We present a practically efficient algorithm that finds all global minimum cuts in huge undirected graphs. Our algorithm uses a multitude of kernelization rules to reduce the graph to a small equivalent instance and then finds all minimum cuts using an optimized version of the algorithm of Nagamochi, Nakao and Ibaraki. In shared memory we are able to find all minimum cuts of graphs with up to billions of edges and millions of minimum cuts in a few minutes. We also give a new linear time algorithm to find the most balanced minimum cuts given as input the representation of all minimum cuts.
We show that every $α$-approximate minimum cut in a connected graph is the unique minimum $(S,T)$-terminal cut for some subsets $S$ and $T$ of vertices each of size at most $\lfloor2α\rfloor+1$. This leads to an alternative proof that the number of $α$-approximate minimum cuts in a $n$-vertex connected graph is $n^{O(α)}$ and they can all be enumerated in deterministic polynomial time for constant $α$.
We significantly improve known time bounds for solving the minimum cut problem on undirected graphs. We use a ``semi-duality'' between minimum cuts and maximum spanning tree packings combined with our previously developed random sampling techniques. We give a randomized algorithm that finds a minimum cut in an m-edge, n-vertex graph with high probability in O(m log^3 n) time. We also give a simpler randomized algorithm that finds all minimum cuts with high probability in O(n^2 log n) time. This variant has an optimal RNC parallelization. Both variants improve on the previous best time bound of…
Given an edge-weighted graph, how many minimum $k$-cuts can it have? This is a fundamental question in the intersection of algorithms, extremal combinatorics, and graph theory. It is particularly interesting in that the best known bounds are algorithmic: they stem from algorithms that compute the minimum $k$-cut. In 1994, Karger and Stein obtained a randomized contraction algorithm that finds a minimum $k$-cut in $O(n^{(2-o(1))k})$ time. It can also enumerate all such $k$-cuts in the same running time, establishing a corresponding extremal bound of $O(n^{(2-o(1))k})$. Since then, the algorithm…
We consider the minimum cut problem in undirected, weighted graphs. We give a simple algorithm to find a minimum cut that $2$-respects (cuts two edges of) a spanning tree $T$ of a graph $G$. This procedure can be used in place of the complicated subroutine given in Karger's near-linear time minimum cut algorithm (J. ACM, 2000). We give a self-contained version of Karger's algorithm with the new procedure, which is easy to state and relatively simple to implement. It produces a minimum cut on an $m$-edge, $n$-vertex graph in $O(m \log^3 n)$ time with high probability, matching the complexity of…
We give query-efficient algorithms for the global min-cut and the s-t cut problem in unweighted, undirected graphs. Our oracle model is inspired by the submodular function minimization problem: on query $S \subset V$, the oracle returns the size of the cut between $S$ and $V \setminus S$. We provide algorithms computing an exact minimum $s$-$t$ cut in $G$ with $\tilde{O}(n^{5/3})$ queries, and computing an exact global minimum cut of $G$ with only $\tilde{O}(n)$ queries (while learning the graph requires $\tildeΘ(n^2)$ queries).
We give an algorithm to find a mincut in an $n$-vertex, $m$-edge weighted directed graph using $\tilde O(\sqrt{n})$ calls to any maxflow subroutine. Using state of the art maxflow algorithms, this yields a directed mincut algorithm that runs in $\tilde O(m\sqrt{n} + n^2)$ time. This improves on the 30 year old bound of $\tilde O(mn)$ obtained by Hao and Orlin for this problem.
We present the first work-optimal polylogarithmic-depth parallel algorithm for the minimum cut problem on non-sparse graphs. For $m\geq n^{1+ε}$ for any constant $ε>0$, our algorithm requires $O(m \log n)$ work and $O(\log^3 n)$ depth and succeeds with high probability. Its work matches the best $O(m \log n)$ runtime for sequential algorithms [MN STOC 2020, GMW SOSA 2021]. This improves the previous best work by Geissmann and Gianinazzi [SPAA 2018] by $O(\log^3 n)$ factor, while matching the depth of their algorithm. To do this, we design a work-efficient approximation algorithm and paralleliz…
We give an algorithm to find a minimum cut in an edge-weighted directed graph with $n$ vertices and $m$ edges in $\tilde O(n\cdot \max(m^{2/3}, n))$ time. This improves on the 30 year old bound of $\tilde O(nm)$ obtained by Hao and Orlin for this problem. Our main technique is to reduce the directed mincut problem to $\tilde O(\min(n/m^{1/3}, \sqrt{n}))$ calls of {\em any} maxflow subroutine. Using state-of-the-art maxflow algorithms, this yields the above running time. Our techniques also yield fast {\em approximation} algorithms for finding minimum cuts in directed graphs. For both edge and …
We consider approximations for computing minimum weighted cuts in directed graphs. We consider both rooted and global minimum cuts, and both edge-cuts and vertex-cuts. For these problems we give randomized Monte Carlo algorithms that compute a $(1+ε)$-approximate minimum cut in $\tilde{O}(n^2 / ε^2)$ time. These results extend and build on recent work [4] that obtained exact algorithms with similar running times in directed graphs with small integer capacities.
The parameterized complexity of counting minimum cuts stands as a natural question because Ball and Provan showed its #P-completeness. For any undirected graph $G=(V,E)$ and two disjoint sets of its vertices $S,T$, we design a fixed-parameter tractable algorithm which counts minimum edge $(S,T)$-cuts parameterized by their size $p$. Our algorithm operates on a transformed graph instance. This transformation, called drainage, reveals a collection of at most $n=\left| V \right|$ successive minimum $(S,T)$-cuts $Z_i$. We prove that any minimum $(S,T)$-cut $X$ contains edges of at least one cut $Z…
In this paper we continue a long line of work on representing the cut structure of graphs. We classify the types minimum vertex cuts, and the possible relationships between multiple minimum vertex cuts. As a consequence of these investigations, we exhibit a simple $O(κn)$-space data structure that can quickly answer pairwise $(κ+1)$-connectivity queries in a $κ$-connected graph. We also show how to compute the "closest" $κ$-cut to every vertex in near linear $\tilde{O}(m+poly(κ)n)$ time.
The minimum cut problem for an undirected edge-weighted graph asks us to divide its set of nodes into two blocks while minimizing the weight sum of the cut edges. In this paper, we engineer the fastest known exact algorithm for the problem. State-of-the-art algorithms like the algorithm of Padberg and Rinaldi or the algorithm of Nagamochi, Ono and Ibaraki identify edges that can be contracted to reduce the graph size such that at least one minimum cut is maintained in the contracted graph. Our algorithm achieves improvements in running time over these algorithms by a multitude of techniques. F…
We study algorithmic and structural aspects of connectivity in hypergraphs. Given a hypergraph $H=(V,E)$ with $n = |V|$, $m = |E|$ and $p = \sum_{e \in E} |e|$ the best known algorithm to compute a global minimum cut in $H$ runs in time $O(np)$ for the uncapacitated case and in $O(np + n^2 \log n)$ time for the capacitated case. We show the following new results. 1. Given an uncapacitated hypergraph $H$ and an integer $k$ we describe an algorithm that runs in $O(p)$ time to find a subhypergraph $H'$ with sum of degrees $O(kn)$ that preserves all edge-connectivities up to $k$ (a $k$-sparsifier)…
Karger used spanning tree packings to derive a near linear-time randomized algorithm for the global minimum cut problem as well as a bound on the number of approximate minimum cuts. This is a different approach from his well-known random contraction algorithm. Thorup developed a fast deterministic algorithm for the minimum $k$-cut problem via greedy recursive tree packings. In this paper we revisit properties of an LP relaxation for $k$-cut proposed by Naor and Rabani, and analyzed by Chekuri, Guha and Naor. We show that the dual of the LP yields a tree packing, that when combined with an uppe…
We describe algorithms to efficiently compute minimum $(s,t)$-cuts and global minimum cuts of undirected surface-embedded graphs. Given an edge-weighted undirected graph $G$ with $n$ vertices embedded on an orientable surface of genus $g$, our algorithms can solve either problem in $g^{O(g)} n \log \log n$ or $2^{O(g)} n \log n$ time, whichever is better. When $g$ is a constant, our $g^{O(g)} n \log \log n$ time algorithms match the best running times known for computing minimum cuts in planar graphs. Our algorithms for minimum cuts rely on reductions to the problem of finding a minimum-weight…
We show how to find a minimum loop cutset in a Bayesian network with high probability. Finding such a loop cutset is the first step in Pearl's method of conditioning for inference. Our random algorithm for finding a loop cutset, called "Repeated WGuessI", outputs a minimum loop cutset, after O(c 6^k k n) steps, with probability at least 1-(1 over{6^k})^{c 6^k}), where c>1 is a constant specified by the user, k is the size of a minimum weight loop cutset, and n is the number of vertices. We also show empirically that a variant of this algorithm, called WRA, often finds a loop cutset that is clo…
In this paper we study minimum cut and maximum flow problems on planar graphs, both in static and in dynamic settings. First, we present an algorithm that given an undirected planar graph computes the minimum cut between any two given vertices in O(n log log n) time. Second, we show how to achieve the same O(n log log n) bound for the problem of computing maximum flows in undirected planar graphs. To the best of our knowledge, these are the first algorithms for those two problems that break the O(n log n) barrier, which has been standing for more than 25 years. Third, we present a fully dynami…
Let $G$ be an $n$-node simple directed planar graph with nonnegative edge weights. We study the fundamental problems of computing (1) a global cut of $G$ with minimum weight and (2) a~cycle of $G$ with minimum weight. The best previously known algorithm for the former problem, running in $O(n\log^3 n)$ time, can be obtained from the algorithm of \Lacki, Nussbaum, Sankowski, and Wulff-Nilsen for single-source all-sinks maximum flows. The best previously known result for the latter problem is the $O(n\log^3 n)$-time algorithm of Wulff-Nilsen. By exploiting duality between the two problems in pla…
We present the first near-linear work and poly-logarithmic depth algorithm for computing a minimum cut in a graph, while previous parallel algorithms with poly-logarithmic depth required at least quadratic work in the number of vertices. In a graph with $n$ vertices and $m$ edges, our algorithm computes the correct result with high probability in $O(m {\log}^4 n)$ work and $O({\log}^3 n)$ depth. This result is obtained by parallelizing a data structure that aggregates weights along paths in a tree and by exploiting the connection between minimum cuts and approximate maximum packings of spannin…
In an undirected graph, a $k$-cut is a set of edges whose removal breaks the graph into at least $k$ connected components. The minimum weight $k$-cut can be computed in $O(n^{O(k)})$ time, but when $k$ is treated as part of the input, computing the minimum weight $k$-cut is NP-Hard [Holdschmidt and Hochbaum 1994]. For $\operatorname{poly}(m,n,k)$-time algorithms, the best possible approximation factor is essentially 2 under the small set expansion hypothesis [Manurangsi 2017]. Saran and Vazirani [1995] showed that a $(2 - 2/k)$-approximately minimum weight $k$-cut can be computed by $O(k)$ min…
Li and Panigrahi, in recent work, obtained the first deterministic algorithm for the global minimum cut of a weighted undirected graph that runs in time $o(mn)$. They introduced an elegant and powerful technique to find isolating cuts for a terminal set in a graph via a small number of $s$-$t$ minimum cut computations. In this paper we generalize their isolating cut approach to the abstract setting of symmetric bisubmodular functions (which also capture symmetric submodular functions). Our generalization to bisubmodularity is motivated by applications to element connectivity and vertex connect…
We introduce a novel approach of using important cuts which allowed us to design significantly faster fixed-parameter tractable (FPT) algorithms for the following routing problems: the Mixed Chinese Postman Problem parameterized by the number of directed edges (Gutin et al., JCSS 2017), the Minimum Shared Edges problem (MSE) parameterized by the number p of paths between two specified vertices (Fluschnik et al., JCSS 2019), and the Weighted Min Cut Prevention problem (Gruttemeier et al., WG 2021). The Minimum Vulnerability problem (MV) is a generalization of MSE (Assadi et al., Algorithmica 20…
We present a deterministic O(n log log n) time algorithm for finding shortest cycles and minimum cuts in planar graphs. The algorithm improves the previously known fastest algorithm by Italiano et al. in STOC'11 by a factor of log n. This speedup is obtained through the use of dense distance graphs combined with a divide-and-conquer approach.
Given a capacitated undirected graph $G=(V,E)$ with a set of terminals $K \subset V$, a mimicking network is a smaller graph $H=(V_H,E_H)$ that exactly preserves all the minimum cuts between the terminals. Specifically, the vertex set of the sparsifier $V_H$ contains the set of terminals $K$ and for every bipartition $U, K-U $ of the terminals $K$, the size of the minimum cut separating $U$ from $K-U$ in $G$ is exactly equal to the size of the minimum cut separating $U$ from $K-U$ in $H$. This notion of a mimicking network was introduced by Hagerup, Katajainen, Nishimura and Ragde (1995) who a…
We show how to find a small loop curser in a Bayesian network. Finding such a loop cutset is the first step in the method of conditioning for inference. Our algorithm for finding a loop cutset, called MGA, finds a loop cutset which is guaranteed in the worst case to contain less than twice the number of variables contained in a minimum loop cutset. We test MGA on randomly generated graphs and find that the average ratio between the number of instances associated with the algorithms' output and the number of instances associated with a minimum solution is 1.22.
We study the minimum cut problem in the presence of uncertainty and show how to apply a novel robust optimization approach, which aims to exploit the similarity in subsequent graph measurements or similar graph instances, without posing any assumptions on the way they have been obtained. With experiments we show that the approach works well when compared to other approaches that are also oblivious towards the relationship between the input datasets.
For an undirected $n$-vertex graph $G$ with non-negative edge-weights, we consider the following type of query: given two vertices $s$ and $t$ in $G$, what is the weight of a minimum $st$-cut in $G$? We solve this problem in preprocessing time $O(n\log^3 n)$ for graphs of bounded genus, giving the first sub-quadratic time algorithm for this class of graphs. Our result also improves by a logarithmic factor a previous algorithm by Borradaile, Sankowski and Wulff-Nilsen (FOCS 2010) that applied only to planar graphs. Our algorithm constructs a Gomory-Hu tree for the given graph, providing a data …
We present a randomized $O(m \log^2 n)$ work, $O(\text{polylog } n)$ depth parallel algorithm for minimum cut. This algorithm matches the work bounds of a recent sequential algorithm by Gawrychowski, Mozes, and Weimann [ICALP'20], and improves on the previously best parallel algorithm by Geissmann and Gianinazzi [SPAA'18], which performs $O(m \log^4 n)$ work in $O(\text{polylog } n)$ depth. Our algorithm makes use of three components that might be of independent interest. Firstly, we design a parallel data structure that efficiently supports batched mixed queries and updates on trees. It gener…
We study the following version of cut sparsification. Given a large edge-weighted network $G$ with $k$ terminal vertices, compress it into a smaller network $H$ with the same terminals, such that every minimum terminal cut in $H$ approximates the corresponding one in $G$, up to a factor $q\geq 1$ that is called the quality. (The case $q=1$ is known also as a mimicking network). We provide new insights about the structure of minimum terminal cuts, leading to new results for cut sparsifiers of planar graphs. Our first contribution identifies a subset of the minimum terminal cuts, which we call e…
We study a number of multi-route cut problems: given a graph G=(V,E) and connectivity thresholds k_(u,v) on pairs of nodes, the goal is to find a minimum cost set of edges or vertices the removal of which reduces the connectivity between every pair (u,v) to strictly below its given threshold. These problems arise in the context of reliability in communication networks; They are natural generalizations of traditional minimum cut problems where the thresholds are either 1 (we want to completely separate the pair) or infinity (we don't care about the connectivity for the pair). We provide the fir…
Given a large edge-weighted network $G$ with $k$ terminal vertices, we wish to compress it and store, using little memory, the value of the minimum cut (or equivalently, maximum flow) between every bipartition of terminals. One appealing methodology to implement a compression of $G$ is to construct a \emph{mimicking network}: a small network $G'$ with the same $k$ terminals, in which the minimum cut value between every bipartition of terminals is the same as in $G$. This notion was introduced by Hagerup, Katajainen, Nishimura, and Ragde [JCSS '98], who proved that such $G'$ of size at most $2^…
We give a deterministic algorithm for finding the minimum (weight) cut of an undirected graph on $n$ vertices and $m$ edges using $\text{polylog}(n)$ calls to any maximum flow subroutine. Using the current best deterministic maximum flow algorithms, this yields an overall running time of $\tilde O(m \cdot \min(\sqrt{m}, n^{2/3}))$ for weighted graphs, and $m^{4/3+o(1)}$ for unweighted (multi)-graphs. This marks the first improvement for this problem since a running time bound of $\tilde O(mn)$ was established by several papers in the early 1990s. Our global minimum cut algorithm is obtained as…
In this note, we revisit the recursive random contraction algorithm of Karger and Stein for finding a minimum cut in a graph. Our revisit is occasioned by a paper of Fox, Panigrahi, and Zhang which gives an extension of the Karger-Stein algorithm to minimum cuts and minimum $k$-cuts in hypergraphs. When specialized to the case of graphs, the algorithm is somewhat different than the original Karger-Stein algorithm. We show that the analysis becomes particularly clean in this case: we can prove that the probability that a fixed minimum cut in an $n$ node graph is returned by the algorithm is bou…
Let $G$ be a directed graph associated with a weight $w: E(G) \rightarrow R^+$. For an edge-cut $Q$ of $G$, the average weight of $Q$ is denoted and defined as $w_{ave}(Q)=\frac{\sum_{e\in Q}w(e)}{|Q|}$. An edge-cut of optimal average weight is an edge-cut $Q$ such that $w_{ave}(Q)$ is maximum among all edge-cuts (or minimum, symmetrically). In this paper, a polynomial algorithm for this problem is proved for finding such an optimal edge-cut in a rooted tree, separating the root and the set of all leafs. This algorithm enables us to develop an automatic clustering method with more accurate det…
Let $G = (V, E)$ be an undirected graph and let $B \subseteq V \times V$ be a set of terminal pairs. A node/edge multicut is a subset of vertices/edges of $G$ whose removal destroys all the paths between every terminal pair in $B$. The problem of computing a {\em minimum} node/edge multicut is NP-hard and extensively studied from several viewpoints. In this paper, we study the problem of enumerating all {\em minimal} node multicuts. We give an incremental polynomial delay enumeration algorithm for minimal node multicuts, which extends an enumeration algorithm due to Khachiyan et al. (Algorithm…
We improve on random sampling techniques for approximately solving problems that involve cuts and flows in graphs. We give a near-linear-time construction that transforms any graph on n vertices into an O(n\log n)-edge graph on the same vertices whose cuts have approximately the same value as the original graph's. In this new graph, for example, we can run the O(m^{3/2})-time maximum flow algorithm of Goldberg and Rao to find an s--t minimum cut in O(n^{3/2}) time. This corresponds to a (1+epsilon)-times minimum s--t cut in the original graph. In a similar way, we can approximate a sparsest cu…
We give a randomized algorithm that finds a minimum cut in an undirected weighted $m$-edge $n$-vertex graph $G$ with high probability in $O(m \log^2 n)$ time. This is the first improvement to Karger's celebrated $O(m \log^3 n)$ time algorithm from 1996. Our main technical contribution is a deterministic $O(m \log n)$ time algorithm that, given a spanning tree $T$ of $G$, finds a minimum cut of $G$ that 2-respects (cuts two edges of) $T$.
We devise new cut sparsifiers that are related to the classical sparsification of Nagamochi and Ibaraki [Algorithmica, 1992], which is an algorithm that, given an unweighted graph $G$ on $n$ nodes and a parameter $k$, computes a subgraph with $O(nk)$ edges that preserves all cuts of value up to $k$. We put forward the notion of a friendly cut sparsifier, which is a minor of $G$ that preserves all friendly cuts of value up to $k$, where a cut in $G$ is called friendly if every node has more edges connecting it to its own side of the cut than to the other side. We present an algorithm that, give…
We present a deterministic near-linear time algorithm that computes the edge-connectivity and finds a minimum cut for a simple undirected unweighted graph G with n vertices and m edges. This is the first o(mn) time deterministic algorithm for the problem. In near-linear time we can also construct the classic cactus representation of all minimum cuts. The previous fastest deterministic algorithm by Gabow from STOC'91 took ~O(m+k^2 n), where k is the edge connectivity, but k could be Omega(n). At STOC'96 Karger presented a randomized near linear time Monte Carlo algorithm for the minimum cut pro…
We develop a framework for incorporating edge-dependent vertex weights (EDVWs) into the hypergraph minimum s-t cut problem. These weights are able to reflect different importance of vertices within a hyperedge, thus leading to better characterized cut properties. More precisely, we introduce a new class of hyperedge splitting functions that we call EDVWs-based, where the penalty of splitting a hyperedge depends only on the sum of EDVWs associated with the vertices on each side of the split. Moreover, we provide a way to construct submodular EDVWs-based splitting functions and prove that a hype…
We study multi-budgeted variants of the classic minimum cut problem and graph separation problems that turned out to be important in parameterized complexity: Skew Multicut and Directed Feedback Arc Set. In our generalization, we assign colors $1,2,...,\ell$ to some edges and give separate budgets $k_{1},k_{2},...,k_{\ell}$. Let $E_{i}$ be the set of edges of color $i$. The solution $C$ for the multi-budgeted variant of a graph separation problem not only needs to satisfy the usual separation requirements, but also needs to satisfy that $|C\cap E_{i}|\leq k_{i}$ for every $i\in \{1,...,\ell\}$…
Cut problems form one of the most fundamental classes of problems in algorithmic graph theory. For instance, the minimum cut, the minimum $s$-$t$ cut, the minimum multiway cut, and the minimum $k$-way cut are some of the commonly encountered cut problems. Many of these problems have been extensively studied over several decades. In this paper, we initiate the algorithmic study of some cut problems in high dimensions. The first problem we study, namely, Topological Hitting Set (THS), is defined as follows: Given a nontrivial $r$-cycle $ζ$ in a simplicial complex $\mathsf{K}$, find a set $\mathc…
We study the problem of finding a small sparse cut in an undirected graph. Given an undirected graph G=(V,E) and a parameter k <= |E|, the small sparsest cut problem is to find a subset of vertices S with minimum conductance among all sets with volume at most k. Using ideas developed in local graph partitioning algorithms, we obtain the following bicriteria approximation algorithms for the small sparsest cut problem: - If there is a subset U with conductance ϕand vol(U) <= k, then there is a polynomial time algorithm to find a set S with conductance O(\sqrt{ϕ/ε}) and vol(S) <= k^{1+ε} for any …
