We propose a new type of short to moderate block-length, linear error-correcting codes, called moderate-density parity-check (MDPC) codes. The number of ones of the parity-check matrix of the codes presented is typically higher than the number of ones of the parity-check matrix of low-density parity-check (LDPC) codes. But, still lower than those of the parity-check matrix of classical block codes. The proposed MDPC codes are cyclic and are designed by constructing idempotents using cyclotomic cosets. The construction is simple and allows finding short block-length, high-rate codes with good minimum distance. Inspired by some recent iterative soft-input soft-output (SISO) decoders used in a context of classical block codes, we propose a low complexity, efficient, iterative decoder called Auto-Diversity (AD) decoder. AD decoder is based on belief propagation (BP) decoder and takes advantage of the fundamental property of automorphism group of the constructed cyclic code.
The concept of parity check matrices of linear binary codes has been extended by Heden [9] to parity check systems of nonlinear binary codes. In the present paper we extend this concept to parity check systems of nonlinear codes over finite commutative Frobenius rings. Using parity check systems, results on how to get some fundamental properties of the codes are given. Moreover, parity check systems and its connection to characters is investigated and a MacWilliams type theorem on the distance distribution is given.
In this paper we present an extended variant of low rank parity check matrix (LRPC) codes that have received significant interests in recent years. It is shown that the extension indeed yields a superfamily of LRPC codes, which are termed low row rank parity check codes. The decoding method of the proposed codes is also investigated.
A decoding algorithm for $q$-ary low-density parity-check codes over the $q$-ary symmetric channel is introduced. The exchanged messages are lists of symbols from $\Fq$. A density evolution analysis for maximum list sizes $1$ and $2$ is developed. Thresholds for selected regular low-density parity-check code ensembles are computed showing gains with respect to a similar algorithm in the literature. Finite-length simulation results confirm the asymptotic analysis.
In this paper we study reaction and timing attacks against cryptosystems based on sparse parity-check codes, which encompass low-density parity-check (LDPC) codes and moderate-density parity-check (MDPC) codes. We show that the feasibility of these attacks is not strictly associated to the quasi-cyclic (QC) structure of the code but is related to the intrinsically probabilistic decoding of any sparse parity-check code. So, these attacks not only work against QC codes, but can be generalized to broader classes of codes. We provide a novel algorithm that, in the case of a QC code, allows recover…
The connections between variable nodes and check nodes have a great influence on the performance of low-density parity-check (LDPC) codes. Inspired by the unique structure of polar code's generator matrix, we proposed a new method of constructing LDPC codes that achieves a polarization effect. The new code, named as polarized LDPC codes, is shown to achieve lower or no error floor in the binary symmetric channel (BSC)
A Local Tree Structure is NOT Sufficient for the Local Optimality of Message-Passing Decoding in Low Density Parity Check Codes
我们解决的问题，“是一个局部树结构足够的局部最优性的消息传递算法在低密度奇偶检验码？结果表明，答案是否定的。利用这一观察，我们指出了Thomas J. Richardson和Rüdiger L.Urbanke \cite{RUCapacity}的论文“消息传递解码下低密度奇偶校验码的容量”中定理1证明的一个缺陷。我们进一步提供了一个新的证明该定理的基础上不同的论点。
Low-density parity-check (LDPC) codes with the parity-based approach for distributed joint source channel coding (DJSCC) with decoder side information is described in this paper. The parity-based approach is theoretical limit achievable. Different edge degree distributions are used for source variable nodes and parity variable nodes. Particularly, the codeword-averaged density evolution (CADE) is presented for asymmetrically correlated nonuniform sources over the asymmetric memoryless transmission channel. Extensive simulations show that the splitting of variable nodes can improve the coding e…
This paper generalizes the method proposed by Poulliat et al. for the determination of the optimal Galois Field coefficients of a Non-Binary LDPC parity check constraint based on the binary image of the code. Optimal, or almost-optimal, parity check coefficients are given for check degree varying from 4 to 20 and Galois Field varying from GF(64) up to GF(1024). For all given sets of coefficients, no codeword of Hamming weight two exists. A reduced complexity algorithm to compute the binary Hamming weight 3 of a parity check is proposed. When the number of sets of coefficients is too high for a…
We present a novel decoding algorithm for q-ary low-density parity-check codes, termed symbol message passing. The proposed algorithm can be seen as a generalization of Gallager B and the binary message passing algorithm by Lechner et al. to q-ary codes. We derive density evolution equations for the q-ary symmetric channel, compute thresholds for a number of regular low-density parity-check code ensembles, and verify those by Monte Carlo simulations of long channel codes. The proposed algorithm shows performance advantages with respect to an algorithm of comparable complexity from the literatu…
An algorithm for constructing parity-check matrices of non-binary quasi-cyclic low-density parity-check (NB QC-LDPC) codes is proposed. The algorithm finds short cycles in the base matrix and tries to eliminate them by selecting the circulants and the elements of GF(q). Firstly the algorithm tries to eliminate the cycles with the smallest number edges going outside the cycle. The efficiency of the algorithm is demonstrated by means of simulations. In particular, it was shown that NB QC-LDPC codes constructed with use of our algorithm loose less that 0.1 dB in comparison to the best NB LDPC cod…
This paper presents a design technique for obtaining regular time-invariant low-density parity-check convolutional (RTI-LDPCC) codes with low complexity and good performance. We start from previous approaches which unwrap a low-density parity-check (LDPC) block code into an RTI-LDPCC code, and we obtain a new method to design RTI-LDPCC codes with better performance and shorter constraint length. Differently from previous techniques, we start the design from an array LDPC block code. We show that, for codes with high rate, a performance gain and a reduction in the constraint length are achieved…
A quantized message passing decoding algorithm for low-density parity-check codes is presented. The algorithm relies on the min approximation at the check nodes, and on modelling the variable node inbound messages as observations of an extrinsic discrete memoryless channel. The performance of the algorithm is analyzed and compared to quantized min-sum decoding by means of density evolution, and almost closes the gap with the performance of the sum-product algorithm. A stability analysis is derived, which highlights the role played by degree-$3$ variable nodes in the stability condition. Finite…
Polar codes has been selected as the channel coding scheme for 5G new radio (NR) control channel. Specifically, a special type of parity-check polar (PC-Polar) codes was adopted in uplink control information (UCI). In this paper, we propose a parity-check soft-cancellation (PC-SCAN) algorithm and its simplified version to decode PC-Polar codes. The potential benefits are two-fold. First, PC-SCAN can provide soft output for PC-Polar codes, which is essential for advanced turbo receivers. Second, the decoding performance is better than that of successive cancellation (SC). This is due to the fac…
We consider the effect of log-likelihood ratio saturation on belief propagation decoder low-density parity-check codes. Saturation is commonly done in practice and is known to have a significant effect on error floor performance. Our focus is on threshold analysis and stability of density evolution. We analyze the decoder for standard low-density parity-check code ensembles and show that belief propagation decoding generally degrades gracefully with saturation. Stability of density evolution is, on the other hand, rather strongly effected by saturation and the asymptotic qualitative effect of …
This paper investigates the decoding of a remarkable set of lattices: We treat in a unified framework the Leech lattice in dimension 24, the Nebe lattice in dimension 72, and the Barnes-Wall lattices. A new interesting lattice is constructed as a simple application of single parity-check principle on the Leech lattice. The common aspect of these lattices is that they can be obtained via a single parity check or via the k-ing construction. We exploit these constructions to introduce a new efficient paradigm for decoding. This leads to efficient list decoders and quasi-optimal decoders on the Ga…
In this paper, we investigate absorbing sets, responsible of error floors in Low Density Parity Check codes. We look for a concise, quantitative way to rate the absorbing sets' dangerousness. Based on a simplified model for iterative decoding evolution, we show that absorbing sets exhibit a threshold behavior. An absorbing set with at least one channel log-likelihood-ratio below the threshold can stop the convergence towards the right codeword. Otherwise convergence is guaranteed. We show that absorbing sets with negative thresholds can be deactivated simply using proper saturation levels. We …
Recently, Branco da Silva and Silva described an efficient encoding and decoding algorithm for Construction D$^\prime$ lattices. Using their algorithm, we propose a Construction D$^\prime$ lattice based on binary quasi-cyclic low-density parity-check (QC-LPDC) codes and single parity-check product codes. The underlying codes designed by the balanced-distances rule contribute in a balanced manner to the squared minimum distance of the constructed lattice, which results in a high lattice coding gain. The proposed lattice based on IEEE 802.16e QC-LDPC codes is shown to provide competitive error-r…
Puncturing is a well-known coding technique widely used for constructing rate-compatible codes. In this paper, we consider the problem of puncturing low-density parity-check codes and propose a new algorithm for intentional puncturing. The algorithm is based on the puncturing of untainted symbols, i.e. nodes with no punctured symbols within their neighboring set. It is shown that the algorithm proposed here performs better than previous proposals for a range of coding rates and short proportions of punctured symbols.
A joint scheme for the channel coding and spectrum spreading communication system is proposed in this paper. The Bit Error Rate (BER) performance of the joint proposed scheme is evaluated and compared with the case of channel coding scheme without spectrum spreading. We employ a single Low-Density Parity Check (LDPC) code for the both channel coding and direct sequence spectrum spreading. We show that the BER performance is significantly improved while the complexity does not increase too. The philosophy behind this achievement is that the spectrum spreading techniques provide the ability of c…
We introduce successive cancellation (SC) decoding of product codes (PCs) with single parity-check (SPC) component codes. Recursive formulas are derived, which resemble the SC decoding algorithm of polar codes. We analyze the error probability of SPC-PCs over the binary erasure channel under SC decoding. A bridge with the analysis of PCs introduced by Elias in 1954 is also established. Furthermore, bounds on the block error probability under SC decoding are provided, and compared to the bounds under the original decoding algorithm proposed by Elias. It is shown that SC decoding of SPC-PCs achi…
Low-density parity-check (LDPC) codes are one of the most promising families of codes to replace the Goppa codes originally used in the McEliece cryptosystem. In fact, it has been shown that by using quasi-cyclic low-density parity-check (QC-LDPC) codes in this system, drastic reductions in the public key size can be achieved, while maintaining fixed security levels. Recently, some proposals have appeared in the literature using codes with denser parity-check matrices, named moderate-density parity-check (MDPC) codes. However, the density of the parity-check matrices to be used in QC-LDPC code…
A new construction for moderate density parity-check (MDPC) codes using finite geometry is proposed. We design a parity-check matrix for this family of binary codes as the concatenation of two matrices: the incidence matrix between points and lines of the Desarguesian projective plane and the incidence matrix between points and ovals of a projective bundle. A projective bundle is a special collection of ovals which pairwise meet in a unique point. We determine minimum distance and dimension of these codes, showing that they have a natural quasi-cyclic structure. In addition, we analyze the err…
Algebraic codes such as BCH code are receiving renewed interest as their short block lengths and low/no error floors make them attractive for ultra-reliable low-latency communications (URLLC) in 5G wireless networks. This paper aims at enhancing the traditional adaptive belief propagation (ABP) decoding, which is a soft-in-soft-out (SISO) decoding for high-density parity-check (HDPC) algebraic codes, such as Reed-Solomon (RS) codes, Bose-Chaudhuri-Hocquenghem (BCH) codes, and product codes. The key idea of traditional ABP is to sparsify certain columns of the parity-check matrix corresponding …
This paper basically expresses the core fundamentals and brief overview of the research of R. G. GALLAGER [1] on Low-Density Parity-Check (LDPC) codes and various parameters related to LDPC codes like, encoding and decoding of LDPC codes, code rate, parity check matrix, tanner graph. We also discuss advantages and applications as well as the usage of LDPC codes in 5G technology. We have simulated encoding and decoding of LDPC codes and have acquired results in terms of BER vs SNR graph in MATLAB software. This report was submitted as an assignment in Nirma University
A $q$-ary $(n,k,r)$ locally repairable code (LRC) is an $[n,k,d]$ linear code over $\mathbb{F}_q$ such that every code symbol can be recovered by accessing at most $r$ other code symbols. The well-known Singleton-like bound says that $d \le n-k-\lceil k/r\rceil +2$ and an LRC is said to be optimal if it attains this bound. In this paper, we study the bounds and constructions of LRCs from the view of parity-check matrices. Firstly, a simple and unified framework based on parity-check matrix to analyze the bounds of LRCs is proposed. Several useful structural properties on $q$-ary optimal LRCs a…
Goppa codes are particularly appealing for cryptographic applications. Every improvement of our knowledge of Goppa codes is of particular interest. In this paper, we present a sufficient and necessary condition for an irreducible monic polynomial $g(x)$ of degree $r$ over $\mathbb{F}_{q}$ satisfying $γg(x)=(x+d)^rg({A}(x))$, where $q=2^n$, $A=\left(\begin{array}{cc} a&b\\1&d\end{array}\right)\in PGL_2(\Bbb F_{q})$, $\mathrm{ord}(A)$ is a prime, $g(a)\ne 0$, and $0\ne γ\in \Bbb F_q$. And we give a complete characterization of irreducible polynomials $g(x)$ of degree $2s$ or $3s$ as above, where…
In this paper, two-user Gaussian interference channel(GIC) is revisited with the objective of developing implementable (explicit) channel codes. Specifically, low density parity check (LDPC) codes are adopted for use over these channels, and their benefits are studied. Different scenarios on the level of interference are considered. In particular, for strong interference channel examples with binary phase shift keying (BPSK), it is demonstrated that rates better than those offered by single user codes with time sharing are achievable. Promising results are also observed with quadrature-shift-k…
A product code with single parity-check component codes can be described via the tools of a multi-kernel polar code, where the rows of the generator matrix are chosen according to the constraints imposed by the product code construction. Following this observation, successive cancellation decoding of such codes is introduced. In particular, the error probability of single parity-check product codes over binary memoryless symmetric channels under successive cancellation decoding is characterized. A bridge with the analysis of product codes introduced by Elias is also established for the binary …
