Relativistic electrons in a structured medium generate radiative losses such as Cherenkov and transition radiation that act as a virtual light source, coupling to the photonic densities of states. The effect is most pronounced when the imaginary part of the dielectric function is zero, a regime where in a non-retarded treatment no loss or coupling can occur. Maps of the resultant energy losses as a sub-5nm electron probe scans across finite waveguide structures reveal spatial distributions of optical modes in a spectral domain ranging from near-infrared to far ultraviolet.
We demonstrate an 8 by 14 Gbps compatible WDM link based on a single-section semiconductor mode-locked laser, silicon photonics resonant ring modulators and joint channel reamplification with a semiconductor optical amplifier operated in the linear regime. Individual channels reach a data rate of 25 Gbps with signal quality-factors above 7.
Surface nanoscale axial photonics (SNAP) structures are fabricated with a femtosecond laser for the first time. The inscriptions introduced by the laser pressurize the fiber and cause its nanoscale effective radius variation. We demonstrate the subangstrom precise fabrication of individual and coupled SNAP microresonators having the effective radius variation of several nanometers. Our results pave the way to a novel ultraprecise SNAP fabrication technology based on the femtosecond laser inscription.
Recently introduced Surface Nanoscale Axial Photonics (SNAP) makes it possible to fabricate high Q-factor microresonators and other photonic microdevices by dramatically small deformation of the optical fiber surface. To become a practical and robust technology, the SNAP platform requires methods enabling reproducible modification of the optical fiber radius at nanoscale. In this Letter, we demonstrate super-accurate fabrication of high Q-factor microresonators by nanoscale modification of the optical fiber radius and refractive index using the CO2 laser and the UV excimer laser beam exposures…
We report on the fabrication and characterization of photonic-based nanothermometers, a silicon photonic Bragg grating and photonic crystal cavity. When cladded with silicon dioxide layer the sensors have at least eight times better sensitivity compared to the sensitivity of conventional fiber Bragg grating sensors. We demonstrate that these photonic thermometers are a viable temperature sensing solution.
We experimentally demonstrate series of identical two, three, and five coupled high Q-factor Surface Nanoscale Axial Photonics (SNAP) microresonators formed by periodic nanoscale variation of the optical fiber radius. These microresonators are fabricated with a 100 \mum period along an 18 \mum radius optical fiber. The axial FWHM of these microresonators is 80 \mum and their Q-factor exceeds 107. In addition, we demonstrate a SNAP microresonator with the axial FWHM as small as 30 \mum and the axial FWHM of the fundamental mode as small as 10 \mum. These results may potentially enable the dense…
The Luneburg lens is an aberration-free lens that focuses light from all directions equally well. We fabricated and tested a Luneburg lens in silicon photonics. Our technique is sufficiently versatile for making perfect imaging devices on silicon platforms.
We report systematic studies of plasmonic and photonic guiding modes in large-area chemical-vapor-deposition-grown graphene on nanostructured silicon substrates. Light interaction in graphene with substrate photonic crystals can be classified into four distinct regimes depending on the photonic crystal lattice constant and the various modal wavelengths (i.e. plasmonic, photonic and free-space). By optimizing the design of the substrate, these resonant modes can magnify the graphene absorption in infrared wavelength, for efficient modulators, filters, sensors and photodetectors on silicon photo…
Quantum sensors with solid state electron spins have attracted considerable interest due to their nanoscale spatial resolution.A critical requirement is to suppress the environment noise of the solid state spin sensor.Here we demonstrate a nanoscale thermometer based on silicon carbide (SiC) electron spins.We experimentally demonstrate that the performance of the spin sensor is robust against dephasing due to a self protected machenism. The SiC thermometry may provide a promising platform for sensing in a noisy environment ,e.g. biological system sensing.
The majority of silicon photonics is built on silicon-on-insulator (SOI) wafers while the majority of electronics, including CPUs and memory, are built on bulk silicon wafers, limiting broader acceptance of silicon photonics. This discrepancy is a result of silicon photonics's requirement for a single-crystalline silicon (c-Si) layer and a thick undercladding for optical guiding that bulk silicon wafers to not provide. While the undercladding problem can be partially addressed by substrate removal techniques, the complexity of co-integrating photonics with state-of-the-art transistors and real…
Optical computing accelerators may help alleviate bandwidth and power consumption bottlenecks in electronics. We show an approach to implementing logarithmic-type analog co-processors in silicon photonics and use it to perform the exponentiation operation. The function is realized by exploiting nonlinear-absorption-enhanced Raman amplification saturation in a silicon waveguide.
While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic silicon waveguides for the first time, yielding 3000 times stronger forward SBS responses than any previous waveguide system. Simulations reveal that a coherent combination of electrostrictive forces a…
Dense photonic integration promises to revolutionize optical computing and communications. However, efforts towards this goal face unacceptable attenuation of light caused by surface roughness in microscopic devices. Here we address this problem by introducing Surface Nanoscale Axial Photonics (SNAP). The SNAP platform is based on whispering gallery modes circulating around the optical fiber surface and undergoing slow axial propagation readily described by the one-dimensional Schrödinger equation. These modes can be steered with dramatically small nanoscale variation of the fiber radius, whic…
Classical electromagnetic boundary conditions (EMBCs) fail to describe quantum interface phenomena at nanoscale. Here, we construct the interface model with a transition layer describing the electromagnetic field inhomogeneity across the interface. Generalized nanoscale EMBCs are derived by introducing the magnetic interfacial response functions (IRFs) and are rewritten as three different forms based on Maxwell's equations in first order approximation. The corresponding Fresnel formula are further used to analyze the interfacial photonic phenomenon, demonstrating interesting behaviors of Brews…
We propose the use of silicon graphene waveguides to implement a tunable broadband microwave photonics phase shifte based on integrated ring cavities. Numerical computation results show the feasibility for broadband operation over 40 GHz bandwidth and full 360 degree radiofrequency phase-shift with a modest voltage excursion of 0.12 volt.
One dimensional nanobeam photonic crystal cavities are fabricated in silicon dioxide with silicon nanocrystals. Quality factors of over 9 x 10^3 are found in experiment, matching theoretical predictions, with mode volumes of 1.5(lambda/n)^3 . Photoluminescence from the cavity modes is observed in the visible wavelength range 600-820 nm. Studies of the lossy characteristics of the cavities are conducted at varying temperatures and pump powers. Free carrier absorption effects are found to be significant at pump powers as low as a few hundred nanowatts.
We present the first demonstration of an integrated photonic phase-change memory using GeSbTe-225 on silicon-on-insulator and demonstrate reliable multilevel operation with a single programming pulse. We also compare our results on silicon with previous demonstrations on silicon nitride. Crucially, achieving this on silicon enables tighter integration of traditional electronics with photonic memories in future, making phase-change photonic memory a viable and integrable technology.
We fabricate silicon waveguides in silicon-on-insulator (SOI) wafers clad with either silicon dioxide, silicon nitride, or aluminum oxide, and by measuring the electro-optic behavior of ring resonators, we characterize the cladding-dependent and capacitively-induced free-carrier effects in each of these waveguides. By comparing our measured data with simulation results, we confirm that the observed voltage dependencies of the transmission spectra are due to changes in the concentrations of holes and electrons within the semiconductor waveguide, and we show for the first time how strongly these…
An effort was conducted to numerically determine, using the Nonlinear Schrodinger Split-Step Fourier method, if using cross phase modulation could cause temporal soliton pulse propagation in a silicon slow-light photonic crystal waveguide shorter than a millimeter. The simulations demonstrated that due to the higher powers and shorter scales of photonic crystals, two-photon absorption would cause an optical soliton pulse to be extremely dissipative. The model demonstrated, however, that by utilizing cross-phase modulation, it is possible to sustain a compressed soliton pulse within a silicon p…
We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that patterning electrodes on such a system can yield an electro-optic coupling rate of 0.6 GHz/V (4 pm/V).
The spectra of silicon integrated waveguides are tailored to process analog computing (i.e.,differential and integral) in optical domain with huge bandwidth.With the theory of signal and system, we design some silicon integrated devices to implement photonic differentiator and optical differential equation solver. The basic principle is to tailor the spectra of silicon integrated waveguides to meet the requirements of analog computing circuits. These analog photonic integrated circuits are very promising in future computing systems with high speed, low cost, and compact size. We also plan to e…
Optical isolation is a long pursued object with fundamental difficulty in integrated photonics. As a step towards this goal, we demonstrate the design, fabrication, and characterization of on-chip wavelength-scale optical diodes that are made from the heterojunction between two different silicon two-dimensional square-lattice photonic crystal slabs with directional bandgap mismatch and different mode transitions. The measured transmission spectra show considerable unidirectional transmission behavior, in good agreement with numerical simulations. The experimental realization of on-chip optical…
On-chip photonic networks have the potential to transmit and route information more efficiently than electronic circuits. Recently, a number of silicon-based optical devices including modulators, buffers, and wavelength converts have been reported. However, a number of technical challenges need to be overcome before these devices can be combined into network-level architectures. In particular, due to the high refractive index contrast between the core and cladding of semiconductor waveguides, nanoscale defects along the waveguide often scatter light into the backward-propagating mode. These re…
In this work we show theoretically that it is possible to design a large band gap in the infrared range using a one-dimensional Photonic Crystal heterostructure made of porous silicon. Stacking together multiple photonic crystal substructures of the same contrast index, but of different lattice periods, it is possible to broad the narrow forbidden band gap that can be reached by the low contrast index of the porous silicon multilayers. The main idea in this work is that we can construct a Giant Photonic Band Gap -as large as desired- by combining a tandem of photonic crystals substructures by …
On-chip optical isolators play a key role in optical communications and computing based on silicon integrated photonic structures. Recently there have raised great attentions and hot controversies upon isolation of light via linear and passive photonic structures. Here we analyze the optical isolation properties of a silicon photonic crystal slab heterojunction diode by comparing the forward transmissivity and round-trip reflectivity of in-plane infrared light across the structure. The round-trip reflectivity is much smaller than the forward transmissivity, justifying good isolation. The consi…
We demonstrate the first functional signal processing device based on stimulated Brillouin scattering in a silicon nanowire. We use only 1 dB of on-chip SBS gain to create an RF photonic notch filter with 48 dB of suppression, 98 MHz linewidth, and 6 GHz frequency tuning. This device has potential applications in on-chip microwave signal processing and establishes the foundation for the first CMOS-compatible high performance RF photonic filter.
We demonstrate a fully coherent supercontinuum spectrum spanning 500 nm from a silicon-on-insulator photonic wire waveguide pumped at 1575 nm wavelength. An excellent agreement with numerical simulations is reported. The simulations also show that a high level of two-photon absorption can essentially enforce the coherence of the spectral broadening process irrespective of the pump pulse duration.
We experimentally demonstrate phase sensitive amplification (PSA) in a silicon photonic crystal waveguide based on pump-degenerate four-wave mixing. An 11 dB phase extinction ratio is obtained in a record compact 196 μm nanophotonic device due to broadband slow-light, in spite of the presence of two-photon absorption and free-carriers. Numerical calculations show good agreement with the experimental results.
We report a theoretical study of Stimulated Brillouin Scattering (SBS) in general anisotropic media, incorporating the effects of both acoustic strain and local rotation in all calculations. We apply our general theoretical framework to compute the SBS gain for layered media with periodic length scales smaller than all optical and acoustic wavelengths, where such composites behave like homogeneous anisotropic media. We theoretically predict that a layered medium comprising nanometre-thin layers of silicon and As$_2$S$_3$ glass possesses a bulk SBS gain of $1.28 \times 10^{-9} \, \mathrm{W}^{-1…
There has been a recently renewed interest in neuromorphic photonics, a field promising to access pivotal and unexplored regimes of machine intelligence. Progress has been made on isolated neurons and analog interconnects; nevertheless, this renewal has yet to produce a demonstration of a silicon photonic neuron capable of interacting with other like neurons. We report a modulator-class photonic neuron fabricated in a conventional silicon photonic process line. We demonstrate behaviors of transfer function configurability, fan-in, inhibition, time-resolved processing, and, crucially, autaptic …
The emerging applications of silicon photonics in free space, such as LiDARs and quantum photonics, urge versatile emission shaping beyond the capabilities of conventional grating couplers. A platform that offers arbitrary shaping of free-space emission while maintaining the CMOS compatibility and monolithic integration is in pressing need. Here we demonstrate a platform that integrates metasurfaces monolithically on silicon photonic integrated circuits. The metasurfaces consist of amorphous silicon nanopillars evanescently coupled to silicon waveguides. We demonstrate experimentally diffracti…
Recently, a silicon micromachining method to produce tetrahedral silicon particles was discovered. In this report we determine, using band structure calculations, the optical properties of diamond-lattice photonic crystals when assembled from such particles. We show that crystal structures built from silicon tetrahedra are expected to display small stop gaps. Wide photonic band gaps appear when truncated tetrahedral particles are used to build the photonic crystals. With truncated tetrahedral particles a band gap with a width of 23.6% can be achieved, which is more than twice as wide compared …
One dimensional nano-beam photonic crystal cavities fabricated in silicon dioxide are considered in both simulation and experiment. Quality factors of over 10^4 are found via simulation, while quality factors of over 5*10^3 are found in experiment, for cavities with mode volumes of 2.0 cubic wavelengths (in oxide) and in the visible wavelength range (600-716nm). The dependences of the cavity quality factor and mode volume for different design parameters are also considered.
We have studied the reflectivity of CMOS-compatible three-dimensional silicon inverse woodpile photonic crystals at near-infrared frequencies. Polarization-resolved reflectivity spectra were obtained from two orthogonal crystal surfaces corresponding to 1.88 pi sr solid angle. The spectra reveal broad peaks with high reflectivity up to 67 % that are independent of the spatial position on the crystals. The spectrally overlapping reflectivity peaks for all directions and polarizations form the signature of a broad photonic band gap with a relative bandwidth up to 16 %. This signature is supporte…
As photonics breaks away from today's device level toward large scale of integration and complex systems-on-a-chip, concepts like monitoring, control and stabilization of photonic integrated circuits emerge as new paradigms. Here, we show non-invasive monitoring and feedback control of high quality factor silicon photonics resonators assisted by a transparent light detector directly integrated inside the cavity. Control operations are entirely managed by a CMOS microelectronic circuit, hosting many parallel electronic read-out channels, that is bridged to the silicon photonics chip. Advanced f…
We propose a new type of bistable device for silicon photonics, using the self-electro-optic effect within an optical cavity. Since the bistability does not depend on the intrinsic optical nonlinearity of the material, but is instead engineered by means of an optoelectronic feedback, it appears at low optical powers. This bistable device satisfies all the basic criteria required in an optical switch to build a scalable digital optical computing system.
Quantum-dot (QD) nanolasers integrated on a silicon photonic circuit are demonstrated for the first time. QD nanolasers based on one-dimensional photonic crystal nanocavities containing InAs/GaAs QDs are integrated on CMOS-processed silicon waveguides cladded by silicon dioxide. We employed transfer-printing, whereby the three-dimensional stack of photonic nanostructures is assembled in a simple pick-and-place manner. Lasing operation and waveguide-coupling of an assembled single nanolaser are confirmed through micro-photoluminescence spectroscopy. Furthermore, by repetitive transfer-printing,…
Besides being the foundational material for microelectronics, in optics, crystalline silicon has long been used for making infrared lenses and mirrors. More recently, silicon has become the key material to achieve large-scale integration of photonic devices for optical interconnect and telecommunication. For optics, silicon has significant advantages: it offers a very high refractive index and is highly transparent in the spectral range from 1.2 to 8 micron. To fully exploit silicon's superior performance in a remarkably broad range and to enable new optoelectronic functionalities, here we des…
We present a new approach to long range coupling based on a combination of adiabatic passage and lateral leakage in thin shallow ridge waveguides on a silicon photonic platform. The approach enables transport of light between two isolated waveguides through a mode of the silicon slab that acts as an optical bus. Due to the nature of the adiabatic protocol, the bus mode has minimal population and the transport is highly robust. We prove the concept and examine the robustness of this approach using rigorous modelling. We further demonstrate the utility of the approach by coupling power between t…
We demonstrate the efficient coupling (99.5%) of a silica whispering gallery mode microresonator directly with a silicon chip by using a silicon photonic crystal waveguide as a coupler. The efficient coupling is attributed to the small effective refractive index difference between the two devices. The large group index of the photonic crystal waveguide mode also contributes to the efficient coupling. A coupling Q of 2.68*10^6 is obtained, which allows us to achieve the critical coupling of a silica whispering gallery mode with an intrinsic Q of close to 10^7 with a Si chip.
Photonic systems for high-performance information processing have attracted renewed interest. Neuromorphic silicon photonics has the potential to integrate processing functions that vastly exceed the capabilities of electronics. We report first observations of a recurrent silicon photonic neural network, in which connections are configured by microring weight banks. A mathematical isomorphism between the silicon photonic circuit and a continuous neural network model is demonstrated through dynamical bifurcation analysis. Exploiting this isomorphism, a simulated 24-node silicon photonic neural …
Nano-resonator integrated with two-dimensional materials (e.g. transition metal dichalcogenides) have recently emerged as a promising nano-optoelectronic platform. Here we demonstrate resonatorenhanced second-harmonic generation (SHG) in tungsten diselenide using a silicon photonic crystal cavity. By pumping the device with the ultrafast laser pulses near the cavity mode at the telecommunication wavelength, we observe a near visible SHG with a narrow linewidth and near unity linear polarization, originated from the coupling of the pump photon to the cavity mode. The observed SHG is enhanced by…
Optical fiber tapers are used to collect photoluminescence emission at ~1.5 um from photonic crystal cavities fabricated in erbium doped silicon nitride on silicon. Photoluminescence collection via fiber taper is enhanced 2.5 times relative to free space, with a total taper collection efficiency of 53%. By varying the fiber taper offset from the cavity, a broad tuning range of coupling strength is obtained. This material system combined with fiber taper collection is promising for building on-chip optical amplifiers.
We report an optical link on silicon using micrometer-scale ring-resonator enhanced silicon modulators and waveguide-integrated germanium photodetectors. We show 3 Gbps operation of the link with 0.5 V modulator voltage swing and 1.0 V detector bias. The total energy consumption for such a link is estimated to be ~120 fJ/bit. Such compact and low power monolithic link is an essential step towards large-scale on-chip optical interconnects for future microprocessors.
Strongly enhanced third-harmonic generation (THG) by the topological localization of an edge mode in a Su-Schrieffer-Heeger (SSH) chain of silicon photonic crystal nanocavities is demonstrated. The edge mode of the nanocavity chain not only naturally inherits resonant properties of the single nanocavity, but also exhibits the topological feature with mode robustness extending well beyond individual nanocavity. By engineering the SSH nanocavities with alternating strong and weak coupling strengths on a silicon slab, we observe the edge mode formation that entails a THG signal with three orders …
We examine the cavity resonance tuning of high-Q silicon photonic crystal heterostructures by localized laser-assisted thermal oxidation using a 532 nm continuous wave laser focused to a 2.5 mm radius spot-size. The total shift is consistent with the parabolic rate law. A tuning range of up to 8.7 nm is achieved with ~ 30 mW laser powers. Over this tuning range, the cavity Q decreases from 3.2\times10^5 to 1.2\times10^5. Numerical simulations model the temperature distributions in the silicon photonic crystal membrane and the cavity resonance shift from oxidation.
Four-wave mixing is observed in a silicon W1 photonic crystal waveguide. The dispersion dependence of the idler conversion efficiency is measured and shown to be enhanced at wavelengths exhibiting slow group velocities. A 12-dB increase in the conversion efficiency is observed. Concurrently, a decrease in the conversion bandwidth is observed due to the increase in group velocity dispersion in the slow-light regime. The experimentally observed conversion efficiencies agree with the numerically modeled results.
Deterministically integrating single solid-state quantum emitters with photonic nanostructures serves as a key enabling resource in the context of photonic quantum technology. Due to the random spatial location of many widely-used solid-state quantum emitters, a number of positoning approaches for locating the quantum emitters before nanofabrication have been explored in the last decade. Here, we review the working principles of several nanoscale positioning methods and the most recent progress in this field, covering techniques including atomic force microscopy, scanning electron microscopy, …
Visible and near-infrared spectrum photonic integrated circuits are quickly becoming a key technology to address the scaling challenges in quantum information and biosensing. Thus far, integrated photonic platforms in this spectral range have lacked integrated photodetectors. Here, we report the first silicon nitride-on-silicon waveguide photodetectors that are monolithically integrated in a visible light photonic platform on silicon. Owing to a leaky-wave silicon nitride-on-silicon design, the devices achieved a high external quantum efficiency of > 60% across a record wavelength span from $λ…
Here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometeric modulator, exhibiting a miniscule VpL of 95 V-um, deploying a sub-wavelength short electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics.
Resistance thermometry is a time-tested method for taking temperature measurements. In recent years fundamental limits to resistance-based approaches spurred considerable interest in developing photonic temperature sensors as a viable alternative. In this study we demonstrate that our photonic thermometer, which consists of a silicon waveguide integrated with a Bragg grating, can be used to measure temperature changes over the range from 5 C to 160 C with a combined expanded uncertainty [k = 2 ; 95% confidence level] of 1.25 degree C. The computational modeling of the sensor predicts the reson…
Silicon is now firmly established as a high performance photonic material. Its only weakness is the lack of a native electrically driven light emitter that operates CW at room temperature, exhibits a narrow linewidth in the technologically important 1300- 1600 nm wavelength window, is small and operates with low power consumption. Here, an electrically pumped all-silicon nano light source around 1300-1600 nm range is demonstrated at room temperature. Using hydrogen plasma treatment, nano-scale optically active defects are introduced into silicon, which then feed the photonic crystal nanocavity…
