The Level-2 Silicon Track Trigger preprocessor (L2 STT) of the D0 detector in Run II is described. It performs a precise reconstruction of charged particle tracks in the Central Fiber Tracker (CFT) and the Silicon Microstrip Tracker (SMT). Events with displaced tracks originating from the decay of long living particles such as B hadrons are triggered on. The presence of b quarks contained in such hadrons is relevant for B physics and crucial as signature of top quark and Higgs boson decays.
CDF实验的硅顶点触发器是一个由150个定制9 U VME板组成的系统，它在15微秒的流水线中重建CDF硅条探测器中的轴向轨迹。SVT的35微米碰撞参量分辨率使CDF的2级触发器能够区分初级和次级粒子，从而收集强子底衰变和粲衰变的大样本。我们回顾了SVT的一些关键设计功能。速度是通过自定义VLSI模式识别，线性化跟踪拟合，流水线和并行处理来实现的。测试和可靠性是由内置的逻辑状态分析和测试数据源在每个板的输入和输出，一个共同的板间数据链路，和一个通用的“合并”板的数据扇入/扇出。通过使用现代FPGA，提高了速度和适应性。
D0 Run II硅微带跟踪器（SMT）有3平方米的硅面积。912个读出模块上的6192个SVXIIe芯片可读出792，576个通道。SMT在D0探测器的全伪快度覆盖范围内提供轨道和顶点重建能力。自2002年4月以来，整个检测器已成功运行。本报告涵盖了调试和运行的经验，最近的电子升级，提高了SMT的稳定性和辐射损伤的估计。
The hit response of silicon vertex and tracking detectors to muon collider beam background and results of a study of hit reducing techniques are presented. The background caused by decays of the 750 GeV/c m+ and m- beams was simulated using the MARS15 program, which included the infrastructure of the beam line elements near the detector and the 10 degree nozzles that shield the detector from this background. The ILCRoot framework, along with the Geant4 program, was used to simulate the hit response of the silicon vertex and tracker detectors to the muon decay background remaining after the shi…
We propose an algorithm, deployable on a highly-parallelized graph computing architecture, to perform rapid reconstruction of charged-particle trajectories in the high energy collisions at the Large Hadron Collider and future colliders. We use software emulation to show that the algorithm can achieve an efficiency in excess of 99.95% for reconstruction with good accuracy. The algorithm can be implemented on silicon-based integrated circuits using field-programmable gate array technology. Our approach can enable a fast trigger for massive charged particles that decay invisibly in the tracking v…
In July 2018 an optimization run for the proposed charm cross section measurement for SHiP was performed at the CERN SPS. A heavy, moving target instrumented with nuclear emulsion films followed by a silicon pixel tracker was installed in front of the Goliath magnet at the H4 proton beamline. Behind the magnet, scintillating-fibre, drift-tube and RPC detectors were placed. The purpose of this run was to validate the measurement's feasibility, to develop the required analysis tools and fine-tune the detector layout. In this paper, we present the track reconstruction in the pixel tracker and the…
The spectrum of laser-plasma generated X-rays is very important, it characterizes electron dynamics in plasma and is basic for applications. However, the accuracies and efficiencies of existing methods to diagnose the spectrum of laser-plasma based X-ray pulse are not very high, especially in the range of several hundred keV. In this study, a new method based on electron tracks detection to measure the spectrum of laser-plasma produced X-ray pulses is proposed and demonstrated. Laser-plasma generated X-rays are scattered in a multi-pixel silicon tracker. Energies and scattering directions of C…
The High-Luminosity LHC will put significant demands on trigger systems. To control trigger thresholds, the CMS Collaboration is designing a novel Level-1 track trigger. The Outer Tracker will use modules with pairs of sensor layers to read out hits compatible with charged particles above 2-3 GeV. The system will combine these front-end trigger primitives to reconstruct tracks, providing a measurement of $p_{\mathrm{T}}$, $η$ , $ϕ$, and $z_{0}$. This presentation will introduce the CMS L1 track finding system: the algorithm and its estimated performance, hardware prototypes, and the unique cha…
The DArk Matter Particle Explorer (DAMPE) is a space-borne particle detector designed to probe electrons and gamma-rays in the few GeV to 10 TeV energy range, as well as cosmic-ray proton and nuclei components between 10 GeV and 100 TeV. The silicon-tungsten tracker-converter is a crucial component of DAMPE. It allows the direction of incoming photons converting into electron-positron pairs to be estimated, and the trajectory and charge (Z) of cosmic-ray particles to be identified. It consists of 768 silicon micro-strip sensors assembled in 6 double layers with a total active area of 6.6 m$^2$…
The inner drift chamber of the BESIII is encountering serious aging problem after five year's running. For the first layer, the decrease in gas gain is about 26% from 2009 to 2013. The upgrade of the inner tracking detector has become an urgent problem for the BESIII experiment. An inner tracker using CMOS pixel sensors is an important candidate because of its great advantages on spatial resolution and radiation hardness. In order to carry out a Monte Carlo study on the expected performance, a Geant4-based full simulation for the silicon pixel detector has been implemented. The tracking method…
Conformal tracking is an innovative and comprehensive pattern recognition technique using a cellular automaton-based track finding performed in a conformally-mapped space. It is particularly well-suited for light-weight silicon systems with high position resolution, such as the next generation of tracking detectors designed for future electron-positron colliders. The algorithm has been developed and validated with simulated data of the CLICdet tracker. It has demonstrated not only excellent performance in terms of tracking efficiency, fake rate and track parameters resolution but also robustne…
In this paper we present a complete characterization of the first batch of Resistive AC-Coupled Silicon Detectors, called RSD1, designed at INFN Torino and manufactured by Fondazione Bruno Kessler (FBK) in Trento. With their 100% fill-factor, RSD represent the new enabling technology for high-precision 4D-tracking. Indeed, being based on the well-known charge multiplication mechanism of Low-Gain Avalanche Detectors (LGAD), they benefit from the very good timing performances of such technology together with an unprecedented resolution of the spatial tracking, which allows to reach the micron-le…
We report on the R\&D for a first prototype of a silicon tracker based on an alternative approach for fast track finding. The working principle is inspired from neurobiology, in particular by the processing of visual images by the brain as it happens in nature. It is based on extensive parallelisation of data distribution and pattern recognition. In this work we present the design of a practical device that consists of a telescope based on single-sided silicon detectors; we describe the data acquisition system and the implementation of the track finding algorithms using available digital logic…
The performance of several trigger counters based on plastic scintillators with silicon photomultiplier readout is investigated with cosmic rays. Efficiency and time resolution are measured using digital waveform analysis. The obtained results are relevant for trigger subsystems of Multi-Purpose Detector (MPD) and Baryonic Matter at the Nuclotron (BM@N) at the NICA heavy-ion collider. The results show very high efficiency and good timing performance of the counters.
The results obtained in laboratory tests, using scintillator bars read by silicon photomultipliers are reported. The present approach is the first step for designing a precision tracking system to be placed inside a free magnetized volume for the charge identification of low energy crossing particles. The devised system is demonstrated able to provide a spatial resolution better than 2 mm.
For the high granularity and high energy resolution, Silicon Strip Detector (SSD) is widely applied in assembling telescopes to measure the charged particles in heavy ion reactions. In this paper, we present a novel method to achieve track recognition in the SSD telescopes of the Compact Spectrometer for Heavy Ion Experiment (CSHINE). Each telescope consists of a single-sided silicon strip detector (SSSSD) and a double-sided silicon strip detector (DSSSD) backed by $3 \times 3$ CsI(Tl) crystals. Detector calibration and track reconstruction are implemented. Special decoding algorithm is develo…
Silicon tracking detectors provide excellent spatial resolution, and so can provide excellent momentum resolution for energetic charged particles, even in compact detectors. However, at lower momenta, multiple scattering in the silicon degrades the momentum resolution. We present an alternate method to measure momentum and alleviate this degradation, using silicon detectors that also incorporate timing measurements. By using timing information between two silicon layers, it is possible to solve for the the radius of curvature, and hence the particle momentum, independent of multiple scattering…
The Dark Matter Particle Explorer (DAMPE) is an upcoming scientific satellite mission for high energy gamma-ray, electron and cosmic rays detection. The silicon tracker (STK) is a sub detector of the DAMPE payload with an excellent position resolution (readout pitch of 242um), which measures the incident direction of particles, as well as charge. The STK consists 12 layers of Silicon Micro-strip Detector (SMD), equivalent to a total silicon area of 6.5m$^2$. The total readout channels of the STK are 73728, which leads to a huge amount of raw data to be dealt. In this paper, we focus on the on-…
The Pixel Detector is the innermost detector of the tracking system of the Compact Muon Solenoid (CMS) experiment at CERN Large Hadron Collider (LHC). It precisely determines the interaction point (primary vertex) of the events and the possible secondary vertexes due to heavy flavours ($b$ and $c$ quarks); it is part of the overall tracking system that allows reconstructing the tracks of the charged particles in the events and combined with the magnetic field to measure their impulsion. The pixel detector allows measuring the tracks in the region closest to the interaction point. The Level-1 (…
We report on the design and test results of a prototype processor for the CMS Level-1 trigger that performs 3-D track reconstruction and measurement from data recorded by the cathode strip chambers of the endcap muon system. The tracking algorithms are written in C++ using a class library we developed that facilitates automatic conversion to Verilog. The code is synthesized into firmware for field-programmable gate-arrays from the Xilinx Virtex-II series. A second-generation prototype has been developed and is currently under test. It performs regional track-finding in a 60 degree azimuthal se…
The hadron-hadron based Future Circular Collider (FCC-hh) is a project with the goal to collide proton-proton beams at a center of mass energy of sqrt(s)=100 TeV with a bunch crossing rate of 25 ns. Some of the major challenges that the FCC-experiments have to tackle are the very large number of pile-up events of around 1000 and the data processing, namely the reduction of the huge data rate of 1-2 PBytes/s whilst keeping the signal efficiencies of interesting processes high. Therefore, smart triggering concepts are needed that not only allow for a significant reduction of pile-up and rate but…
The Silicon Tracker (STK) is a detector of the DAMPE satellite to measure the incidence direction of high energy cosmic ray. It consists of 6 X-Y double layers of silicon micro-strip detectors with 73,728 readout channels. It's a great challenge to readout the channels and process the huge volume of data in the critical space environment. 1152 Application Specific Integrated Circuits (ASIC) and 384 ADCs are adopted to readout the detector channels. The 192 Tracker Front-end Hybrid (TFH) modules and 8 identical Tracker Readout Board (TRB) modules are designed to control and digitalize the front…
In next ten years, the Large Hadron Collider will be upgraded to the High Luminosity LHC (HL-LHC), resulting in ten time more integrated luminosity. To withstand the much harsher radiation and occupancy conditions of the HL-LHC, the inner tracker of the ATLAS detector must be redesigned and rebuilt completely. The design of the ATLAS Upgrade inner tracker (ITk) has already been defined. It consists of several layers of silicon particle detectors. The innermost layers will be composed of silicon pixel sensors, and the outer layers will consist of silicon microstrip sensors. This paper will focu…
The evolution of particle detectors has always pushed the technological limit in order to provide enabling technologies to researchers in all fields of science. One archetypal example is the evolution of silicon detectors, from a system with a few channels 30 years ago, to the tens of millions of independent pixels currently used to track charged particles in all major particle physics experiments. Nowadays, silicon detectors are ubiquitous not only in research laboratories but in almost every high-tech apparatus, from portable phones to hospitals. In this contribution, we present a new direct…
Silicon photomultiplier arrays - a novel photon detector for a high resolution tracker produced at FBK-irst, Italy
在FBK-irst研制了一个硅光电倍增器（SiPM）阵列，它有32个通道，尺寸为8.0 x 1.1 mm^2。每个250 um宽的通道被细分为5 x 22个矩形排列的像素。这些传感器被开发用于读出模块化高分辨率的光纤跟踪器。关键属性，如击穿电压，增益和光子探测效率（PDE）被发现是均匀的SiPM阵列的所有32个通道。如果噪声特性和PDE得到改善，这可以使具有SiPM阵列读出的光纤跟踪器成为可用跟踪器技术的有希望的替代方案。
我们简要介绍了CDF Level 2触发系统的eXtremely Fast Tracker立体声音轨升级。此次升级使3级CDF在线触发系统的2级能够进行全三维轨道重建。使用中央外部跟踪器的立体层提供的信息，我们可以通过要求轨迹在所有三维中与单个顶点一致，以及通过使用轨迹信息来“指向”各种检测器组件，来降低由于假轨迹引起的触发率。我们还将讨论2级立体声跟踪算法在高亮度运行期间以高效率实现降低的触发率的有效性。
Beam test results of the Intermediate Silicon Tracker for sPHENIX
National Central University（中央大学）；Nishina Center for Accelerator-Based Science, RIKEN（理化学研究所理仁加速器科学中心）；RIKEN BNL Research Center（理化学研究所布鲁克海文研究中心）；Department of Mathematical and Physical Sciences, Nara Women’s University（奈良女子大学数理科学系）；Physics Department, Brookhaven National Laboratory（布鲁克海文国家实验室物理系）；Advanced Science Research Center, Japan Atomic Energy Agency（日本原子能研究机构先进科学研究中心）；Department of Physics, Rikkyo University（立教大学物理学系）
During the high-luminosity phase of the LHC (HL-LHC), planned to start around 2027, the accelerator is expected to deliver an instantaneous peak luminosity of up to $7.5\times10^{34}$ cm$^{-2}$s$^{-1}$. A total integrated luminosity of $3000$ or even $4000$~fb$^{-1}$ is foreseen to be delivered to the general purpose detectors ATLAS and CMS over a decade, thereby increasing the discovery potential of the LHC experiments significantly. The CMS detector will undergo a major upgrade for the HL-LHC, with entirely new tracking detectors consisting of an Outer Tracker and Inner Tracker. However, the…
