The millimetre-wave spectrum provisions enormous enhancement to the achievable data rate of 5G networks. However, human blockages affecting the millimetre-wave signal can severely degrade the performance if proper resource allocation is not considered. In this paper, we assess how conventional schedulers, such as the Proportional Fair scheduler, react to the presence of blockage. Our results show that the resource allocation may disfavour users suffering from blockage, leading to low data rate for those users. To circumvent this problem, we show that the data rate of those users can be improved by using a scheduler adapted to react to upcoming blockage events. The adapted scheduler aims at proactively allocating the resources before a blockage happens, mitigating losses. Such adaptation is motivated by recent progress in blockage prediction for millimetre-wave signals in a dynamic human blockage scenario. Our extensive simulations indicate gains in the 1st percentile rate and fairness with respect to Proportional Fair scheduler when blockage conditions are severe.
The sensitivity of millimeter wave (mmWave) signals to blockages is a fundamental challenge for mobile mmWave communication systems. The sudden blockage of the line-of-sight (LOS) link between the base station and the mobile user normally leads to disconnecting the communication session, which highly impacts the system reliability. Further, reconnecting the user to another LOS base station incurs high beam training overhead and critical latency problems. In this paper, we leverage machine learning tools and propose a novel solution for these reliability and latency challenges in mmWave MIMO sy…
Predicting the millimeter wave (mmWave) beams and blockages using sub-6GHz channels has the potential of enabling mobility and reliability in scalable mmWave systems. These gains attracted increasing interest in the last few years. Prior work, however, has focused on extracting spatial channel characteristics at the sub-6GHz band first and then use them to reduce the mmWave beam training overhead. This approach has a number of limitations: (i) It still requires a beam search at mmWave, (ii) its performance is sensitive to the error associated with extracting the sub-6GHz channel characteristic…
Wireless applications that use high-reliability low-latency links depend critically on the capability of the system to predict link quality. This dependence is especially acute at the high carrier frequencies used by mmWave and THz systems, where the links are susceptible to blockages. Predicting blockages with high reliability requires a large number of data samples to train effective machine learning modules. With the aim of mitigating data requirements, we introduce a framework based on meta-learning, whereby data from distinct deployments are leveraged to optimize a shared initialization t…
The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication reliability by exploiting the spatial macro-diversity and a pessimistic estimate of rates over potential link blockage combinations. Specifically, we provide a blockage-aware algorithm for the weighte…
The 5G New Radio (NR) standard for wireless communications supports the millimetre-wave (mmWave) spectrum to yield unprecedented improvement of the access network capacity. However, intermittent blockages in the mmWave signal may degrade the system performance and lead to the under-utilisation of the allocated resources. To circumvent this problem, the transmission slot-time shall be adjusted according to the blockage condition, avoiding the resource under-utilisation. In this paper, we propose that the 5G NR flexible numerology should be applied to adapt the slot-time in order to mitigate the…
Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. This paper proposes to leverage LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they happen. This allows the network to make proactive decisions for hand-off/beam switching which enhances its reliability and latency. We formulate the LiDAR-aided blockage prediction problem and present the first real-world demonstration for LiDAR-aided blockage prediction in…
Many operators have been bullish on the role of millimeter-wave (mmWave) communications in fifth-generation (5G) mobile broadband because of its capability of delivering extreme data speeds and capacity. However, mmWave comes with challenges related to significantly high path loss and susceptibility to blockage. Particularly, when mmWave communication is applied to a mobile terminal device, communication can be frequently broken because of rampant hand blockage. Although a number of mobile phone companies have suggested configuring multiple sets of antenna modules at different locations on a m…
Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. To address this challenge, this paper leverages mmWave and LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they occur. This allows the network to make proactive decisions for hand-off/beam switching, enhancing the network reliability and latency. More specifically, this paper addresses the following key questions: (i) Can we predict a line-of-sight link blo…
Millimeter-wave systems are characterized by the use of highly directional antennas and the presence of blockages, which significantly alter the path-loss and small-scale fading parameters. The received power of each interferer depends on the direction it points and whether it is line-of-sight (LOS), non-LOS (i.e., partially blocked), or completely blocked. While interferers that are sufficiently far away will almost certainly be completely blocked, a finite number of interferers in close proximity will be subject to random partial blockages. Previous attempts to characterize mmWave networks h…
This paper investigates a novel research direction that leverages vision to help overcome the critical wireless communication challenges. In particular, this paper considers millimeter wave (mmWave) communication systems, which are principal components of 5G and beyond. These systems face two important challenges: (i) the large training overhead associated with selecting the optimal beam and (ii) the reliability challenge due to the high sensitivity to link blockages. Interestingly, most of the devices that employ mmWave arrays will likely also use cameras, such as 5G phones, self-driving vehi…
In millimeter wave (mmWave) systems, it is challenging to ensure the reliable connectivity of communications due to its sensitivity to the presence of blockages. In order to improve the robustness of the mmWave system under the presence of the random blockages, multiple reconfigurable intelligent surfaces (RISs) are deployed to enhance the spatial diversity gain, and robust beamforming is then designed based on a stochastic optimization for minimizing the maximum outage probability among multiple users to ensure the fairness. Under the stochastic optimization framework, we adopt the stochastic…
Overcoming the link blockage challenges is essential for enhancing the reliability and latency of millimeter wave (mmWave) and sub-terahertz (sub-THz) communication networks. Previous approaches relied mainly on either (i) multiple-connectivity, which under-utilizes the network resources, or on (ii) the use of out-of-band and non-RF sensors to predict link blockages, which is associated with increased cost and system complexity. In this paper, we propose a novel solution that relies only on in-band mmWave wireless measurements to proactively predict future dynamic line-of-sight (LOS) link bloc…
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user-specific latency requirements in a dynamic mobile access network. We use the Lyapunov optimization framework, and provide a dynamic control algorithm, which efficiently transforms a time-average stoc…
Millimeter wave (mmWave) technologies have the potential to achieve very high data rates, but suffer from intermittent connectivity. In this paper, we provision an architecture to integrate sub-6 GHz and mmWave technologies, where we incorporate the sub-6 GHz interface as a fallback data transfer mechanism to combat blockage and intermittent connectivity of the mmWave communications. To this end, we investigate the problem of scheduling data packets across the mmWave and sub-6 GHz interfaces such that the average delay of system is minimized. This problem can be formulated as Markov Decision P…
Mobility and blockage are two critical challenges in wireless transmission over millimeter-wave (mmWave) and Terahertz (THz) bands. In this paper, we investigate network massive multiple-input multiple-output (MIMO) transmission for mmWave/THz downlink in the presence of mobility and blockage. Considering the mmWave/THz propagation characteristics, we first propose to apply per-beam synchronization for network massive MIMO to mitigate the channel Doppler and delay dispersion effects. Accordingly, we establish a transmission model. We then investigate network massive MIMO downlink transmission …
Millimeter wave (mmWave) and sub-terahertz communication systems rely mainly on line-of-sight (LOS) links between the transmitters and receivers. The sensitivity of these high-frequency LOS links to blockages, however, challenges the reliability and latency requirements of these communication networks. In this paper, we propose to utilize radar sensors to provide sensing information about the surrounding environment and moving objects, and leverage this information to proactively predict future link blockages before they happen. This is motivated by the low cost of the radar sensors, their abi…
The objective of the Enhanced Mobile Broadband use case in 5G networks is to deliver high capacity access to densely populated areas, like city centres, transportation hubs or convention centres. Millimetre-wave communications are the go-to technology to realise that objective, yet due to weak outdoor-to-indoor penetration, outdoor deployments will not suffice and dedicated indoor deployments will be necessary. In this article, we study dense deployments of millimetre-wave access points mounted on the ceiling, with directional antennas pointing downwards to illuminate selected spots on the gro…
Reconfigurable intelligent surface (RIS) emerges as a promising technology for the next generation networks. In this paper, we utilize the tools from stochastic geometry to study the performance of a RIS-assisted millimeter wave (mmWave) cellular network. Specifically, the locations of the base stations (BSs) and the midpoints of the blockages are modeled as two independent Poisson point processes (PPP) where the blockages are modeled by line boolean model and a fraction of the blockages are coated with RISs. The distinguish characteristics of mmWave communications, i.e., the directional beamf…
Millimeter-wave (mmWave) offers high data rate and bandwidth for air-to-everything (A2X) communications including air-to-air, air-to-ground, and air-to-tower. MmWave communication in the A2X network is sensitive to buildings blockage effects. In this paper, we propose an analytical framework to define and characterise the connectivity for an aerial access point (AAP) by jointly using stochastic geometry and random shape theory. The buildings are modelled as a Boolean line-segment process with fixed height. The blocking area for an arbitrary building is derived and minimized by optimizing the a…
Ad hoc networks provide an on-demand, infrastructure-free means to communicate between soldiers in war zones, aid workers in disaster areas, or consumers in device-to-device (D2D) applications. Unfortunately, ad hoc networks are limited by interference due to nearby transmissions. Millimeter-wave (mmWave) devices offer several potential advantages for ad hoc networks including reduced interference due to directional antennas and building blockages, not to mention huge bandwidth channels for large data rates.. This paper uses a stochastic geometry approach to characterize the one-way and two-wa…
The presence of signal outage, due to shadowing and blockage, is expected to be the main bottleneck in millimeter wave (mmWave) networks. Moreover, with the anticipated vision that mmWave networks would have a dense deployment of base stations, interference from strong line-of-sight base stations increases too, thus further increasing the probability of outage. To address the issue of reducing outage, this paper explores the possibility of base station cooperation in the downlink of a mmWave heterogenous network. The main focus of this work is showing that, in a stochastic geometry framework, …
At millimeter wave (mmWave) frequencies, signals are prone to blocking by objects in the environment, which causes paths to go from line-of-sight (LOS) to non-LOS (NLOS). We consider macrodiversity as a strategy to improve the performance of mmWave cellular systems, where the user attempts to connect with two or more base stations. An accurate analysis of macrodiversity must account for the possibility of correlated blocking, which occurs when a single blockage simultaneously blocks the paths to two base stations. In this paper, we analyze the macrodiverity gain in the presence of correlated r…
Future railway is expected to accommodate both train operation services and passenger broadband services. The millimeter wave (mmWave) communication is a promising technology in providing multi-gigabit data rates to onboard users. However, mmWave communications suffer from severe propagation attenuation and vulnerability to blockage, which can be very challenging in high-speed railway (HSR) scenarios. In this paper, we investigate efficient hybrid beamforming (HBF) design for train-to-ground communications. First, we develop a two-stage HBF algorithm in blockage-free scenarios. In the first st…
This paper investigates the feasibility of mmWave frequencies for personal networks of wireless wearable devices in enclosed settings (e.g., commuter trains, subways, airplanes, airports, or offices). At these frequencies, specular reflections off surfaces are expected to contribute intended signal power and, simultaneously, to aggravate the interference at the receivers. Meanwhile, blockages by obstacles and people---including the individuals wearing the devices---are expected to shield receivers from interference. With the aid of stochastic geometry and random shape theory, we assess the int…
The highly directional beams applied in millimeter wave (mmWave) cellular networks make it possible to achieve near interference-free (NIF) transmission under judiciously designed space-time user scheduling, where the power of intra-/inter-cell interference between any two users is below a predefined threshold. In this paper, we investigate two aspects of the NIF space-time user scheduling in a multi-cell mmWave network with multi-RF-chain base stations. Firstly, given that each user has a requirement on the number of space-time resource elements, we study the NIF user scheduling problem to mi…
We consider a source that wishes to communicate with a destination at a desired rate, over a mmWave network where links are subject to blockage and nodes to failure (e.g., in a hostile military environment). To achieve resilience to link and node failures, we here explore a state-of-the-art Soft Actor-Critic (SAC) deep reinforcement learning algorithm, that adapts the information flow through the network, without using knowledge of the link capacities or network topology. Numerical evaluations show that our algorithm can achieve the desired rate even in dynamic environments and it is robust ag…
Accurate channel modeling and simulation are indispensable for millimeter-wave wideband communication systems that employ electrically-steerable and narrow beam antenna arrays. Three important channel modeling components, spatial consistency, human blockage, and outdoor-to-indoor penetration loss, were proposed in the 3rd Generation Partnership Project Release 14 for mmWave communication system design. This paper presents NYUSIM 2.0, an improved channel simulator which can simulate spatially consistent channel realizations based on the existing drop-based channel simulator NYUSIM 1.6.1. A geom…
A critical challenge for wireless communications in the millimeter wave (mmWave) bands is blockage. MmWave signals suffer significant penetration losses from many common materials and objects, and small changes in the position of obstacles in the environment can cause large variations in the channel quality. This paper provides a measurement-based study of the effects of human blockage on an end-to-end application over a mmWave cellular link. A phased array system is used to measure the channel in multiple directions almost simultaneously in a realistic indoor scenario. The measurements are in…
We propose a novel user equipment (UE) scheduling framework for millimeter-wave (mmWave) massive multiuser (MU) multiple-input multiple-output (MIMO) wireless systems. Our framework determines (sub)sets of UEs that should transmit simultaneously in a given time slot by approximately solving a nonconvex optimization problem using forward-backward splitting. Our UE scheduling framework is flexible in the sense that it (i) supports a variety of cost functions, including post-equalization mean square error and sum rate, and (ii) enables precise control over the minimum and maximum number of resour…
Rapidly fading channels caused by pedestrians in dense urban environments will have a significant impact on millimeter-wave (mmWave) communications systems that employ electrically-steerable and narrow beamwidth antenna arrays. A peer-to-peer (P2P) measurement campaign was conducted with 7-degree, 15-degree, and 60-degree half-power beamwidth (HPBW) antenna pairs at 73.5 GHz and with 1 GHz of RF null-to-null bandwidth in a heavily populated open square scenario in Brooklyn, New York, to study blockage events caused by typical pedestrian traffic. Antenna beamwidths that range approximately an o…
Due to its potential to support high data rates at low latency with reasonable interference isolation, millimeter-wave (mmWave) communications has emerged as a promising solution for wireless personal-area networks (WPAN) and an enabler for emerging applications such as high-resolution untethered virtual reality. At mmWave, signals are prone to blockage by objects in the environment, including human bodies. Most mmWave systems utilize directional antennas in order to overcome the significant path loss. In this paper, we consider the effects of blockage and antenna directivity on the performanc…
This paper analyzes the ergodic capacity of a user-centric virtual cell (VC) dense network, where multiple access points (APs) form a VC for each user equipment (UE) and transmit data cooperatively over millimeter wave (mmWave) channels. Different from traditional microwave radio communications, blockage phenomena have an important effect on mmWave transmissions. Accordingly, we adopt a distance-dependent line-of-sight (LOS) probability function and model the locations of the LOS and non-line-of-sight (NLOS) APs as two independent non-homogeneous Poisson point processes (PPP). Invoking this mo…
Millimeter-wave (mmWave) communication systems rely on large-scale antenna arrays to combat large path-loss at mmWave band. Due to hardware characteristics and deployment environments, mmWave large-scale antenna systems are vulnerable to antenna element blockages and failures, which necessitate diagnostic techniques to locate faulty antenna elements for calibration purposes. Current diagnostic techniques require full or partial knowledge of channel state information (CSI), which can be challenging to acquire in the presence of antenna failures. In this letter, we propose a blind diagnostic tec…
Millimeter wave (mmWave) bands are considered a powerful key enabler for next generation (5G) mobile networks by providing multi-Gbps data rates. However, their severe pathloss and sensitivity to blockage present challenges in practical implementation. One effective way to mitigate these effects and to increase communication range is beamforming in combination with relaying. In this paper, we focus on two typical mmWave relay networks and for each network, we propose three beam scheduling methods to approach the network information theoretic capacity. The proposed beam scheduling methods inclu…
This paper presents a novel spatially consistent approach for modeling line-of-sight (LOS) paths in vehicular networks. We use stochastic geometry to model transmitters, obstacles, and receivers located in three parallel lines, respectively. Their geometric interactions are leveraged to characterize the existence of LOS paths. Specifically, the proposed approach focuses on the role of obstacles in blocking one or more LOS paths, which has been overlooked in most statistical models for blockage. Under the proposed framework, we derive the probability that a typical vehicle is in LOS with respec…
The omnipresence of IoT devices in Industry 4.0 is expected to foster higher reliability, safety, and efficiency. However, interconnecting a large number of wireless devices without jeopardizing the system performance proves challenging. To address the requirements of future industries, we investigate the cross-layer design of beamforming and scheduling for layered-division multiplexing (LDM) systems in millimeter-wave bands. Scheduling is crucial as the devices in industrial settings are expected to proliferate rapidly. Also, highly performant beamforming is necessary to ensure scalability. B…
Millimeter-wave (mmWave) cellular systems are power-limited and susceptible to blockages. As a result, mmWave connectivity will be likely to be intermittent. One promising approach to increasing mmWave connectivity and range is to use relays. Device-to-device (D2D) communications open the door to the vast opportunities of D2D and device-to-network relaying for mmWave cellular systems. In this correspondence, we study how to select a good relay for a given source-destination pair in a two-hop mmWave cellular system, where the mmWave links are subject to random Bernoulli blockages. In such a sys…
Millimeter wave (mmWave) communications systems are promising candidate to support extremely high data rate services in future wireless networks. MmWave communications exhibit high penetration loss (blockage) and require directional transmissions to compensate for severe channel attenuations and for high noise powers. When blockage occurs, there are at least two simple prominent options: 1) switching to the conventional microwave frequencies (fallback option) and 2) using an alternative non-blocked path (relay option). However, currently it is not clear under which conditions and network param…
Millimeter-wave (mmWave) communication opens up tens of giga-hertz (GHz) spectrum in the mmWave band for use by next-generation wireless systems, thereby solving the problem of spectrum scarcity. Maintaining connectivity stands out to be a key design challenge for mmWave networks deployed in urban regions due to the blockage effect characterizing mmWave propagation. Specifically, mmWave signals can be blocked by buildings and other large urban objects. In this paper, we set out to investigate the blockage effect on the connectivity of mmWave networks in a Manhattan-type urban region modeled us…
With the explosive growth of vehicle applications, vehicular networks based on millimeter wave (mmWave) bands have attracted interests from both academia and industry. mmWave communications are able to utilize the huge available bandwidth to provide multiple Gbps transmission rates among vehicles. In this paper, we address the content distribution scheduling problem in mmWave vehicular networks. It has been challenging for all vehicles in the same network to complete content downloading due to the limited communication resources of roadside units (RSUs) and the high mobility of vehicles. We pr…
Intelligent reflecting surface (IRS) offers a cost effective solution to link blockage problem in mmWave communications, and the prerequisite of which is the accurate estimation of (1) the optimal beams for base station/access point (BS/AP) and mobile terminal (MT), (2) the optimal reflection patterns for IRSs, and (3) link blockage. In this paper, we carry out beam training design for IRSs assisted mmWave communications to estimate the aforementioned parameters. To acquire the optimal beams and reflection patterns, we firstly perform random beamforming and maximum likelihood estimation to est…
This paper studies the effect of the user hand grip on the design of beamforming codebooks for 5G millimeter-wave (mmWave) mobile handsets. The high-frequency structure simulator (HFSS) is used to characterize the radiation fields for fourteen possible handgrip profiles based on experiments we conducted. The loss from hand blockage on the antenna gains can be up to 20-25 dB, which implies that the possible hand grip profiles need to be taken into account while designing beam codebooks. Specifically, we consider three different codebook adaption schemes: a grip-aware scheme, where perfect knowl…
We consider the problem of scheduling and power allocation for the downlink of a 5G cellular system operating in the millimeter wave (mmWave) band and serving two sets of users: fix-rate (FR) users typically seen in device-to-device (D2D) communications, and variable-rate (VR) users, or high data rate services. The scheduling objective is the weighted sum-rate of both FR and VR users, and the constraints ensure that active FR users get the required rate. The weights of the objective function provide a trade-off between the number of served FR users and the resources allocated to VR users. For …
To deal with the explosive growth of mobile traffic, millimeter-wave (mmWave) communications with abundant bandwidth resources have been applied to vehicular networks. As mmWave signal is sensitive to blockage, we introduce the unmanned aerial vehicle (UAV)-aided two-way relaying system for vehicular connection enhancement and coverage expansion. How to improve transmission efficiency and to reduce latency time in such a dynamic scenario is a challenging problem. In this paper, we formulate the joint optimization problem of relay selection and transmission scheduling, aiming to reduce transmis…
Relay-aided transmission is envisioned as a key strategy to combat severe path loss and link blockages emerging as unique challenges in millimeter-wave (mmWave) communications. This work considers a relay-aided multiuser mmWave communications scenario aiming at maximizing the sum rate through optimal transmit and relay precoder design. We propose a novel joint precoder design strategy, which exploits weighted minimum mean-square error (WMMSE) using its equivalency to sum-rate maximization. We obtain closed form expressions of transmit and relay precoders, and propose to compute them through al…
In this paper, a new mathematical framework to the analysis of millimeter wave cellular networks is introduced. Its peculiarity lies in considering realistic path-loss and blockage models, which are derived from experimental data recently reported in the literature. The path-loss model accounts for different distributions for line-of-sight and non-line-of-sight propagation conditions and the blockage model includes an outage state that provides a better representation of the outage possibilities of millimeter wave communications. By modeling the locations of the base stations as points of a Po…
Industry 4.0 anticipates massive interconnectivity of industrial devices (e.g., sensors, actuators) to support factory automation and production. Due to the rigidity of wired connections to harmonize with automation, wireless information transfer has attracted substantial attention. However, existing solutions for the manufacturing sector face critical issues in coping with the key performance demands: ultra-low latency, high throughput, and high reliability. Besides, recent advancements in wireless millimeter-wave technology advocates hybrid precoding with affordable hardware and outstanding …
Millimeter wave (mmWave) holds promise as a carrier frequency for fifth generation cellular networks. Because mmWave signals are sensitive to blockage, prior models for cellular networks operated in the ultra high frequency (UHF) band do not apply to analyze mmWave cellular networks directly. Leveraging concepts from stochastic geometry, this paper proposes a general framework to evaluate the coverage and rate performance in mmWave cellular networks. Using a distance-dependent line-of-site (LOS) probability function, the locations of the LOS and non-LOS base stations are modeled as two indepen…
Blocking objects (blockages) between a transmitter and receiver cause wireless communication links to transition from line-of-sight (LOS) to non-line-of-sight (NLOS) propagation, which can greatly reduce the received power, particularly at higher frequencies such as millimeter wave (mmWave). We consider a cellular network in which a mobile user attempts to connect to two or more base stations (BSs) simultaneously, to increase the probability of at least one LOS link, which is a form of macrodiversity. We develop a framework for determining the LOS probability as a function of the number of BSs…
Millimeter-wave (mmWave) communication is one of the key enablers of the fifth-generation cellular networks (5G). However, one of the fundamental challenges of mmWave communication is the susceptibility to blockage effects. One way to alleviate this effect is the use of Intelligent Reflecting Surface (IRS). Nevertheless, due to the large number of the reflecting elements on IRS, the channel estimation turns out to be a challenging problem. This paper proposes a low-complexity channel information acquisition method for IRS-assisted mmWave communication system. Our idea consists in exploiting th…
