process of a screw $<$a$>$ dislocation from the basal to the prismatic plane in magnesium was studied using the density functional theory and the molecular dynamics calculations. An atomistic method for calculating the total Peierls energy map has been devised to track the transition path of a dissociated and/or constricted screw $<$a$>$ dislocation in the cross-slip process. The barrier of a screw $<$a$>$ dislocation from the basal to the prismatic plane is estimated by the density functional theory for the first time to be $61.4\pm 2.0$ meV per Burgers vector length. The activ…
We present a dislocation density-based strain hardening model for single crystal copper through a systematic coarse-graining analysis of more than 200 discrete dislocation dynamics (DDD) simulations of plastic deformation under uniaxial tension. The proposed constitutive model has two components: a generalized Taylor relation connecting resolved shear stresses to dislocation densities on individual slip systems, and a generalized Kocks-Mecking model for dislocation multiplication. The DDD data strongly suggests a logarithmic dependence of flow stress on the plastic shear strain rate on each sl…
Zonal dislocations in Laves phases: A coupled synchro-shear slip mechanism
RWTH Aachen University（亚琛工业大学）；Ruhr University Bochum（波鸿鲁尔大学）；Max Planck Institute for Sustainable Materials（马普可持续材料研究所）；Fuyao University of Science and Technology（福耀科技大学）；Université de Lorraine（洛林大学）；Helmholtz-Zentrum Berlin für Materialien und Energie（柏林亥姆霍兹材料与能源中心）
Atomistic simulations, based either on an empirical interatomic potential or on ab initio calculations, are used to study the pyramidal glide of a 1/3 <1-210> screw dislocation in hexagonal close-packed zirconium. Generalized stacking fault calculations reveal a metastable stacking fault in the first order pyramidal {10-11} plane, which corresponds to an elementary pyramidal twin. This fault is at the origin of a metastable configuration of the screw dislocation in zirconium, which spontaneously appears when the dislocation glides in the pyramidal plane.
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural, automotive, and armor applications due to their high strength to weight ratio, there is a need for a comprehensive understanding of deformation twinning and its interaction with dislocation slip. A great deal has been learned at the microscopic level where individual dislocations interact with twin boundaries through atomistic simulations, and at the macroscop…
A numerical strategy to simulate plastic deformation in Mg alloys including dislocation slip and twin propagation is presented. Dislocation slip is included through a crystal plasticity model which is solved using the finite element method while twin propagation is taken into account by means of a phase field model which is solved using a fast Fourier transform algorithm. The coupled crystal plasticity and phase field equations were solved using different discretizations of the simulation domain using the same time step for both of them. The numerical strategy was used to simulate the deformat…
Due to recent successes of a statistical-based nonlocal continuum crystal plasticity theory for single-glide in explaining various aspects such as dislocation patterning and size-dependent plasticity, several attempts have been made to extend the theory to describe crystals with multiple slip systems using ad-hoc assumptions. We present here a mesoscale continuum theory of plasticity for multiple slip systems of parallel edge dislocations. We begin by constructing the Bogolyubov-Born-Green-Yvon-Kirkwood (BBGYK) integral equations relating different orders of dislocation correlation functions i…
In this paper, we present a dislocation-density-based three-dimensional continuum model, where the dislocation substructures are represented by pairs of dislocation density potential functions (DDPFs), denoted by $ϕ$ and $ψ$. The slip plane distribution is characterized by the contour surfaces of $ψ$, while the distribution of dislocation curves on each slip plane is identified by the contour curves of $ϕ$ which represents the plastic slip on the slip plane. By using DDPFs, we can explicitly write down an evolution equation system, which is shown consistent with the underlying discrete disloca…
Cross-slip is a thermally activated process by which screw dislocation changes its glide plane to another slip plane sharing the same Burgers vector. The rate at which this process happens is determined by a Boltzmann type expression that is a function of the screw segment length and the stress acting on the dislocation. In continuum dislocation dynamics (CDD), the information regarding the length of the screw dislocation segment and local stress state on dislocations are lost due to the coarse-grained representation of the density. In this work, a data driven approach to characterize the lost…
Dislocation is one of the most critical and fundamental crystal defects that dominate the mechanical behavior of crystalline solids, however, a quantitative determination of its character and property in experiments is quite challenging and limited so far. In this paper, a fully automated Peierls-Nabarro (P-N) analyzer named PNADIS is presented; a complete set of the character and property of dislocation can be automatically derived, including the dislocation core structure, Peierls energy and stress, pressure field around dislocation core, solute/dislocation interaction energy, as well as the…
Basal slip acts as a secondary deformation mode in hexagonal close-packed titanium and becomes one of the primary mechanisms in titanium alloyed with simple metals. As these solute elements also lead to a pronounced reduction of the energy of the basal stacking fault, one can hypothesize that they promote basal dissociation of dislocations which can then easily glide in the basal planes. Here, we verify the validity of this hypothesis using ab initio calculations to model the interaction of a screw dislocation with indium (In) and tin (Sn). These calculations confirm that these simple metals a…
Despite decades of extensive research on mechanical properties of diamond, much remains to be understood in term of plastic deformation mechanisms due to the poor deformability at room temperature. In a recent work in Advanced Materials, it was claimed that room-temperature plasticity occurred in <001>-oriented single-crystal diamond nanopillars based on observation of unrecovered deformation inside scanning electron microscope. The plastic deformation was suggested to be mediated by a phase transition from sp3 carbon to an O8-carbon phase by molecular dynamics simulations. By comparison, our …
The interaction between screw dislocations and oxygen interstitial atoms is studied with ab initio calculations in hexagonal close-packed titanium. Our calculations evidence a strong repulsion when the solute atoms are located in the dislocation glide plane, leading to spontaneous cross-slip, which allows the dislocation to bypass the atomic obstacle. This avoidance process explains several experimental observations in titanium in presence of oxygen: (1) a larger lattice friction against screw dislocation motion, (2) a reduction of the dislocation glide distance in prismatic planes and (3) an …
The deformation behaviour of the intermetallic Al$_{2}$Cu-phase was investigated using atomistic simulations and micropillar compression, where slip on the unexpected {211} and {022} slip planes was revealed. Additionally, all possible slip systems for the intermetallic phases were further evaluated and a preference for the activation of slip systems based on their effective interplanar distances as well as the effective Burgers vector is proposed. The effective interplanar distance corresponds to the manually determined interplanar distance, whereas the effective Burgers vector takes a potent…
The effect of slip transfer on the deformation mechanisms of Al bicrystals was explored using a rate-dependent dislocation-based crystal plasticity model. Three different types of grain boundaries (GBs) were included in the model by modifying the rate of dislocation accumulation near the GB in the Kocks-Mecking law, leading to fully-opaque (dislocation blocking), fully-transparent and partially-transparent GBs. In the latter, slip transmission is only allowed in pairs of SS in neighbour grains that are suitably oriented for slip transfer according to the Luster-Morris parameter. Modifications …
The influence of magnetism on the properties of screw dislocations in body-centered cubic chromium is investigated by means of ab initio calculations. Screw dislocations having Burgers vectors 1/2 111 and 100 are considered, following experimental observations showing activity for both slip systems. At low temperature, chromium has a magnetic order close to antiferromagnetism along 100 directions, for which 1/2 111 is not a periodicity vector. Hence, dislocations with Burgers vectors 1/2 111 generate magnetic faults when shearing the crystal, which constrain them to coexist and move pairwise, …
Alloying magnesium (Mg) with rare earth elements such as yttrium (Y) has been reported to activate the pyramidal <c + a> slip systems and improve the plasticity of Mg at room temperature. However, the origins of such dislocations and their dissociation mechanisms remain poorly understood. Here, we systematically investigate these mechanisms using dispersion-inclusive density functional theory, in combination with molecular dynamics simulations. We find that <c + a> dislocations form more readily on the pyramidal I plane than on the pyramidal II plane in Mg. The addition of Y atoms in Mg facili…
In a recent publication, we derived the mesoscale continuum theory of plasticity for multiple-slip systems of parallel edge dislocations, motivated by the statistical-based nonlocal continuum crystal plasticity theory for single-glide due to Yefimov et al. (2004b). In this dislocation field theory (DiFT) the transport equations for both the total dislocation densities and geometrically necessary dislocation densities on each slip system were obtained from the Peach-Koehler interactions through both single and pair dislocation correlations. The effect of pair correlation interactions manifested…
Dislocation core properties of Al with and without H impurities are studied using the Peierls-Nabarro model with parameters determined by ab initio calculations. We find that H not only facilitates dislocation emission from the crack tip but also enhances dislocation mobility dramatically, leading to macroscopically softening and thinning of the material ahead of the crack tip. We observe strong binding between H and dislocation cores, with the binding energy depending on dislocation character. This dependence can directly affect the mechanical properties of Al by inhibiting dislocation cross-…
The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the trans…
The stress-strain anisotropy -including both elastic properties and dislocation distributions- of crystalline systems can be studied using a dislocation model proposed by Ungár and Borbély. However this model requires fundamental parameters (i.e., contrast factors), which take into account both the elastic properties and symmetry for each system. In this study, such contrast factors were calculated from first principles for cubic slip-systems through the evaluation of the distortion tensor in a dislocation-dependent coordinate set. Moreover, a straightforward expression for the computation of …
Grain boundaries (GBs) play a fundamental role in the strengthening mechanism of crystalline structures by acting as an impediment to dislocation motion. However, the presence of an aggressive environment such as hydrogen increases the susceptibility to intergranular fracture. Further, there is a lack of systematic investigations exploring the role of hydrogen on the dislocation-grain-boundary (DGB) interactions. Thus, in this work, the effect of hydrogen on the interactions between a screw dislocation and <111> tilt GBs in α-Fe were examined. Our simulations reveal that the outcome of the DGB…
$α$-Al$_2$O$_3$ sapphire and rubies deformed by dual basal slip at intermediate temperatures (900C-1300$^\circ$C) -- II. dissociation and stacking faults
Pinning interaction between a screw dislocation and a void in fcc copper is investigated by means of molecular dynamics simulation. A screw dislocation bows out to undergo depinning on the original glide plane at low temperatures, where the behavior of the depinning stress is consistent with that obtained by a continuum model. If the temperature is higher than 300 K, the motion of a screw dislocation is no longer restricted to a single glide plane due to cross slip on the void surface. Several depinning mechanisms that involve multiple glide planes are found. In particular, a depinning mechani…
Owing to their non-planar cores 1/2<111> screw dislocations govern the plastic deformation of BCC metals. Atomistic studies of the glide of these dislocations at 0 K have been performed using Bond Order Potentials for molybdenum and tungsten that account for the mixed metallic and covalent bonding in transition metals. When applying pure shear stress in the slip direction it displays significant twinning-antitwinning asymmetry for molybdenum but not for tungsten. However, for tensile/compressive loading the Schmid law breaks down in both metals, principally due to the effect of shear stresses …
Plasticity in zirconium alloys is mainly controlled by the interaction of 1/3 1210 screw dislocations with oxygen atoms in interstitial octahedral sites of the hexagonal close-packed lattice. This process is studied here using ab initio calculations based on the density functional theory. The atomic simulations show that a strong repulsion exists only when the O atoms lie in the dislocation core and belong to the prismatic dislocation habit plane. This is a consequence of the destruction of the octahedral sites by the stacking fault arising from the dislocation dissociation. Because of the rep…
Solutions to the differential equations of linear elasticity in the continuum limit in arbitrary crystal symmetry are known only for steady-state dislocations of arbitrary character, i.e. line defects moving at constant velocity. Troubled by singularities at certain `critical' velocities (typically close to certain sound speeds), these dislocation fields are thought to be too idealized, and divergences are usually attributed to neglecting the finite size of the core and to the restriction to constant velocity. In the isotropic limit, accelerating pure screw and edge dislocations were studied s…
The plastic deformation mechanisms of tungsten carbide at room and elevated temperatures influence the wear and fracture properties of WC-Co hardmetal composite materials. The relationship between residual defect structures, including glissile and sessile dislocations and stacking faults, and the slip deformation activity, which produce slip traces, is not clear. Part 1 of this study showed that {10-10} was the primary slip plane at all measured temperatures and orientations, but secondary slip on the basal plane was activated at 600 °C, which suggests that <a> dislocations can cross-slip onto…
The effect of slip transfer on the flow strength of various FCC polycrystals was analyzed by means of computational homogenization of a representative volume element of the microstructure. The crystal behavior was governed by a physically-based crystal plasticity model in the framework of finite strains where slip transfer at grain boundaries was allowed between slip systems suitably oriented according to geometrical criteria. Conversely, slip transfer was blocked if the conditions for slip transfer were not fulfilled, leading to the formation of dislocation pile-ups. All the model parameters …
A new solution for general half-plane contact problems subject to a constant normal load together with alternating shear loads and tension in the steady state is presented. The method uses a formulation where a displacement correction is made to the fully stuck contact solution. There will be two outer regions of slip and a central permanent stick zone, which is explicitly established. Thereby, the maximum extent of the slip zones is effectively specified. Cases of small and large tension are studied, that is when the direction of slip is the same or opposing at the ends of the contact, respec…
Molecular dynamics simulations revealed significant difference in deformation behaviour of $<$100$>$ BCC Fe nanowires with and without twist boundary. The plastic deformation in perfect $<$100$>$ BCC Fe nanowire was dominated by twinning and reorientation to $<$110$>$ followed by further deformation by slip mode. On the contrary, $<$100$>$ BCC Fe nanowire with a twist boundary deformed by slip at low plastic strains followed by twinning at high strains and absence of full reorientation. The results suggest that the deformation in $<$100$>$ BCC Fe nanowire by dislocation slip is preferred over …
Cross slip of screw dislocations in crystalline solids is a stress-driven thermally activated process essential to many phenomena during plastic deformation, including dislocation pattern formation, strain hardening, and dynamic recovery. Molecular dynamics (MD) simulation has played an important role in determining the microscopic mechanisms of cross slip. However, due to its limited timescale, MD can only predict cross-slip rates in high-stress or high-temperature conditions. The transition state theory can predict the cross-slip rate over a broad range of stress and temperature conditions, …
Cellular patterns formed by self-organization of dislocations are a most conspicuous feature of dislocation microstructure evolution during plastic deformation. To elucidate the physical mechanisms underlying dislocation cell structure formation, we use a minimal model for the evolution of dislocation densities under load. By considering only two slip systems in a plane strain setting, we arrive at a model which is easily amenable to analytical stability analysis and numerical simulation. We use this model to establish analytical stability criteria for cell structures to emerge, to investigate…
The μ-phase is a common precipitation phase in superalloys and it exists in a wide composition and temperature range. As such, we study the influences of composition and temperature on its plasticity by micropillar compression tests and transmission electron microscopy. The micropillars of the μ-Co7Nb6 phase deform plastically by basal slip at either room temperature or 600 oC. At room temperature, the Co-49Nb and Co-52Nb micropillars show high yield stresses and an abrupt large strain burst at the onset of yielding regardless of orientation, whereas the Co-54Nb micropillars oriented for basal…
Although the favored glide planes in hexagonal close-packed Zr are prismatic, screw dislocations can escape their habit plane to glide in either pyramidal or basal planes. Using abinitio calculations within the nudged elastic band method, we show that, surprisingly, both events share the same thermally activated process with an unusual conservative motion of the prismatic stacking fault perpendicularly to itself. Halfway through the migration, the screw dislocation adopts a nonplanar metastable configuration with stacking faults in adjacent prismatic planes joined by a two-layer pyramidal twin…
Mg represents a group of technically important hexagonal-close packed (hcp) metals whose mechanical behaviors are very different from body-centered cubic (bcc) and face-centered cubic (fcc) metals and the underlying mechanisms remain poorly-understood. It has been long known that Mg has high hardening and low ductility, and this was conventionally attributed to the scarce of active pyramidal slip. Recently immobilization of pyramidal dislocations was proposed to be the origins. Here we present a different scenario that has hitherto never been reported for Mg: mobile screw pyramidal dislocation…
A phase field model is presented to investigate dislocation formation (coherency loss) and workhardening in two-phase binary alloys. In our model the elastic energy density is a periodic function of the shear and tetragonal strains, which allows multiple formation of slips (dislocation dipoles). By numerically integrating the dynamic equations in two dimensions, we find that dislocations appear in pairs in the interface region and grow into slips. One end of each slip glides preferentially into the softer region, while the other end remains trapped at the interface. Under uniaxial stretching a…
We analyse the equilibrium pile-up configurations of infinite periodic walls of edge dislocations which are forced against an impenetrable obstacle by a constant applied shear stress. Numerically generated density distributions exhibit two distinct regions, for each of which we provide an interpretation and an analytical prediction. Near the obstacle, the influence of neighbouring slip planes may be neglected and the classical solution for a single slip plane applies. At a larger distance a linear decay is obtained. The characteristic length scales of the two parts of the pile-up are shown to …
