DNA adsorption on solid or liquid surfaces is a topic of broad fundamental and applied interest. Here we study by x-ray reflectivity the adsorption of monodisperse double-stranded DNA molecules a positively-charged surface, obtained through chemical grafting of a homogeneous organicmonomolecular layer of N-(2-aminoethyl) dodecanamide on an oxide-free monocrystalline Si(111) wafer. The adsorbed dsDNA is found to embed into the soft monolayer which is deformed in the process. The surface coverage is very high and this adsorbed layer is expected to display 2D nematic ordering.
The adsorption of DNA or other polyelectrolyte molecules on charged membranes is a recurrent motif in soft matter and bionanotechnological systems. Two typical situations encountered are the deposition of single DNA chains onto substrates for further analysis, e.g., by force microscopy, or the pulling of polyelectrolytes into membrane nanopores, as in sequencing applications. In this paper, we present a theoretical analysis of such scenarios based on the self-consistent field theory approach, which allows us to address the important effect of charge correlations. We calculate the grand potenti…
Attraction between the polycyclic aromatic surface elements of carbon nanotubes (CNT) and the aromatic nucleotides of deoxyribonucleic acid (DNA) leads to reversible adsorption (physisorption) between the two, a phenomenon related to hybridization. We propose a Hamiltonian formulation for the zipper model that accounts for the DNA-CNT interactions and allows for the processing of experimental data, which has awaited an available theory for a decade.
The thermally induced denaturation of DNA in the presence of attractive solid surface is studied. The two strands of DNA are modeled via two coupled flexible chains without volume interactions. If the two strands are adsorbed on the surface, the denaturation phase-transition disappears. Instead, there is a smooth crossover to a weakly naturated state. Our second conclusion is that even when the inter-strand attraction alone is too weak for creating a naturated state at the given temperature, and also the surface-strand attraction alone is too weak for creating an adsorbed state, the combined e…
We have performed chain-growth simulations of minimalistic hybrid lattice models for polymers interacting with interfaces of attractive solid substrates in order to gain insights into the conformational transitions of the polymers in the adsorption process. Primarily focusing on the dependence of the conformational behavior on temperature and solubility we obtained pseudophase diagrams with a detailed structure of conformational subphases. In the study of hydrophobic-polar peptides in the vicinity of different types of substrates, we found a noticeable substrate specificity of the assembly of …
Chemical heterogeneity of solid surfaces disrupts the adsorption of surfactants from the bulk liquid. While its presence can hinder the performance of some formulations, bespoke chemical patterning could potentially facilitate controlled adsorption for nanolithography applications. Although some computational studies have investigated the impact of regularly patterned surfaces on surfactant adsorption, in reality many interesting surfaces are expected to be stochastically disordered and this is an area unexplored via simulations. In this paper we describe a new algorithm for the generation of …
Adsorption of monovalent and multivalent cat- and anions on a deoxyribose nucleic acid (DNA) molecule from a salt solution is investigated by computer simulation. The ions are modelled as charged hard spheres, the DNA molecule as a point charge pattern following the double-helical phosphate strands. The geometrical shape of the DNA molecules is modelled on different levels ranging from a simple cylindrical shape to structured models which include the major and minor grooves between the phosphate strands. The densities of the ions adsorbed on the phosphate strands, in the major and in the minor…
We report a study of reversible adsorption of DNA-coated colloids on complementary functionalized oil droplets. We show that it is possible to control the surface coverage of oil droplets by colloidal particles, by exploiting the fact that during slow adsorption, compositional arrest takes place well before structural arrest occurs. As a consequence, we can prepare colloid-coated oil droplets with a `frozen' degree of loading, but with fully ergodic colloidal dynamics on the droplets. We illustrate the equilibrium nature of the adsorbed colloidal phase by exploring the quasi two-dimensional (2…
Experiments have revealed correlation-driven behavior of DNA in charged solutions, including charge inversion and condensation. This paper presents calculations of a lattice-gas model of charge inversion for the adsorption of charged dimers on DNA. Each adsorption site is assumed to have either a vacancy or a positively-charged dimer attached with the dimer oriented either parallel or perpendicular to the double helix DNA chain. The entropy and charge distributions of these three species are calculated including the lowest order fluctuation corrections to mean-field theory. We find that the in…
The effective charge of a rigid polyelectrolyte (PE) approaching an oppositely charged surface is studied. The cases of a weak (annealed) and strongly charged PE with condensed counterions (such as DNA) are discussed. In the most interesting case of the adsorption onto a substrate of low dielectric constant (such as a lipid membrane or a mica sheet) the condensed counterions are not always released as the PE approaches the substrate, because of the major importance of the image charge effect. For the adsorption onto a surface with freely moving charges, the image charge effect becomes less imp…
DNA adsorption and naturation is modeled via two interacting flexible homopolymers coupled to a solid surface. DNA denatures if the entropy gain for unbinding the two strands overcomes the loss of binding energy. When adsorbed to a surface, the entropy gain is smaller than in the bulk, leading to a stronger binding and, upon neglecting self-avoidance, absence of a denatured phase. Now consider conditions where the binding potentials are too weak for naturation, and the surface potential too weak to adsorb single strands. In a variational approach it is shown that their combined action may lead…
We propose a theoretical investigation of the physical adsorption of neutral comb-polymers with an adsorbing skeleton and non-adsorbing side-chains on a flat surface. Such polymers are particularly interesting as "dynamic coating" matrices for bio-separations, especially for DNA sequencing, capillary electrophoresis and lab-on-chips. Separation performances are increased by coating the inner surface of the capillaries with neutral polymers. This method allows to screen the surface charges, thus to prevent electro-osmosis flow and adhesion of charged macromolecules (e.g. proteins) on the capill…
Adsorption of polymers to surfaces is crucial for understanding many fundamental processes in nature. Recent experimental studies indicate that the adsorption dynamics is dominated by non-equilibrium effects. We investigate the adsorption of a single polymer of length $N$ to a planar solid surface in the absence of hydrodynamic interactions. We find that for weak adsorption energies the adsorption time scales $ \sim N^{(1+2ν)/(1+ν)}$, where $ν$ is the Flory exponent for the polymer. We argue that in this regime the single chain adsorption is closely related to a field-driven polymer translocat…
A general adsorption model is developed to describe the interactions between near-wall fluid molecules and solid surface. This model serves as a framework for the theoretical modelling of the boundary slip phenomena. Based on this adsorption model, a new general model for the slip velocity of fluids on solid surfaces is introduced. The slip boundary condition at a fluid-solid interface has hitherto been considered separately for gases and liquids. In this paper, we show that the slip velocity in both gases and liquids may originate from dynamical adsorption processes at the interface. A unifie…
The mechanism of fluid slip on a solid surface has been linked to surface diffusion, by which mobile adsorbed fluid molecules perform hops between adsorption sites. However, slip velocity arising from this surface hopping mechanism has been estimated to be significantly lower than that observed experimentally. In this paper, we propose a re-adsorption mechanism for fluid slip. Slip velocity predictions via this mechanism show the improved agreement with experimental measurements.
We show the existence of a critical endpoint in the phase diagram of unzipping of an adsorbed double-stranded (ds) polymer like DNA. The competition of base pairing, adsorption and stretching by an external force leads to the critical end point. From exact results, the location of the critical end point is determined and its classical nature established.
The behavior of long DNA molecules in a cell-sized confined space was investigated. We prepared water-in-oil droplets covered by phospholipids, which mimic the inner space of a cell, following the encapsulation of DNA molecules with unfolded coil and folded globule conformations. Microscopic observation revealed that the adsorption of coiled DNA onto the membrane surface depended on the size of the vesicular space. Globular DNA showed a cell-size-dependent unfolding transition after adsorption on the membrane. Furthermore, when DNA interacted with a two-phase membrane surface, DNA selectively …
It is shown that experimentally obtained isotherms of adsorption on solid substrates may be completely reconciled with Lifshitz theory when thermal fluctuations are taken into account. This is achieved within the framework of a solid-on-solid model which is solved numerically. Analysis of the fluctuation contributions observed for hydrogen adsorption onto gold substrates allows to determine the surface tension of the free hydrogen film as a function of film thickness. It is found to decrease sharply for film thicknesses below seven atomic layers.
The adsorption of a single multi-block $AB$-copolymer on a solid planar substrate is investigated by means of computer simulations and scaling analysis. It is shown that the problem can be mapped onto an effective homopolymer adsorption problem. In particular we discuss how the critical adsorption energy and the fraction of adsorbed monomers depend on the block length $M$ of sticking monomers $A$, and on the total length $N$ of the polymer chains. Also the adsorption of the random copolymers is considered and found to be well described within the framework of the annealed approximation. For a …
The aim of the study presented here was the analysis of packings generated according to random sequential adsorption protocol consisting of identical Platonic and Archimedean solids. The computer simulations performed showed, that the highest saturated packing fraction $θ=0.40210(68)$ is reached by packings built of truncated tetrahedra and the smallest one $θ=0.35635(67)$ by packings composed of regular tetrahedra. The propagation of translational and orientational order exhibited microstructural propertied typically seen in RSA packings and the kinetics of 3 dimensional packings growth were …
We examine the phase transition of polymer adsorption as well as the underlying kinetics of polymer binding from dilute solutions on a structureless solid surface. The emphasis is put on the properties of regular multiblock copolymers, characterized by block size M and total length N as well as on random copolymers with quenched composition p of sticky and neutral segments. The macromolecules are modeled as coarse-grained bead-spring chains subject to a short-ranged surface adhesive potential. Phase diagrams, showing the variation of the critical threshold for single chain adsorption in terms …
A solid-state nanopore can electrophoretically capture a DNA molecule and pull it through in a folded configuration. The resulting ionic current signal indicates where along its length the DNA was captured. A statistical study using an 8 nm wide nanopore reveals a strong bias favoring the capture of molecules near their ends. A theoretical model shows that bias to be a consequence of configurational entropy, rather than a search by the polymer for an energetically favorable configuration. We also quantified the fluctuations and length-dependence of the speed of simultaneously translocating pol…
The adsorption of a bottle-brush polymer end-grafted with one chain end of its backbone to a flat substrate surface is studied by Monte Carlo simulation of a coarse-grained model, that previously has been characterized in the bulk, assuming a dilute solution under good solvent conditions. Applying the bond fluctuation model on the simple cubic lattice, we vary the backbone chain length $N_b$ from $N_b=67$ to $N_b = 259$ effective monomeric units, the side chain length $N$ from N=6 to N=48, and the grafting density $σ=1$, i.e., parameters that correspond well to the experimentally accessible ra…
The translocation of double-stranded DNA through a solid-state nanopore may either decrease or increase the ionic current depending on the ionic concentration of the surrounding solution. Below a certain crossover ionic concentration, the current change inverts from a current blockade to current enhancement. In this paper, we show that the crossover concentration for bundled DNA nanostructures composed of multiple connected DNA double-helices is lower than that of double-stranded DNA. Our measurements suggest that counterion mobility in the vicinity of DNA is reduced depending on the three-dim…
We study analytically and by means of an off-lattice bead-spring dynamic Monte Carlo simulation model the adsorption kinetics of a single macromolecule on a structureless flat substrate in the regime of strong physisorption. The underlying notion of a ``stem-flower'' polymer conformation, and the related mechanism of ``zipping'' during the adsorption process are shown to lead to a Fokker-Planck equation with reflecting boundary conditions for the time-dependent probability distribution function (PDF) of the number of adsorbed monomers. The theoretical treatment predicts that the mean fraction …
We use density functional theory to investigate adsorption of liquid mixtures on solid surfaces modified with end-grafted chains. The chains are modelled as freely joined spheres. The fluid molecules are spherical. All spherical species interact via the Lennard-Jones (12-6) potential. The Lennard-Jones (9-3) potential describes interactions of solvent molecules with the substrate. We study the relative excess adsorption isotherms, the structure of surface layer and its composition. The impact of the following parameters on adsorption is discussed: the grafting density, the grafted chain length…
Solid-state nanopores are single molecule sensors that measure changes in ionic current as charged polymers such as DNA pass through. Here, we present comprehensive experiments on the length, voltage and salt dependence of the frequency of double-stranded DNA translocations through conical quartz nanopores with mean opening diameter 15 nm. We observe an entropic barrier limited, length dependent translocation frequency at 4M LiCl salt concentration and a drift-dominated, length independent translocation frequency at 1M KCl salt concentration. These observations are described by a unifying conv…
The adsorption of a collagen fragment on both a hydrophobic, hydrogen-terminated and a hydrophilic, natively oxidised Si surface is investigated using all-atom molecular dynamics. While favourable direct protein-surface interactions via localised contact points characterise adhesion to the hydrophilic surface, evenly spread surface/molecule contacts and stabilisation of the helical structure occurs upon adsorption on the hydrophobic surface. In the latter case, we find that adhesion is accompanied by a mutual fit between the hydrophilic/hydrophobic pattern within the protein and the layered wa…
Liquid adsorption in nanoporous materials induces their deformation due to strong capillary forces. The linear relationship between the liquid pressure and the solid strain (pore-load modulus) provides an experimental technique to determine the mechanical properties of nanosized solids. Puzzling experimental results have often been reported, leading to a severe reconsideration of the mechanical properties of the thin walls, the introduction of surface stresses, and the suggestion of a mutual influence of fluid adsorption and matrix deformation. This work presents a molecular simulation examina…
A liquid crystal continuum modeling framework for icosahedra bacteriophage viruses is developed and tested. The main assumptions of the model are the chromonic columnar hexagonal structure of confined DNA, the high resistance to bending and the phase transition from solid to fluid-like states as the concentration of DNA in the capsid decreases during infection. The model predicts osmotic pressure inside the capsid and the ejection force of the DNA as well as the size of the isotropic volume at the center of the capsid. Extensions of the model are discussed.
The threading of a polymer chain through a small pore is a classic problem in polymer dynamics and underlies nanopore sensing technology. However important experimental aspects of the polymer motion in a solid-state nanopore, such as an accurate measurement of the velocity variation during translocation, have remained elusive. In this work we analysed the translocation through conical quartz nanopores of a 7 kbp DNA double-strand labelled with six markers equally spaced along its contour. These markers, constructed from DNA hairpins, give direct experimental access to the translocation dynamic…
We have studied the adsorption kinetics of the protein amylase at solid/liquid interfaces. Offering substrates with tailored properties, we are able to separate the impact of short- and long-range interactions. By means of a colloidal Monte Carlo approach including conformational changes of the adsorbed proteins induced by density fluctuations, we develop a scenario that is consistent with the experimentally observed three-step kinetics on specific substrates. Our observations show that not only the surface chemistry determines the properties of an adsorbed protein layer but also the van der W…
Physico-chemical study of polymer mixtures formed by a polycation and a zwitterionic copolymer in aqueous solution and upon adsorption onto negatively charged surfaces
In this work we report studies of nitrogen adsorption and desorption onto solid surfaces using computer simulations of the three dimensional Ising model, for systems with complex porous structures at the mesoscopic and microscopic levels. A hysteresis cycle between the adsorption and desorption processes appears and we find that its characteristics are dependent on the geometry of the pore and on the strength of the surface fluid interaction. We obtained also an average adsorption isotherm, which represents a combination of differently shaped pores, and shows robust jumps at certain values of …
An efficient technique for the evaluation of the Gibbs adsorption of a liquid on a solid substrate is presented. The behavior of a water nanodroplet on a silicon surface is simulated with molecular dynamics. An external field with varying strength is applied on the system to tune the solid-liquid interfacial contact area. A linear dependence of droplet's volume on the contact area is observed. Our modified Young--Laplace equation is used to explain the influence of the Gibbs adsorption on the nanodroplet volume contraction. Fitting of the molecular dynamics results with these of an analytical …
We report translocation experiments on double-strand DNA through a silicon oxide nanopore. Samples containing DNA fragments with seven different lengths between 2000 to 96000 basepairs have been electrophoretically driven through a 10 nm pore. We find a power-law scaling of the translocation time versus length, with an exponent of 1.26 $\pm$ 0.07. This behavior is qualitatively different from the linear behavior observed in similar experiments performed with protein pores. We address the observed nonlinear scaling in a theoretical model that describes experiments where hydrodynamic drag on the…
The wetting properties of solid substrates with customary (i.e., macroscopic) random roughness are considered as a function of the microscopic contact angle of the wetting liquid and its partial pressure in the surrounding gas phase. Analytic expressions are derived which allow for any given lateral correlation function and height distribution of the roughness to calculate the wetting phase diagram, the adsorption isotherms, and to locate the percolation transition in the adsorbed liquid film. Most features turn out to depend only on a few key parameters of the roughness, which can be clearly …
Using molecular dynamics simulations, we study the motion of a closely fitting nanometer-size solid sphere in a fluid-filled cylindrical nanochannel at low Reynolds numbers and for a wide range of fluid-solid interactions corresponding to different wetting situations. For fluids that are not completely wetting we observe an interesting and novel adsorption phenomenon, in which the solid sphere, that was initially moving along the center of the tube, meanders across the channel and suddenly adsorbes onto the wall. Thereafter, the adsorbed sphere either {\it sticks} to the wall and remains motio…
A series of well-defined hydrophilic and hydrophobic polyelectrolytes of various chain lengths $N$ and effective charge fractions $f_{eff}$ have been adsorbed onto oppositely charged solid surfaces immersed in aqueous solutions. \emph{In situ} high energy X-ray reflectivity has provided the thickness $h$, the electron density and the roughness of the adsorbed layer in its aqueous environment. In the case of hydrophobic polyelectrolytes, we have found $h\propto N^0 f_{eff}^{-2/3}$, in agreement with a pearl-necklace conformation for the chains induced by a Rayleigh-like instability.
It is hypothesized that nonlinear solid friction between the gel matrix and DNA molecules inhibits the motion of DNA through the nanopores of the gel during electrophoresis. In this article, it is demonstrated that external noise can alleviate the effect of solid friction, thus enhancing the mobility of DNA in an electrophoretic setting. In the presence of noise, the mobility of DNA increases by more than ~113 % compared to conventional electrophoresis. Although at a high power of noise, DNA exhibits Arrhenius kinetics, at a low power of noise, super Arrhenius kinetics suggest the collective b…
In this short note, a correction is made to the recently proposed solution [1] to a 1D biased diffusion model for linear DNA translocation and a new analysis will be given to the data in [1]. It was pointed out [2] by us recently that this 1D linear translocation model is equivalent to the one that was considered by Schrodinger [3] for the Enrenhaft-Millikan measurements [4,5] on electron charge. Here we apply Schrodinger's first-passage-time distribution formula to the data set in [1]. It is found that Schrodinger's formula can be used to describe the time distribution of DNA translocation in…
The problem presented involves the development of a new analytical model for the general fluid-solid temperature jump. To the best of our knowledge, there are no analytical models that provide the accurate predictions of the temperature jump for both gas and liquid systems. In this paper, a unified model for the fluid-solid temperature jump has been developed based on our adsorption model of the interfacial interactions. Results obtained from this model are validated with available results from the literature.
The qualitative solvent- and temperature-dependent conformational behavior of a peptide in the proximity of solid substrates with different adsorption properties is investigated by means of a simple lattice model. The resulting pseudophase diagrams exhibit a complex structure, which can be understood by analysing the minima of the free-energy landscape in dependence of appropriate system parameters.
The experimental results presented in this paper show the influence of the elastic deformation of porous solids on the adsorption process. With p+-type porous silicon formed on highly boron doped (100) Si single crystal, we can make identical porous layers, either supported by or detached from the substrate. The pores are perpendicular to the substrate. The adsorption isotherms corresponding to these two layers are distinct. In the region preceding capillary condensation, the adsorbed amount is lower for the membrane than for the supported layer and the hysteresis loop is observed at higher pr…
Protein adsorption at the solid-liquid interface is an important phenomenon that often can be observed as a first step in biological processes. Despite its inherent importance, still relatively little is known about the underlying microscopic mechanisms. Here, using multivalent ions, we demonstrate the control of the interactions and the corresponding adsorption of net-negatively charged proteins (bovine serum albumin) at a solid-liquid interface. This is demonstrated by ellipsometry and corroborated by neutron reflectivity and quartz-crystal microbalance experiments. We show that the reentran…
Adsorption of small amphiphilic molecules occurs in various biological and technological processes, sometimes desired, the other times unwanted (e.g., contamination). Surface-active molecules preferentially bind to interfaces and affect their wetting properties. We study the adsorption of short-chained alcohols (simple surfactants) to the water-vapor interface and solid surfaces of various polarities using molecular dynamics simulations. The analysis enables us to establish a theoretical expression for the adsorption coefficient, which exponentially scales with the molecular surface area and t…
The irreversible adsorption of polymers to a two-dimensional solid surface is studied. An operator formalism is introduced for chemisorption from a polydisperse solution of polymers which transforms the analysis of the adsorption process to a set of combinatorial problems on a two-dimensional lattice. The time evolution of the number of polymers attached and the surface area covered are calculated via a series expansion. The dependence of the final coverage on the parameters of the model (i.e. the parameters of the distribution of polymer lengths in the solution) is studied. Various methods fo…
We study universal critical adsorption on a solid sphere and a solid cylinder in a fluid at bulk criticality, where preferential adsorption occurs. We use a local functional theory proposed by Fisher, de Gennes, and Au-Yang ($[$C. R. Acad. Sci. Paris Ser. B {\bf 287}, 207 (1978)$]$ and $[$Physica {\bf 101}A, 255 (1980)$]$). We calculate the mean order parameter profile $ψ(r)$, where $r$ is the distance from the sphere center and the cylinder axis, respectively. The resultant differential equation for $ψ(r)$ is solved exactly around a sphere and numerically around a cylinder. A strong adsorptio…
Adsorption properties of chain fluids are of interest from both fundamental and industrial points of view. Density Functional Theory (DFT) based models are among the most appropriate techniques allowing to describe surface phenomena. At the same time Statistical Associating Fluid Theory (SAFT) successfully describes bulk PVT properties of chain-fluids. In this publication we have developed novel version of SAFT-DFT approach entitled RS-SAFT which is capable to describe adsorption of short hydrocarbons on geometrically rough surface. Major advantage of our theory is application to adsorption on…
Hydrodynamic slip of a liquid at a solid surface represents a fundamental phenomenon in fluid dynamics that governs liquid transport at small scales. For polymeric liquids, de Gennes predicted that the Navier boundary condition together with the theory of polymer dynamics imply extraordinarily large interfacial slip for entangled polymer melts on ideal surfaces; this Navier-de Gennes model was confirmed using dewetting experiments on ultra-smooth, low-energy substrates. Here, we use capillary leveling - surface tension driven flow of films with initially non-uniform thickness - of polymeric fi…
The determination of phase behavior and, in particular, the nature of phase transitions in two-dimensional systems is often clouded by finite size effects and by access to the appropriate thermodynamic regime. We address these issues using an alternative route to deriving the equation of state of a two-dimensional hard-core particle system, based on kinetic arguments and the Gibbs adsorption isotherm, by use of the random sequential adsorption with surface diffusion (RSAD) model. Insight into coexistence regions and phase transitions is obtained through direct visualization of the system at an…
Modification of surface properties by polymer adsorption is a widely used technique to tune interactions in molecular experiments such as nanopore sensing. Here, we investigate how the ionic current noise through solid-state nanopores reflects the adsorption of short, neutral polymers to the pore surface. The power spectral density of the noise shows a characteristic change upon adsorption of polymer, the magnitude of which is strongly dependent on both polymer length and salt concentration. In particular, for short polymers at low salt concentrations no change is observed, despite verificatio…
We studied the dynamical response of a nanomechanical resonator to biomolecular (e.g. DNA) adsorptions on a resonator's surface by using a theoretical model, which considers the Hamiltonian H such that the potential energy consists of elastic bending energy of a resonator and the potential energy for biomolecular interactions. It was shown that the resonant frequency shift of a resonator due to biomolecular adsorption depends on not only the mass of adsorbed biomolecules but also the biomolecular interactions. Specifically, for dsDNA adsorption on a resonator's surface, the resonant frequency …
We study the nanoscale behaviour of the density of a simple fluid in the vicinity of an equilibrium contact line for a wide range of Young contact angles between 40 and 135 degrees. Cuts of the density profile at various positions along the contact line are presented, unravelling the apparent step-wise increase of the film height profile observed in contour plots of the density. The density profile is employed to compute the normal pressure acting on the substrate along the contact line. We observe that for the full range of contact angles, the maximal normal pressure cannot solely be predicte…
We present a thermodynamically consistent mesoscopic model of protein adsorption at liquid-solid interfaces. First describing the equilibrium state under varying protein concentration of the solution and binding conditions, we predict a non-trivial (non- monotonic) dependence of the experimentally observable properties of the adsorbed layer (such as the surface density and surface coverage) on these parameters. We subsequently proceed to develop a dynamical model consistent with the equilibrium description, which qualitatively reproduces known experimental phenomena and offers a promising way …
This chapter deals with various aspects related to the adsorption of long chain-like macromolecules (polymers) onto solid surfaces. Physical aspects of the adsorption mechanism are elaborated mainly at thermodynamical equilibrium. The basic features needed in modeling of this adsorption are discussed. We first discuss the adsorption of a single and long polymer chain to the surface. The surface interaction is modeled by a potential well with a long-ranged attractive tail. A simple mean-field theory description is presented and the concept of polymer "blobs" is used to describe the conformation…
The behavior of colloidal particles with a hard core and a soft shell has attracted the attention for researchers in the physical-chemistry interface not only due the large number of applications, but due the unique properties of these systems in bulk and at interfaces. The adsorption at the boundary of two phases can provide information about the molecular arrangement. In this way, we perform Langevin Dynamics simulations of polymer-grafted nanoparticles. We employed a recently obtained core-softened potential to analyze the relation between adsorption, structure and dynamic properties of the…
