We investigate a plasmonic electro-optic modulator with an extinction ratio exceeding 1 dB/um by engineering the optical mode to be in-plane with the graphene layer, and show how lowering the operating temperature enables steeper switching. We show how cooling Graphene enables steeping thus improving dynamic energy consumption. Further, we show that multi-layer Graphene integrated with a plasmonic slot waveguide allows for in-plane electric field components, and 3-dB device lengths as short as several hundred nanometers only. Compact modulators approaching electronic length-scales pave a way for ultra-dense photonic integrated circuits with smallest footprints
We formulate and experimentally validate an equivalent-circuit model based on distributed elements to describe the electric and electro-optic (EO) properties of travellingwave silicon-organic hybrid (SOH) slot-waveguide modulators. The model allows to reliably predict the small-signal EO frequency response of the modulators exploiting purely electrical measurements of the frequency-dependent RF transmission characteristics. We experimentally verify the validity of our model, and we formulate design guidelines for an optimum trade-off between optical loss due to free-carrier absorption (FCA), e…
Here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometeric modulator, exhibiting a miniscule VpL of 95 V-um, deploying a sub-wavelength short electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics.
Electro-optic (EO) modulators rely on interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced by using dielectric slot-waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usually applied through conductive regions in the direct vicinity of the optical waveguide. To avoid excessive optical loss, the conductivity of these regions is maintained at a moderate level, thus leadi…
Integrated ferroelectric plasmonic modulators featuring large bandwidths, broad optical operation range, resilience to high temperature and ultracompact footprint are introduced. Measurements show a modulation bandwidth of 70 GHz and a temperature stability up to 250°C. Mach-Zehnder interferometer modulators with 10-$μ$m-long phase shifters were operated at 116 Gbit/s PAM-4 and 72 Gbit/s NRZ. Wide and open eye diagrams with extinction ratios beyond 15 dB were found. The fast and robust devices are apt to an employment in industrial environments.
We present a plasmonic modulator based on hybrid orthogonal silver junctions using vanadium dioxide as the modulating material on the silicon on insulator. The modulator has an ultra-compact footprint of 1.8μm x 1μm with a 100nm x 100nm modulating section based on the orthogonal geometry. We take advantage of large change in the refractive index of vanadium dioxide during its phase transition to achieve a high modulation depth of 46.89dB/μm. We also provide a fabrication strategy for the development of this device. The device geometry has potential applications in the development of next gener…
Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency (RF) signal applied on the Au electrodes at the top of MOS capacitor and contacting the In$_2$O$_3$ thin film. The record-high modulation bandwidth of >40 GHz is realized by a silicon-doping-free met…
We introduce phase-change material Ge2Sb2Te5 (GST) into metal-insulator-metal (MIM) waveguide systems to realize chipscale plasmonic modulators and switches in the telecommunication band. Benefitting from the high contrast of optical properties between amorphous and crystalline GST, the three proposed structures can act as reconfigurable and non-volatile modulators and switches with excellent modulation depth 14 dB and fast response time in nanosecond, meanwhile possessing small footprints, simple frameworks and easy fabrication. This work provides new solutions to design active devices in MIM…
We investigate mode converters for Si wire to plasmonic slot waveguides at 1550 nm telecom wavelength. The structures are based on a taper geometry. We provide optimal dimensions with more than 90% power transmission for a range of metal (Au) thicknesses between 30-250 nm. We provide details on how to differentiate between the total power and the power in the main mode of the plasmonic slot waveguide. Our analysis is based on the orthogonality of modes of the slot waveguide subject to a suitable inner product definition. Our results are relevant for lowering the insertion loss and the bit erro…
Broadband electro-optic intensity modulators are essential to convert electrical signals to the optical domain. The growing interest in THz wireless applications demands modulators with frequency responses to the sub-THz range, high power handling and very low nonlinear distortions, simultaneously. However, a modulator with all those characteristics has not been demonstrated to date. Here we experimentally demonstrate that plasmonic modulators do not trade off any performance parameter, featuring - at the same time - a short length of 10s of micrometers, record-high flat frequency response bey…
In this paper, a numerical solution for a hybrid plasmonic modulator is presented with a six-layer structure consisting of an air superstrate, a gold layer, a barium titanate layer, a n type silicon layer, a gold layer and an Al2O3 nanolattice substrate. Regarding the suggested structure, the parameters related to the phase and the absorption modulation are investigated at different thicknesses. Here, the Pockels effect and the free carrier dispersion effect are considered simultaneously. The dispersion equation of this structure is analytically obtained and numerically solved by the Nelder-Me…
Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines …
A plasmonic modulator is a device that controls the amplitude or phase of propagating plasmons. In a pure plasmonic modulator, the presence or absence of a pump plasmonic wave controls the amplitude of a probe plasmonic wave through a channel. This control has to be mediated by an interaction between disparate plasmonic waves, typically requiring the integration of a nonlinear material. In this work, we demonstrate the first 2D semiconductor nonlinear plasmonic modulator based on a WSe2 monolayer integrated on top of a lithographically defined metallic waveguide. We utilize the strong coupling…
We introduce chip-integrated visible light communication-band modulators based on niobium (Nb) metallic plasmonic nano-antenna arrays. Our plasmonic nano-devices provide strong sensitivity to the polarization of the incident visible light and the geometrical parameters of their subwavelength nanoscale building blocks. Moreover, they offer optical modulation properties with modulation depth MD = 60% at resonant wavelength lambda= 716 nm, at room temperature. By engineering the photo response of the Nb nano-device arrays, we observe a maximum extinction A(lambda)= 1- R(lambda}) = 95 % at resonan…
An ultra-narrow slot waveguide is fabricated for use in highly-efficient, electro-optic-polymer-based, integrated-optic modulators. Measurement results indicate that $V_πL$'s below 1.2 V.mm are possible for balanced Mach-Zehnder modulators using this ultra-narrow slot waveguide on a silicon-organic hybrid platform. Simulated $V_πL$'s of 0.35 V.mm have also been obtained. In addition to adapting standard recipes, we developed two novel fabrication processes for achieving miniaturized devices with high modulation sensitivity. To boost compactness and decrease the overall footprint, we use a fabr…
Using a pair of p- and n-type semiconductors separated by a nanoscale vacuum gap, we introduce an optoelectronics element prototype, "photonic p-n junction", as an analogue of the electronic p-n junction, which is demonstrated to serve as an ideal near-field heat flux modulator. The high modulation performance relies on the switch among three fundamental photon-carrier interaction modes (i.e., surface plasmon polaritons, symmetric depleted internal plasmon polaritons and symmetric accumulated surface plasmon polaritons) caused by the changes in hole and electron densities near the surfaces und…
Future wireless communication networks have to handle data rates of tens or even hundreds of Gbit/s per link, requiring carrier frequencies in the unallocated terahertz (THz) spectrum. In this context, seamless integration of THz links into existing fiber-optic infrastructures is of great importance to complement the inherent portability and flexibility advantages of wireless networks by the reliable and virtually unlimited capacity of optical transmission systems. On the technological level, this requires novel device and signal processing concepts for direct conversion of data streams betwee…
Graphene has extraordinary electro-optic properties and is therefore a promising candidate for monolithic photonic devices such as photodetectors. However, the integration of this atom-thin layer material with bulky photonic components usually results in a weak light-graphene interaction leading to large device lengths limiting electro-optic performance. In contrast, here we demonstrate a plasmonic slot graphene photodetector on silicon-on-insulator platform with high-responsivity given the 5 um-short device length. We observe that the maximum photocurrent, and hence the highest responsivity, …
In this paper, a numerical solution for a plasmonic absorption modulator is presented with a six-layer structure consisting of an air superstrate, a gold layer, a barium titanate layer, a n type silicon layer, a gold layer and a thin-shell nanolattice aluminium oxide substrate. Regarding the suggested structure, the parameters related to the absorption modulation are investigated at different thicknesses. Here, the Pockels effect and the free carrier dispersion effect are considered simultaneously. The dispersion relation of this structure is analytically obtained and numerically solved by the…
Electro-optic modulation is a technology-relevant function for signal keying, beam steering, or neuromorphic computing through providing the nonlinear activation function of a perceptron. With silicon-based modulators being bulky and inefficient, we here discuss graphene-based devices heterogeneously integrated. This study provides a critical and encompassing discussing of the physics and performance of graphene modulators rather than collecting relevant published work. We provide a holistic analysis of the underlying physics of modulators including the graphenes index tunability, the underlyi…
In this paper we report on a low energy consumption CMOS-compatible plasmonic modulator based on Franz-Keldysh effect in germanium on silicon. We performed integrated electro-optical simulations in order to optimize the main characteristics of the modulator. A 3.3 $dB$ extinction ratio for a 30 $μm$ long modulator is demonstrated under 3 $V$ bias voltage at an operation wavelength of 1647 $nm$. The estimated energy consumption is as low as 20 $fJ/bit$.
Vanadium dioxide (${\rm VO}_2$) is a phase change material (PCM) that exhibits a large change in complex refractive index on the order of unity upon switching from its dielectric to its metallic phase. Although this property is key for the design of ultracompact optical modulators of only a few microns in footprint, the high absorption of ${\rm VO}_2$ leads to appreciable insertion loss (IL) that limits the modulator performance. In this paper, through theory and numerical modeling, we report on a new paradigm, which demonstrates how the use of a hybrid plasmonic waveguide to construct a ${\rm…
An efficient electro-optical modulation has been demonstrated here by using an edge plasmon mode specific for the hybrid plasmonic waveguide. Our approach addresses a major obstacle of the integrated microwave photonics caused by the polarization constraints of both active and passive components. In addition to sub-wavelength confinement, typical for surface plasmon polaritons, the edge plasmon modes enable exact matching of the polarization requirements for silicon based input/output grating couplers, waveguides and electro-optical modulators. A concept of the hybrid waveguide, implemented in…
This work aims to design a CMOS compatible, low-electrical power consumption modulator assisted by plasmons. For compactness and reduction of the electrical power consumption, electro-absorption based on the Franz-Keldysh effect in Germanium was chosen for modulation. It consists in the change of the absorption coefficient of the material near the band edge under the application of a static electric field, hence producing a direct modulation of the light intensity. The use of plasmons allows enhancing the electro-optical effect due to the high field confinement. An integrated electro-optical s…
Ultraviolet (UV) electro-optic modulation system based on graphene-plasmonic metamaterials nanomechanical system (NEMS) with superlubricity is investigated. Due to the strong optical absorption intensity of graphene in the UV region and the combination of metamaterial structure based on surface plasmons, the modulation depth of the UV NEMS electro-optic modulator approaches as high as 8.5 times compared to the counterpart modulator in visible light region. Meanwhile, the superlubricity significantly reduces the power consumption of the UV electro-optic modulation system due to its extremely lo…
Electro optic modulators being key for many signal processing systems must adhere to requirements given by both electrical and optical constrains. Distinguishing between charge driven (CD) and field driven (FD) designs, we answer the question of whether fundamental performance benefits can be claimed of modulators based on emerging electro-optic materials. Following primary metrics, we compare the performance of emerging electro-optic and electro-absorption modulators such as graphene, transparent conductive oxides, and Si, based on charge injection with that of the legacy FD modulators, such …
Modulating the amplitude and phase of light is at the heart of many applications such as wavefront shaping, transformation optics, phased arrays, modulators and sensors. Performing this task with high efficiency and small footprint is a formidable challenge. Metasurfaces and plasmonics are promising , but metals exhibit weak electro-optic effects. Two-dimensional materials, such as graphene, have shown great performance as modulators with small drive voltages. Here we show a graphene plasmonic phase modulator which is capable of tuning the phase between 0 and 2π in situ. With a footprint of 35…
From the onset of high-speed optical communications, lithium niobite (LN) has been the material of choice for electro-optic modulators owing to its large electro-optic response, wide transparent window, excellent thermal stability and long-term material reliability. Conventional LN electro-optic modulators while continue to be the workhorse of the optoelectronic industry become progressively too bulky, expensive and power hungry to fully serve the needs of this industry rapidly progressing towards highly integrated, cost-effective and energy efficient components and circuits. Recently develope…
Graphene has emerged as an ultrafast photonic material for on-chip all-optical modulation. However, its atomic thickness limits its interaction with guided optical modes, which results in a high switching energy per bit or low modulation efficiencies. Nonetheless, it is possible to enhance the interaction of guided light with graphene by nanophotonic means. Herein, we present a practical design of an all-optical modulator that is based on graphene and hexagonal boron nitride (hBN) heterostructures that are hybrid integrated into silicon slot waveguides. Using this device, a high extinction rat…
Surface plasmon mediated hot carrier generation is widely utilized for the manipulation of the electron-photon interactions in many types of optoelectronic devices including solar cells, photodiodes, and optical modulators. A diversity of plasmonic systems such as nanoparticles, resonators, and waveguides have been introduced to enhance hot carrier generation; however, the impact of the propagating surface plasmons on hot carrier lifetime has not been clearly demonstrated. Here, we systematically study the hot carrier relaxation in thin film gold (Au) samples under surface plasmon coupling wit…
On-chip manipulating and controlling the temporal and spatial evolution of light is of crucial importance for information processing in future planar integrated nanophotonics. The spin and orbital angular momentum of light, which can be treated independently in classical macroscopic geometrical optics, appear to be coupled on subwavelength scales. We use spin-orbit interactions in a plasmonic achiral nano-coupler to unidirectionally excite surface plasmon polariton modes propagating in seamlessly integrated plasmonic slot waveguides. The spin-dependent flow of light in the proposed nanophotoni…
Graphene, the carbon monolayer and 2D allotrope of graphite, has the potential to impact technology with a wide range of applications such as optical modulators for high-speed communications. In contrast to modulation devices that rely on plasmonic or electronic effects, MEMS-based modulators can have wider tuning ranges albeit at a lower operating frequency. These properties make electro-optic mechanical modulators ideal for reflective-type display technologies as has been demonstrated previously with SiN membranes in Interferometric MOdulator Displays (IMODs). Despite their low-power consump…
We propose a novel analytical model for anisotropic multi-layer cylindrical structures containing graphene layers. The general structure is formed by an aperiodic repetition of a three-layer sub-structure, where a graphene layer, with an isotropic surface conductivity, has been sandwiched between two adjacent magnetic materials. An external magnetic bias has been applied in the axial direction. General matrix representation is obtained in our proposed analytical model to find the dispersion relation. The relation will be used to find the effective index of the structure and its other propagati…
The plasma wave instabilities in ballistic Field Effect Transistors (FETs) have a promise of developing sensitive THz detectors and efficient THz sources. One of the difficulties in achieving efficient resonant plasmonic detection and generation is assuring proper boundary conditions at the contacts and at the heterointerfaces and tuning the plasma velocity. We propose using the tunable narrow channel regions of an increased width, which we call "stubs" for optimizing the boundary conditions and for controlling the plasma velocity. We developed a compact model for THz plasmonic devices using t…
