Many operators have been bullish on the role of millimeter-wave (mmWave) communications in fifth-generation (5G) mobile broadband because of its capability of delivering extreme data speeds and capacity. However, mmWave comes with challenges related to significantly high path loss and susceptibility to blockage. Particularly, when mmWave communication is applied to a mobile terminal device, communication can be frequently broken because of rampant hand blockage. Although a number of mobile phone companies have suggested configuring multiple sets of antenna modules at different locations on a mobile phone to circumvent this problem, identifying an optimal antenna module and a beam pair by simultaneously opening multiple sets of antenna modules causes the problem of excessive power consumption and device costs. In this study, a fast antenna and beam switching method termed Fast-ABS is proposed. In this method, only one antenna module is used for the reception to predict the best beam of other antenna modules. As such, unmasked antenna modules and their corresponding beam pairs can be rapidly selected for switching to avoid the problem of poor quality or disconnection of communications caused by hand blockage. Thorough analysis and extensive simulations, which include the derivation of relevant Cramér-Rao lower bounds, show that the performance of Fast-ABS is close to that of an oracle solution that can instantaneously identify the best beam of other antenna modules even in complex multipath scenarios. Furthermore, Fast-ABS is implemented on a software defined radio and integrated into a 5G New Radio physical layer. Over-the-air experiments reveal that Fast-ABS can achieve efficient and seamless connectivity despite hand blockage.
The sensitivity of millimeter wave (mmWave) signals to blockages is a fundamental challenge for mobile mmWave communication systems. The sudden blockage of the line-of-sight (LOS) link between the base station and the mobile user normally leads to disconnecting the communication session, which highly impacts the system reliability. Further, reconnecting the user to another LOS base station incurs high beam training overhead and critical latency problems. In this paper, we leverage machine learning tools and propose a novel solution for these reliability and latency challenges in mmWave MIMO sy…
Predicting the millimeter wave (mmWave) beams and blockages using sub-6GHz channels has the potential of enabling mobility and reliability in scalable mmWave systems. These gains attracted increasing interest in the last few years. Prior work, however, has focused on extracting spatial channel characteristics at the sub-6GHz band first and then use them to reduce the mmWave beam training overhead. This approach has a number of limitations: (i) It still requires a beam search at mmWave, (ii) its performance is sensitive to the error associated with extracting the sub-6GHz channel characteristic…
Wireless applications that use high-reliability low-latency links depend critically on the capability of the system to predict link quality. This dependence is especially acute at the high carrier frequencies used by mmWave and THz systems, where the links are susceptible to blockages. Predicting blockages with high reliability requires a large number of data samples to train effective machine learning modules. With the aim of mitigating data requirements, we introduce a framework based on meta-learning, whereby data from distinct deployments are leveraged to optimize a shared initialization t…
The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication reliability by exploiting the spatial macro-diversity and a pessimistic estimate of rates over potential link blockage combinations. Specifically, we provide a blockage-aware algorithm for the weighte…
Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. This paper proposes to leverage LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they happen. This allows the network to make proactive decisions for hand-off/beam switching which enhances its reliability and latency. We formulate the LiDAR-aided blockage prediction problem and present the first real-world demonstration for LiDAR-aided blockage prediction in…
Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. To address this challenge, this paper leverages mmWave and LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they occur. This allows the network to make proactive decisions for hand-off/beam switching, enhancing the network reliability and latency. More specifically, this paper addresses the following key questions: (i) Can we predict a line-of-sight link blo…
This paper investigates a novel research direction that leverages vision to help overcome the critical wireless communication challenges. In particular, this paper considers millimeter wave (mmWave) communication systems, which are principal components of 5G and beyond. These systems face two important challenges: (i) the large training overhead associated with selecting the optimal beam and (ii) the reliability challenge due to the high sensitivity to link blockages. Interestingly, most of the devices that employ mmWave arrays will likely also use cameras, such as 5G phones, self-driving vehi…
The millimetre-wave spectrum provisions enormous enhancement to the achievable data rate of 5G networks. However, human blockages affecting the millimetre-wave signal can severely degrade the performance if proper resource allocation is not considered. In this paper, we assess how conventional schedulers, such as the Proportional Fair scheduler, react to the presence of blockage. Our results show that the resource allocation may disfavour users suffering from blockage, leading to low data rate for those users. To circumvent this problem, we show that the data rate of those users can be improve…
In millimeter wave (mmWave) systems, it is challenging to ensure the reliable connectivity of communications due to its sensitivity to the presence of blockages. In order to improve the robustness of the mmWave system under the presence of the random blockages, multiple reconfigurable intelligent surfaces (RISs) are deployed to enhance the spatial diversity gain, and robust beamforming is then designed based on a stochastic optimization for minimizing the maximum outage probability among multiple users to ensure the fairness. Under the stochastic optimization framework, we adopt the stochastic…
Overcoming the link blockage challenges is essential for enhancing the reliability and latency of millimeter wave (mmWave) and sub-terahertz (sub-THz) communication networks. Previous approaches relied mainly on either (i) multiple-connectivity, which under-utilizes the network resources, or on (ii) the use of out-of-band and non-RF sensors to predict link blockages, which is associated with increased cost and system complexity. In this paper, we propose a novel solution that relies only on in-band mmWave wireless measurements to proactively predict future dynamic line-of-sight (LOS) link bloc…
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user-specific latency requirements in a dynamic mobile access network. We use the Lyapunov optimization framework, and provide a dynamic control algorithm, which efficiently transforms a time-average stoc…
Ground-to-air (GA) communication using unmanned aerial vehicles (UAVs) has gained popularity in recent years and is expected to be part of 5G networks and beyond. However, the GA links are susceptible to frequent blockages at millimeter wave (mmWave) frequencies. During a link blockage, the channel information cannot be obtained reliably. In this work, we provide a novel method of channel prediction during the GA link blockage at 28 GHz. In our approach, the multipath components (MPCs) along a UAV flight trajectory are arranged into independent path bins based on the minimum Euclidean distance…
Mobility and blockage are two critical challenges in wireless transmission over millimeter-wave (mmWave) and Terahertz (THz) bands. In this paper, we investigate network massive multiple-input multiple-output (MIMO) transmission for mmWave/THz downlink in the presence of mobility and blockage. Considering the mmWave/THz propagation characteristics, we first propose to apply per-beam synchronization for network massive MIMO to mitigate the channel Doppler and delay dispersion effects. Accordingly, we establish a transmission model. We then investigate network massive MIMO downlink transmission …
Human blockage is one of the main challenges for mmWave communication networks in dynamic environments. The shadowing by a human body results in significant received power degradation and could occur abruptly and frequently. A shadowing period of hundred milliseconds might interrupt the communication and cause significant data loss, considering the huge bandwidth utilized in mmWave communications. An even longer shadowing period might cause a long-duration link outage. Therefore, a blockage prediction mechanism has to be taken to detect the moving blocker within the vicinity of mmWave links. B…
Millimeter wave (mmWave) and sub-terahertz communication systems rely mainly on line-of-sight (LOS) links between the transmitters and receivers. The sensitivity of these high-frequency LOS links to blockages, however, challenges the reliability and latency requirements of these communication networks. In this paper, we propose to utilize radar sensors to provide sensing information about the surrounding environment and moving objects, and leverage this information to proactively predict future link blockages before they happen. This is motivated by the low cost of the radar sensors, their abi…
The objective of the Enhanced Mobile Broadband use case in 5G networks is to deliver high capacity access to densely populated areas, like city centres, transportation hubs or convention centres. Millimetre-wave communications are the go-to technology to realise that objective, yet due to weak outdoor-to-indoor penetration, outdoor deployments will not suffice and dedicated indoor deployments will be necessary. In this article, we study dense deployments of millimetre-wave access points mounted on the ceiling, with directional antennas pointing downwards to illuminate selected spots on the gro…
The susceptibility of millimeter-wave (mmWave) signals to physical blockage and abrupt signal strength variations presents a challenge to reliable 5G communication. This work proposes and examines the feasibility of utilizing lower-frequency signals as early-warning indicators of mobile mmWave signal blockage or recovery. A physics-based channel simulation tool incorporating Fresnel diffraction and image sources is employed to demonstrate that sub-6 GHz signals "lead" mmWave signals in reaching a specific signal-strength threshold by several to tens of milliseconds at mobile speeds, suggesting…
In this paper, a new framework for optimizing the resource allocation in a millimeter-wave-non-orthogonal multiple access (mmWave-NOMA) communication for crowded venues is proposed. MmWave communications suffer from severe blockage caused by obstacles such as the human body, especially in a dense region. Thus, a detailed method for modeling the blockage events in the in-venue scenarios is introduced. Also, several mmWave access points are considered in different locations. To maximize the network sum rate, the resource allocation problem is formulated as a mixed integer non-linear programming,…
In this letter, the mmAlert system, predicting millimeter wave (mmWave) link blockage during data communication, is elaborated and demonstrated. The passive sensing method is adopted for mobile blocker detection, where two receive beams with separated radio frequency (RF) chains are equipped at the data communication receiver. One receive beam is aligned to the direction of line-of-sight (LoS) path, and the other one periodically sweeps the region close to the LoS path. By comparing the signals received by the above two beams, the Doppler frequencies of the signal scattered from the mobile blo…
At millimeter wave (mmWave) frequencies, signals are prone to blocking by objects in the environment, which causes paths to go from line-of-sight (LOS) to non-LOS (NLOS). We consider macrodiversity as a strategy to improve the performance of mmWave cellular systems, where the user attempts to connect with two or more base stations. An accurate analysis of macrodiversity must account for the possibility of correlated blocking, which occurs when a single blockage simultaneously blocks the paths to two base stations. In this paper, we analyze the macrodiverity gain in the presence of correlated r…
Future railway is expected to accommodate both train operation services and passenger broadband services. The millimeter wave (mmWave) communication is a promising technology in providing multi-gigabit data rates to onboard users. However, mmWave communications suffer from severe propagation attenuation and vulnerability to blockage, which can be very challenging in high-speed railway (HSR) scenarios. In this paper, we investigate efficient hybrid beamforming (HBF) design for train-to-ground communications. First, we develop a two-stage HBF algorithm in blockage-free scenarios. In the first st…
Millimeter wave (mmWave) communication is a key component of 5G and beyond. Harvesting the gains of the large bandwidth and low latency at mmWave systems, however, is challenged by the sensitivity of mmWave signals to blockages; a sudden blockage in the line of sight (LOS) link leads to abrupt disconnection, which affects the reliability of the network. In addition, searching for an alternative base station to re-establish the link could result in needless latency overhead. In this paper, we address these challenges collectively by utilizing machine learning to anticipate dynamic blockages pro…
Fifth generation (5G) wireless technology is expected to utilize highly directive antennas at millimeter wave (mmWave) spectrum to offer higher data rates. However, given the high directivity of antennas and adverse propagation characteristics at mmWave frequencies, these signals are very susceptible to obstacles. One of the important factors that are highly impacted is interference behavior. In fact, signals received from other terminals can be easily blocked or attenuated at the receiver. In addition, higher number of terminals can transmit signals without introducing much interference and h…
With the overcrowded sub-6 GHz bands, millimeter wave (mmWave) bands offer a promising alternative for the next generation wireless standard, i.e., 5G. However, the susceptibility of mmWave signals to severe pathloss and shadowing requires the use of highly directional antennas to overcome such adverse characteristics. Building a network with directional beams changes the interference behavior, since, narrow beams are vulnerable to blockages. Such sensitivity to blockages causes uncertainty in the active interfering node locations. Configuration uncertainty may also manifest in the spectral do…
Accurate channel modeling and simulation are indispensable for millimeter-wave wideband communication systems that employ electrically-steerable and narrow beam antenna arrays. Three important channel modeling components, spatial consistency, human blockage, and outdoor-to-indoor penetration loss, were proposed in the 3rd Generation Partnership Project Release 14 for mmWave communication system design. This paper presents NYUSIM 2.0, an improved channel simulator which can simulate spatially consistent channel realizations based on the existing drop-based channel simulator NYUSIM 1.6.1. A geom…
In this paper, we propose an environment semantics aided wireless communication framework to reduce the transmission latency and improve the transmission reliability, where semantic information is extracted from environment image data, selectively encoded based on its task-relevance, and then fused to make decisions for channel related tasks. As a case study, we develop an environment semantics aided network architecture for mmWave communication systems, which is composed of a semantic feature extraction network, a feature selection algorithm, a task-oriented encoder, and a decision network. W…
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization capabilities. The reliability of mmWave links may be compromised due to difficulties in beam alignment for mobile channels and due to blocking effects between a mmWave transmitter and a receiver. In this paper, we study the channel characteristics for mmWave and sub-6 GHz V2X communications using ray-tracing simulations. We present results for time-varying path…
Vehicle-to-Everything (V2X) communications are revolutionizing the connectivity of transportation systems supporting safe and efficient road mobility. To meet the growing bandwidth eagerness of V2X services, millimeter-wave (e.g., 5G new radio over spectrum 26.50 - 48.20 GHz) and sub-THz (e.g., 120 GHz) frequencies are being investigated for the large available spectrum. Communication at these frequencies requires beam-type connectivity as a solution for the severe path loss attenuation. However, beams can be blocked, with negative consequences for communication reliability. Blockage predictio…
This paper provides the first real-world evaluation of using visual (RGB camera) data and machine learning for proactively predicting millimeter wave (mmWave) dynamic link blockages before they happen. Proactively predicting line-of-sight (LOS) link blockages enables mmWave/sub-THz networks to make proactive network management decisions, such as proactive beam switching and hand-off) before a link failure happens. This can significantly enhance the network reliability and latency while efficiently utilizing the wireless resources. To evaluate this gain in reality, this paper (i) develops a com…
Millimeter-wave (mmWave) communication systems require narrow beams to increase communication range. If the dominant communication direction is blocked by an obstacle, an alternative and reliable spatial communication path should be quickly identified to maintain connectivity. In this paper, we introduce a new metric to quantify the effective multipath richness (EMR) of a directional communication channel by considering the strength and spatial diversity of the resolved paths, while also taking into account beamwidth and blockage characteristics. The metric is defined as a weighted sum of the …
Joint Communication and Sensing (JCAS) is envisioned for 6G cellular networks, where sensing the operation environment, especially in presence of humans, is as important as the high-speed wireless connectivity. Sensing, and subsequently recognizing blockage types, is an initial step towards signal blockage avoidance. In this context, we investigate the feasibility of using human motion recognition as a surrogate task for blockage type recognition through a set of hypothesis validation experiments using both qualitative and quantitative analysis (visual inspection and hyperparameter tuning of d…
The millimeter wave (mmWave) frequencies offer the potential for enormous capacity wireless links. However, designing robust communication systems at these frequencies requires that we understand the channel dynamics over both time and space: mmWave signals are extremely vulnerable to blocking and the channel can thus rapidly appear and disappear with small movement of obstacles and reflectors. In rich scattering environments, different paths may experience different blocking trajectories and understanding these multi-path blocking dynamics is essential for developing and assessing beamforming…
A fundamental challenge for millimeter wave (mmWave) communications lies in its sensitivity to the presence of blockages, which impact the connectivity of the communication links and ultimately the reliability of the entire network. In this paper, we analyze a reconfigurable intelligent surface (RIS)-aided mmWave communication system for enhancing the network reliability and connectivity in the presence of random blockages. To enhance the robustness of hybrid analog-digital beamforming in the presence of random blockages, we formulate a stochastic optimization problem based on the minimization…
Intelligent reflecting surface (IRS) offers a cost effective solution to link blockage problem in mmWave communications, and the prerequisite of which is the accurate estimation of (1) the optimal beams for base station/access point (BS/AP) and mobile terminal (MT), (2) the optimal reflection patterns for IRSs, and (3) link blockage. In this paper, we carry out beam training design for IRSs assisted mmWave communications to estimate the aforementioned parameters. To acquire the optimal beams and reflection patterns, we firstly perform random beamforming and maximum likelihood estimation to est…
Recently, intelligent reflecting surface (IRS) assisted mmWave networks are emerging, which bear the potential to address the blockage issue of the millimeter wave (mmWave) communication in a more cost-effective way. In particular, IRS is built by passive and programmable electromagnetic elements that can manipulate the mmWave propagation channel into a more favorable condition that is free of blockage via judicious joint BS-IRS transmission design. However, the coexistence of IRSs and mmWave BSs complicates the network architecture, and thus poses great challenges for efficient beam managemen…
Intelligent reflecting surface (IRS) has been considered as a promising technology to alleviate the blockage effect and enhance coverage in millimeter wave (mmWave) communication. To explore the impact of IRS on the performance of mmWave communication, we investigate a multi-IRS assisted mmWave communication network and formulate a sum rate maximization problem by jointly optimizing the active and passive beamforming and the set of IRSs for assistance. The optimization problem is intractable due to the lack of convexity of the objective function and the binary nature of the IRS selection varia…
Millimeter wave (mmWave) bands have been utilized for the fifth generation (5G) communication systems and will no doubt continue to be deployed for beyond 5G (B5G). However, the underlying channels are not fully investigated at multifrequency bands and in multi-scenarios by using the same channel sounder, especially for the outdoor, multiple-input multiple-output (MIMO), and vehicle-to-vehicle (V2V) conditions. In this paper, we conduct multi-frequency multi-scenario mmWave MIMO channel measurements with 4*4 antennas at 28, 32, and 39 GHz bands for three cases, i.e., the human body and vehicle…
Vision-aided wireless communication is motivated by the recent advances in deep learning and computer vision as well as the increasing dependence on line-of-sight links in millimeter wave (mmWave) and terahertz systems. By leveraging vision, this new research direction enables an interesting set of new capabilities such as vision-aided mmWave beam and blockage prediction, proactive hand-off, and resource allocation among others. These capabilities have the potential of reliably supporting highly-mobile applications such as vehicular/drone communications and wireless virtual/augmented reality i…
Terahertz (THz) wireless access is considered as a next step towards sixth generation (6G) cellular systems. By utilizing even higher frequency bands than 5G millimeter wave (mmWave) New Radio (NR), they will operate over extreme bandwidth delivering unprecedented rates at the access interface. However, by relying upon pencil-wide beams, these systems will not only inherit mmWave propagation challenges such as blockage phenomenon but introduce their own issues associated with micromobility of user equipment (UE). In this paper, we analyze and compare user association schemes and multi-connecti…
Discontinuous reception (DRX), where a user equip-ment (UE) temporarily disables its receiver, is a critical power saving feature in modern cellular systems. DRX is likely tobe particularly aggressively used in the mmWave and THzfrequencies due to the high front end power consumption. A keychallenge of DRX in these frequencies is that individual links are directional and highly susceptible to blockage. MmWave and THz UEs will therefore likely need to monitor multiple cells in multiple directions to ensure continuous reliable connectivity.This work proposes a novel, heuristic algorithm to dynam…
Communication in the millimeter-wave (mmWave) band has recently been proposed to enable giga-bit-per-second data rates for next generation wireless systems. Physical layer security techniques have emerged as a simple and yet effective way to safeguard these systems against eavesdropping attacks. These techniques make use of the large antenna arrays available in mmWave systems to provide an array gain at the target receiver and degrade the signal quality at the eavesdropper. Despite their effectiveness, majority of these techniques are based on line-of-sight communication links between the tran…
