Electro optic modulators being key for many signal processing systems must adhere to requirements given by both electrical and optical constrains. Distinguishing between charge driven (CD) and field driven (FD) designs, we answer the question of whether fundamental performance benefits can be claimed of modulators based on emerging electro-optic materials. Following primary metrics, we compare the performance of emerging electro-optic and electro-absorption modulators such as graphene, transparent conductive oxides, and Si, based on charge injection with that of the legacy FD modulators, such as those based on lithium niobate and quantum confined Stark effect. We show that for rather fundamental reasons, FD modulators always outperform CD ones in the conventional wavelength scale waveguides. However, for waveguide featuring a sub-wavelength optical mode, such as those assisted by plasmonics, the emerging CD devices are indeed highly competitive.
High performance integrated electro-optic modulators operating at low temperature are critical for optical interconnects in cryogenic applications. Existing integrated modulators, however, suffer from reduced modulation efficiency or bandwidth at low temperatures because they rely on tuning mechanisms that degrade with decreasing temperature. Graphene modulators are a promising alternative, since graphene's intrinsic carrier mobility increases at low temperature. Here we demonstrate an integrated graphene-based electro-optic modulator whose 14.7 GHz bandwidth at 4.9 K exceeds the room-temperat…
Electro-optic phase modulators are critical components in modern communication, microwave photonic, and quantum photonic systems. Important for these applications is to achieve modulators with low half-wave voltage at high frequencies. Here we demonstrate an integrated phase modulator, based on a thin-film lithium niobate platform, that simultaneously features small on-chip loss (~ 1 dB) and low half-wave voltage over a large spectral range (3.5 - 4.5 V at 5 - 40 GHz). By driving the modulator with a strong 30-GHz microwave signal corresponding to around four half-wave voltages, we generate an…
Electro-optic modulators with low voltage and large bandwidth are crucial for both analog and digital communications. Recently, thin-film lithium niobate modulators have enable dramatic performance improvements by reducing the required modulation voltage while maintaining high bandwidths. However, the reduced electrode gaps in such modulators leads to significantly higher microwave losses, which limit electro-optic performance at high frequencies. Here we overcome this limitation and achieve a record combination of low RF half-wave voltage of 1.3 V while maintaining electro-optic response with…
We report second harmonic generation from a titanium indiffused lithium niobate waveguide resonator device whose cavity length is locked to the fundamental pump laser using an on-chip phase modulator. The device remains locked for more than 5 minutes, producing more than 80\% of the initial second harmonic power. The stability of the system is seen to be limited by DC-drift, a known effect in many lithium niobate systems that include deposited electrodes. The presented device explores the suitability of waveguide resonators in this platform for use in larger integrated networks.
Integrated lithium niobate (LN) photonics is a promising platform for future chip-scale microwave photonics systems owing to its unique electro-optic properties, low optical loss and excellent scalability. A key enabler for such systems is a highly linear electro-optic modulator that could faithfully covert analog electrical signals into optical signals. In this work, we demonstrate a monolithic integrated LN modulator with an ultrahigh spurious-free dynamic range (SFDR) of 120.04 dB Hz4/5 at 1 GHz, using a ring-assisted Mach-Zehnder interferometer configuration. The excellent synergy between …
Broadband integrated thin-film lithium niobate (TFLN) electro-optic modulators (EOM) are desirable for optical communications and signal processing in both the O-band (1310 nm) and C-band (1550 nm). To address these needs, we design and demonstrate Mach-Zehnder (MZ) EOM devices in a hybrid platform based on TFLN bonded to foundry-fabricated silicon photonic waveguides. Using a single silicon lithography step and a single bonding step, we realize MZ EOM devices which cover both wavelength ranges on the same chip. The EOM devices achieve 100 GHz EO bandwidth (referenced to 1 GHz) and about 2-3 V…
With the increasing need for large volumes of data processing, transport, and storage, optimizing the trade-off between high-speed and energy consumption in today's optoelectronic devices is getting increasingly difficult. Heterogeneous material integration into Silicon- and Nitride-based photonics has showed high-speed promise, albeit at the expense of millimeter- to centimeter-scale footprints. The hunt for an electro-optic modulator that combines high speed, energy efficiency, and compactness to support high component density on-chip continues. Using a double-layer graphene optical modulato…
Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines …
To develop a new generation of high-speed photonic modulators on silicon-technology-based photonics, new materials with large Pockels coefficients have been transferred to silicon substrates. Previous approaches focus on realizing stand-alone devices on dedicated silicon substrates, incompatible with the fabrication process in silicon foundries. In this work, we demonstrate monolithic integration of electro-optic modulators based on the Pockels effect in barium titanate (BTO) thin films into the back-end-of-line of a photonic integrated circuit (PIC) platform. Molecular wafer bonding allows fu…
Segmented, or slow-wave electrodes have emerged as an index-matching solution to improve bandwidth of traveling-wave Mach Zehnder and phase modulators on the thin-film lithium niobate on insulator platform. However, these devices require the use of a quartz handle or substrate removal, adding cost and additional processing. In this work, a high-speed dual-output electro-optic intensity modulator in the thin-film silicon nitride and lithium niobate material system that uses segmented electrodes for RF and optical index matching is presented. The device uses a silicon handle and does not require…
We investigate a plasmonic electro-optic modulator with an extinction ratio exceeding 1 dB/um by engineering the optical mode to be in-plane with the graphene layer, and show how lowering the operating temperature enables steeper switching. We show how cooling Graphene enables steeping thus improving dynamic energy consumption. Further, we show that multi-layer Graphene integrated with a plasmonic slot waveguide allows for in-plane electric field components, and 3-dB device lengths as short as several hundred nanometers only. Compact modulators approaching electronic length-scales pave a way f…
Electro-optic modulators transform electronic signals into the optical domain and are critical components in modern telecommunication networks, RF photonics, and emerging applications in quantum photonics and beam steering. All these applications require integrated and voltage-efficient modulator solutions with compact formfactors that are seamlessly integratable with Silicon photonics platforms and feature near-CMOS material processing synergies. However, existing integrated modulators are challenged to meet these requirements. Conversely, emerging electro-optic materials heterogeneously inte…
We demonstrated a silicon integrated microring modulator working at the 2-um waveband with an L-shaped PN junction. 15-GHz 3-dB electro-optic bandwidth and <1 Vcm modulation efficiency for 45-Gbps NRZ-OOK signaling is achieved at 1960 nm.
Ultraviolet (UV) electro-optic modulation system based on graphene-plasmonic metamaterials nanomechanical system (NEMS) with superlubricity is investigated. Due to the strong optical absorption intensity of graphene in the UV region and the combination of metamaterial structure based on surface plasmons, the modulation depth of the UV NEMS electro-optic modulator approaches as high as 8.5 times compared to the counterpart modulator in visible light region. Meanwhile, the superlubricity significantly reduces the power consumption of the UV electro-optic modulation system due to its extremely lo…
Engineering cm-scale true push-pull electro-optic modulators in a suspended GaAs photonic integrated circuit platform by exploiting the orientation induced asymmetry of the Pockels $r_{41}$ coefficient
Reliable operation of photonic integrated circuits at cryogenic temperatures would enable new capabilities for emerging computing platforms, such as quantum technologies and low-power cryogenic computing. The silicon-on-insulator platform is a highly promising approach to developing large-scale photonic integrated circuits due to its exceptional manufacturability, CMOS compatibility and high component density. Fast, efficient and low-loss modulation at cryogenic temperatures in silicon, however, remains an outstanding challenge, particularly without the addition of exotic nonlinear optical mat…
Optical isolators, while commonplace in bulk- and fiber-optic systems, remain a key missing component in integrated photonic systems. Isolation using magneto-optic effects has been difficult to implement due to fabrication restraints, motivating use of other non-reciprocal effects such as temporal modulation. We demonstrate a non-reciprocal modulator comprising a pair of microring modulators and a microring phase shifter in an active silicon photonic process which, in combination with standard frequency filters, facilitates isolation. Isolation up to 13 dB is measured with a 3 dB bandwidth of …
A fundamental challenge of the quantum revolution is to efficiently interface the quantum computing systems operating at cryogenic temperatures with room temperature electronics and media for high data-rate communication. Current approaches to control and readout of such cryogenic computing systems use electrical cables, which prevent scalability due to their large size, heat conduction, and limited bandwidth1. A more viable approach is to use optical fibers which allow high-capacity transmission and thermal isolation. A key component in implementing photonic datalinks is a cryogenic optical m…
Integrated electrical and photonic circuits (PIC) operating at cryogenic temperatures are fundamental building blocks required to achieve scalable quantum computing, and cryogenic computing technologies. Optical interconnects offer better performance and thermal insulation than electrical wires and are imperative for true quantum communication. Silicon PICs have matured for room temperature applications but their cryogenic performance is limited by the absence of efficient low temperature electro-optic (EO) modulation. While detectors and lasers perform better at low temperature, cryogenic opt…
Recently integrated optics has become an intriguing platform for implementing machine learning algorithms and inparticular neural networks. Integrated photonic circuits can straightforwardly perform vector-matrix multiplicationswith high efficiency and low power consumption by using weighting mechanism through linear optics. Although,this can not be said for the activation function which requires either nonlinear optics or an electro-optic module withan appropriate dynamic range. Even though all-optical nonlinear optics is potentially faster, its current integrationis challenging and is rather…
Integrated ferroelectric plasmonic modulators featuring large bandwidths, broad optical operation range, resilience to high temperature and ultracompact footprint are introduced. Measurements show a modulation bandwidth of 70 GHz and a temperature stability up to 250°C. Mach-Zehnder interferometer modulators with 10-$μ$m-long phase shifters were operated at 116 Gbit/s PAM-4 and 72 Gbit/s NRZ. Wide and open eye diagrams with extinction ratios beyond 15 dB were found. The fast and robust devices are apt to an employment in industrial environments.
Integrated thin-film lithium niobate (TFLN) photonics has emerged as a promising platform for realization of high-performance chip-scale optical systems. Of particular importance are TFLN electro-optic modulators featuring high-linearity, low driving voltage and lowpropagation loss. However, fully integrated system requires integration of high power, low noise, and narrow linewidth lasers on TFLN chip. Here we achieve this goal, and demonstrate integrated high-power lasers on TFLN platform with up to 60 mW of optical power in the waveguides. We use this platform to realize a highpower transmit…
We present an electro-optic modulator exploiting an array of Vanadium dioxide nanorods operating in the epsilon near regime as the active switching material integrated in a silicon waveguide. The modulator takes advantage of the insulator-to-metal transition of Vanadium dioxide to achieve a robust modulation depth of 19.7 dB/micron with a broad wavelength of operation. Using simulations, we demonstrate how the effective permittivity of the metamaterial can be tuned to a near-zero value by varying the nanorod geometry. The paper also proposes a novel hexagonal array design which achieves low in…
Integrated thin-film lithium niobate (LN) electro-optic (EO) modulators of broad bandwidth, low insertion loss, low cost and high production rate are essential elements in contemporary inter-connection industries and disruptive applications. Here, we demonstrated the design and fabri-cation of a high performance thin-film LN EO modulator using photolithography assisted chemo-mechanical etching (PLACE) technology. Our device shows a 3-dB bandwidth over 50 GHz, along with a comparable low half wave voltage-length product of 2.16 Vcm. We obtain a fiber-to-fiber insertion loss of 2.6 dB.
We report the design and operation of a surface-emitting surface acoustic wave (SAW) acousto-optical modulator which behaves as a cm-scale linear hologram in response to an applied electronic waveform. The modulator is formed by an optical waveguide, transducer, and out-coupling surface grating on a 1 mm-thick lithium niobate substrate. We demonstrate the ability to load and illuminate a 9-region linear hologram into the modulator's 8 mm-long interaction region using applied waveforms of 280-320 MHz. To the best of the authors' knowledge, this is the first demonstration of a monolithically-int…
An integrated hybrid thin-film lithium niobate (TFLN) electro-optic Mach-Zehnder modulator (MZM) is shown at near-infrared wavelengths. The design uses TFLN bonded to planarized silicon nitride waveguide circuits, and does not require etching or patterning of TFLN. The push-pull MZM achieves a half-wave voltage length product ($V_πL$) of 0.8 V$.$cm at 784 nm. MZM devices with 0.4 cm and 0.8 cm modulation length show a broadband electro-optic response with a 3 dB bandwidth beyond 100 GHz, with the latter showing a bandwidth to half-wave voltage ratio of 100 GHz/V.
Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to co-implement with standard integrated photonic circuitry. Notably, despite significant advances in integrated electro-optic modulators, related acousto-optic modulator concepts have remained relativel…
Optical modulators are one of the most important elements of photonic circuits. Here, we designed, fabricated and characterized a nanophotonic all optical modulator (NOM) in silicon that is an order of magnitude smaller than any previous silicon modulators, and exhibits an extinction ratio and operable spectrum that are an order of magnitude larger than alternatives. Simulations indicate that our device can provide about 9.5dB extinction ratio with a bandwidth of 10nm, centered at 1.55um, corresponding to extinction ratio per device length of about 3.2dB/μm. Our device is fully compatible with…
We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-quality scalable graphene and low contact resistance. By demonstrating this high-speed CVD graphene EAM modulator integrated on Si photonics and the scalable approach, we are confident that graphene can sat…
Mid-infrared silicon photonics has recently emerged as a new technology for a wide range of applications such as optical communication, lidar, and bio-sensing. One key component enabling this technology is the mid-infrared optical modulator used for encoding optical signals. Here, we present a GeSn electro-absorption modulator that can operate in the mid-infrared range. Importantly, this device is monolithically integrated on a silicon substrate, which provides compatibility with standard complementary metal-oxide-semiconductor technology for scalable manufacturing. By alloying Ge with Sn to e…
We introduce chip-integrated visible light communication-band modulators based on niobium (Nb) metallic plasmonic nano-antenna arrays. Our plasmonic nano-devices provide strong sensitivity to the polarization of the incident visible light and the geometrical parameters of their subwavelength nanoscale building blocks. Moreover, they offer optical modulation properties with modulation depth MD = 60% at resonant wavelength lambda= 716 nm, at room temperature. By engineering the photo response of the Nb nano-device arrays, we observe a maximum extinction A(lambda)= 1- R(lambda}) = 95 % at resonan…
Modern advanced photonic integrated circuits require dense integration of high-speed electro-optic functional elements on a compact chip that consumes only moderate power. Energy efficiency, operation speed, and device dimension are thus crucial metrics underlying almost all current developments of photonic signal processing units. Recently, thin-film lithium niobate (LN) emerges as a promising platform for photonic integrated circuits. Here we make an important step towards miniaturizing functional components on this platform, reporting probably the smallest high-speed LN electro-optic modula…
Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency (RF) signal applied on the Au electrodes at the top of MOS capacitor and contacting the In$_2$O$_3$ thin film. The record-high modulation bandwidth of >40 GHz is realized by a silicon-doping-free met…
Graphene is a 2D material with appealing electronic and optoelectronic properties. It is a zero-bandgap material with valence and conduction bands meeting in a single point (Dirac point) in the momentum space. Its conductivity can be changed by shifting the Fermi level energy via an external electric field. This important property determines broadband and tunable absorption at optical frequencies. Moreover, its conductivity is a complex quantity, i.e. Graphene exhibits both electro-absorption and electro-refraction tunability, and this is an intriguing property for photonic applications. For e…
III-V heterostructure based high electron mobility transistors (HEMTs) offer superior performance as compared to CMOS silicon transistors owing to the high mobility in the 2D electron gas (2DEG) channel at the heterostructure interface. Gallium nitride (GaN) based HEMTs are also suitable for high power and high temperature applications. GaN has a rich offering of material properties spanning domains of nonlinear optics, piezoelectric micro-electro-mechanical systems (MEMS), and monolithic microwave integrated circuits (MMICs). In this paper, we propose HEMT inspired III-V electro-optic modulat…
Electro-optic modulators provide a key function in optical transceivers and increasingly in photonic programmable Application Specific Integrated Circuits (ASICs) for machine learning and signal processing. However, both foundry ready silicon based modulators and conventional material based devices utilizing Lithium niobate fall short in simultaneously providing high chip packaging density and fast speed. Current driven ITO based modulators have the potential to achieve both enabled by efficient light matter interactions. Here, we introduce micrometer compact Mach Zehnder Interferometer (MZI) …
Electro-optic modulation is a technology-relevant function for signal keying, beam steering, or neuromorphic computing through providing the nonlinear activation function of a perceptron. With silicon-based modulators being bulky and inefficient, we here discuss graphene-based devices heterogeneously integrated. This study provides a critical and encompassing discussing of the physics and performance of graphene modulators rather than collecting relevant published work. We provide a holistic analysis of the underlying physics of modulators including the graphenes index tunability, the underlyi…
