Millimeter wave (mmWave) bands are considered a powerful key enabler for next generation (5G) mobile networks by providing multi-Gbps data rates. However, their severe pathloss and sensitivity to blockage present challenges in practical implementation. One effective way to mitigate these effects and to increase communication range is beamforming in combination with relaying. In this paper, we focus on two typical mmWave relay networks and for each network, we propose three beam scheduling methods to approach the network information theoretic capacity. The proposed beam scheduling methods include the deterministic horizontal continuous edge coloring (HC-EC) scheduler, the adaptive back pressure (BP) scheduler and the adaptive low-delay new back pressure (newBP) scheduler. With the aid of computer simulations, we show that within the network capacity range, the proposed schedulers provide good guarantees for the network stability, meanwhile achieve very low packet end-to-end delay.
We study the performance of random linear network coding for time division duplexing channels with Poisson arrivals. We model the system as a bulk-service queue with variable bulk size. A full characterization for random linear network coding is provided for time division duplexing channels [1] by means of the moment generating function. We present numerical results for the mean number of packets in the queue and consider the effect of the range of allowable bulk sizes. We show that there exists an optimal choice of this range that minimizes the mean number of data packets in the queue.
The potential of doubling the spectrum efficiency of full-duplex (FD) transmission motivates us to investigate FD millimeter-wave (FD-mmWave) communication. To realize FD transmission in the mmWave band, we first introduce possible antenna configurations for FD-mmWave transmission. It is shown that, different from the cases in micro-wave band FD communications, the configuration with separate Tx/Rx antenna arrays appears more flexible in self-interference (SI) suppression while it may increase some cost and area versus that with the same array. We then model the mmWave SI channel with separate…
A fine-grained analysis of network performance is crucial for system design. In this paper, we focus on the meta distribution of the signal-to-interference-plus-noise-ratio (SINR) in the mmWave heterogeneous networks where the base stations (BS) in each tier are modeled as a Poisson point process (PPP). By utilizing stochastic geometry and queueing theory, we characterize the spatial and temporal randomness while the special characteristics of mmWave communications, including different path loss laws for line-of-sight and non-line-of-sight links and directional beamforming, are incorporated in…
In this paper, we investigate network-assisted full-duplex (NAFD) cell-free millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems with digital-to-analog converter (DAC) quantization and fronthaul compression. We propose to maximize the weighted uplink and downlink sum rate by jointly optimizing the power allocation of both the transmitting remote antenna units (T-RAUs) and uplink users and the variances of the downlink and uplink fronthaul compression noises. To deal with this challenging problem, we further apply a successive convex approximation (SCA) method to handl…
The millimeter wave (mmWave) communication has drawn intensive attention with abundant band resources. In this paper, we consider the popular content distribution (PCD) problem in the mmWave vehicular network. In order to offload the communication burden of base stations (BSs), vehicle-to-vehicle (V2V) communication is introduced into the PCD problem to transmit contents between on-board units (OBUs) and improve the transmission efficiency. We propose a full-duplex (FD) cooperative scheme based on coalition formation game, and the utility function is provided based on the maximization of the n…
Millimeter wave (mmWave) full-duplex (FD) is a promising technique for improving capacity by maximizing the utilization of both time and the rich mmWave frequency resources. Still, it has restrictions due to FD self-interference (SI) and mmWave's limited coverage. Therefore, this study dives into FD mmWave MIMO with the assistance of reconfigurable intelligent surfaces (RIS) for capacity improvement. First, we demonstrate the angular-domain reciprocity of FD antenna arrays under the far-field planar wavefront assumption. Accordingly, a strategy for joint downlink-uplink (DL-UL) channel estimat…
The small cells in millimeter wave (mmWave) have been utilized extensively for the fifth generation (5G) mobile networks. And full-duplex (FD) communications become possible with the development of self-interference (SI) cancellation technology. In this paper, we focus on the optimal allocation of the sub-channels in the small cells deployed densely underlying the mmWave networks. In order to improve the resource utilization and network capacity, device-to-device (D2D) communications are adopted in networks. For maximizing the system throughput, we propose a cooperative sub-channel allocation …
One of the key technologies for the future cellular networks is full duplex (FD)-enabled integrated access and backhaul (IAB) networks operating in the millimeter-wave (mmWave) frequencies. The main challenge in realizing FD-IAB networks is mitigating the impact of self-interference (SI) in the wideband mmWave frequencies. In this article, we first introduce the 3GPP IAB network architectures and wideband mmWave channel models. By utilizing the subarray-based hybrid precoding scheme at the FD-IAB node, multiuser interference is mitigated using zero-forcing at the transmitter, whereas the resid…
Full Duplex (FD) radio has emerged as a promising solution to increase the data rates by up to a factor of two via simultaneous transmission and reception in the same frequency band. This paper studies a novel hybrid beamforming (HYBF) design to maximize the weighted sum-rate (WSR) in a single-cell millimeter wave (mmWave) massive multiple-input-multiple-output (mMIMO) FD system. Motivated by practical considerations, we assume that the multi-antenna users and hybrid FD base station (BS) suffer from the limited dynamic range (LDR) noise due to non-ideal hardware and an impairment aware HYBF ap…
In this work, we analyze the probabilistic cooperation of a full-duplex relay in a multiuser random-access network. The relay is equipped with on/off modes for the receiver and the transmitter independently. These modes are modeled as probabilities by which the receiver and the transmitter are activated. We provide analytical expressions for the performance of the relay queue, such as arrival and service rates, stability conditions, and the average queue size. We optimize the relay's operation setup to maximize the network-wide throughput while, simultaneously, we keep the relay's queue stable…
In this work, the achievable rate of three-node relay systems with selection relaying under statistical delay constraints, imposed on the limitations of the maximum end-to-end delay violation probabilities, is investigated. It is assumed that there are queues of infinite size at both the source and relay node, and the source can select the relay or destination for data reception. Given selection relaying policy, the effective bandwidth of the arrival processes of the queue at the relay is derived. Then, the maximum constant arrival rate can be identified as the maximum effective capacity as a …
The effect of full-duplex cooperative relaying in a random access multiuser network is investigated here. First, we model the self-interference incurred due to full-duplex operation, assuming multi-packet reception capabilities for both the relay and the destination node. Traffic at the source nodes is considered saturated and the cooperative relay, which does not have packets of its own, stores a source packet that it receives successfully in its queue when the transmission to the destination has failed. We obtain analytical expressions for key performance metrics at the relay, such as arriva…
Recent applications of the Full Duplex (FD) technology focus on enabling simultaneous control communication and data transmission to reduce the control information exchange overhead, which impacts end-to-end latency and spectral efficiency. In this paper, we present a simultaneous direction estimation and data transmission scheme for millimeter Wave (mmWave) massive Multiple-Input Multiple-Output (MIMO) systems, enabled by a recent FD MIMO technology with reduced hardware complexity Self-Interference (SI) cancellation. We apply the proposed framework in the mmWave analog beam management proble…
Integrated access and backhaul (IAB) facilitates cost-effective deployment of millimeter wave(mmWave) cellular networks through multihop self-backhauling. Full-duplex (FD) technology, particularly for mmWave systems, is a potential means to overcome latency and throughput challenges faced by IAB networks. We derive practical and tractable throughput and latency constraints using queueing theory and formulate a network utility maximization problem to evaluate both FD-IAB and half-duplex(HD)-IAB networks. We use this to characterize the network-level improvements seen when upgrading from convent…
In this paper, we consider the performance of a random-access time-slotted wireless network with a single access point and a mix of half- and full- duplex stations. Full-duplex transmissions involve data transmitted simultaneously in both directions, and this influences the dynamics of the queue at the access point. Given the probabilities of channel access by the nodes, this paper provides generalized analytical formulations for the throughputs for each station. Special cases related to a 802.11 DCA based system as well as a full-fairness system are discussed, which provide insights into the …
In this paper, we propose a novel policy for device caching that facilitates popular content exchange through high-rate device-to-device (D2D) millimeter-wave (mmWave) communication. The D2D-aware caching (DAC) policy splits the cacheable content into two content groups and distributes it randomly to the user equipment devices (UEs), with the goal to enable D2D connections. By exploiting the high bandwidth availability and the directionality of mmWaves, we ensure high rates for the D2D transmissions, while mitigating the co-channel interference that limits the throughput gains of D2D communica…
With the explosive growth of vehicle applications, vehicular networks based on millimeter wave (mmWave) bands have attracted interests from both academia and industry. mmWave communications are able to utilize the huge available bandwidth to provide multiple Gbps transmission rates among vehicles. In this paper, we address the content distribution scheduling problem in mmWave vehicular networks. It has been challenging for all vehicles in the same network to complete content downloading due to the limited communication resources of roadside units (RSUs) and the high mobility of vehicles. We pr…
Ultra-reliability and low-latency are two key components in 5G networks. In this letter, we investigate the problem of ultra-reliable and low-latency communication (URLLC) in millimeter wave (mmWave)-enabled massive multiple-input multiple-output (MIMO) networks. The problem is cast as a network utility maximization subject to probabilistic latency and reliability constraints. To solve this problem, we resort to the Lyapunov technique whereby a utility-delay control approach is proposed, which adapts to channel variations and queue dynamics. Numerical results demonstrate that our proposed appr…
Initial deployments of millimeter wave (mmWave) cellular networks are likely to be enabled with self-backhauling. In this work, we propose a random spatial model to analyze uplink (UL) and downlink (DL) SINR distribution and mean rates corresponding to different access-backhaul and UL-DL resource allocation schemes in a self-backhauled mmWave cellular network with Poisson point process (PPP) deployment of users and base stations. In particular, we focus on heuristic implementations of static and dynamic time division duplexing (TDD) for access links with synchronized or unsynchronized access-b…
Multiple-input multiple-output (MIMO) millimeter wave (mmWave) communication is a key technology for next generation wireless networks. One of the consequences of utilizing a large number of antennas with an increased bandwidth is that array steering vectors vary among different subcarriers. Due to this effect, known as beam squint, the conventional channel model is no longer applicable for mmWave massive MIMO systems. In this paper, we study channel estimation under the resulting non-standard model. To that aim, we first analyze the beam squint effect from an array signal processing perspecti…
Full-duplex (FD) transmission in a point-to-point (P2P) link, wherein bidirectional traffic flows simultaneously share the same spectrum, has the capability of doubling the link rate by completely removing self-interferences. However, the rate gain of FD transmission in an interference-limited network is not as clear as a P2P link due to the interferences induced by complex FD and half-duplex (HD) transmission behaviors in the network. To thoroughly investigate the achievable link rates of users and base stations (BSs) in a heterogeneous network (HetNet) with decoupled user association, a gene…
With the increasing scale of antenna arrays in wideband millimeter-wave (mmWave) communications, the physical propagation delays of electromagnetic waves traveling across the whole array will become large and comparable to the time-domain sample period, which is known as the spatial-wideband effect. In this case, different subcarriers in an orthogonal frequency division multiplexing (OFDM) system will "see" distinct angles of arrival (AoAs) for the same path. This effect is known as beam squint, resulting from the spatial-wideband effect, and makes the approaches based on the conventional mult…
Rail transportation, especially, high-speed rails (HSR), is an important infrastructure for the development of national economy and the promotion of passenger experience. Due to the large bandwidth, millimeter wave (mmWave) communication is regarded as a promising technology to meet the demand of high data rates. However, since mmWave communication has the characteristic of high attenuation, mobile relay (MR) is considered in this paper. Also, full-duplex (FD) communications have been proposed to improve the spectral efficiency. However, because of the high speed, as well as the problem of pen…
In this paper, the problem of uplink (UL) and downlink (DL) resource optimization, mode selection and power allocation is studied for wireless cellular networks under the assumption of in-band full duplex (IBFD) base stations, non-orthogonal multiple access (NOMA) operation, and queue stability constraints. The problem is formulated as a network utility maximization problem for which a Lyapunov framework is used to decompose it into two disjoint subproblems of auxiliary variable selection and rate maximization. The latter is further decoupled into a user association and mode selection (UAMS) p…
Millimeter-wave (mmWave) radar is widely used in vehicles for applications such as adaptive cruise control and collision avoidance. In this paper, we propose an IEEE 802.11ad-based radar for long-range radar (LRR) applications at the 60 GHz unlicensed band. We exploit the preamble of a single-carrier (SC) physical layer (PHY) frame, which consists of Golay complementary sequences with good correlation properties, as a radar waveform. This system enables a joint waveform for automotive radar and a potential mmWave vehicular communication system based on IEEE 802.11ad, allowing hardware reuse. T…
In this paper, we revisit the stability region of a cellular time division duplex (TDD) network. We characterize the queuing stability region of a network model that consists of two types of communications: (i) users communicating with the base station and (ii) users communicating with each other by passing through the base station. When a communication passes through the base station (BS) then a packet cannot be delivered to the destination UE until it is first received by the BS queue from the source UE. Due to the relaying functionality at the BS level, a coupling is created between the que…
University of Utah（犹他大学）；Idaho National Laboratory（爱达荷国家实验室）
We consider the problem of distributed downlink beam scheduling and power allocation for millimeter-Wave (mmWave) cellular networks where multiple base stations (BSs) belonging to different service operators share the same unlicensed spectrum with no central coordination or cooperation among them. Our goal is to design efficient distributed beam scheduling and power allocation algorithms such that the network-level payoff, defined as the weighted sum of the total throughput and a power penalization term, can be maximized. To this end, we propose a distributed scheduling approach to power alloc…
In this paper, we consider a simple network consisting of a source, a half-duplex decode-and-forward relay, and a destination. We propose a new relaying protocol employing adaptive link selection, i.e., in any given time slot, based on the channel state information of the source-relay and the relay-destination link a decision is made whether the source or the relay transmits. In order to avoid data loss at the relay, adaptive link selection requires the relay to be equipped with a buffer such that data can be queued until the relay-destination link is selected for transmission. We study both d…
In this paper, we consider a bidirectional relay network with half-duplex nodes and block fading where the nodes transmit with a fixed transmission rate. Thereby, user 1 and user 2 exchange information only via a relay node, i.e., a direct link between both users is not present. Recently in [1], it was shown that a considerable gain in terms of sum throughput can be obtained in bidirectional relaying by optimally selecting the transmission modes or, equivalently, the states of the nodes, i.e., the transmit, the receive, and the silent states, in each time slot based on the qualities of the inv…
This work does the statistical quality-of-service (QoS) analysis of a block-fading device-to-device (D2D) link in a multi-tier cellular network that consists of a macro-BS (BSMC) and a micro-BS (BSmC) which both operate in full-duplex (FD) mode. For the D2D link under consideration, we first formulate the mode selection problem-whereby D2D pair could either communicate directly, or, through the BSmC, or, through the BSMC-as a ternary hypothesis testing problem. Next, to compute the effective capacity (EC) for the given D2D link, we assume that the channel state information (CSI) is not availab…
