Retrieving the vast amount of information carried by a photon is an enduring challenge in quantum metrology science and quantum photonics research. The transverse spatial state of a photon is a convenient high-dimensional quantum system for study, as it has a well-understood classical analogue as the transverse complex field profile of an optical beam. One severe drawback of all currently available quantum metrology techniques is the need for a time-consuming characterization process, which scales very unfavorably with the dimensionality of the quantum system. Here we demonstrate a technique that directly measures a million-dimensional photonic spatial state in a single setting. Through the arrangement of a weak measurement of momentum and parallel strong measurements of position, the complex values of the entire photon state vector become measurable directly. The dimension of our measured state is approximately four orders of magnitude larger than previously measured. Our work opens up a practical route for characterizing high-dimensional quantum systems in real time. Furthermore, our demonstration also serve as a high-speed, extremely-high-resolution unambiguous complex field measurement technique for diverse classical applications.
Gallium Arsenide and related compound semiconductors lie at the heart of optoelectronics and integrated laser technologies. Shaped at the micro and nano-scale, they allow strong interaction with quantum dots and quantum wells, and promise to result in stunning devices. However gallium arsenide optical structures presently exhibit lower performances than their silicon-based counterparts, notably in nanophotonics where the surface plays a chief role. Here we report on advanced surface control of miniature gallium arsenide optical resonators, using two distinct techniques that produce permanent r…
An effective harmonic potential for photons is achieved in a photonic crystal structure, owing to the balance of the background dispersion and a bichromatic potential. Consequently, ultra-compact resonators with several equi-spaced resonances and high loaded Q factors (0.7 million) are demonstrated. A detailed statistical analysis is carried out by exploiting the complex reflection spectra measured with Optical Coherent Tomography. The log-normal distribution of the intrinsic Q-factors peaks at 3 million. The device is made of $Ga_{0.5}In_{0.5}P$ in order to suppress the two photon absorption …
Delivering on the revolutionary promise of a universal quantum computer will require processors with millions of quantum bits (qubits). In superconducting quantum processors, each qubit is individually addressed with microwave signal lines that connect room temperature electronics to the cryogenic environment of the quantum circuit. The complexity and heat load associated with the multiple coaxial lines per qubit limits the possible size of a processor to a few thousand qubits. Here we introduce a photonic link employing an optical fiber to guide modulated laser light from room temperature to …
We demonstrate photonic crystal nanobeam cavities that support both TE- and TM-polarized modes, each with a Quality factor greater than one million and a mode volume on the order of the cubic wavelength. We show that these orthogonally polarized modes have a tunable frequency separation and a high nonlinear spatial overlap. We expect these cavities to have a variety of applications in resonance-enhanced nonlinear optics.
High Q optical resonators are a key component for ultra-narrow linewidth lasers, frequency stabilization, precision spectroscopy and quantum applications. Integration of these resonators in a photonic waveguide wafer-scale platform is key to reducing their cost, size and power as well as sensitivity to environmental disturbances. However, to date, the intrinsic Q of integrated all-waveguide resonators has been relegated to below 150 Million. Here, we report an all-waveguide Si3N4 resonator with an intrinsic Q of 422 Million and a 3.4 Billion absorption loss limited Q. The resonator has a 453 k…
Energy-efficient optical control of photonic device properties is crucial for diverse photonic signal processing. Here we demonstrate extremely efficient optical tuning of photonic nanocavities, with only photon-level optical energy. With a lithium niobate photonic crystal nanocavity with an optical Q up to 1.41 million and an effective mode volume down to 0.78$(λ/n)^3$, we are able to achieve a resonance tuning rate of about 88.4~MHz/photon (0.67~GHz/aJ), which allows us to tune across the whole cavity resonance with only about 2.4 photons on average inside the cavity. Such a photon-level res…
We investigate the design, fabrication and experimental characterization of high Quality factor photonic crystal nanobeam cavities in silicon. Using a five-hole tapered 1D photonic crystal mirror and precise control of the cavity length, we designed cavities with theoretical Quality factors as high as 14 million. By detecting the cross-polarized resonantly scattered light from a normally incident laser beam, we measure a Quality factor of nearly 750,000. The effect of cavity size on mode frequency and Quality factor was simulated and then verified experimentally.
A design for an ultra-high Q photonic crystal nanocavity engineered to interact with nitrogen-vacancy (NV) centers located near the surface of a single crystal diamond sample is presented. The structure is based upon a nanowire photonic crystal geometry, and consists of a patterned high refractive index membrane, such as gallium phosphide (GaP), supported by a diamond substrate. The nanocavity supports a mode with quality factor Q > 1.5 million and mode volume V < 0.52 (λ/n_\text{GaP})^3, and promises to allow Purcell enhanced collection of spontaneous emission from an NV located more than 50 …
We present the design and simulation of a three-dimensional photonic crystal waveguide for linear laser-driven acceleration in vacuum. The structure confines a synchronous speed-of-light accelerating mode in both transverse dimensions. We report the properties of this mode, including sustainable gradient and optical-to-beam efficiency. We present a novel method for confining a particle beam using optical fields as focusing elements. This technique, combined with careful structure design, is shown to have a large dynamic aperture and minimal emittance growth, even over millions of optical wavel…
Photonic-crystal-based integrated optical systems have been used for a broad range of sensing applications with great success. This has been motivated by several advantages such as high sensitivity, miniaturization, remote sensing, selectivity and stability. Many photonic crystal sensors have been proposed with various fabrication designs that result in improved optical properties. In parallel, integrated optical systems are being pursued as a platform for photonic quantum information processing using linear optics and Fock states. Here we propose a novel integrated Fock state optical sensor a…
Photonic integrated circuits play a central role in current and future applications such as communications, sensing, ranging, and information processing. Photonic quantum computing will also likely require an integrated optics architecture for improved stability, scalability, and performance. Fault-tolerant quantum computing mandates very accurate and robust quantum gates. In this work, we demonstrate high-fidelity directional couplers for single-qubit gates in photonic integrated waveguides, utilizing a novel scheme of detuning-modulated composite segments. Specific designs for reduced sensit…
Photonic resonators allowing to confine the electromagnetic field in ultra-small volumes and with long decay times are crucial to a number of applications requiring enhanced nonlinear effects. For applications to integrated photonic devices on chip, compactness and optimized in-plane transmission become relevant figures of merit as well. Here we optimize an encapsulated Si/SiO$_2$ photonic crystal nanobeam cavity at telecom wavelengths by means of a global optimization procedure, where only the first few holes surrounding the cavity are varied to decrease its radiative losses. This strategy al…
We fabricate and experimentally characterize a $H0$ photonic crystal slab nanocavity with a design optimized for maximal quality factor, $Q = 1.7$ million. The cavity, fabricated from a silicon slab, has a resonant mode at $λ= 1.59 \mathrm{μm}$ and a measured $Q$-factor of $400,000$. It displays nonlinear effects, including high-contrast optical bistability, at a threshold power among the lowest ever reported for a silicon device. With a theoretical modal volume as small as $V = 0.34(λ/n)^3$, this cavity ranks among those with the highest $Q/V$ ratios ever demonstrated, while having a small fo…
We report on the design, fabrication and optical characterization of bichromatic photonic crystal cavities in thin silicon membranes, with resonances around 1550 nm wavelength. The cavity designs are based on a recently proposed photonic crystal implementation of the Aubry-André-Harper bichromatic potential, which relies on the superposition of two one-dimensional lattices with non-integer ratio between the periodicity constants. In photonic crystal nanocavities, this confinement mechanism is such that optimized figures of merit can be straightforwardly achieved, in particular an ultra-high-Q …
We propose a method to directly visualize the photonic band-structure of micron size photonic crystals using wide angle spectroscopy. By extending Fourier Imaging Spectroscopy sensitivity into the infrared range we have obtained accurate measurements of the band-structures along the high-symmetry directions (X-W-K-L-U) of polymeric three-dimensional rod-connected diamond photonic crystals. Our implementation also allows us to record single-wavelength reflectance far field patterns showing a very good agreement with simulations of the same designs. This technique is suitable for the characteriz…
We demonstrate integrated photonic circuits for quantum devices using sputtered polycrystalline aluminum nitride (AlN) on insulator. The on-chip AlN waveguide directional couplers, which are one of the most important components in quantum photonics, are fabricated and show the output power splitting ratios from 50:50 to 99:1. The polarization beam splitters with an extinction ratio of more than 10 dB are also realized from the AlN directional couplers. Using the fabricated AlN waveguide beam splitters, we observe the Hong-Ou-Mandel interference with a visibility of 91.7 +(-) 5.66 %.
Currently, direct-write waveguide fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics. Devices such as buried waveguides, power splitters, couplers, gratings and optical amplifiers have all been demonstrated. Waveguide properties depend critically on the sample material properties and writing laser characteristics. In this paper we discuss the challenges facing researchers using the femtosecond laser direct-write technique with specific emphasis being placed on the suitability of fused silica and phosphate glass as device h…
Integrated photonics is a leading platform for quantum technologies including nonclassical state generation \cite{Vergyris:2016-35975:SRP, Solntsev:2014-31007:PRX, Silverstone:2014-104:NPHOT, Solntsev:2016:RPH}, demonstration of quantum computational complexity \cite{Lamitral_NJP2016} and secure quantum communications \cite{Zhang:2014-130501:PRL}. As photonic circuits grow in complexity, full quantum tomography becomes impractical, and therefore an efficient method for their characterization \cite{Lobino:2008-563:SCI, Rahimi-Keshari:2011-13006:NJP} is essential. Here we propose and demonstrate…
Cavity quantum electrodynamics studies light-matter interactions at single quanta level. Chiral photon-emitter coupling in photonic structures is characterized as unidirectional propagation locked by the local polarization of light. However, to realize the strong interaction of photon-emitter with direction-locked propagation, which will bring novel applications in nonreciprocal quantum devices, has not been reported yet. Here, we propose the coupled photonic crystal and metallic nanoparticle structure, where through strong local field with high helicity, the rate of circularly polarized photo…
Topology manifesting in many branches of physics deepens our understanding on state of matters. Topological photonics has recently become a rapidly growing field since artificial photonic structures can be well designed and constructed to support topological states, especially a promising large-scale implementation of these states using photonic chips. Meanwhile, due to the inapplicability of Hall conductance to photons, it is still an elusive problem to directly measure the integer topological invariants and topological phase transitions for photons. Here, we present a direct observation of t…
We show the designs of one- and two-dimensional photonic negative index metamaterials around telecom wavelengths. Designed bulk structures are inherently connected, which render their fabrication feasible by direct laser writing and chemical vapor deposition.
Silicon carbide (SiC) is rapidly emerging as a leading platform for the implementation of nonlinear and quantum photonics. Here, we find that commercial SiC, which hosts a variety of spin qubits, possesses low optical absorption that can enable SiC integrated photonics with quality factors exceeding $10^7$. We fabricate microring resonators with quality factors as high as 1.1 million, and observe low-threshold (8.5 $\pm$ 0.5 mW) optical parametric oscillation as well as optical microcombs spanning 200 nm. Our demonstration is an essential milestone in the development of photonic devices that h…
Controlling the dispersion and directionality of the emission of nanosources is one of the major goals of nanophotonics research. This control will allow the development of highly efficient nanosources even at the single photon level. One of the ways to achieve this goal is to couple the emission to Bloch modes of periodic structures. Here, we present the first measurements of the directional emission from nanowire photonic crystals by using Fourier microscopy. With this technique we efficiently collect and resolve the directional emission of nanowires within the numerical aperture of a micros…
A rigorous formulation of the canonical boundary-value problem is presented to find the surface plasmon-polariton waves guided by the interface of a one-dimensional photonic crystal and metal along the direction of the periodicity. The problem is formulated using the rigorous coupled-wave approach and a dispersion equation has been obtained. The Muller's method and Newton--Raphson method were used to obtain illustrative numerical results of the dispersion equation. The solutions were found to converge as the number of Floquet harmonics increased. This formulation does not require the computati…
Large cross-section GaN waveguides are proposed as a suitable architecture to achieve integrated quantum photonic circuits. Directional couplers with this geometry have been designed with aid of the beam propagation method and fabricated using inductively coupled plasma etching. Scanning electron microscopy inspection shows high quality facets for end coupling and a well defined gap between rib pairs in the coupling region. Optical characterization at 800 nm shows single-mode operation and coupling-length-dependent splitting ratios. Two photon interference of degenerate photon pairs has been o…
Topological on-chip photonics based on tailored photonic crystals (PhC) that emulate quantum valley Hall effects has recently gained widespread interest due to its promise of robust unidirectional transport of classical and quantum information. We present a direct quantitative evaluation of topological photonic edge eigenstates and their transport properties in the telecom wavelength range using phase-resolved near-field optical microscopy. Experimentally visualizing the detailed sub-wavelength structure of these modes propagating along the interface between two topologically non-trivial mirro…
Topological protection in photonics offers new prospects for guiding and manipulating classical and quantum information. The mechanism of spin-orbit coupling promises the emergence of edge states that are helical; exhibiting unidirectional propagation that is topologically protected against back-scattering. We directly observe the topological states of a photonic analogue of electronic materials exhibiting the quantum Spin Hall effect, living at the interface between two silicon photonic crystals with different topological order. Through the far-field radiation that is inherent to the states' …
Photonic crystal (PhC) nanocavities have demonstrated unique capabilities in terms of light confinement and manipulation. As such, they are becoming attractive for the design of novel resonance-based photonic integrated circuits (PICs). Here two essential challenges arise however - how to realize ultrahigh-Q PhC cavities using standard fabrication processes compatible with large volume fabrication, and how to efficiently integrate them with other standard building blocks, available in exiting PIC platforms. In this work, we demonstrate ultrahigh-Q 1D PhC nanocavities fabricated on a 300 mm SOI…
We optimize a silica-encapsulated silicon L3 photonic crystal cavity for ultra-high quality factor by means of a global optimization strategy, where the closest holes surrounding the cavity are varied to minimize out-of-plane losses. We find an optimal value of $Q_c=4.33\times10^7$, thus setting a new record for encapsulated low-index-contrast photonic crystal cavities. We also address the effects of structural imperfections on our optimal cavity design and predict an averaged $Q_c$ in the 2 million regime for state-of-the-art silicon fabrication tolerances.
Third harmonic generation microscopy has been used to analyze the morphology of photonic structures created using the femtosecond laser direct-write technique. Three dimensional waveguide arrays and waveguide-Bragg gratings written in fused-silica and doped phosphate glass were investigated. A sensorless adaptive optical system was used to correct the optical aberrations occurring in the sample and microscope system, which had a lateral resolution of less than 500 nm. This non-destructive testing method creates volume reconstructions of photonic devices and reveals details invisible to other l…
Spontaneous emission from excitonic transitions in InAs/GaAs quantum dots embedded in photonic crystal waveguides at 5K into non-guided and guided modes is determined by direct hyperspectral imaging. This enables measurement of the absolute coupling efficiency into the guided modes, the beta-factor, directly, without assumptions on decay rates used previously. Notably, we found beta-factors above 90% over a wide spectral range of 40meV in the fast light regime, reaching a maximum of (99 $\pm$ 1)%. We measure the directional emission of the circularly polarized transitions in a magnetic field i…
Photonic crystal materials are based on a periodic modulation of the dielectric constant on length scales comparable to the wavelength of light. These materials can exhibit photonic band gaps; frequency regions for which the propagation of electromagnetic radiation is forbidden due to the depletion of the density of states. In order to exhibit a full band gap, 3D PCs must present a threshold refractive index contrast that depends on the crystal structure. In the case of the so-called woodpile photonic crystals this threshold is comparably low, approximately 1.9 for the direct structure. Theref…
We recently formulated the canonical boundary-value problem of propagation of surface plasmon-polariton (SPP) waves along the direction of periodicity of a one-dimensional photonic crystal. Here we present the general formulation of that canonical problem supporting the oblique propagation of SPP waves in the interface plane. The general dispersion equation has been obtained using the rigorous coupled-wave approach for the oblique propagation and numerically solved using the Muller's method. A periodicity in the wavenumbers of the SPP waves was observed. Furthermore, the regions of high losses…
Infrared optical photonic crystals fabricated using direct laser writing, which is based on the two-photon polymerization of suitable monomers, have received substantial interest since the emergence of this process. Two-photon polymerization could be a disruptive technology for the fabrication of all-dielectric photonic crystals in the infrared spectral range, as it allows the synthesis of large scale arrays of uniform structures with arbitrary geometries and arrangements. However, all-dielectric photonic crystals that provide birefringent optical responses in the infrared spectral range have …
Silicon nitride (Si3N4) ring resonators are critical for a variety of photonic devices. However the intrinsically high film stress of silicon nitride has limited both the optical confinement and quality factor (Q) of ring resonators. We show that stress in Si3N4 films can be overcome by introducing mechanical trenches for isolating photonic devices from propagating cracks. We demonstrate a Si3N4 ring resonator with an intrinsic quality factor of 7 million, corresponding to a propagation loss of 4.2 dB/m. This is the highest quality factor reported to date for high confinement Si3N4 ring resona…
The reflecting features (reflected spectrum and phase) on the surface of pure-material plate depend on refractive index, extinction coefficient, incident angle, polarization direction and so on. The features, however, do not depend on a cut surface that is another uniformly processed surface in the same direction, which is obtained by being cut, etched and polished for example. In this work, the special reflecting features of a three-dimensional (3D) terahertz photonic crystal (PC) depending on the cut-surface oriented in the same direction [001], have been studied especially within photonic b…
Chiral light matter interaction enables new fundamental researches and applications of light. The interaction has traditionally faced challenges in low directionality and efficiency based on spin orbit interaction of light in microscopic waveguides. It is pivotal to exploit photonic integrated circuits to efficiently engineer photonic chiral behavior. Here, we present ultra directional high efficient chiral coupling in silicon photonic circuits based on low order to high order mode conversion and interference. We show that the directionality of chiral coupling, in principle, can approach minus…
Coupling individual quantum systems lies at the heart of building scalable quantum networks. Here, we report the first direct photonic coupling between a semiconductor quantum dot and a trapped ion and we demonstrate that single photons generated by a quantum dot controllably change the internal state of an $\textrm{Yb}^+$ ion. We ameliorate the effect of the sixty-fold mismatch of the radiative linewidths with coherent photon generation and a high-finesse fiber-based optical cavity enhancing the coupling between the single photon and the ion. The transfer of information presented here via the…
We present the blueprint for a novel negative-index metamaterial. This structure is fabricated via three-dimensional two-photon direct laser writing and silver shadow evaporation. The comparison of measured linear optical spectra with theory shows good agreement and reveals a negative real part of the refractive index at around 3.85 micrometer wavelength - despite the fact that the metamaterial structure is bi-anisotropic due to the lack of inversion symmetry along its surface normal.
Photonic scattering materials, such as biological tissue and white paper, are made of randomly positioned nanoscale inhomogeneities in refractive index that lead to multiple scattering of light. Typically these materials, both naturally-occurring or man-made, are formed through self assembly of the scattering inhomogeneities, which imposes challenges in tailoring the disorder and hence the optical properties. Here, We report on the nanofabrication of photonic scattering media using direct laser writing with deterministic design. These deterministic scattering media consist of submicron thick p…
Optical waveguide segments based on geometrically unbound photonic crystal fibers (PCF) designs could be exploited as building blocks to realize miniaturized complex devices which implement advanced photonic operations. Here, we show how to fabricate optical waveguide segments with PCF designs by direct high-resolution 3D printing and how the combination of these segments can realise complex photonic devices. We demonstrate the unprecedented precision and flexibility of our method by fabricating the first-ever fiber polarising beam splitter based on PCFs. The device was directly printed in one…
